CNC moving column milling machine

ANAYAK HVM 7000

Condition: used, CNC Gantry-Type Boring and Milling Machine ANAYAK Type HVM-3800-P Bed type milling machine, structure similar to a plate-type boring mill with fixed table Machine No.: M-20021203 Year of manufacture: 2002 ("Refurbished 2025") The machine will be completely workshop overhauled in 2025 and can then be inspected in storage at 37235 Hessisch Lichtenau. Travel distances: X: 3,200 mm, Y: 1,200 mm, Z: 1,500 mm Table size: 3,800 x 1,200 mm T-slots: 8 pieces, 22 mm, spacing 130 mm Table load: max. 25 tons (stationary table – virtually unlimited load capacity) Spindle taper: ISO 50 (DIN69871-A) (drawbar: DIN 69872-B) Spindle speed: 60 – 4,000 rpm, stepless Feed rate: up to 10,000 mm/min, stepless Rapid traverse X + Y: 20 m/min Rapid traverse Z: 10 m/min Spindle drive: 22 / 30 kW Electrical connection: 400 Volt, 50 Hz, 50 kVA Iiedpfsxcgtgox Af Sok - Automatic tool changer for 30 tools - Spindle drive with 2 speed ranges - With automatic tool changer and tool magazine - Orthogonal milling head with hydro-mechanical tool clamping - Orthogonal milling head fully automatic swiveling in two 45° planes – B+C axis - HEIDENHAIN iTNC 530 control, with electronic handwheel - Prepared for wireless touch probe (probe and receiver not included) - Additional HF-spindle, 18,000 rpm – for attachment - Free-standing control cabinet - Chip conveyor positioned between the gantry bed and the machine table - 32,078 operating hours recorded - Coolant system - Free-standing hydraulic unit - Operating manual with circuit diagrams Installation area (L x W): approx. 1,000 x 700 cm Installation height: approx. 410 cm Weight (total): approx. 33 tons Good condition

Condition: good (used), Year of construction: 2008, Traverses X Y Z: 3000 x 1300 x 2000mm, Table 2000 x 1600mm, table load 13,000 kgs, B axis 360 degrees, Heidenhain iTNC530, ISO SK50 spindle taper, 5,000rpm Spindle Speed, Iiodpjvz A Riofx Af Sek 60 station toolchanger, coolant, Interlocked guards.

Condition: good (used), Max Diameter: M6 Max thread length: 42mm Max length of rods: 75mm Year: 80's Iedpfx Afjhtal Re Sjik

Condition: used, Year of construction: 1995, x-travel 2000 mm y-travel 425 mm Iisdpfx Afer D Tu Io Sek z-travel 425 mm Number of working hours lässt sich nicht auslesen h cooling Kühlung ja max. 10.500 ja control Simens Sinumerik 810 weight 6700 kg

Condition: excellent (used), Year of construction: 2013, Heidenheim TNC 530, SK 40, 12,000 rpm, 40 tool positions, through-spindle coolant, direct measuring system on all axes, central lubrication system, automatic loading doors, measuring probe, Iijdpfx Asxfqyvsf Sok

Condition: excellent (used), Year of construction: 2005, operating hours: 71,034 h, functionality: fully functional, High-quality 5-axis machining center CHIRON MILL 2000 immediately available. Including rotary table. The machine has a particularly demanding maintenance history and operated in a two-shift system. X / Y / Z travel: 2,000 / 500 / 550 mm Max. pendulum operation: 2 × 750 mm Rapid traverse: 40 m/min Feed force X/Y: 5,000 N Feed force Z: 10,000 N Working area with NC-swivel head B-axis ±100° Resolution: 0.001° Repeatability: ±10'' Drive torque: 280 Nm Clamping holding torque: 1,400 Nm Travel X: 2,000 mm Travel Y: 480 mm Travel Z vertical/horizontal: 630 / 715 mm Distance spindle taper – swivel axis: 185 mm Distance spindle taper – table surface: 90 mm Distance spindle axis – table surface: 190 mm Distance reference point – table center: 230 mm Distance table center – end of travel: 250 mm Spindle Tool holder: HSK 63 Power: 22 kW Speed range: 20–12,000 rpm Max. torque: 140 Nm Front spindle bearing Ø: 70 mm Tool clamping force: 6,500 N Projection spindle to cover: 220–720 mm Distance spindle taper – table surface: 90–640 mm Tool system Tool stations: 20 (option 40) Max. tool Ø: 75 mm Max. tool Ø with free adjacent positions: 125 mm Max. tool length: 280 mm Max. tool weight: 8 kg Tool change time: 1.5 s Chip-to-chip time: 5 s Machining capacity Drilling capacity in ST60 (carbide): 42 mm Tapping: M30 Milling capacity in ST60: 600 cm³/min Clamping area / base table Length: 2,600 mm Width: 550 mm T-slots: 2 × 18 H12 Reference slot: 18 H8 Table height: 900 mm Supply / Dimensions Coolant tank: 200 l Total power consumption: 20 kVA Machine weight approx.: 9.5 t Compressed air connection: 6 bar Total length: 5,159 mm Cabin width: 2,495 mm Overall height: 2,500 mm Control panel width: 2,870 mm Control panel height: 1,830 mm Option High-Speed Package Rapid traverse: 60 m/min Chip-to-chip time: approx. 4 s Iedpfexiwf Hox Af Sjik Tool stations: 40 Y travel: 630 mm Accessories: No tools or tool holders included. Mecatool included. Clamping devices and fixturing system only available upon separate request.

Condition: used, Year of construction: 2006, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 550 mm, Chiron MILL 2000 Machining Center For sale is a Chiron MILL 2000 machining center from 2006. The machine is in good condition and ideally suited for the machining of large and long workpieces. Manufacturer: Chiron Model: Mill 2000 Year of manufacture: 2006 Technical specifications: • Travel: X 2000 mm / Y 500 mm / Z 550 mm • Spindle: 12,000 rpm HSK 63 • NC swivel head • Tool magazine: 40 positions (chain magazine) • Control: Siemens • Machine weight: approx. 9,600 kg Equipment: • 40-position tool magazine • Chip conveyor and coolant system • NC swivel head • High-pressure system Condition & Service: The machine is fully operational and available immediately. Loading and transport can be arranged. Location: Germany (Stuttgart area) Iisdexcpy Nopfx Af Sok Price: negotiable

Condition: used, Year of construction: 1998, travel -x axis 5.000 mm travel -y axis 2.800 mm travel -z axis 1.500 mm control HEIDENHAIN TNC426CB number of spindle speeds 20 - 3.000 U/min table length 4.000 mm table width 2.000 mm max. table load 20.000 kg Isdpfexrvl Djx Af Seik tool taper ISO SK50 numbers of positions in the tool changer 100 Dimensions (L x W x H) 9.800 x 6.200 x 7.100 mm machine weight ab. 31.600 kg Travelling column milling machine | SORALUCE - FS-5.000 The machine is in very good condition. A machine video from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: FS 5.000 | FS5.000 | FS 5000 | FS5000

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 7,000 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 1,400 mm, feed length X-axis: 7,000 mm, feed length Y-axis: 1,600 mm, feed length Z-axis: 1,400 mm, Complete with all assemblies required for installation and commissioning x = 7 m y = 1.6 m z = 1.4 m (800 mm + quill = 600 mm) General overhaul in 2007, year of manufacture 1991 Rapid traverse: 12,000 mm/min; w-axis: 6,000 mm/min Fitted with new Siemens Sinumerik 840D control system, new drive motors, refurbished guideways, and new control cabinets. ECOCUT 1 was only operated for a few hours thereafter. TDV 2 rotary table, max. workpiece weight 6 t / clamping area 1,000 x 1,000 mm Iiodpfjw Dhm Hsx Af Sek TDV 3 rotary table, max. workpiece weight 12 t / clamping area 1,250 x 1,600 mm Accessories: 2 right-angle milling heads / chain-type automatic tool changer / platen table / full enclosure / Knoll hopper feeding system / extraction unit / coolant system with belt filter. Supplied with all BWF fixtures required for installing the machine bed and clamping plate.