CNC turning and milling center

Gildemeister Twin 65

Year of construction: 2002, condition: ready for operation (used), Axes: XYZCB (8-axes), max. turning diameter: 250mm, max. turning length: 300mm, bar loader diameter: 65mm, tool system: VDI30/tooth profile, torque: 150Nm, speed: 5000rpm, drive power: 22kW, control: Siemens Sinumerik 840D powerline. Dimensions X/Y/Z: approx. 2430mm/5600mm/2430mm, weight: approx. 13000kg, operating hours: approx. 34624h, spindle hours: approx. 22797h. Djdpfx Afotufbys Doun

Condition: ready for operation (used), Year of construction: 1996, number of axes: 2, This Gildemeister MF twin 65 was manufactured in 1996. It features two turrets, each with 12 tool positions, all motorized-capable, and includes 14 driven tools and 14 tool holders. The machine boasts both spindles in very good condition and a bar passage of 65 mm, complemented by a Cucchi Pietro bar feeder. Contact us for more information about this machine. • 2 turrets (12 + 12 tool positions), all motorized-capable • Bar passage: 65 mm • Both spindles in very good condition • New hydraulic/power unit pump Additional equipment Dusdpfxeyaqr Aj Af Djn • Cucchi Pietro bar feeder • 14 driven tools • 14 tool holders

Condition: used, Year of construction: 2007, controller manufacturer: Siemens, controller model: 840 D, _____ Description: Year of manuf. : 2007 Control : Siemens 840 D Turning diam. : 250 mm Turning length : 650 mm Dujdpfx Ajyamfljf Don In General: Year of construction:2007 Control:Siemens 840 D Bar capacity:65 mm Turning diameter:350 mm Turning length:650 mm Main spindle: Technology:Motor spindle Speed:5,000 rpm Power max.:35 kW Torque max.:370 Nm C-axis:0.001 Bar capacity:65 mm Chuck:Hainbuch Spanntop size 65 Clamping cylinder:Hollow clamping cylinder Sub spindle: Technology:Motor spindle Speed:5,000 rpm Power:26 kW Torque:290 Nm C-axis:0.001 Chuck:Hainbuch Spanntop size 65 Clamping cylinder:Partial hollow clamping cylinder Z-axis:670 mm X-axis:175 mm Tool carrier i (X/Y/Z): Technology:Tool turret, 12 stations Tool holder:VDI 30 Tool drive:4,000 rpm, 11 kW, 28 Nm X-axis:300 Y-axis:80 mm ( +/- 40 mm) Z-axis:650 mm Tool carrier II (X/Z): Technology:Tool turret, 12 stations Tool holder:VDI 30 Tool drive:4,000 rpm, 11 kW, 28 Nm X-axis:180 Z-axis:650 mm Equipment: Chip disposal:Chip conveyor Coolant supply:IKZ system Measuring systems:Direct in all X-axes (glass scales) Bar loader:IRCO Breuning Part removal:Finished part gripper + indexing belt Emulsion mist separator:Mechanical Set-up mode:Electronic handwheel

Condition: good (used), Year of construction: 2008, 1 used CNC turning/milling center Gildemeister type TWIN 65 RG 2 year 2008 with Siemens 840 D Maximum turning length (travel in the Z axis) 650 mm Maximum turning diameter over bed 250 mm Maximum length of travel in the X-axis 300 mm Maximum feed speed X-axis 30 m/min Maximum feed speed Z axis 30 m/min Maximum main spindle power 35 kW Spindle diameter 65 mm Minimum main spindle speed 20 1/min Maximum main spindle speed 5000 1/min Lathe length 7000 mm Lathe width 4700 mm Lathe height 2500 mm Lathe weight 10 t Machine equipment Y axis Dedpfx Afjq T I Izj Dsun Irco loading magazine ILS RBK 1200 mm Workpiece pick-up device Technical data Errors excepted Please note that the machine is sold without chucks, as these remain with the seller!

Condition: used, Year of construction: 2006, Turning length 900 mm Distance between spindles 580 mm Max turning dia. 250 mm Spindle speeds (main spindle) 30-6000 rpm Spindle speeds (Sub spindle) 30-6000 rpm Spindle speeds on live tools 2000 rpm Spindle bore 65 mm Y-axis 670 mm Upper turret w/12 stations Lower turret w/12 stations Live tooling on both turrets - in all stations Controlled tail stock Automatic workpiece extraction Control: Dujdex N A Hljpfx Af Don Siemens Sinumeric 840 D Equipped with: Hainbuch collet chuck on both spindles 2 pcs. 3-jaw chucks Chip conveyor Irco Profimat magazine bar feeder

Condition: used, Year of construction: 2005, Turning length 900 mm Distance between spindles 580 mm Max turning dia. 250 mm Spindle speeds (main spindle) 30-6000 rpm Spindle speeds (Sub spindle) 30-6000 rpm Spindle speeds on live tools 2000 rpm Spindle bore 65 mm Y-axis 670 mm Upper turret w/12 stations Lower turret w/12 stations Live tooling on both turrets - in all stations Controlled tail stock Automatic workpiece extraction Control: Siemens Sinumeric 840 D Equipped with: Hainbuch collet chuck on both spindles Duedpjx N A Ntefx Af Den Chip conveyor Irco Profimat magazine bar feeder

Condition: excellent (used), Year of construction: 2004, Control Siemens Sinumerik 840D Bar capacity 65 mm Speed 5,000 min-1 2 x 12-way turret with driven tool Turret 1 with Y-axis Part collection device Djdpjwh U D Hjfx Af Dsun Belt filter system Chip conveyor Bar loading magazine IRCO Profimat