Used Edge sanders & profile sanders for sale (165)

Year of construction: 2021, Condition: new, Profile sanding machine Prochera Model: Prochera Type: KSB-2 Bjb Eyehlpu Se Ipaowl Tekn Data: The plaster unit can be set between 90-45 degrees Speed ​​control (stepless) 200-1000 rpm, (potentiometer with digital reading) The table is height-adjustable Spindle shaft 30x248mm Chip extraction min m3 / h Adjustable working height 762 + 950mm Adjustable table level Adjustable height adjustment on the grinding head spindle Motor: 3x400V, 50 Hz Weight: without conveyor 125 kg, with conveyor 145 kg Dimensions of the machine Length 1000mm Width max 869mm Height 1290-1400mm Options: Belt conveyor with overpressure and adjustable feed speed: 1500:- Euro Lagernr: 2000825

Condition: good (used), Aggregate kit, finishing unit, grinding unit, grinding station, belt sander, belt grinder, edge grinder, edge sander, profile sanding unit, small belt sander -Manufacturer: KED Kurt Ehemann, Homag, belt sanding unit from belt sander -Type: unfortunately no type designations -Roll: Ø 215 x 295 mm drum motor NG 45/2n 3 kW 2850 rpm -Roll: Ø 150 x 160 mm Bwsb Ey Isvzqc Hopaol -Individual components: see photos -Transport dimensions: 830/690/H360 mm -Weight: 144 kg

Condition: new, Edge sanding machine KSO 150 M F 3 PRO Holzkraft Promotional model from stock -1x sanding belt K100 -5x rubber rollers Ø25, Ø30, Ø40, Ø45, Ø50 mm -6x sanding sleeves K80 - Ø25, Ø30, Ø35, Ø40, Ø45, Ø50 mm -board tool -Mitre fenceDimensions and weights: - Length (product) approx.: 1820 mm Beb Ey Isu R S Dzepaowl - Width/depth (product) approx.: 1050 mm - Height (product) approx.: 1470 mm - Weight (net) approx.: 400 kg Drive power: - Oscillation motor power: 0.38 kW Suction connection: - Suction nozzle diameter: 150 mm Work table(s): - Worktable length: 1000 mm - Worktable width: 280 mm - Table tilt: 45 / 35 ° Electrical data: - Supply voltage: 400 V - Mains frequency: 50 Hz Sanding unit: - Sanding belt length: 2640 mm - Sanding belt width: 150 mm - Belt speed(s): 14 m/s - Oscillation stroke: 20 mm - Sanding surface length: 890 mm - Sanding surface width: 150 mm - Sanding height max.: 150 mm Subject to prior sale. - new exhibition machine -

Condition: used, Lightweight edge sander Jet type EHVS-80 cs for precise sanding of straight and curved wood edges. The lightweight construction and powerful motor enable a consistent sanding pattern with high removal rates. Ideal for small carpentry shops, furniture construction, and interior design. sanding belt length: 2260 mm Bwjb Ey Ipowffpbsaol Sanding belt width: 150 mm table: Pivotable engine power: 1,5 kW Suction nozzle: 100 mm

Condition: used, Year of construction: 1997, Used Wegoma KS 2400 edge sander Year of manufacture: 1997 Motor power: 1.8 kW Motor speed: 1400 rpm Working length: 800 mm Belt width: 150 mm Belt length: 2400 mm Table size: 660 x 200 mm Bweb Eyjwhd Nxj Ipael Additional table size: 420 x 400 mm Space requirement: 1450 x 1260 mm Weight: 120 kg

Condition: good (used), Code: 0101 Brand: SAMCO Model: UNILEV 15 Universal sanding machine for straight and round edges, drawers, chair and sofa elements, panels and various Technical data: Tilting work tables 0-30 degrees Beb Eyowd Szzj Ipajwl Work table length mm 1440 Belt motor power Kw 3 Belt oscillation 0-25 mm Operating pressure 6 bar Sanding belt length mm 2170 Sanding belt width mm 150 Vertical oscillating unit displacement mm 125 Overall dimensions mm 1500 x 750 x 950 h Weight kg 450

Condition: excellent (used), Comec Cross Feed Sander for Furniture Chair Elements Bsbjwfq Txe Ey Ipajwl Sanding Belt Width 90mm Motor Power 5.5kw

Condition: used, Storage location: Nattheim Bweb Eyjvvklqe Ipajl

Condition: new, total length: 1,700 mm, total width: 1,000 mm, total height: 1,500 mm, table length: 900 mm, table width: 360 mm, input voltage: 400 V, grinding belt length: 2,580 mm, grinding belt width: 150 mm, power: 2.2 kW (2.99 HP), grinding belt speed: 14 mm/s, input frequency: 50 Hz, motor voltage: 400 V, type of motor: three-phase motor, • Sanding unit can be swiveled using a handwheel • The welded steel machine base guarantees high torsional rigidity and vibration-free operation • Oscillating sanding belt with separate gear motor for better sanding results • Oscillation can be optionally activated • Sanding sole with graphite coating for a longer sanding belt service life • Height-adjustable sanding table utilizes the entire sanding belt width • Additional table with extraction openings for sanding radii on the rubberized guide roller • Sanding sleeve device with attachable work table • The spring-loaded belt tension automatically compensates for belt length differences Technical specifications: Dimensions and weights - Length (product) approx. 1700 mm - Width/depth (product) approx. 1000 mm - Height (product) approx. 1150 mm - Weight (net) approx. 250 kg Extraction connection: - Number of extraction nozzles: 2 - Extractor nozzle diameter 100mm Worktable: - Worktable length 900mm - Worktable width 360mm - Worktable height adjustment 110mm Electrical data: - Supply voltage 400V - Mains frequency 50Hz - Oscillation motor power - Sanding unit power 0.11kW - Sanding belt length 2580mm - Sanding belt width 150mm Bwjb Ejwg Dy Iey Ipajl - Belt rotation speed(s) 14m/s - Oscillation stroke 15mm - Sanding surface length 800mm - Sanding surface width 150mm - Sanding height max. 150mm - Sanding unit pivoting 0 – 90° Scope of delivery • 1x Sanding belt K100 • 5x Rubber rollers Ø25, Ø30, Ø40, Ø45, Ø50 mm • 6x Sanding sleeves K80 - Ø25, Ø30, Ø35, Ø40, Ø45, Ø50 mm • Onboard tool kit • Miter gauge If you have any questions, please contact us! Are you looking for a specialist dealer near you? We supply machine dealers throughout Germany, in European and non-European countries with metalworking machines, compressed air technology, woodworking machines, welding technology, as well as cleaning and workshop equipment. Contact us and we will tell you the nearest dealer.

Condition: used, Lightweight edge sander BGU Type KS 226 for precise sanding of straight and curved wood edges. The lightweight construction and powerful motor enable a consistent sanding pattern with high removal rates. Ideal for small carpentry shops, furniture construction, and interior design. sanding belt length: 2.250 mm Bsb Ey Ipjwcry Ujaowl Sanding belt width: 150 mm table: swiveling engine power: 1,5 kW Suction nozzle: 100 mm

Condition: new, Year of construction: 2022, New machine Year of manufacture 2022 The upper part in heavy cast iron construction with built-in three-phase motor 380 V, 2,2kW, 2850 rpm; the machine is equipped with built-in switch-plug combination; motor protection switch and main switch according to VDE; dimensions of the sanding belt back: 850 x 150 mm; steel table adjustable in height by means of adjustable by spring pressure; belt dimension: 150 x 2280 mm; the rear back wall of the sanding belt is covered with a graphite glide coating; the machine is machine is supplied with an assortment of sanding belts; additionally included in the delivery is an angle and miter fence. The machine is equipped with a central central exhaust system with an air velocity of min. 20 m/s dust-tested (GS) Holz-BG-Stuttgart. Standard equipment: - swiveling 90-180 - motorized belt oscillation - small support table at the deflection roller - pneumatic belt tensioning Bsb Ey Ijkwhltepaswl Technical data: motor power: 2,2 kW grinding belt size: 150 x 2280 mm grinding belt speed: 22 m/sec table size: 750 x 350 mm space requirement: 1000 x 800 mm weight: from 180 kg suction Ø: 100 & 80 mm Availability: short term Storage location: Solingen

Condition: new, -Continuously adjustable sanding unit (0 - 90°) for vertical and horizontal sanding -Oscillating sanding belt for better sanding results and a longer service life of the sanding belt -Quick and easy sanding belt change via quick-clamping system -Grinding sole with graphite coating as standard for a longer service life of the sanding belt Bjb Ejvxkv Uey Ipaswl -Work table made of gray cast iron adjustable via handwheel with T-slot -Including side sanding sleeve device for sanding curves and radii -Two suction nozzles Ø 100 mm -1x sanding belt 2750x 150mm grain 80 -1x sanding sleeve Ø38mm grain 80 -1x sanding sleeve Ø50mm grain 80 -1x sanding sleeve Ø75mm grain 80 Dimensions and weights: - Length (product) approx.: 1515 mm - Width/depth (product) approx.: 550 mm - Height (product) approx.: 1150 mm - Weight (net) approx.: 207 kg Extraction connection: - Extraction nozzle diameter: 100 mm Work table(s): - Work table length: 900 mm - Work table width: 305 mm - Work table height adjustment: 120 mm Electrical data: - Connection voltage: 400 V - Mains frequency: 50 Hz Grinding unit: - Sanding belt length: 2750 mm - Sanding belt width: 150 mm - Belt rotation speed(s): 16 m/s - Oscillation stroke: 15 mm - Sanding surface length: 1010 mm - Sanding surface width: 190 mm - Sanding height max.: 170 mm - Sanding unit swivel: 0 – 90 ° Workpiece: - Workpiece width max.: 1010 mm - Workpiece height max.: 150 mm - new exhibition machine -

Condition: excellent (used), Ostrich type vertical sander Bweb Ey Ipowdwm Aoajl Motor power 0.37kw Sanding belt width: 45mm Sanding height: 140mm Distance to machine body: 540mm

Condition: used, Year of construction: 2022, Oscillating cylindrical grinder from hnische specifications. A possible screw variant for spindle sleeve clamping. It is used somewhat similarly to the ProLoc device. Storage location: Customer Bjb Eysvvkkys Ipaewl

Condition: new, Functionality: fully functional, worktable width: 450 mm, worktable length: 950 mm, oscillation stroke: 15 mm, grinding belt length: 2,640 mm, grinding belt width: 150 mm, power: 2.2 kW (2.99 HP), grinding belt speed: 14 mm/s, frequency: 50 Hz, motor voltage: 400 V, Sanding unit can be pivoted using a hand crank. The welded steel machine stand guarantees high torsional rigidity and vibration-free operation. Oscillating sanding belt with separate gear motor for better sanding results. Oscillation can be optionally activated. Sanding base with graphite coating for a longer sanding belt service life. Height-adjustable sanding table utilizes the entire sanding belt width. Additional table with extraction openings for sanding radii on the rubberized guide roller. Sanding sleeve device with attachable work table. The spring-loaded belt tension automatically compensates for belt length differences. With adjustable stops, it is ideal for veneer sanding. Bob Eswg Ddasy Ipaswl Dimensions and Weights Length (product) approx. 1700 mm Width/Depth (product) approx. 1000 mm Height (product) approx. 1150 mm Net Weight approx. 300 kg Extraction Connection Number of Extraction Outlets 2 Extraction nozzle diameter 100mm Worktable(s) Worktable length 950mm Worktable width 450mm Worktable height adjustment 110mm Electrical Data Supply voltage 400V Mains frequency 50Hz Oscillation motor power 0.11kW Sanding unit: Sanding belt length 2640mm Sanding belt width 150mm Belt speed(s) 14m/s Oscillation stroke 15mm Sanding surface length 800mm Sanding surface width 150mm Sanding unit tilt 0-45° If you have any questions, please contact us! Are you looking for a specialist dealer near you? We supply specialist machine dealers throughout Germany, in European and non-European countries with metalworking machines, compressed air technology, woodworking machines, welding technology, as well as cleaning and workshop technology. Contact us and we will tell you the nearest dealer.

Condition: new, Hoku KS 150 edge sander manufactured by Rehnen. The upper section is made of heavy-duty cast iron with a built-in three-phase motor 380 V, 2.2 kW, 2850 rpm; the machine is equipped with a built-in switch-plug combination; Motor protection switch and main switch in accordance with VDE regulations; Sanding belt back panel dimensions: 850 x 150 mm; steel table height adjustable by spring pressure; belt dimensions: 150 x 2280 mm; The sanding belt back panel is covered with a graphite sliding coating; Bwsb Ey Iewgc D Sspael The machine is supplied with an assortment of sanding belts; A square and miter gauge is also included. The machine is dust-tested (GS) by Holz-BG-Stuttgart when connected to a central extraction system with an air speed of at least 20 m/s. - Swivels 90-180° - Motorized belt oscillation - Small support table on the idler pulley - Pneumatic belt tensioning Technical specifications: Motor power: 2.2 kW Sanding belt dimensions: 150 x 2280 mm Sanding belt speed: 22 m/s Table size: 750 x 350 mm Space required: 1000 x 800 mm Weight: from 180 kg Extraction diameter: 100 mm

Condition: new, Year of construction: 2024, New machine Year of construction 2024 Equipment and technical data: - Complete sanding unit can be tilted by motor up to 45 degrees without any table adjustment - Feed system integrated in the machine carrier, conveyor belt 50 mm wide at the bottom, pressure rollers 60 mm diameter at the top, motor 0.55 kW Speed infinitely variable 3-15 m/min. - Double-sided operation with face and contact sanding side - Sanding belt size 200 x 2000 mm - Belt drive motor 3 kW Bwob Eyjvbmkmj Ipajl - Oscillation stroke programmable 10-90 mm - CE-compliant/dust-tested Availability: short term Storage location: Hochheim

Condition: as good as new (ex-display), Year of construction: 2024, The robust Junior R1 offers all the features that a modern edge sanding machine must have. A solid cast iron sanding unit with a powerful powerful motor ensures maximum sanding performance. The working table, adjustable in height by spring pressure, allows optimum belt utilization and safe working. Belt oscillation, infinitely variable unit swiveling, and veneer Bwsb Eyed R Ev De Ipael unit, a veneer sanding device and an additional table for and an additional table for sanding work on the on the deflection roller. The machine is supplied with an assortment of sanding belts; an angle and miter fence is also included. Technical data: - Motor power: 2.2 kW - sanding belt size: 150 × 2280 mm - grinding belt speed: 22 m/sec. - table size: 750 × 350 mm - space requirement: 1000 × 800 mm - weight: from 180 kg - Suction Ø: 100 mm Location: Ex warehouse 54634 Bitburg - free loading - Can be shipped for a fee

Condition: used, Year of construction: 2022, Oscillating cylindrical grinder from hnische specifications. A possible screw variant for spindle sleeve clamping. It is used somewhat similarly to the ProLoc device. Storage location: Customer Beb Ey Ipovvkk Heaowl

Condition: new, Year of construction: 2022, Exhibition machine Year of construction: 12/2022 Equipment and technical data: DESCRIPTION Sanding unit can be swiveled by hand crank The machine stand made of welded steel guarantees high torsional rigidity and vibration-free operation Oscillating sanding belt with separate gear motor for better sanding results Oscillation can be switched on as required Sanding pad with graphite coating for a longer service life of the sanding belt Height-adjustable sanding table to utilize the entire sanding belt width Additional table for sanding radii with integrated extraction openings Sanding sleeve device with attachable work table The spring-loaded belt tension automatically compensates for belt length differences Ideal for veneer sanding with adjustable stops Veneer overhang can be sanded off effortlessly TECHNICAL DATA Dimensions and weights Length (product) approx. 1700mm Width/depth (product) approx. 1000mm Height (product) approx. 1150mm Weight (net) approx. 300kg Drive power Oscillation motor power 0.11kW Suction connection Suction nozzle diameter 2 x 100mm Work table(s) Worktable length 950mm Worktable width 450mm Work table height adjustment 110mm Electrical data Supply voltage 400V Mains frequency 50Hz Sanding unit Sanding belt length 2640mm Sanding belt width 150mm Belt speed(s) 14m/s Oscillation stroke 15mm Sanding surface length 800mm Sanding surface width 150mm Swivel sanding unit 0 45° SCOPE OF DELIVERY 1x sanding belt K100 5x rubber rollers Ø25, Ø30, Ø40, Ø45, Ø50 mm 6x sanding sleeves K80 - Ø25, Ø30, Ø35, Ø40, Ø45, Ø50 mm On-board tool Mitre fence Beb Eyek D Nxpo Ipaewl Location: Hochheim Availability: Immediately

Condition: new, Year of construction: 2025, Kündig edge sanding machine Uniq-S Edition 30 Top condition - available immediately - - Complete sanding unit can be tilted up to 45 degrees by motor without any table adjustment - Feed system integrated in the machine carrier, transport belt 50 mm wide at the bottom, pressure rollers 60 mm diameter at the top, motor 0.55 KW, speed infinitely variable 3 - 15 m/min - Can be operated from both sides with flat and contact sanding side - Sanding belt size 200 x 2000 mm - Belt drive motor 3 KW, 380 V, 50 Hz - Oscillation stroke programmable 10 - 90 mm - CE compliant/dust tested Standard version Kündig Uniq - S Accessories: - Q4 auxiliary table belt drive roller - Q6 semi-circular table belt drive roller - Z04 table extension Bsb Ey Iovk R Arepaswl Location: from stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2022, New machine Year of manufacture 2022 Scope of delivery: Table widening Rubber rollers with veneer edge grinding device with contact shoe with fine ice setting and stop rulers with grooved infeed ruler for veneer overhangs quick changeover from veneer edge sanding to solid wood sanding possible length (product) approx.: 1900 mm Bob Eyekwhk Sj Ipaowl width/depth (product) approx.: 900 mm Height (product) approx.: 1350 mm Weight (net) approx.: 290 kg Power oscillation motor: 0.25 kW Suction nozzle diameter: 140 / 100 mm Height adjustment longitudinal table: 230 mm cross table height min.: 720 mm working table length: 960 mm working table width: 350 mm Working table height adjustment: 230 mm 400: Supply voltage V Phase(s): 3 Ph type of current: AC Mains frequency: 50 Hz grinding belt length: 3000 mm grinding belt width: 200 mm belt rotation speed(s): 20 m/s oscillation stroke: 20 mm grinding surface length: 1050 mm grinding surface width: 200 mm incl. 1 VE abrasive belts K 80 1 VE abrasive belts K 120 Availability: short term Storage location: Hochheim

Condition: new, Year of construction: 2025, Heavy machine base guarantees high torsional rigidity and vibration-free operation Better sanding results due to sanding belt oscillation via separate gear motor Oscillation optionally switchable Bwsb Ejff Ed Tsy Ipaol Veneer edge sanding device with fine adjustment as standard Grooved infeed ruler for sanding veneer overhangs Quick changeover from veneer to solid wood sanding Height-adjustable sanding table for utilization of the entire sanding belt width Height adjustment of the sanding table and sanding unit swivelling via hand wheels Height-adjustable additional table with suction device for grinding radii Optimum chip removal through extraction at the unit and at the cross table Automatic compensation of strip length differences due to spring-loaded strip tension Dimensions and weights Length approx. 1900 mm width/depth approx. 810 mm Height approx. 1230 mm Weight approx. 290 kg Dust extraction connection Suction socket diameter 120 mm Drive power Oscillating motor 0,25 kW Work table(s) Working table length 960 mm Working table width 352 mm Working table height adjustment 210 mm Cross table height min. 730 mm Electrical data Input power 3 kW Supply voltage 400 V Phase(s) 3 Ph Current type AC Mains frequency 50 Hz Sanding unit Sanding belt length 3000 mm Sanding belt width 150 mm Belt speed(s) 20 m/s grinding surface length 1050 mm Grinding surface width 220 mm Swivel 0 - 45 ° Oscillation stroke 20 mm Availability: Short term

Condition: used, Year of construction: 1991, Used machine Used profile sanding machine of the company Arminius type ST 10 Bobokwhh Ts Ey Ipaowl Year of construction: 1991 MNo.: 0-290-02-1567 Engine power: 1.1 kW Spindle adjustment: 0° - 135° Table surface: 1000 x 800 mm without visible objects on the table surface Availability: short term Location: Röllbach

Condition: used, Year of construction: 2000, Used machine Equipment and technical data: DESCRIPTION Sanding unit can be swiveled by hand crank The machine stand made of welded steel guarantees high torsional rigidity and vibration-free operation Oscillating sanding belt with separate gear motor for better sanding results Oscillation can be switched on as required Sanding pad with graphite coating for a longer service life of the sanding belt Height-adjustable sanding table to utilize the entire sanding belt width Additional table for sanding radii with integrated extraction openings Bwob Ey Ipev E S Acjasl The spring-loaded belt tension automatically compensates for belt length differences Ideal for veneer sanding with adjustable stops Veneer overhang can be sanded off effortlessly TECHNICAL DATA Dimensions and weights Length (product) approx. 1700mm Width/depth (product) approx. 1000mm Height (product) approx. 1150mm Weight (net) approx. 300kg Drive power Power oscillation motor 0,11kW Work table(s) Worktable length 950mm Work table width 450mm Work table height adjustment 110mm Electrical data Supply voltage 400V Mains frequency 50Hz Sanding unit Sanding belt length 2640mm Sanding belt width 150mm Belt speed(s) 14m/s Oscillation stroke 15mm Sanding surface length 800mm Sanding surface width 150mm Swivel sanding unit 0 45° with chassis Availability: short term Storage location: Flörsheim