CNC lathe

Emco EMCOTURN E45 with barfeeder

Condition: ready for operation (used), Year of construction: 2008, operating hours: 12,125 h, spindle motor power: 29,000 W, spindle speed (max.): 5,000 rpm, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D, number of axes: 6, This 6-axis EMCO Hyperturn 665MC Plus turn-mill centre was manufactured in 2008. It features a multi-axis CNC system with Y-axis and B-axis for complete machining of turned and milled parts. Equipped with integrated spindle motors on both main and counter spindles, it offers a spindle speed up to 5000 min-1 for the main and 7000 min-1 for the counter spindle. Includes a 24-position tool magazine and SINUMERIK 840D control. If you are looking to get high quality turning and milling capabilities consider the EMCO Hyperturn 665MC Plus machine we have for sale. Contact us for more information about this machine. Additional equipment • Tool turret: 12-position tool VDI 30 radial with directional logic for up to 12 driven tool stations • B-PowerMill: Motorised milling spindle with 24-position tool magazine, 210° swivelling range • Optional tool package: Includes stationary and driven tool holders, collet chuck holders, reducing sleeves, and operating spanners • Hollow clamping cylinder with draw tube / Part ejector and flushing through the counter spindle / Part pick-up device for finished parts • Part pick-up device for finished parts / Coolant device in the chip conveyor / High-pressure pump (14 bar) and fine filter • Flushing pumps (3.7 bar) / Control cabinet air conditioning unit / Electrostatic oil mist separator • Hydraulic unit / Machine light / Interface for foot switch / Signal lamp • Documentation including handwheel, PC keyboard, network preparation, tool monitoring, turning window, cleaning gun • Clamping device for main spindle: Hainbuch BZI 80 centre pull / Machine Benefits Technical Machine Benefits • Counter spindle: 22 kw / counter spindle: 0-7000 rpm • Main spindle: kk 6 (passage 65 mm) / counter spindle: kk 6 Kdsdox D Hwnepfx Abnei • Y-axis travel range: +/- 50 mm • C-axis for main and counter spindle • Counter spindle: 3-jaw chuck 210 mm • Approx. 40 capto c4 holders for milling spindle • Loader lm 1200 • Machine does not have shopturn programming. It must be programmed using iso code, whereby simple cycles are available for drilling, milling, swiveling, etc. • 12-station turret and a milling spindle

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, For sale: Well-maintained EMCO Hyperturn 665 MC Plus with IEMCA Master 880MP-E bar loader, chip conveyor, and high-pressure coolant pumps! Machine was exclusively used for machining brass parts! CNC Turning and Milling Center | EMCO Hyperturn 665 MC Plus with main and sub-spindle, C and Y axes, dual turrets each with 12 driven tool stations! Technical Data: Kdsdpfexzq Ncox Abnsi Swing diameter over bed: 600 mm Swing diameter over cross slide: 500 mm Control: Siemens Sinumerik 840D Max. turning diameter: 430 mm Max. turning length: 744 mm Max. bar capacity: 65 mm Travel - X: 270 mm Travel - Z: 750 mm Travel - X2: 205 mm Travel - Z2: 750 mm Travel - Y: 100 (+/- 50) mm Main spindle speed: 0 - 5,000 rpm Sub-spindle speed: 0 - 7,000 rpm Tool turret: 2x 12 positions, all driven! Tool holder: VDI 30 Upper turret: X, Z, Y axes Lower turret: X, Z axes Sub-spindle traverse (left/right): Z3 axis C11 spindle: 65 mm diameter (hollow chuck cylinder) C12 spindle: 45 mm diameter (solid chuck cylinder) with part ejector Tool turret type: Sauter 2x 14 bar high-pressure pumps Accessories: Complete tooling cabinet with driven and static toolholders as well as carbide inserts and tool holders Collet chucks for main and sub-spindle Full documentation etc. Machine available immediately! Ready for operation! Loading will be handled by us! Transport can be organized upon request!

Condition: good (used), Year of construction: 2007, 1 x loading magazine LNS Kdsdpfxjvt N Dye Abnoi Sprint 555 Year of manufacture: 2007 Bar processing D: 5 - 55 mm Bar length: 3,200 mm Previously attached to a Goodway CNC lathe. The loading magazine can be viewed at any time at our warehouse in Reichenbach

Condition: excellent (used), Year of construction: 2007, 1 x oil-flooded single bar feeder LNS Super Hydrobar 6.65 HS-4,4 Year of manufacture: 2007 In very good condition. Previously installed on Traub TNA 300 Technical data: Diameter: 32/40/48/55/62/68 mm Bar length: 3,100 mm Accessories: Machine feet Kodjvawtpspfx Abnodi Operating manual with circuit diagrams The bar feeder can be inspected at our warehouse in Reichenbach.

Condition: used, Year of construction: 1999, operating hours: 65,090 h, functionality: fully functional, ET365 GS with bar feeder and chip conveyor The machine is fully equipped - Collection tray - High-pressure pump - Control cabinet air-conditioning unit Kdodpfeycvaqex Abnji - Kupa loader - The machine was purchased from a running production operation and has been technically inspected - Geometry measured and all settings adjusted - Wearing parts replaced - All functions checked and adjusted as required The machine is fully operational and ready for immediate production The machine is available immediately

Condition: used, Year of construction: 1996, Bar loader FMB type Turbo ET 425 / 3000 stood on an Emco lathe Kodpfsugv Uasx Abnsdi

Condition: new, Year of construction: 2026, functionality: fully functional, A roller conveyor with height adjustment. Universal use among cutting machines. Machine features For feeding and collecting material worked Very reliable steel rollers in bearings Height adjustment – fits machines of any height Universal use e.g. band saws for metal Technical data Rollers diameter Kjdpfx Absvu R Dqonodi 60×360 mm Number of roller 4 Roller conveyor length 1000 mm Roller conveyor width 450 mm Height adjustment 650–1100 mm Load capacity 900 kg Weight 50 kg

Condition: new, Year of construction: 2026, functionality: fully functional, Roller conveyor with height adjustment. Equipped with durable steel rollers in bearings and with a gauge for measuring cutting length. Machine features For feeding and collecting material worked Very durable steel rollers in bearings Height adjustment – fits machines of any height Kdedpfxovu R Ags Abnoi Universal use e.g. band saws for metal Equipped with a gauge for measuring cutting length Technical data Rollers diameter 60×360 mm Number of rollers 7 Roller conveyor length 2000 mm Roller conveyor width 450 mm Height adjustment 650–1100 mm Load capacity 900 kg Weight 50 kg