CNC Turning- and Milling Center

Gildemeister GMX 400

Condition: used, Year of construction: 2003, Technical details: turning diameter: 640 / 400 mm turning length: 1500 mm control: Siemens 840 D Powerline Travel turret No.1 (milling spindle) x/y/z: 550 / 180 (±90) / 1585 mm Swivle angle milling spindle (B-axis): ±120° interpol. ° Rapid traverse feeds turret 1 (milling head) x/y/z: 40/24/60 m/min RPM milling spindle: 12000 1/min power capacity - milling spindle: 12 / 23 kW Torque of milling spindle: 100 Nm Tool magazine for milling spindle (turret 1): 120 HSK-A 63 Tool change time tool/tool, milling spindle: 1,6 s Spindle 1 RPM: 4000 1/min Spindle 1 power: 36/ 45 kW Spindle 1 Torque: 730 Nm Spindle 1 max. bar diameter: 90 Spindle 2 RPM: 4000 1/min Spindle 2 power: 36 / 45 kW Spindle 2 torque: 730 Nm Spindle 2 max. bar diameter: 90 c-axis: 0,001 ° Travel turret 2 x: 225 mm Travel Turret 2 z: 1595 mm RPM of rotary tools turret 2: 4000 1/min no. of tools in turret 2: 12 VDI 40 high-pressure pump: 20 bar total power requirement: 110 kVA weight of the machine ca.: 24 t dimensions of the machine ca.: 9,3 x 4,6 x 3,1 m Accerories Chip conveyor Automatic door High performance turning and milling center with milling head (X, Y, Z, B-Axis), tool magazine with 120 pos. HSK-A 63. Excellent for manufacturing excentric parts. Coolant system with 1000 l tank and coolant system 4 kW. Both spindles have differencial pressure clamping system Steayrest for lower turret dia 8-101 mm. Parts gripper for turret No. 2 with 3-jaw chuck for parts with max. dia. 140 mm. Conveyor belt for finished parts. Bwedjyv Dnkopfx Abbel Preparation for 3D-probe Toolmonitor Artis Machine can be shown under power. *

Condition: good (used), Year of construction: 1998, Parts shown by hand not come. Bjdpswb Aqnsfx Abbowl Technical data are shown on picture.

Condition: good (used), Year of construction: 2004, functionality: fully functional, Gildemeister GMX 400 Year of manufacture: 2004 Control system: Siemens 840 D Powerline Max. turning diameter: 640 mm Turning length: 1,585 mm Standard turning diameter: 400 mm Control: Sinumerik 840D powerline Siemens Distance between centers: 1,930 mm Main spindle: Type: ISM 90 Max. speed: 4,000 rpm Drive power - main spindle: 36 / 45 kW Max. torque: 600 Nm Spindle diameter front bearing: 150 mm Spindle bore: 107 mm Max. bar diameter: 102 mm C-axis: 0.001° Chuck diameter: 315 (max. 400) mm Milling spindle: Max. speed: 12,000 rpm Drive power - milling spindle: 13.2 / 22 kW Max. torque: 100 Nm Tool holder: HSK-A63 Holding torque: 500 Nm y-axis: +/- 110 mm b-axis: +/- 120° c-axis: 1° Bjdpfx Abeytpfzsbswl x-travel: 550 mm Bearing diameter: 80 / 55 mm Tool magazine: Number of tool slots: 120 positions Tool holder: HSK-A63 Max. tool length: 350 mm Chip conveyor Feeds: Rapid traverse X1/Z1: 40/60 m/min Total power requirement: 70 kVA Machine weight approx.: 20.0 t

Condition: used, Year of construction: 1974, max. wheel diameter 400 mm gear width 75 mm total power requirement 25 kW weight of the machine ca. 7 t L O R E N Z (Germany) High Performance Automatic Gear Shaper Model LS 400 Year 1975 Serial No. 12 592 _____ External gear, max. Ø 400 mm (possibly larger) Internal gear dia. 350 mm Gear width, max. 75 mm Module range 0.5 - 6 Length of stroke 82 mm Adjustment of stroke position 0 - 100 mm Distance between shaper spindle and machine body 250 mm Spindle taper MK 5 No. of strokes, roughing/finishing process 118 - 1,000 per min Table size 400 mm Table bore 125 mm Mounting height between table and shaper head 190 / 290 mm Axial travel of tool slide, approx. 295 mm No. of teeth, approx. 12-150 Feed range, tooth depth 0.01 - 0.063 mm/stroke Feed range, rotary feed by Tool-Ø 125 0.125 - 3.15 mm/stroke Spindle drive, approx. 19 kW Total electrical load, approx. 25 kW - 380 V - 50 Hz Weight 7,000 kg Accessories / Special Features * Hydrostatic straight guides with separate hydraulic aggregate. * Built-in raiser plate approx. 100 mm to increase height of shaper head. * Hydraulic universal workpiece clamping device built by RINGSPANN to clamp ring shaped workpieces on the inner diameter with various inserts to accommodate different workpiece diameters. * Stepless Regulation of number of strokes for improving roughing and finishing process * Automatic changeover of number of strokes, and automatic feed changeover for roughing and finishing work in up to 3 cuts. * Automatic and motor-driven fixing of shaping stroke in the upper position after work is finished. Bedpet Hww Djfx Abbjwl * Separate switch and control cabinet. Two-hand start. * Coolant equipment with magnetic chip conveyor and chip collection container. * Various change gears, shaping tool holders, etc. Condition : Satisfactory to Good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. We always have a good selection of gear machines on stock. Please let us know what you need.

Condition: good (used), Year of construction: 1975, max. wheel diameter 630 mm y-travel 560 mm gear width 180 mm max. module 8 min. module 1 workpiece dia. 750 mm table diameter 450 mm draw-in arbor diameter 58 mm spindle stroke 200 mm adjustment range 230 mm distance between table/spindle 225-450 mm taper Morse 4 down feeds 0,03 mm/Hub roll feed 10n: 0,18-0,74 mm/Hub no. of strokes 12n: 47-300 Hub/min electrics - voltage/frequency 380/50 V/Hz Bodsyb Sx Topfx Abbewl weight of the machine ca. 5500 kg The machine was raised by 100 mm.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 0500071, SPECIFICATION Table Size 600 x 320mm X axis traverse 450mm Y axis traverse 350mm Z axis traverse 380mm Spindle BT40 Spindle Speeds 0-8000rpm Bedpfx Abetylazsbswl Spindle Motor 10kW Rapid feed rates all axes 30m/min Toolchanger capacity 12 Tools Toolchanger change time 8 Seconds Approximate Weight 2000Kg   Machine equipped with:- Siemens 810D Shopmill CNC Control 4th axis unit Swarf auger Lighting Coolant system Enclosed guarding

Condition: ready for operation (used), Year of construction: 1970, Gear hobber ZFWZ 6300x40 Manufacturer: WMW-MODUL Model: ZFWZ 6300x40/1 Year of manufacture: 1970 Max. workpiece diameter: 7100 mm Gear width: 1500 mm Max. module: 45 Table diameter: 5300 mm Cutter diameter x width: 400x500 mm Max. helical angle: 45 degrees Hob diameter: 500 mm Hob speeds: 9–63 rpm Total power requirement: 47 kW Machine weight: 160 tons Equipped with standard hobbing head, tangential hobbing head, internal milling head, change gears, supports. Video available. Bwedoxln Iwspfx Abbel

Condition: good (used), Year of construction: 1984, max. wheel diameter 250 mm gear width 275 mm max. module 6 weight of the machine ca. 5,5 t The gear hobbing machine ZFWZ 250 is suitable for the economical production of all hob-processable cylindrical gear types, such a: - spur and helical gear, wormgears and worms, splined shafts, keyed shafts, serrated profiles, chain wheels and ratchet wheels,as well as conical and crowned spur and helical gears. Interchangeable wheels and milling accessories Technical data: - Workpiece diameter (max): 250 mm - Module (max): 6 mm - Axial feed travel (max): 275 mm - Tangential feed travel (max): 100 mm - Tooth helix angle (max): 45 degrees - Milling cutter diameter (max): 145 mm - Milling cutter length (max): 170 mm - Table clamping surface (min): 195 mm - Table clamping surface (max): 470 mm Power Milling cutter speeds - Stepped in 2 ranges: 56 ... 250 rpm - (Standard version): 90 ... 400 rpm - Infinitely variable in 2 ranges: 63 ... 180 rpm - (special version DC motor): 140 ... 400 rpm Weights - Machine net: approx. 5000 kg - Electrical cabinet: approx. 800 kg - Hydraulic unit + coolant tank + chip transport: approx. 700 kg Overall dimensions (with oil mist filter) - Length: Standard version: 3950 mm DC drive: 3450 mm (or 3350 mm according to table) - Width: 3300 mm - Height: Machine: 1980 mm Machine with DC drive: 2150 mm Bwodpfx Absv T Nqajbel Electrical cabinet: 2200 mm

Condition: used, Year of construction: 2002, turning diameter max. 420 mm turning length 1250 mm control INDEX, C 200-4 D swing diameter 630 mm travel x1 320 mm travel z1 1250 mm travel x2 170 mm travel z2 1250 mm travel x3 320 mm travel z3 1250 mm Bwedpfxjt U R Hze Abbel main spindle speed max. 3000 U/min main spindle drive 53 kW spindle passage 102 mm spindle head DIN 55026 Gr. 11 max. torque on the spindle 675 Nm sub spindle - spindle speed range max. 3000 U/min sub spindle drive 53 kW sub spindle - spindle passage 102 sub spindle - spindle head DIN 55026 Gr. 11 sub spindle - spindle torque 675 Nm travel sub spindle 1250 mm feed power X1 14000/Z1 14000 N rapid traverse X1 20/Z1 40 m/min feed power X2 8600/Z2 14000 N rapid traverse X2 20/Z2 40 m/min feed power X3 14000/Z3 14000 N rapid traverse X3 20/Z3 40 m/min numbers of turret head positions Rev. 1 = 12 numbers of turret head positions Rev. 2 = 10 numbers of turret head positions Rev. 3 = 12 number of driven tool stations 12 / 10 / 12 speed of driven tools max. 6000 U/min max. torque 36 / 21 / 36 Nm tool taper DIN 69880 tool taper ø 40 x 63 mm total power requirement 120 kW weight of the machine ca. 19 t dimensions of machine L x W x H 5,77 x 2,47 x 2,62 m Accessories: segment bushing chuck HAINBUCH on main spindle, collet chuck HAINBUCH, SPANNTOP SP on sub spindle, various tool holders (also for driven tools), chip conveyor, coolant - all 3 turrets are prepared for coolant through spindle, but the highpressure coolant pump and tank are not with the machine -

Condition: good (used), I am selling this machine, equipped, already disconnected, stored in stock. Video of the machine can be sent. Bedpfetuipmex Abbowl max. wheel diameter 710 mm max. module 10 Spindle speed : 700-2800 1/ min. Machine weight : 13,500 kg