Machining center

Axon LU-800

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 172822052, SPECIFICATION Trunnion table size 600mm diameter X axis traverse 600mm Y axis traverse 600mm Z axis traverse 500mm A axis tilt +120 deg/-120deg C axis rotation 360 degree Maximum table load 600Kg Spindle BT 40 Fedpfjt Dmlfex Af Dofu Maximum spindle speed 15,000rpm Spindle motor 22.4kW Maximum spindle torque 239Nm at 1100rpm Spindle motor 35kW Rapid feed rate X,Y,Z axis 36m/min Rapid feed rate C axis 540 degrees a second (90 rpm Rapid feed rate A axis 99 degrees a second (16.6rpm) Toolchanger capacity 32 tools Approx. weight 9500kg   MACHINE EQUIPPED WITH:- Siemens 840DSL CNC control system with Shop Mill Through spindle coolant, 20 bar Swarf Conveyor Laser toolsetting Traori-this function keeps the tool in an optimised cutting position relative to the workpiece when 5 axis simultaneous machining Networking Lighting Enclosed Guarding

Condition: good (used), Year of construction: 2014, Technical data shown on photos. Ffedeufp Svspfx Af Dju Parts shown by hand not come.

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, total height: 2,700 mm, total length: 2,800 mm, total width: 3,550 mm, table width: 600 mm, table length: 1,200 mm, table load: 800 kg, overall weight: 7,500 kg, spindle speed (max.): 8,000 rpm, spindle nose: SK40, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Vertical machining center with extensive standard equipment: - FANUC or Heidenhain control - internal coolant supply - SK 40 - 24-position tool magazine, double-arm gripper - Glass scales in all axes - Chip conveyor - Electronic handwheel - Compressed air through the spindle - 30-position tool holder package - Complete 24-position tool equipment - Initial filling of coolant lubricant - Installation-commissioning-training - Guarantee up to 5 years possible Fedpfsvtz Dxox Af Dofu HAITIAN European branch Ebermannsdorf

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 920 mm, table length: 3,000 mm, table width: 1,700 mm, spindle speed (max.): 6,000 rpm, HURCO WinMax Dual CNC TRAVELS Longitudinal travel: 3.200 mm Transverse travel: 2.100 mm Vertical travel: 920 mm WORK AREA Table dimensions: 3.000 x 1.700 mm Table load capacity with uniform distribution: 11.000 kg SPINDLE Maximum spindle power: 60 kW (1 min) Maximum spindle torque: 570 Nm at 1.000 rpm (1 min) Maximum spindle rotation speed: 6.000 rpm Tool holder: ISO 50 DIN 69871 Fedsxtqtlopfx Af Dofu Machine complete with: • 40-station tool magazine • Digital motors and drives (axes and spindle) • Thermal conditioning system for headstock temperature control • Coolant system with supply around the spindle • Water wash gun and water gun Compressed air • Chip evacuation system consisting of a double auger and evacuator • Complete enclosure • Instruction manuals and CE declaration

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 107.44.00.407, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 500 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, workpiece weight (max.): 500 kg, total height: 3,200 mm, total width: 3,200 mm, table width: 600 mm, table height: 2,400 mm, table length: 600 mm, rotational speed (min.): 50 rpm, rotational speed (max.): 20,000 rpm, overall weight: 10,000 kg, spindle speed (max.): 20,000 rpm, spindle motor power: 15,000 W, number of spindles: 1, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The MIKRON UCP 800 Duro, manufactured in 2018, is a high-performance 5-axis machining center equipped with a Heidenhain iTNC 530 control system. The machine offers travel paths of 800 x 650 x 500 mm (X/Y/Z) and features a C-axis with an endless 360° swivel range. The installed spindle/adapter types are NCD 150 PL and NCD 200 PL with HSK-E63 interface. The illustrated table system is currently not mounted. The machine comes equipped with a chip conveyor, a coolant system with filter, as well as complete documentation. The machine is available free loaded on truck (FCA) and has seen very little use overall. The operating hours clearly indicate: Control ON: 30,064 h Machine ON: 10,322 h Program Execution: 4,159 h Drives ON: 7,331 h Spindle ON: 4,231 h Ffsdpex D Ux Tsfx Af Dju The machine is under power and can be demonstrated at any time.

Condition: excellent (used), Year of construction: 2017, WITTMANN BATTENFELD MacroPower 900/8800 Injection Moulding Machine Servo-hydraulic injection moulding machine Clamping force: 9,000 kN (900 tons) 🔹 General Information: Year of manufacture: 2017 Control system: UNILOG B8 Installed power: 53.9 kW Operating hours: only 999 Dry cycle time: 4.0 – 770 sec/mm Machine dimensions (L x W x H): 10,100 × 3,400 × 2,700 mm Machine weight: 35,200 kg 🔹 Injection Unit: Screw diameter: 105 mm Injection volume: 4,545 cm³ Screw rotation speed: 159 rpm Screw L/D ratio: 22 Nozzle stroke / max force: 129 mm / 950 kN Max nozzle travel: 525 mm Number of heating zones: 7 🔹 Clamping Unit: Clamping force: 9,000 kN Max mould opening stroke: 1,800 mm Min / max mould height: 600 mm / 1,200 mm Max daylight (between platens): 2,400 mm Fodpfx Ajwzy N Ujf Defu Tie bar spacing (H × V): 1,450 × 1,100 mm Ejector stroke / force: 300 mm / 165 kN Mould opening force: 300 kN Core pulls: 2

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 700 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 10 m/min, feed rate X-axis: 24 m/min, feed rate Y-axis: 24 m/min, feed rate Z-axis: 15 m/min, controller manufacturer: Fanuc, controller model: 0i, workpiece weight (max.): 3,000 kg, table width: 850 mm, table length: 1,500 mm, table load: 3,000 kg, spindle speed (max.): 600 rpm, number of spindles: 1, number of slots in tool magazine: 24, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Double-column machining center SK50 tool holder Ffedpfxsv I Ucdj Af Dou Torque 630 Nm He Ul Tjv I Ucdjh U Sek Table load 3000 kg 6000 rpm Internal coolant supply Distance between columns 1670 mm Spindle nose to table surface 150-850 mm 45 kW 3 or 4-year warranty

Condition: used, TECHNICAL DETAILS - Number of axes : 3 MILLING SPINDLE - Tool holder type : BT40 Fsdpfx Afeuhbu Uj Djfu - Spindle power : 15 [kW] - Spindle speeds : 12000 [rpm] - Number of spindle hours : 0 [h] LINEAR AXES - Travels on X/Y/Z axes : 900/600/600 [mm] - Rapid traverses rates (X/Y/Z) : 48 [m/min] - Distance table / spindle nose (min./max.) : 100-700 [mm] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 40 - Tool exchange time : 3.8 [sec] TABLE - Table dimensions : 1000 X 600 [mm] - Maximum weight upon table : 650 [kg] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 20 [kW] WEIGHT & DIMENSIONS - Machine floor space : 3500 X 2400 [mm] - Machine height : 3000 [mm] - Machine weight : 7000 [kg] EQUIPMENT - CNC : Fanuc Oi MD - Interface : RS232 / USB - Interactive programming : Manual guide Oi,10,4 - Electronic handwheel - Rigid tapping - 3 colors status lamp - Coolant tank * with high-pressure pump : 20 [bars] * with paper filtering unit - Coolant through spindle - Micro-lubrification coolant - Chips conveyor

Year of construction: 2022, condition: ready for operation (used), A CNC vertical machining center Akira Performa with a counter bearing on the A-axis is available. Travel X/Y/Z: 2060mm/850mm/815mm, spindle-table distance: 120mm-935mm, table dimensions X/Y: 2150mm/800mm, max. table load: 3240kg. Spindle power: 42kW, speed: 8000rpm, tool holder: BT50, rapid traverse X/Y/Z: 36m/36m/30m/min, positioning accuracy: 0.015mm, repetition accuracy: +/-0.005mm. Tool positions: 28, max. tool diameter: 100mm/200mm, max. tool length: 350mm, max. tool weight: 15kg. Machine dimensions X/Y: approx. 5000mm/3550mm, weight: approx. 14500kg, control: Siemens 828, documentation available. On-site inspection is possible. Ffsdpfxov Ubqbo Af Deu

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 5 h, load capacity: 1,600 kg, lifting height: 4,620 mm, free lift: 1,520 mm, fuel type: electric, mast type: triplex, construction height: 2,108 mm, fork length: 1,150 mm, empty load weight: 1,340 kg, total length: 1,964 mm, drive type: Elektro, construction width: 820 mm, High Lift Truck Load Center: 600 Fork Width: 560 mm Mast Type: Triplex Condition: New Technical Condition: New Front Tire Type: Polyurethane Front Tire Condition: 80 - 100% Rear Tire Type: Polyurethane Rear Tire Condition: 80 - 100% Battery Voltage: 24V Battery Ah: 150Ah Battery Type: Lithium-Ion Battery Year of Manufacture: 2025 Ffodpfx Afowi Acge Deu Battery Condition: 80 - 100% Initial Lift, Full Free Lift, CE Certificate, Maintenance-Free Lithium-Ion Battery