Vertical machining center

KAFO CV-9A

Condition: as good as new (ex-display), Year of construction: 2024, General Tool magazine : 2x chain magazine with 32 stations each Rapid traverse in X/Y/Z : 48 m/min Traverse path X/Y/Z : 800/900/620 mm Spindle Technology : Direct drive Speed : 15.000 rpm Tool holder : HSK-A63 NC rotary table Technology : Swivel rotary table with torque drive, made by Kessler A-axis : +/- 120 C-axis : 360° Clamping surface : ø800 mm Table load (max.) : 1,000 kg Workpiece dimensions (max.) : ø800 x 500 mm Equipment Distance measuring system : Direct (glass scales) in all axes Chip management : Chip conveyor Coolant management : IKZ system with filter and high pressure, 18 bar Workpiece measurement : Touch probe, Heidenhain TS 740 Tool measurement : Laser, BLUM Set-up mode : Electronic handwheel Additional equipment : Spindle cooler Djdour Ng Uspfx Afyecd

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 172822052, SPECIFICATION Trunnion table size 600mm diameter X axis traverse 600mm Y axis traverse 600mm Z axis traverse 500mm A axis tilt +120 deg/-120deg C axis rotation 360 degree Maximum table load 600Kg Spindle BT 40 Maximum spindle speed 15,000rpm Spindle motor 22.4kW Maximum spindle torque 239Nm at 1100rpm Spindle motor 35kW Rapid feed rate X,Y,Z axis 36m/min Rapid feed rate C axis 540 degrees a second (90 rpm Rapid feed rate A axis 99 degrees a second (16.6rpm) Toolchanger capacity 32 tools Approx. weight 9500kg   MACHINE EQUIPPED WITH:- Siemens 840DSL CNC control system with Shop Mill Through spindle coolant, 20 bar Swarf Conveyor Laser toolsetting Traori-this function keeps the tool in an optimised cutting position relative to the workpiece when 5 axis simultaneous machining Networking Djdpfxst Dmlfe Afyecd Lighting Enclosed Guarding

Condition: good (used), Year of construction: 2014, Technical data shown on photos. Parts shown by hand not come. Dedpsufp Svefx Afyocd

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 107.44.00.407, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 500 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, workpiece weight (max.): 500 kg, total height: 3,200 mm, total width: 3,200 mm, table width: 600 mm, table height: 2,400 mm, table length: 600 mm, rotational speed (min.): 50 rpm, rotational speed (max.): 20,000 rpm, overall weight: 10,000 kg, spindle speed (max.): 20,000 rpm, spindle motor power: 15,000 W, number of spindles: 1, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The MIKRON UCP 800 Duro, manufactured in 2018, is a high-performance 5-axis machining center equipped with a Heidenhain iTNC 530 control system. The machine offers travel paths of 800 x 650 x 500 mm (X/Y/Z) and features a C-axis with an endless 360° swivel range. The installed spindle/adapter types are NCD 150 PL and NCD 200 PL with HSK-E63 interface. The illustrated table system is currently not mounted. The machine comes equipped with a chip conveyor, a coolant system with filter, as well as complete documentation. The machine is available free loaded on truck (FCA) and has seen very little use overall. The operating hours clearly indicate: Control ON: 30,064 h Machine ON: 10,322 h Program Execution: 4,159 h Drives ON: 7,331 h Dcedpfx Ajx D Ux Tofyed Spindle ON: 4,231 h The machine is under power and can be demonstrated at any time.

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, total height: 2,700 mm, total length: 2,800 mm, total width: 3,550 mm, table width: 600 mm, table length: 1,200 mm, table load: 800 kg, overall weight: 7,500 kg, spindle speed (max.): 8,000 rpm, spindle nose: SK40, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Vertical machining center with extensive standard equipment: Dedpfx Aevtz Dxofyjcd - FANUC or Heidenhain control - internal coolant supply - SK 40 - 24-position tool magazine, double-arm gripper - Glass scales in all axes - Chip conveyor - Electronic handwheel - Compressed air through the spindle - 30-position tool holder package - Complete 24-position tool equipment - Initial filling of coolant lubricant - Installation-commissioning-training - Guarantee up to 5 years possible HAITIAN European branch Ebermannsdorf

Condition: excellent (used), Year of construction: 2017, WITTMANN BATTENFELD MacroPower 900/8800 Injection Moulding Machine Type: Servo-hydraulic injection moulding machine Year of manufacture: 2017 Control system: UNILOG B8 INJECTION UNIT • Screw diameter: 105 mm • Screw stroke: 525 mm • Screw L/D ratio: 22 • Calculated shot volume: 4,545 cm³ • Injection pressure: 1,931 bar • Max. screw speed: 167 rpm • Max. plasticising rate (PS): 151 g/s • Screw torque: 8,000 Nm • Nozzle stroke / closing force: 950 mm / 129 kN • Injection flow rate: 725 cm³/s • Injection flow rate with dual pump (option): 906 cm³/s • Open-air injection flow rate with tank (option): 1,812 cm³/s • Barrel heating capacity: 53.9 kW • Number of heating zones: 7 CLAMPING UNIT • Clamping force: 9,000 kN • Max. opening stroke: 2,100 mm • Min./Max. mould height: 500–1,000 mm • Platen dimensions: 1,720 × 1,550 mm • Tie bar spacing: 1,200 × 1,000 mm • Ejector: stroke 300 mm / force 165 kN • Mould opening force: 300 kN Djdpfx Aowzy N Usfyscd GENERAL DATA • Pump power: 90 kW • Heating power: 53.9 kW • Hydraulic oil tank capacity: 1,100 l • Machine dimensions (L × W × H): 10,100 × 3,400 × 2,700 mm • Weight: 35,200 kg

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 700 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 10 m/min, feed rate X-axis: 24 m/min, feed rate Y-axis: 24 m/min, feed rate Z-axis: 15 m/min, controller manufacturer: Fanuc, controller model: 0i, workpiece weight (max.): 3,000 kg, table width: 850 mm, table length: 1,500 mm, table load: 3,000 kg, spindle speed (max.): 600 rpm, number of spindles: 1, number of slots in tool magazine: 24, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Double-column machining center SK50 tool holder Torque 630 Nm He Ul Tjv I Ucdjh U Sek Dedpsv I Ucdjfx Afyocd Table load 3000 kg 6000 rpm Internal coolant supply Distance between columns 1670 mm Spindle nose to table surface 150-850 mm 45 kW 3 or 4-year warranty

Year of construction: 2022, condition: ready for operation (used), A CNC vertical machining center Akira Performa with a counter bearing on the A-axis is available. Travel X/Y/Z: 2060mm/850mm/815mm, spindle-table distance: 120mm-935mm, table dimensions X/Y: 2150mm/800mm, max. table load: 3240kg. Spindle power: 42kW, speed: 8000rpm, tool holder: BT50, rapid traverse X/Y/Z: 36m/36m/30m/min, positioning accuracy: 0.015mm, repetition accuracy: +/-0.005mm. Tool positions: 28, max. tool diameter: 100mm/200mm, max. tool length: 350mm, max. tool weight: 15kg. Machine dimensions X/Y: approx. 5000mm/3550mm, weight: approx. 14500kg, control: Siemens 828, documentation available. On-site inspection is possible. Dedov Ubqbepfx Afyjcd

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 5 h, load capacity: 1,600 kg, lifting height: 4,620 mm, free lift: 1,520 mm, fuel type: electric, mast type: triplex, construction height: 2,108 mm, fork length: 1,150 mm, empty load weight: 1,340 kg, total length: 1,964 mm, drive type: Elektro, construction width: 820 mm, High Lift Truck Load Center: 600 Fork Width: 560 mm Mast Type: Triplex Condition: New Technical Condition: New Front Tire Type: Polyurethane Front Tire Condition: 80 - 100% Rear Tire Type: Polyurethane Rear Tire Condition: 80 - 100% Battery Voltage: 24V Battery Ah: 150Ah Battery Type: Lithium-Ion Battery Year of Manufacture: 2025 Battery Condition: 80 - 100% Initial Lift, Full Free Lift, CE Certificate, Dcsdpfx Afswi Acgeyjd Maintenance-Free Lithium-Ion Battery

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, BOB-Mill M8 Model/Mold Making Engraving and Milling Center in Gantry Construction TECHNICAL DETAILS X-axis travel: 700 mm Y-axis travel: 800 mm Z-axis travel: 330 mm Spindle speed: 27,000 rpm Control unit: Mitsubishi E 80 Spindle nose to table: 110 – 440 mm Door width: 760 mm Worktable size: 800 x 600 mm Table load capacity: 400 kg Dcedpfsxv Su Nsx Afyed Number of T-slots: 5 T-slot size: 18 mm T-slot spacing: 115 mm Spindle taper: BT30 12-position tool changer Feed rate: 0–10,000 mm/min Rapid traverse X / Y / Z: 15,000 mm/min Positioning accuracy: ± 0.005 / 300mm Repeatability: ± 0.003 mm MACHINE DETAILS Spindle motor power: 7.5 kW 3-axis motor power X / Y / Z: 1.5 x 1.5 x 1.5 kW Machine weight: 4,300 kg Dimensions: 2,000 × 2,500 × 2,400 mm