Sander for curved-line elements

COMEC

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, spindle diameter: 40 mm, Comec FGS-1T CAB Carousel Milling Machine Number of spindles: 1 Kodpsz R Rn Dofx Apiodu Milling spindle motor power: 5.5 kW Spindle speed: 7050 rpm Tool diameter min/max: 120-200 mm Spindle diameter: 40 mm Maximum milling height: 115 mm Workpiece diameter min/max: 110-800 mm Table rotation motor power: 1.5 kW Table rotation speed: 1.65–8.8 rpm Machine dimensions: 1600×1700×2600 mm Machine weight: 1500 kg

Year of construction: 2006, condition: excellent (used), 2 movable spindles Pneumatic pressure Ksdpfx Apshh S Dxoiedu Motors on the inverter

Condition: used, Year of construction: 2002, turning diameter 340 mm turning length 600 mm turning diameter over slide 300 mm control Siemens 840 D spindle passage 55 mm spindle nose ASA 6 number of spindle speeds 4000 U/min spindle motor 27 kW Kdsdpfx Ajxvdraepisu Number of tools 12 VDI 40 driven stations 12 VDI 40 rapid traverse 30 m/min power sub spindle 15 kw CNC- lathe with driven tools an subspindle Driven toolstation cannot be used due to cable breakage - chip conveyor - sub spindle - driven tool stations (not working) - tool measuring

Condition: used, Year of construction: 2008, Manufacturer: COMEC Model: FUST-P-40 Year: 2008 Type: Semi-automatic filling line Containers: Drums, cans, off-centre-neck containers Max. container height: 500 mm Theoretical output: 200 x 20-litre containers per hour Dosing method: Weight-based, using a load cell Weighing range: 0.5 to 30 kg Accuracy: 10 g Calibration: Automatic Filling speeds: 2 (high flow rate / low flow rate within the same cycle) Filling spout: With anti-drip valve Kdsdoz Ic Nfjpfx Apieu Conveying: Roller conveyor Capping: Manual placement, tightened using a hand-held pneumatic screwdriver Control: Control panel FAP-200/1 type feed unit - Filter (cylindrical coil): 500 microns - Pneumatic diaphragm pump - Flow rate: 2 to 4 m³/h - Transport trolley Documentation: Available Video: On request

Condition: used, Comec 3-Spindle Vertical Drill Kdodpfxoy S Adis Apieu Maximum piece length cm. 100

Condition: good (used), Year of construction: 2024, functionality: fully functional, Manufacturer: COMEC Model: MD TOP L CA2 Type: Milling and mortise cutting machine Year of manufacture: 2024 Used, with signs of wear, good condition For sale from the location 07570 Weida Technical data according to the manufacturer: Axes: 3 X-axis: 2,500 mm Y-axis: 250 mm Z-axis: 180 mm Horizontal machining unit Electric spindle for milling with a 3.3 kW motor Milling spindle: 12,000-18,000 RPM, adjustable Tool holder: ER32 Drilling unit with a 1.7 kW motor With 16 individually selectable horizontal spindles, pitch 32 mm Kdsdjz Izm Nspfx Apiju Drill chuck with a diameter of 10 mm Drill: 4,350 RPM Vertical machining unit Electric spindle for milling/drilling/routing with an 8.0 kW motor Tool rotation speed 12,000-18,000 RPM, adjustable With C-axis, interpolating 360 degrees Unit for saw blade with 2 outputs, 180° for drilling or milling tools Unit shank, tapered ISO30 Tools, collet chuck ER32 Vertical electric spindle for drilling with a 1.7 kW motor, 4,350 RPM 1 drilling head with individually selectable spindles, including: 3 vertical drilling spindles in a row, pitch 32 mm 7+7 front/rear, horizontal drilling spindles in a row, pitch 32 mm 2+2 left/right, horizontal drilling spindles in a row, pitch 32 mm Drill chuck, diameter 10 mm with lateral locking pin Clamping system 6 clamping brackets Adjustable on guide rail With 6 clamping cylinders and 6 lateral alignment cylinders with reference stroke Automatic adjustment of the supports via NC control The clamping brackets are fixed or released via program Extra workpiece width Specially designed clamping elements for a workpiece width of 100 mm Workpiece dimensions to be machined Max. cross-section of the workpieces to be machined Length: 2,250 mm Width: 100 mm Thickness: 30 mm Automatic loading system, model CA2 Adjustable on linear guides with a fixed left side and an adjustable right side Vertical parts magazine with automatic loading system and easy access for the operator Workpiece unloading system on 10 slide rails We will gladly send you further technical data and information upon request if you are interested in purchasing. The machining center is currently powered and can be inspected by appointment. Dismantling, loading, and transport are the responsibility of the buyer.

Condition: new, Year of construction: 2026, functionality: fully functional, VSM3.0DRO A-M Valve seat milling machine - new machine. Digital display valve seat milling machine. High precision valve seat milling machine specifically designed for multi-valve cylinder heads. Machining capacity from 16 mm to 90 mm. Variable speed from 100 to 1200 RPM. Max. cylinder head width: 500/19,7 mm/inch Max. cylinder head height: 450/17,7 mm/inch Tilt degree of cylinder head: +42°- -42° Max. tilt degree of spindle: 5° Travel: -Cross: 930/37 mm/inch -Longitudinal: 40/1,6 mm/inch -Spindle: 200/8 mm/inch Spindle power: 1.8 kw Max. rotation speed of spindle: 0-1000 RPM Power supply: 380V/50Hz 3ph vagy 220V/60Hz 3ph Air compressor supply: 6/87 Bar/psi Noisy level: at 400 RPM 72dBA; at 1200 RPM 82dBA Weight: 1050/2310 kg/lb Dimension (L x W x H): 1040 mm x 1050 mm x 2170 mm Kodpfx Aovmpnlspiodu

Condition: ready for operation (used), Year of construction: 2019, Multi-spindle drilling machine manufactured in 2019. This COMEC FMOV 1500 6UF + CA2 features a working width of 1500 mm and a working depth of 300 mm, allowing for efficient processing of long workpieces up to 1500 mm in one cycle. It includes an automatic parts loader and pneumatic clamping for enhanced productivity. If you are looking to get high-quality drilling capabilities, consider the COMEC FMOV 1500 6UF + CA2 machine we have for sale. Contact us for further details. Kdedszuhb Aspfx Apisu • Configuration: 6 multiple heads arranged on 3 working lines • Workpiece capacity: Drilling of long workpieces up to 1500 mm in one cycle • Working width (X): 1500 mm • Working depth (Y): 300 mm • Max. clamping height: 70 mm • Top surface processing: Yes • Horizontal processing: Yes • Interchangeable aggregates: Yes • Positioning: Manual • Drilling feed: Pneumatic • Clamping: Pneumatic • Control: PLC with selectable work cycles • Modularity/customization: High • Cleaning and waste system: Integrated, efficient • Certification: CE Additional equipment • Automatic parts loader (synchronized with the machine cycle)

Condition: used, Year of construction: 1995, functionality: fully functional, Comec FT-CD-CA-650 end-milling machine Number of milling heads per side: 1 Length of workpieces: approximately max/min 650-220mm Automatic material feeding from a feeder Operation based on templates Kdjdpfx Aoz D H Ecepieu

Condition: used, Comec FRO1000 cross-profile milling machine for the precise machining of cross-profiles and shaped millings on solid timber and wood-based materials. The robust construction and the stable milling unit ensure consistently precise profiles in both batch and single-piece production. Technical data: - Working width: approx. 1,000 mm - Spindle diameter: 40 mm - Feed: Pneumatic Ksdpfxeztvxgj Apiodu