Used Industrial furnaces for metalworking for sale (193)

Condition: used, TECHNICAL DETAILS Ndjdpjug U Tnefx Adcjc - Temperatures : -40 / +180 [°] - Power : 12 [kW] - Inside dimensions : 500 x 500 x 500 [mm]

Year of construction: 1999, condition: ready for operation (used), Volume: 1000l, max. temperature: 750°C, heating capacity: 40kW, machine dimensions X/Y/Z: approx. 2500mm/1600mm/1900mm, weight: approx. 2000kg. Documentation available. An on-site inspection is possible. Expected to be available from October/November 2025. Nedpfew Emyzjx Adcjdc

Year of construction: 2007, condition: repair required (used), functionality: not functional, Belt width: 650 mm, usable height: 220 mm, heated length: 3250 mm. The furnace has 3 heating zones and a heating capacity of 125 kW. The furnace has been stored in a hall for several years, and many components need to be sandblasted and repainted. In addition, the interior of the furnace needs to be relined, and some parts need to be newly manufactured. The furnace can also be completely overhauled by us to meet current technical standards. Nodpfxsxdante Adcjdc

Year of construction: 2000, condition: excellent (used), functionality: fully functional, maximum load weight: 7,000 kg, working height: 1,750 mm, The gas nitration vacuum oven is made up of all the steps involved in gas nitration, carburizing, and tempering. The machine is in very good condition. Ndedpfxju T N Efe Adcjc

Condition: used, Manufacturer: DEMAK Housing size: 6600 x 2100 mm Maximum temperature: 200 °C In the past, the oven was part of a plant and the product was transported via a conveyor belt, Ndedpfx Adovgy Ivscjc The oven was previously controlled by PLC, it was dismantled,

Year of construction: 2010, condition: ready for operation (used), Usable space: 7.7m³, max. temperature: 250°C, heating output: 54kW, volume flow: 15m³/min. Ndsdpsilhucsfx Adcsc

Year of construction: 2017, condition: good (used), functionality: fully functional, For sale is a carousel oven (Paternosterofen) from the brand Eliog, model PNO 80. This oven is a custom-built solution. Designed for warming components, equipped with a carousel handling system and control cabinet. Also suitable for drying or dehydrating food and cannabis. The system was installed in 2017 and has only been used occasionally since around 2022. The plant has already been dismantled. Technical specifications: Year of manufacture: 2017 Max. component support area: 65 mm Nominal temperature: 70°C Operating temperature: 70–75°C (At 75°C the utilisation area safety limiter shuts off!) Set conveyor time: approx. 240 min Max. airflow speed: approx. 4 m/s Heating capacity: 72 kW Nominal voltage: 3*400 V, 50 Hz Fresh air supply: Ambient air at the oven Exhaust air: max. 850 m³/h Usable chamber dimensions: 4780*2200*2250 mm Workpiece carriers: 56 pcs. (oven capacity) Max. workpiece weight: 0.3 kg Transport height above floor: 400 mm Heating: 3 kW / heater element, 6 heater elements per control zone-4 (total 72 kW output) Overall dimensions: approx. 4,425*5,425*4,980 mm Space requirement: 5012.4*3919.5*5000 mm Oven weight: approx. 7,500 kg Control cabinet: approx. 450 kg (Images have been modified due to copyright reasons) Transport and loading can be organised across Europe for an additional fee upon request. Prices are plus VAT. Nodpfxoup R U Us Adcedc Inspections are possible by appointment. Please contact us – our team will be glad to assist you. Part exchange or trade-in possible! Machine Purchase & Sale BUYING / SELLING PRODUCTION MACHINERY & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or are you interested in selling yours? For further information or to get in touch, please visit our website.

Year of construction: 2002, condition: excellent (used), functionality: fully functional, Dear Mr./Mrs, we have opportunity to offer you PLATEG plasma (ion) nitriding equipment. Chamber is with hot wall. Equipment is in excellent condition, fully functional, without any problems, ready for use. Equipment characteristic: - Dimensions of construction: 2700 mm x 1250 mm x 800 mm Ndodpfxevfm I Hj Adcec - Dimensions of chamber: Diameter 1000 mm x 1200 mm - Maximum dimension of nitriding batch: Dimeter 900 mm x 900 mm - Total equipment power: 70 kVA - Power of heaters: 30 kW - Power of plasma supply (BIAS): 30 kW - Plasma supply is unipolar, voltage 0-1000V, current 0-60A, DC to 33 kHz, pulse on and pulse off adjustable - Plasma supply (BIAS) is only one year old, bought from Germany (El Connect company) - Vacuum pump: Pffeifer vacuum 65 - Vacuum system is controlled by new electrical cabinet with PLC and HMI - 4 MFC for dosing gasses - Plasma nitriding process, post oxidation process Company Planit is also giving assembly services of this equipment, maintenance manual, user manual, technology (nitriding and oxidation) and also service. For any question, don't hesitate to ask. Best regards.

Condition: refurbished (used), Max. temperature: 420°C Internal dimensions (W x D x H): 400 x 500 x 400 mm Connection value: 4,5 kW Njdpfoxxarzex Adcodc

Year of construction: 2010, condition: excellent (used), Chamber inside 2000 x 1250 x 1250 mm Volume inside 2344 Liter Up to 400 Gr/C (Power 33kW) Nedouqkwfepfx Adcodc   Preheating / Drying For manual, cycle and CNC processing up to interactive contour programmingCovered guidance tracks (DGP) for high long-term precisionDirect drive from motor to main spindle for high running smoothnessOil recirculating lubrication unit with filtering for the lubrication of the precision main spindle bearingCombination control unit for economically advantageous programming and machine operation, as well as optimum access to the work area Length:2500mm Width:2015mm Height:2900mm Weight:4000kg

Condition: used, TECHNICAL DETAILS Ndedpfx Adsug U Tbjcec - Internal dimensions : 320 x 320 x 800 [mm]

Condition: good (used), drying oven, drying cabinet, chamber dryer oven, warming oven, heating chamber, drying oven, drying cabinet, drying and warming cabinet -Manufacturer: MLW, drying cabinet type WSU102 -Usable space: WHD 500x420x435 mm -Heating power: 2.16 kW -Nominal temperature: 320°C -Individual components: see photos -Dimensions: 630/1000/H840 mm -Weight: 118 kg Njdevg Hb Ajpfx Adcodc

Condition: used, TECHNICAL DETAILS Ndedpfjug U Thjx Adcjc Quenching tank for stirring oil quenching - power : 0.25 [kW] - voltage : 3 x 380 [V]

Condition: excellent (used), Rated temperature: 1100°C Usable chamber dimensions (W x D x H): 200 x 300 x 150 mm Nodoy Uwqvopfx Adcedc Electrical connection: 230 V, 1.4 kW Heating-up time: 100 min. Footprint: 752 x 576 x 700 mm Weight: 78 kg

Condition: good (used), Industrial oven, drying oven Type: PKL-1 Maximum temperature: 180 ° C The temperature is adjustable Number of tablets: 10 Size of Table: 70x50 cm Individually lockable electrical latch Oven dimensions: Height: 1450/1900 mm Width: 1250 mm Njdpfed Tiu Iox Adcedc Depth: 850 mm Weight: 350 kg We have 3 pieces on Stock!

Condition: excellent (used), Max. operating temperature: 300°C Internal dimensions (W x H x D): 400 x 380 x 370 mm Internal volume: 57 liters Power consumption: 1.4 kW Electrical connection: 230 V Footprint: 750 x 610 x 550 mm Ndodpfx Adjy Uwr Hscsc Approximate weight: 50 kg

Condition: ready for operation (used), Manufacturer: Beck -external sizes: 1700x1010x1400mm -Permeable cross section: 540x240mm Ndsdpfx Asu Nuyiodcoc -The temperature range: 0-400 °C

Condition: used, heating: electrical useable space: ø400 x 400 mm Njdpfsv Sbc Esx Adcedc temperature: max. 1.300°C ventilation: exhaust fan during the cooling phase and activated cooling fan ultimate vacuum: 10 mbar exhaustion time: ca. 5 min nitrogen: inlet pressure min. 3 bar oxygen: inlet pressure min. 3 bar

Year of construction: 2023, condition: new, El. heated two-track plate pusher furnace, make Riedhammer type: TP12,75/2x20/15-E-145 condition: as new total length of oven: 15.5 m furnace width: 3.6 m voltage type: 400/230V, 50 Hz connected load: 17 kVA tolerated voltage fluctuation: 10% tolerated frequency fluctuation: 1% PLC: SIEMENS/Comfort Panel TP1500-15 Nodpfx Adep T T Hnjcedc product structure (L x W x H) including push plate: 200 x 200x 101 mm Tmax debinding zone (4 segments): 650 °C Tmax pressure compensation zone (1 segment): 750 °C Tmax main combustion zone (6 segments): 1450 °C Tmax cooling module 1: 600 °C Tmax cooling module 2: 300 °C min. push time: 8 min max push time: 30 min number of conveyor plates: 266 pieces channel height: 105 mm

Condition: good (used), Year of construction: 2011, Heated surfacefinishing machine for Zink-magnesium coating Ndjdpfofndpnox Adcjc Tank capacity : 150 l Heating power: 20 kW Weight: 1230 kg

Condition: ready for operation (used), Heat treatment furnace, annealing furnace, furnace, Used equipment Manufacturer: Budapest Electric Cable Factory Overall dimensions: 890 x 1350 x 1510 mm Weight: 785 kg Electrical data: 400 V, Nodpfx Aouhmacodcodc Temperature controller adjustable up to 1100°C +temperature controller in the electrical box

Condition: new, Year of construction: 2025, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, total length: 3,000 mm, total width: 500 mm, total height: 1,300 mm, overall weight: 500 kg, Equipment: CE marking, documentation/manual, For sale is a new and unused HASUNG HS-1139 annealing tunnel furnace / continuous furnace for the professional processing of gold, silver, and other metals or precious metals. The system was originally purchased for our own production of silver bars. It was intended primarily for the continuous annealing or soft annealing of silver bars during the production process. According to the manufacturer's specifications, the tunnel furnace can also be used for the heat treatment of other metals and precious metals, such as gold. The machine was purchased directly from the manufacturer, Shenzhen Hasung Precious Metals Equipment Technology Co., Ltd., and imported to Austria. It was part of a newly acquired production line but was never put into operation by us and has 0 operating hours. The sale is taking place because, after purchasing the system, we decided against the intended production process using a protective gas. The HS-1139 operates as a continuous tunnel furnace. The workpieces are fed through the tunnel furnace via a mesh/conveyor belt. The conveyor speed can be adjusted to the respective production process via a frequency inverter. According to the operating manual, the electric heating reaches a temperature of up to 850 °C. In addition, the system has a protective gas system with ammonia decomposition and a circulating water cooling system. Technical data: Manufacturer: HASUNG Model: HS-1139 Machine type: Annealing tunnel furnace / continuous furnace Application: Annealing / soft annealing of metals and precious metals Suitable for, among others: Silver, gold, and other metals Condition: New and unused Operating hours: 0 h Power: 12 kW Voltage: 380 V Frequency: 50/60 Hz Power supply: 3-phase / AC Max. temperature: 850 °C Dimensions: approx. 3,000 × 500 × 1,300 mm Weight: approx. 500 kg Conveyor system: continuous mesh/conveyor belt Belt speed: adjustable via frequency inverter Cooling: circulating water system Protective gas system: ammonia gas with ammonia decomposition Control: temperature control, frequency control and timer function Documentation and CE documents are available. The existing operating manual and the associated CE documents, including the Certificate of Conformity and test report for the model series, including the HS-1139, will be provided with the machine. The machine is located in Lower Austria, Austria, and is currently not connected. An inspection is possible by arrangement. Ndodpfoz Dfy Ejx Adcjc Collection is preferred. Loading or shipment transport can be arranged upon request. Sale due to a change in our production process.

Condition: good (used), Year of construction: 1987, Drying oven, drying cabinet, chamber dryer oven, heating oven, heating chamber, drying oven, drying cabinet, drying and heating cabinet Ndodjryalbepfx Adcjc -Manufacturer: GFO, chamber dryer oven type KE-SO -Useful space: 1 m³ / 1000x1000x1000 mm -Heating power: 40 kW -max temperature 350°C -Working temperature: 100 to 300°C -Individual components: see photos -Setup dimensions: 2510/1600/H3760 mm -Transport dimensions: 2510/1600/H2380 mm -Weight: 1500kg

Condition: new, Year of construction: 2026, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ Ndjdpfx Adsfz Anpjcsc At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: used, El. heated chamber oven, make Heraeus Nedjxlq Tpjpfx Adcodc Type: PL 320 Temperature: max. 650°C Clear dimensions (W x D x H): approx. 280 x 440 x 200 mm