Pillar Drilling Machine

BERNARDO GB 50 HS

Condition: new, Bernardo geared pillar drill GB 50 HS Drilling capacity in steel: 50 mm Drilling capacity in cast iron: 60 mm Maximum threading size: M42 Drill chuck: 1 - 13 mm / B 16 Morse taper: MK 4 Spindle speed / number of stages: 40 - 2100 rpm / 12 Feed range: 0.1 / 0.2 / 0.3 / 0.4 mm/rev Overhang: 370 mm Distance spindle / table (max.): 600 mm Distance spindle / base plate: 1190 mm Quill stroke: 250 mm Column diameter: 200 mm Table size / T-slot size: 600 x 500 mm / 14 mm Motor power: 2.2 / 2.8 kW Machine dimensions (W x D x H): 700 x 1050 x 2350 mm Weight (approx.): 670 kg Scope of supply Pedod Tm T Hepfx Appjgt • Gear-type drill chuck 1 - 13 mm / B 16 • Drill chuck arbor MK 4 / B 16 • Reducing sleeve MK 4 / 3, MK 4 / 2 • Motorized table lift • Coolant system • Electromagnetic spindle feed • Threading device • Automatic tool ejector • LED machine light • Initial filling with Shell Tellus 46 • Digital speed indicator • Digital depth indicator • Height-adjustable protective shield

Condition: new, Bernardo BM 32 SB pillar drilling machine Maximum drilling capacity: 32 mm Drill chuck: 1 - 16 mm / B 18 Morse taper: MK 4 Pedpfsd Tcchsx Appegt Spindle speed: (12) 150 - 2450 rpm Overhang: 255 mm Swiveling drilling table: 360° Distance spindle / table, max.: 750 mm Distance spindle / base plate: 1210 mm Quill stroke: 120 mm Column diameter: 92 mm Table size / T-slot size: 385 x 335 mm / 14 mm Work surface of base plate: 380 x 335 mm Motor output: S1 100% 1.1 kW / 400 V Motor input: S6 40% 1.6 kW / 400 V Machine dimensions (W x D x H): 450 x 800 x 1730 mm

Condition: new, Year of construction: 2024, bore capacity in steel (diameter) 35 mm throat 320 mm bore stroke 150 mm spindle taper MT 4 table-size 500 x 400 mm spindle turning speed range 75 - 3.010 U/min feed range - boring 0,1 / 0,15 / 0,22 / 0,33 mm/U Pjdpfxjwlvlaj Appsgt quill stroke 150 mm voltage 400 V total power requirement 1,8 kW weight of the machine ca. 275 kg dimensions of the machine ca. 0,70 x 1,00 x 1,95 m - Serial-No.: 138050673 - Electromagnetic feed - Threading device - Machine vice 150 mm - Two clamping screws 14 mm - 9-piece drill cartridge 14.5 mm - 30 mm, MK 2 / MK 3 - Cutting oil spray

Condition: good (used), Jig boring mill, fine boring mill, plate boring mill, table boring mill, boring mill, milling machine, -Table dimensions: 700 x 405 mm -Travel paths: Z 330 mm/Y 410 mm/X 630 mm -Quick stroke: 155 mm -Recording: MK4 -Speeds: 31 - 1500 rpm -Dimensions: 1570/1800/H2600 mm -Weight: 2600 kg Pjdsd Tk Stepfx Appjgt

Condition: good (used), Year of construction: 1985, machine/vehicle number: 16924, Offer 22090 Technical data: - Drilling capacity in steel ST 60 20 mm - Drill spindle holder MK 2 - Drill spindle stroke 120 mm Pjdpfx Ajtz T Dvsppsgt - 4 drill spindle speeds 400 - 2000 rpm - throat depth 250 mm - Max. distance table - drill spindle 720 mm - Table with 2 T-slots 440 x 360 mm - Height adjustable via rack and pinion with hand crank - Drive 380 V / 0.6 kW - Space requirement approx. W 550 x H 1900 x D 850 mm - Weight approx. 260 kg - with: - Drill chuck 3 - 12 mm

Condition: good (used), Year of construction: 1987, machine/vehicle number: 5742, functionality: fully functional, - Drilling capacity in St 60, 30 mm - Short spindle MK 3 - Spindle stroke 120 mm - throat depth 293 mm - Table support 420 x 300 mm, 2 T-slots - Machined base plate 320 x 329 mm, 2 T-slots - Distance base plate - drill chuck 1000 mm Pjdpfxsq U Swgs Appegt - Feed via turnstile - Weight 220 kg - Spindle speed 160 - 2250 rpm - Operating voltage 380 V-50Hz - Infinitely variable speed adjustment by means of adjustment lever - Motor speed in 2 stages, 700/1435 rpm - Tapping device with direction of rotation changeover after reaching the end stops - Coolant system completely installed. - Coolant tank in machine base - Work light with LED - RÖHM drill chuck 1 - 16 mm - New precision machine vice (test winner)

Condition: new, bore capacity in steel (diameter) 32 mm throat 300 mm bore stroke 160 mm morse taper 4 MK table: 460 x 460 mm turning speeds 75 - 3200 U/min engine output 1,5 kW column diameter 125 mm thread M16 ST60 feed 0,10/0,18/0,26 mm/U dimensions 800 x 500 x 2200 mm Psdpfekahu Rox Appsgt weight 350 kg - automatic drill feeds (magnetic clutch) - Height adjustable and angle adjustable table - Movable work table - Integrated cooling system - Powerful engine - 3 hand levers for drilling feed - Safety shield with limit switch - Separate emergency stop - Built-in working lights - Incl. drill chuck 16mm - B16 - Built-in automatic thread cutting.

Condition: new, Bernardo Gear-Driven Bench Drill Press GB 32 STi Technical Specifications Drilling capacity in steel: 32 mm Drilling capacity in cast iron: 35 mm Maximum thread cutting: M20 Drill chuck: 1 - 13 mm / B 16 Morse taper: MK 4 Spindle speed / Number of speeds: 125 - 3030 rpm / 12 Feed range: 0.1 / 0.2 / 0.3 mm/rev Overhang: 325 mm Distance spindle / table max.: 690 mm Distance spindle / baseplate: 1250 mm Quill stroke: 160 mm Column diameter: 120 mm Pjdpfjg Hwmxex Appsgt Table size / T-slot size: 500 x 420 mm / 14 mm Work surface baseplate: 365 x 370 mm Motor output S1 100%: 1.0 / 1.2 kW Motor input S6 40%: 1.5 / 1.8 kW Machine dimensions (W x D x H): 570 x 900 x 2200 mm Weight approx.: 415 kg Scope of delivery • Gear-driven drill chuck 1 - 13 mm / B 16 • Drill chuck arbor MK 4 / B 16 • Reducing sleeve MK 4 / 3, MK 4 / 2 • Coolant system • Electromagnetic spindle feed • Thread cutting device • Automatic tool ejector • LED machine light • Digital speed indicator • Height-adjustable safety guard • Initial filling with Shell Tellus 46

Condition: new, Semi-automatic drilling machine Pedpfxod Rhy Dj Appogt - Precise lifting mechanism for accurate drilling results and demanding applications - Continuously adjustable drilling stroke with automatic return stroke via limit switch - Two-hand safety control - Horizontal and vertical workpiece clamping via foot switch - Automatic or manual operation - Precise positioning adjustment in the Y-axis - Support table on the right/left with scale and folding stops - Available as a multi-spindle drilling machine We would be happy to provide you with a customized offer tailored to your requirements.

Condition: new, Bernardo Gear-Driven Drilling Machine GB 28 S Technical Specifications Drilling capacity max. 28 mm Thread cutting max. M12 Drill chuck 1 - 13 mm / B 16 Morse taper MK 3 Spindle speed (12) 75 - 3200 rpm Overhang 250 mm Distance spindle / table max. 810 mm Distance spindle / base plate 1210 mm Quill stroke 130 mm Column diameter 100 mm Base plate working area 325 x 330 mm Table size / T-slot size 375 x 375 mm / 14 mm Motor output power S1 100% 0.85 / 1.1 kW (400 V) Motor input power S6 40% 1.1 / 1.5 kW (400 V) Machine dimensions (W x D x H) 450 x 600 x 2020 mm Weight approx. 215 kg Scope of delivery • Gear-driven drill chuck 1 - 13 mm / B 16 • Drill chuck arbor MK 3 / B 16 • Reducing sleeve MK 3 / 2 • Automatic tool ejector • Threading device Pedpod Du T Aofx Appsgt • Right/left hand operation • Height-adjustable protective cover • LED machine light