Condition: excellent (used), Corner jointing machine Pressta Esiele PV10 Cjlol Skl Isq Nrq Tjgt shipping EU ~300euro

Year of construction: 2005, Condition: used, Maximum cutter diameter: 300 mm Manual milling feed Angle stop infinitely adjustable with locking points Max. release depth: 110 mm Max. profile height: 190 mm Max. cutter package height: 95 mm Cjleu T N D Usq Nrq Tjgt Pneumatic material clamps Spray device

Condition: ready for operation (used), Technical characteristics 2 straight welding heads, one mobile head CN command Adjustment for heating time, hardening, welding temperature, fusion and cutting pressure ascending heating plate rapid changing in function of elements width Cslq Nsundfworq Togt Power and Motors Power: 4 Kw Overall dimensions

Condition: excellent (used), Corner jointing machine Elumatec EP 124 Cgelqeh Rnh Dj Nrq Tjt shipping EU ~300euro

Year of construction: 1994, Condition: used, 3-sided machining in one setting Speed: 12,000 revolutions per minute 2 pneumatic tracers at the bottom, 1 tracer at the top Pneumatic material clamping Minimum quantity spray device Milling area vertical (top): 330 x 130 mm Milling area horizontally (from the front or rear): 220 x 95 mm Stroke: 110mm With side stops (dismantled) Cgjlq Nreu T Hibsq Tot Weight: about 350 kg

Condition: ready for operation (used), Technical characteristics Cgelq Nrqoundf De Tst knives and milling unit Power and Motors Overall dimensions

Condition: excellent (used), GRAULE AKF 6/300 Fräser-Ø 250 mm shipping EU ~300 euro Cgelq Nel Skk Horq Tet

Condition: used, Hydropneumatic operation Max. punching height: 90 mm Abutment stroke: 100 mm Punching stroke: 20 mm Pressing force: 30 kN Max. profile height: 100 mm Weight: approx. 280 kg Cgjlqsu T E Snj Nrq Tet

Condition: ready for operation (used), Technical characteristics cutting group on central motorized beam, 2 speeds cutting height 50 mm with water jet mobile pusher and support 200 mm for small width parts (200 mm) ideal machine for securite and foliated glazing Longueur de coupe6000 mm Hauteur de coupe3700 mm Cgolq Njundgnorq Tjt Diamètre lame340 mm Power and Motors Overall dimensions

Year of construction: 2009, Condition: good (used), 5-axis machining center with tool changer for aluminum or PVC profiles Max. processing length: 10,300 mm Travel Y-axis: 1150 mm Travel Z-axis: 715 mm A-axis swivel angle: 0° - 180° Angle C-axis: 0° - 180° Max. Speed 24,000 rpm Spindle power: 21 kW Celq Netvrc Ssrq Togt Tool changer with 13 standard and 7 special tools Saw blade diameter: 500 mm minimum quantity spraying Tensioner detection and automatic displacement 12 pneumatic material clamps Pendulum operation through two light barrier areas Manual control console Spindle in very good condition Loading is included in the price Weight: approx. 11,500 kg

Condition: ready for operation (used), Technical characteristics Works with IDRACAM software Axis X, course 3550 mm Axis Y, course 1100 mm Axis Z, course 425 mm Electrospindle rotation : 0°/90°/180° Work capacity : Axis X = 3500 mm Axis Y = 540 mm with electrospindle in vertical position at 90° Axis Y = 460 mm with electrospindle in horizontal position 0° or 180° Axis Z = 300 mm with electrospindle in vertical position at 90° Axis Z = 250 mm with electrospindle in horizontal position 0° or 180° Axis displacement : Axis X : 80 m/mn, acceleration 2,8 m/s Axis Y : 25 m/mn, acceleration 2,8 m/s Axis Z : 25 m/mn, acceleration 2,8 m/s Spindle : ISO 30 DIN 69871 Power : 4 kW Cjlqeundhls Nrq Togt Rotation speed : 12000 tr/mn 6 tool holder charger tool changing time : 8 secondes Maximum tool weight : 5 kg Max tool diameter : 220 mm Air Pressure : 7 bars Machine at CE normatives Power and Motors Power: 7 Kw Overall dimensions Lenght: 5000 mm Width: 1785 mm Height: 2470 mm

Condition: ready for operation (used), Technical characteristics CNC motorized vertical tilt 22.5-30° external and 90° internal Cgelq Nreundf Rjq Tst CNC motorized movement of THK sliding head Intermediate workpiece support Blade diameter : 500 mm 2 x 2.2 kW motors, 2800 RPM Minimum cutting length at 90° : 225 mm Minimum cutting length at 22° : 310 mm Maximum cutting length : 5000 mm Mobile control panel Sawing speed (peripheral blade speed) : 66 m/s (with 450 mm blade) and 74 m/s (with 500 mm blade) Carriage translation speed : 20 m/min Power and Motors Voltage: 400 V Pluging: Three-phased Power: 5,3 Kw Motor: 2 x 3 CV Overall dimensions Weight: 1400 Kg

Condition: ready for operation (used), Technical characteristics Blade diameter 450 mm Double left and right CN tilting 90° - 22/30° Stop ruller and entry and exit roller table Caractéristiques débitNumerical command Power and Motors Celqsundgzj Nrq Tegt Overall dimensions

Condition: ready for operation (used), Technical characteristics AXIS TRAVEL X AXIS (longitudinal) (mm) 4300 Y AXIS (cross) (mm) 270 Z AXIS (vertical) (mm) 300 Colq Nrqsundg Uo Tsgt ELECTRO-SPINDLE Max. power rating (S1) (kW) 5,5 Max. power rating Max. speed (rpm) 20000 Tool taper HSK 63F AUTOMATIC TOOL MAGAZINE Max. number of tools in the tool magazine 4 standard Max. number of angle machining heads loadable in the tool magazine 2 Max. blade diameter loadable in the tool magazine (mm) Ø 180 FUNCTIONS Multi-piece operation MACHINABLE FACES With straight tool (top face) 1 With angle machining head (side faces and ends) 2 + 2 With blade tool (side faces and ends) 2 + 2 TAPPING CAPACITY (with tap on aluminium and through hole) With compensating chuck M8 Rigid WORKPIECE CLAMPING Standard number of vices 4 Max. number of vices 6 Power and Motors Pluging: Three-phased Overall dimensions Lenght: 5000 mm Width: 1300 mm Weight: 2000 Kg

Condition: ready for operation (used), Technical characteristics Colqsundfks Nrq Togt table extention maximum crimping height 100 mm Power and Motors Overall dimensions

Condition: ready for operation (used), Technical characteristics Oleo-pneumatic blade feed Vertical pressure cylinders Adjustable blade exit height Pneumatic rotation lock -30°/90°/+25 Protective housing Cutting Ø 130 mm max Section 20 x 220 at 90° or 120 x 100 at 90 Roller tables available Ideal for verandas and special cuts Diamètre lame400 mm Power and Motors Power: 3 Kw Cgelq Njundghsrq Tst Overall dimensions

Condition: ready for operation (used), Technical characteristics Welding machine: Welding of a frame (4 x 90° angles) in one automatic work cycle for the positioning of the profiles and digital positioning of the welding heads Fully automatic evacuation system of the welded frames The machine complies with CE safety standards and the four welding heads are equipped with a cover to ensure perfect protection of the operator All types of profiles (programmed KBE and PROFIALIS) Welding capacity: height 200 mm - width 140 mm Cgolq Nrqsundd Ho Tst Dimensions: inside 150 x 250 mm - outside 3150 x 3600 mm Welding parameters are individually adjustable on each welding head Electronic adjustment and control of the welding parameters on the screen Electronic temperature control of the welding plates and the limiting knives with digital display and alarm on the control panel Automatic adaptation of the welding time to the profile section Compensation system per profile piece to eliminate cutting tolerances (+5 / -2 mm) Perfect bead limitation for white, colored or structured profiles Automation - error-free production File from your frame program, barcode reader "Desired size = welded size" allows for optimized cutting of the panels Possibility to generate a production report per period Machine control by PLC - PC of the latest generation Diagnostic system on screen (text and figures) Deburring machine : All types of profiles and combinations Speed and automation: high precision of the tool guides on 4 axes Automation of the control system Electronic recognition of the profile type Selection of the profile type by means of barcode label or online Automatic detection of crossbars High-frequency motors, adjustable speeds without interval All movements and speeds are adjustable from the control panel Selection of grooving or flat finishing as standard on the machine PLC control - PC of the last generation with INTEL processor Diagnostic system on screen Easy programming of new machining and profiles Power and Motors Overall dimensions

Condition: ready for operation (used), Technical characteristics inferior milling countour milling of interior angles with tilting and curved surfaces Power and Motors Cslq Nrqeundfqs Tsgt Overall dimensions

Condition: ready for operation (used), Technical characteristics Double loading Cgelqjundgus Nrq Tet Advance by pneumatical tightening 2 motors Double blade : 250 and 175 mm Tables Power and Motors Voltage: 380 V Pluging: Three-phased Power: 3,5 Kw Overall dimensions

Condition: ready for operation (used), Technical characteristics Upper vertical spindle 12000 rpm Pneumatic workpiece clamping Jig and copy finger 8 mm collet Stop in X and Y Useful strokes: X = 310 mm, Y = 120 mm, Z=175 mm Clamping 175 x 230 mm Spray nozzle Recent machine in perfect condition, first hand Power and Motors Voltage: 400 V Pluging: Three-phased Cgslsundg Ijq Nrq Tjt Power: 0,75 Kw Motor: 1 CV Overall dimensions

Condition: ready for operation (used), Technical characteristics 2 knives per head Maximum profile height : 110 mm Maximum crimping knife height : 90 mm 3 vertical pressers Table width : 830 mm Cgelq Nrjundfdoq Tot Aluminium table extensions Length : 1100 mm Foot pedal control Power and Motors Voltage: 400 V Pluging: Three-phased Overall dimensions

Condition: ready for operation (used), Technical characteristics Celq Noundgbsrq Tjgt Blade Ø 550 mm Useful length : 5000 mm Mobile head with motorized movement and electronic management of angles and length Double inclination of the two heads at 45° (internal) and 15° (external) Automatic and semi-automatic cutting with cutting list and intermediate angles PC control panel WINDOWS XP and 10 inches screen Horizontal and vertical pneumatic presses Integral protection Power and Motors Pluging: Three-phased Power: 3 Kw Overall dimensions Lenght: 6600 mm Width: 1900 mm Height: 1830 mm Weight: 2000 Kg

Condition: ready for operation (used), Technical characteristics Designed for conventional drilling and milling processes, as well as copying operations on extruded aluminum profiles and other materials, including steel profiles up to 3 mm thick, steel-reinforced PVC 3-axis movement/machining Useful X travel: 4000 mm Usable Y travel: 360 mm Useful travel in Z: 295 mm 8-position tool loader Cgelq Nrsundhreq Tst 5 workpiece clamps PC control panel Power and Motors Voltage: 380 V Pluging: Three-phased Overall dimensions

Condition: ready for operation (used), Technical characteristics glass framing metal shoening assembly indexing rotating cross brace Vertical roller support Cgjlq Neundd Terq Tet Largeur de profils Max2500 mm Hauteur de profils Max2400 mm Inclinaison80 ° Nombre d'étaux2 Caractéristiques assemblageIntermediate supportPedal command Power and Motors Overall dimensions

Condition: ready for operation (used), Technical characteristics fully automatic center type QUADRA ES205 V04 Bar loading magazine o Max bar length 7500 mm o Minimum bar length 3000 or 1550 mm o Load capacity with axis 100 mm : 20 bars o Load capacity with axis 200 mm: 10 bars o Maximum loadable weight: 500 kg Bar positioning unit Colqoundhfj Nrq Togt o Max bar length : 7500 mm o Minimum length of manually loaded bar: 500 mm o Carriage translation speed: 0.60 m/min Milling section 4 machining units o Drilling o Milling o Tapping up to M8 on thicknesses up to 4 mm (aluminium) o Sawing (aluminium) cut 0/90° and +/- 45 Sawing machine Evacuation section Finished parts magazine Power and Motors Power: 35 Kw Overall dimensions Weight: 8420 Kg