Ecokraft RP22 Pelletpress

EcoKraft AG RP22

Turn fine-grained biomass into uniform pellets with a complete pelletizing system: pellet press, material bunker, drum sieve with conveyor belt and big-bag handling, all from one manufacturer.

This EcoKraft RP22 system is built around the second-generation RP22 press, developed for fine-grained biomass. It has built-in steam extraction from the pressing chamber and two central lubrication points, which keeps it compact and easy to operate.

Only one system available. This is a single used system, not ongoing stock. Once sold, it is gone. Pickup and transport slots are limited (press alone: 650 kg).

Best for: pelletizing fine-grained biomass (for example fertiliser, wood or plant-fibre mixes) indoors, protected from the weather, with 400 V three-phase power.
Not suitable for: outdoor use, unattended operation, or explosion-risk areas (no explosion protection is included as standard).

Hfodsz Rwimepfx Ap Esn
What the equipment means in practice:
RP22 GEN2 press, max. 22 kW: powerful press for fine material, with steam extraction from the pressing chamber
Bunker 1 m³ with screw discharge and level sensor: the sensor sends a start/stop signal that controls filling of the press
Vibration pads on compressed air: help prevent material bridging in the bunker
Drum sieve with conveyor belt: screens out fines and collects them in a big bag

Complete package (as supplied by EcoKraft AG):
• Pellet press RP22 with automatic central lubrication
• Pneumatic grease system for 18 kg buckets with 18 kg food-grade grease bucket
• Digital water dosing pump 54 l/h
• Die 6x20 mm, 45° pre-compression
• Material bunker 1 m³ with screw discharge, level sensor and vibration pads
• Drum sieve with conveyor belt 6mm sive + 4 mm sive
• Big-bag racks: 1x Vario 1.0 and 3x Vario 1.5 (stackable)
• Big bags: 1x 90x90x110 cm and 5x 95x95x150 cm

Technical data:
Press: 1.70 x 0.80 x 1.70 m, 650 kg, max. 22 kW, 63 A CEE plug (50 A upstream fuse required), customs tariff no. 84793010
Drum sieve: Ø300 x 1200 mm, height adjustable, side feed left or right, max. discharge height 1800 mm
Conveyor: length 3600 mm, discharge height 2600 mm, belt width 150 mm, 49 cleats, 0.75 kW
Manufacturer: EcoKraft AG, Germany, with manufacturer CE declaration

Condition: used. Bought second hand in like-new condition, then used by us for approx. 500 operating hours. The bunker is a demo unit with light signs of use.
Location: 6064 Kerns (self pick-up, transport by arrangement).
Price: EUR 70,000.

Why you can buy with confidence: approx. 500 operating hours in our own use, complete scope as listed, manufacturer documentation available, in-person inspection in Kerns by appointment.

Inspect and test before you buy: you may verify identity, condition, completeness and operation at inspection or pickup. We guarantee what we control: the system is what this listing says it is, complete and functional when you see it. We do not promise throughput or pellet quality for your material, which is why we ask about your application first.

Speed bonus: buy by October 27, 2026 and receive EUR 2,000 off, so EUR 68,000 instead of EUR 70,000. Valid until October 27, 2026, or until the system is sold.

Action: send us your material, required capacity and destination. We will confirm suitability and provide a transport estimate.