2-axis CNC lathe DOOSAN

DOOSAN PUMA 480L

Condition: ready for operation (used), total height: 3,300 mm, total width: 3,450 mm, total length: 6,000 mm, controller manufacturer: Siemens, empty load weight: 17,000 kg, Model: FTV 850 Koeling door spindel Fjdewxz D Uopfx Abreft Het werkgebied kan in twee secties worden verdeeld 2 magnetische tafels Bewegende kolom, vergelijkbaar met Mazak VTC / Unisign / Hedelius Zware chassisstructuur Longitudinal travel X-axe: 1800 mm Crosstravel Y -axe: 850 mm Travel Z-axe (Height): 800 mm Dimensions clamping space - table: 2300 x 900 mm Universal (2x 360°): ISO 50 Boring head (1 x90°): 19 kW

Condition: used, Year of construction: 2004, Technical details: x-travel: 1500 mm y-travel: 1000 mm z-travel: 1000 mm control for program: TNC 530 spindle hours: noch nicht bekannt h milling head speed: 1: 30 bis 930 und 2: 930 bis 4000 / steples U/min tool taper: horiz./vertical: SK 50 (DIN 69871/Din 69872 Form A) max. torque on the spindle: 1000 Nm spindle head swivable left - right: 90 ° feed: 1 - 6000 mm/min feed power: 30 kN kN rapid traverse: 15 m/min Number of tools: 1 St. table clamping surface LxW: 1600 x 800 mm Fodpfju Nc Riox Abrsft table load: 40 kN kN voltage: 400 V / 50 HZ V total power requirement: 42 kW Weight approx.: 15,2 t compressed air: 6,3 bar dimension machine xH: 3,1 x 4,7 x 2,6 m dimensions: Kühlfilter: 1,9 x 1,6 x 1,4 mm space requirements approx. LxWxH: ca. 38,5 m² m² Applications: Milling, drilling; tapping, boring. with direct coded length measuring systems the guideways of the 3 axes are on flat guideways CTS and external cooling Milling head position controlled +/-90° milling spindle nominal drive power 22 kW with integrated hydraulic power unit up to 100bar operating pressure with coolant unit with filtration, with high pressure pump 60 bar (internal cooling), nominal delivery 20 l/min. and low pressure pump 4 bar (external cooling) as well as spray gun Hinged belt chip conveyor DGS, type SSF 600 P50 Accessories: Measuring probe SK40 Reference tool SK40 Milling head SEMPUCO *

Condition: used, Year of construction: 1990, Machine can be inspected under power Technical details Dimensions: Ø620x2000 SB:105mm Control: Fanuc 10 - T Other: live tooling; 3-jaw chuck Turning diameter: 620 mm Turning length: 2000 mm Spindle bore: 105 mm Turning diameter over cross slide: 470 mm Tool turret - positions: 10 stations Tool holder: VDI 50 Spindle speed range: 17 - 2000 rpm Tailstock: MK 5 Number of driven tools: 5 stations C-axis: full Feed range: 1 - 5000 mm/min Rapid traverse: 12 m/min Total power requirement: 30 kW Machine weight approx. 7,500 kg Space requirements approx. 4,400x2,000x2,250 mm Ffedpfxowz I U Es Abrjt Accessories 3-jaw chuck Ø 315 mm Forkhardt Complete machine documentation Coolant system Chip conveyor

Condition: excellent (used), Year of construction: 1996, travel distance X-axis: 10,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 2,500 mm, table length: 12,000 mm, table width: 1,250 mm, year of last overhaul: 2025, workpiece weight (max.): 20,000 kg, New HeidenHain iTNC530 controller in 2015 New bearing in head September 2025 X/Y/Z Linear measuring system IKZ 15 Bar High pressure coolant Central lubrication Optional 2 x floorplates 6000 x 1250 x 245 mm #9240 T-28 with 5 T Slotts and 250 Jump X-Axis: 10000mm Y-Axis: 1500mm Z-Axis: 2500mm Table Length: 12000mm Table Width: 1250mm Table load: 20000Kg Power on spindle: 37kW Spindle speeds: 3500Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 10000mm/min. Feed rate Y-Axis: 10000mm/min. Feed rate Z-Axis: 10000mm/min. Millinghead auto-index:Orthogonal 1 Degrees 2 sides° Fedpfxsxdcbie Abreft Length: 16000mm Width: 4200mm Height: 6800mm Weight: 60000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), travel distance X-axis: 7,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,500 mm, Manufacturer: CME Model: MH-700 Control: HeidenHain TNC430 Year of manufacture: 2004 Chip conveyor High pressure coolant 25 Bar ATC chain 60 positions Optional magnetic table clamping system Auto index head 1 deg. Specifications Metric US Standard X-axis 7000 mm Ffodpowpkq Esfx Abret Y-axis 1200 mm Z-axis 1500 mm Table length 8200 mm Table width 1050 mm Table load 25000 Spindle power 30 kW Spindle speed 5000 Rpm Tool holder 50 ISO/Bt/Mk Milling head auto-index 1 x 1 ° Dimensions (Estimated) Length 12500 mm Width 5000 mm Height 4000 mm Please note: The information on this page has been provided by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute a representation or contract terms. We recommend verifying all important details.

Condition: excellent (used), Year of construction: 2003, operating hours: 9,100 h, I have for sale a CNC LATHE DMG GILDEMEISTER CTX 310 V3 driven tools. TECHNICAL AND VISUAL CONDITION: Very Good Type: CNC Lathe Manufacturer: GILDEMEISTER Model: CTX 310 V3 Control: Heidenhain Data Pilot 4290 Country of manufacture: Germany Year of manufacture 2003 - Number of machine operating hours 9144 hours Machine parameters: - head: 12 - tools for VDI-30 holders + TurnPlus attachment - max. rpm 5000 /min. Fodpfx Abjvxxhfsroft - C axis - driven tools - hydraulic tailstock - Through spindle - max. turning diameter X axis: 190 mm - max. turning length Z axis: 455 mm - cooling system - hydraulic chuck Three-jaw SMW AutoBlock - spindle bore Fi-50mm - chip conveyor - full programming instructions - Mechanical and Electrical Documentation - Machine weight: 3.8t. - loading included in the price Machine after a full inspection. 100% efficient. Connected and ready to work. WE ALSO TAKE CARE OF ALL PROCEDURES RELATED TO LEASING!!! Stal-Com has been selling, servicing and training CNC machines from the DMG group for 17 years. We specialize in all models of Gildemeister lathes and Deckel Maho Machining Centers. All machines undergo a meticulous technical inspection. Our machines are purchased by customers from all over Europe and part of Asia, in addition to customers from Poland. Each machine can be checked during production because we also do machining. After purchasing a machine in our company, we conduct training for the crew and we can also set up the production of parts at the customer's. We cooperate with many companies on the basis of permanent cooperation to which we supply subsequent machine tools