Universal Tool Milling and Drilling Machine

Friedrich Deckel FP1

Condition: excellent (used), functionality: fully functional, Deckel FP1 milling machine. Very good condition. Fully functional. Kjdpfxsxgdr Ij Ad Nell

Condition: used, Universal tool milling machine DECKEL type FP 1 Kjdedzqb Sopfx Ad Njll Machine no.: 52185 Year of manufacture: 1968 Travel X: 300 mm Y: 150 mm Z: 340 mm Table size: 600 x 250 mm Spindle taper: SK 40 - S20 x 2 Spindle speed: 40-2000 rpm, 16 steps Motor power: 1.0 and 1.4 kW, pole-switchable Mains connection: 380 Volt, 50 Hz - Feed on X and Z axes - Two motor speeds and 8 gearbox speeds - Quill stroke on vertical milling head: 60 mm - Fixed angle table - Coolant system in the machine base - Free-standing control cabinet - Counter support with counter bearing for horizontal milling SK 40 Required space (L x W x H): 1200 x 1100 x 1600 mm Weight: approx. 1000 kg Very good condition

Condition: ready for operation (used), Travel X/Y/Z: 290mm/150mm/330mm, vertical head stroke: 100mm, tool holder: SK40, speed: 2000rpm, feed rate: 500mm/min, rapid traverse: 1200mm/min, table dimensions X/Y: 600mm/195mm, max. table load: 150kg. Machine dimensions X/Y/Z: approx. 1250mm/1200mm/1400mm, weight: approx. 1800kg. On-site inspection is possible. Kjdpfjx Hz Rkox Ad Noll

Condition: ready for operation (used), travel distance X-axis: 300 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 340 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, position of the milling head: SK40, input voltage: 400 V, Deckel FP1 2 axis Active Kledpfx Asvuzg Asd Njl Displacements: X = 300 mm Y = 160 mm Z = 340 mm Speed 40-2000 Rpm Automatic feed and rapid traverse on the X, Y and Z axes. Continuously adjustable. Table dimensions 600 x 260 mm 2 axes Active control, point-to-point control. 3 axis digital readout from Heidehain. Spindle mounting SK40 Deckel mounting (outside thread)

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, 3-Axis Active Linear Control Heidenhain TNC 123 Speed 40 - 2000 rpm, geometrically stepped direct drive with 16 gear stages for maximum torque/milling performance Feed 5 to 500 mm/min, continuously variable Rapid traverse 1.2 m/min Quill: Extendable quill, vertical 60 mm SK40 M16 drawbar thread X/Y/Z axes 300/160/340 mm Ksdpfxsv Nqu Ee Ad Noll Angle table 600 x 210 mm, max. load 200 kg

Condition: good (used), Year of construction: 1987, functionality: fully functional, machine/vehicle number: 5742, - Drilling capacity in St 60, 30 mm - Short spindle MK 3 - Spindle stroke 120 mm - throat depth 293 mm - Table support 420 x 300 mm, 2 T-slots - Machined base plate 320 x 329 mm, 2 T-slots - Distance base plate - drill chuck 1000 mm Kjdpfx Adjq U Swgs Njll - Feed via turnstile - Weight 220 kg - Spindle speed 160 - 2250 rpm - Operating voltage 380 V-50Hz - Infinitely variable speed adjustment by means of adjustment lever - Motor speed in 2 stages, 700/1435 rpm - Tapping device with direction of rotation changeover after reaching the end stops - Coolant system completely installed. - Coolant tank in machine base - Work light with LED - RÖHM drill chuck 1 - 16 mm - New precision machine vice (test winner)

Condition: as good as new (ex-display), Year of construction: 2013, - Universal milling head - Fixed angle table 670 x 320 mm - coolant device - Chip tray - Quill cover - Set of operating tools - Technical Documentation - CE version - Colour: * RAL 5015 - sky blue * RAL 7035 - light gray Special accessories: - SINO 3-axis position indicator: € 1,995.00 - 1 set of adjusting wedges (4 pieces): € 400.00 Technical specifications: Work table: - Clamping surface of the fixed angle table: 670 x 320 mm - T-slots: number / width x spacing: 5/12 x 63 mm Kedpfx Ajg D Rhhjd Nell - Max. Workpiece weight: 150 kg - Vertical clamping surface: 670 x 220 mm - T-slots: number / width x spacing: 3/12 x 60 mm Work spindle: - Horizontal and vertical tool holder: ISO / DIN: 40/2080 - Main drive motor power 100% ED: 1.5 kW Vertical milling head: - Speed ​​range: 45 - 2,240 rpm. - Speed ​​levels: 18 - Manual adjustment of the quill: 60 mm - Swivel range: 360 degrees Travels: - X-axis automatic / by hand: 280/300 mm - Y-axis automatic / by hand: 250/270 mm - Z-axis automatic / by hand: 300/310 mm Feeds: - Feed range: 12.5 - 630 mm / min. - Number of feeds: 18 - Rapid traverse: 1,200 mm / min. Measures and weight: - Length: 1,265 mm - Width: 1,080 mm - Height: 1,620 mm - Weight approx. 1,000 kg Machine inspection / machine acceptance: Before loading the machine SUBJECT TO ERRORS AND PRIOR SALE!