Condition: like new (used), Year of construction: 2017, operating hours: 108 h, functionality: fully functional, working width: 1,650 mm, power: 370 kW (503.06 HP), type of input current: three-phase, workpiece height (max.): 160 mm, input frequency: 50 Hz, input voltage: 400 V, workpiece width (max.): 1,650 mm, space requirement length: 7,660 mm, COSTA LEVIGATRICI 1650 CALIBRATOR/SANDING MACHINE This machine is in really new condition with only approximately 100 hours of operation. It is fully functional and operates without any issues. Technical Specifications * Machine Type: Automatic sanding / calibration line * Working Width: 1650 mm * Feed System: Motorized conveyor belt with variable speed control * Working thickness: 3 to 160 mm Lower Section: * 3 sanding steel roller units * 1 finishing pad unit * Cleaning system with blowers and brushes Upper Section: * 3 sanding steel roller units * 1 finishing pad unit * Cleaning system with blowers and brushes Unit Power: Nwsdsyt H Dnopfx Ab Eed * From 18.75 kW up to 75 kW (depending on the unit) Control System: * PLC control with touchscreen interface Safety: * Safety sensors * Emergency stop system

Condition: good (used), Year of construction: 1988, operating hours: 1,437 h, functionality: fully functional, machine/vehicle number: 32055, Wide belt sander - Veneer sanding - Solid wood - Intermediate lacquer sanding Nwjdpfjyv H Akex Ab Esd With 2 sanding belts: - 1st belt: cross sanding - 2nd belt: longitudinal sanding with segmented pressure beam The machine is very well maintained and in good, ready-to-operate condition.

Condition: ready for operation (used), functionality: fully functional, Belt sander for narrow elements Specification: • condition - used • 2 belt speeds • right/left rotation • table top dimensions 50 x 50 cm • 1.1 kW (380V) engine • double-sided culaga with a hoof for profiles • culaga adjustable at an angle and up/down • belt width - 40 mm Nwedpovur Ecofx Ab Eed • dimensions - 60 x 60 x 160 cm (length x width x height) Additional information: • good technical condition • the photos presented show the actual condition of the item for sale • possibility of switching on and checking the device on site

Condition: used, used 2-belt sander 1x with continuous pneumatic pressure feed 1x sanding unit 100 mm vacuum clamping device Manufacturer: Heesemann Type: BA2 Njdpfoyvvr Uox Ab Eewd Machine no. 7304051 Motor: 7.5 / 11 kW Sanding length approx. 2550 mm Sanding width approx. 100 / 150 mm Belt length approx. 8500 mm Table size approx. 2550 x 1350 mm Throat (right) approx. 600 mm Upper belt cover Table lighting Vacuum clamping device with pump 9 vacuum suction plates Belt speeds 710 / 1430 m/min Sanding shoe 2450 mm Extraction connection D 180 / 250 mm Required space approx. 4500 x 1400 x 1800 mm Weight approx. 1500 kg Total connected load approx. 12.5 kW Location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery as seen, as inspected, without warranty or guarantee

Condition: used, Year of construction: 2000, used, top equipment, excellent condition, low hours Manufacturer: Johannsen Model: T94 Year of manufacture: 2000 Machine no.: 22138 CE type tested GS wood dust tested Motor: 5.5 / 0.25 kW Sanding length: approx. 2600 x 960 mm Sanding width: approx. 960 mm Belt length: approx. 7800 x 150 mm Table size: approx. 2790 x 960 mm Nwodpfx Aoyvvr Iob Esd Throat depth right: approx. 850 mm Electric adjustment Upper belt cover Upper sanding support Table lighting Belt speeds: 1434 m/min Right-left travel Belt blow-off Sanding shoe: 300 x 140 mm Extraction connection: D 180 mm Required space: approx. 4000 x 1500 x 1500 mm Weight: approx. 1000 kg Total connected load: approx. 5.7 kW Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without warranty or guarantee

Condition: used, Year of construction: 2023, Used machine Year of manufacture: 2023 Condition: absolutely as new, machine is unused Equipment and technical specifications: - 2-belt machine; 1st belt: roller, 2nd belt: platen - Usable working width: 1100 mm - Sanding belt dimensions: 1120 x 2150 mm - Max. workpiece thickness: 160 mm - Steel calibration roller: 150 mm - Platen width: 50 mm - Belt motor power: 11 kW - Belt speed: 18/16 m/s - Feed motor power: 0.55 kW - Adjustable feed conveyor with steplessly variable speed: 4/20 m/min - Height adjustment motor: 0.24 kW - Mechanical belt oscillation "Eco Gear Patent System" - 1 drum brake for belt deceleration - Swiveling roller for belt tensioning - 3 pressure rollers, rubber-coated - Emergency stop bar at infeed - Electronic workpiece thickness display - 2 roller conveyors (each with 2 rollers) at infeed and outfeed - 1 extraction port, 160 mm Ø - Automatic table positioning - New patented belt oscillation system - No valves - No photoelectric sensors - Not sensitive to dust - Energy-efficient, eco-friendly system - Since 2008 this machine model with the mentioned system has been running continuously without lateral belt runoff!!! - Includes Unitek belt motor 14.7 kW instead of 11 kW (upgrade) - Includes Unitek pneumatic platen with control synchronized to feed speed Availability: short notice Stock location: Saxony-Anhalt Njdsw E Ty Ujpfx Ab Ejwd

Condition: used, Year of construction: 1997, functionality: limited functionality, - Oscillation defective - Main switch replaced Nedpfx Ajyi Ug Ajb Eswd - Machine is operational - Sold without warranty

Condition: excellent (used), Year of construction: 2007, operating hours: 592 h, Calibration and fine sanding automatic machine, wide belt sander with electronic segmented sanding pad and lacquer sanding capability A video of the machine in operation can be provided upon request. Ideal sanding machine for interior finishing companies, also suitable for intermediate lacquer sanding. Single belt machine with combination unit and electronic segmented pressure beam, edge segments can be switched on and off Segment width of the pressure beam: 35mm Contact roller pneumatically adjustable, low wear thanks to grooved steel roller Grit compensation Drive motor 7.5kW with automatic motor brake, infinitely variable belt speed controlled by frequency converter from 2 - 18 m/s Feed belt speed infinitely adjustable via frequency inverter from 2.5 - 13m/min Pneumatic, workpiece-controlled belt blow-off device Cleaning brush at the outfeed Constant working height at 900mm by adjustment of the machine's top section, making it integrable into sanding lines Feed belt is still very grippy and in excellent condition Maximum sanding width approx. 1090mm Workpiece height approx. 3 to 150mm Standard sanding belt size 1120 x 1900mm Nwedpfxjym Du Re Ab Ejd 3 rubber-coated pressure rollers Infeed roller table and foldable outfeed table Preparation for vacuum blower. The conveyor belt is perforated, and a plug for an optional blower is available. Alternatively, the conveyor can also be connected to an extraction system. Extraction connection: 1 x 180mm, 1 x 140mm, and 2 x 100mm Terminal control with 50 programmable sanding programs for automated machine operation. Parameters: belt speed, feed speed, workpiece height, pressure beam application points front and rear, edge segments, belt blow-off nozzle, optional vacuum blower, pneumatic adjustment of the calibration roller CE mark Operating manual (Delivered) without the connection cable shown Original paint, only repainted in a few areas Approx. 592 operating hours, about 40 minutes per week on average. Dimensions approx. 1800 (with table 2600) x 1800 x 2150mm (LxWxH). Weight approx. 2200kg. The machine can be inspected and demonstrated at our premises by appointment. We only offer machines that are ready for demonstration and available from our warehouse, see 'Other offers from this provider.'

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, grinding height: 100 mm, overall weight: 500 kg, grinding width: 300 mm, 3-sided profile sanding machine / brush sanding machine Manufacturer: Loewer Model: MultiMaster LZ 3 Compact 3-sided sanding machine for mouldings, facade boards, profiled timber, etc. The machine comes from a flooring and panel manufacturing facility. Nsdjyinw Uspfx Ab Eewd Year of manufacture: 2006 CE mark Working width: 300 mm Max. pass-through height: approx. 100 mm Fitted with 4 sanding brush units: - 2x from above - 1x from the left - 1x from the right Spindle diameter: approx. 30 mm Max. brush diameter: approx. 300 mm Brush speed infinitely variable Feed rate infinitely variable, max. approx. 16 m/min Voltage: 400 V, 50 Hz, 3-phase On-site circuit protection: 20 A Weight: approx. 500 kg

Condition: excellent (used), Year of construction: 2012, I sell the widebelt sanding machine SCM Sandya 16 S 110, year 2012. Configuration: 18,5 KW hard rubber cylinder 15 KW hard rubber cylinder 11 KW combi unit soft rubber cylinder + pneumatic jumping pad. Working width 1100mm Njdpfjihfawsx Ab Eewd Pressure rollers for short elements. Air-blow on all units. Total weight 2750kg 3 motors 18,5 + 15 + 11 kW Including full documentation. Condition LIKE NEW ! The machine was working only a few. Available immediately.

Condition: excellent (used), Year of construction: 2006, I sell the widebelt sanding machine SCM Sandya 7 S 110 Year 2006. Configuration: 11 KW steel cylinder 11 KW hard rubber cylinder soft rubber cylinder Working width 1100mm Pressure rollers for short elements. Air-blow on all units. Total weight 2400kg 2 motors 11 + 11 kW Including full documentation. Condition LIKE NEW ! The machine was working only a few. Nedpoxtxhkofx Ab Eowd Available immediately.

Condition: excellent (used), Year of construction: 2000, I sell the widebelt sanding machine Costa A CT 1150, year 2000. Configuration hard rubber cylinder - electronic segmented pad. Working width 1150mm Bands 1180x2620mm Pressure rollers for short elements. Air-blow on both units. Total weight 2300kg 2 motors 15 + 11 kW Additionally built brushing unit with bottom cleaning brush. Including full documentation. Condition LIKE NEW ! The machine was working only a few. Available immediately. Nwjdpfxjg Trubs Ab Esd

Condition: used, turning speeds 450 / 700 / 1.400 U/min transmission ratio 3 output 0,2 / 0,5 / 0,6 kW current 0,6 / 1,0 / 1,1 A table surface area 540 x 390 mm 0 380 V / 50 Hz chuck RÖHM / 165 mm Brush diameter 235 mm dimensions 0,80 x 0,44 x 1,13 mm Brushing Machine HAHN & KOLB - UVM Type 2 Nwedpfx Aboym D Abo Eed - incl. braking system

Condition: excellent (used), Wide Belt Sander SCM Casadei Libra 30 Model – Libra 30 Sanding width: 950 mm Max material height: 170 mm 2 sanding units (1 x steel roller, 1 x combination unit) Finishing pad 15 kW motor, star/delta starting Two feed speeds Electric table adjustment Table position display Oscillation with photocell control The sander is in very good condition, fully operational and ready for work Nodpfx Abeyv D A Is Ejwd Weight approx. 1100 kg

Condition: excellent (used), functionality: fully functional, grinding width: 1,350 mm, overall weight: 4,200 kg, Fine and smoothing sanding machine Heesemann, model: FGA 6 For intermediate lacquer sanding, wood surface smoothing, and sanding of foils The machine is fully functional, well maintained, and in very good technical condition. The conveyor belt has been replaced. Sanding width: 1300 mm Working height: 880 mm, constant Maximum workpiece thickness: 3–80 mm Transport bed: with individual transport belts Drive: 2.5 kW three-phase motor, including blow-off unit Feed speed: 4.5–22 m/min, adjustable Units Brush roller unit: centrally height-adjustable Diameter: 150 mm Drive power: 1.5 kW Bristle material: Fibre Longitudinal sanding unit Continuous electronic adjustment of the sanding belt speed via frequency inverter Wear-free brake unit Pneumatic belt tensioning Intermittent belt blow-off device Nodpfjya I Iusx Ab Ejwd Infrared belt control Counter-rotating sanding belt Sanding belt dimensions: 2620 x 1350 mm Belt sanding speed: 0.3–12 m/s Drive power: 11 kW Graphical operator terminal for inputting machine settings, including numeric thickness adjustment and displays for fault sources, workpiece throughput, and feed speed Electronically controlled pressure beam Control roller spacing: 40 mm Pneumatic belt tensioning The pressure beam's contact surfaces automatically adjust to the shape of the passing workpieces Workpiece vacuum hold-down system: Fan with 5.5 kW drive power Operator side and terminal: left Operating voltage: 400 V, 50 Hz Space requirements: 2550 x 2220 x 2300 mm Weight approx.: 4200 kg (Technical specifications are subject to change and errors, as well as prior sale.)

Condition: excellent (used), functionality: fully functional, grinding width: 1,350 mm, overall weight: 5,500 kg, working height: 880 mm, Wide belt sanding machine with cross and longitudinal unit for sanding, among other things, veneer before lacquering. The machine is fully functional, well-maintained, and in very good technical condition. The conveyor belt has been renewed. Nodoya I Rijpfx Ab Ejwd Sanding width: 1300 mm Working height: 880 mm constant Workpiece thickness max.: 3–140 mm Transport bed: with individual conveyor belts Drive: 3.0 kW three-phase motor, including extraction device Feed speed: 4.5–22 m/min, adjustable Units: cross/longitudinal/brush Brush roller unit: centrally height-adjustable Diameter: 150 mm Drive power: 1.5 kW Brush material: fibre 1. Cross sanding unit - Wear-free brake system - Pneumatic belt tensioning - Belt run monitoring - Pressure lamella belt system, intermittent belt cleaning device - Sanding belt dimensions: 4900 x 150 mm - Belt sanding speed: 12 + 24 m/s - Drive power: 13 / 17 kW 2. Longitudinal sanding unit - Infinitely variable electronic control of sanding belt speed via frequency inverter - Wear-free brake system - Pneumatic belt tensioning - Intermittent belt cleaning device - Belt control: infrared - Sanding belt in counter-rotation - Sanding belt dimensions: 2620 x 1350 mm - Belt sanding speed: 0.3 – 12 m/s - Drive power: 11 kW Graphical operating terminal for entering machine settings, including numerical thickness adjustment as well as fault source, workpiece passage, and feed speed display Electronically controlled pressure beam Roller spacing: 40 mm Pneumatic belt tensioning The contact surfaces of the pressure beam automatically adapt to the shape of the workpieces passing through Weight approx. 5500 kg Space requirement approx. 2550 x 2675 x 2400 mm

Condition: excellent (used), CATALOG NUMBER 7857 Technical data: - Maximum workpiece width: 1100 mm - Maximum workpiece height: 160 mm 2 sanding units: – From above: - Rubber pressure roller, smooth 1) Calibrating grooved rubber roller - Rubber pressure roller Nwjdpfjx Ifgrjx Ab Ejd 2) Grooved rubber roller + pad + metal roller - Rubber pressure roller - Total unit power: 15 kW – From below: - 3 driven rubber feed rollers - Feed belt - 3 driven rubber feed rollers - Sanding thickness potentiometer - Pneumatic belt oscillation - Table elevation: electric + manual (for precise adjustment) - 2 feed speeds - With pneumatic brake - Working pressure: 6-8 bar - Extraction port diameter: 2 x 140 mm - Overall dimensions (L/W/H): 1650 x 1960 x 2100 mm - Weight: 1250 kg ADVANTAGES – Not repainted – Czech production – 2 sanding units – Original operator’s manual (DTR) – Used sander, in very good condition Net price: 36,900 PLN Net price: 8,790 EUR Net price calculated at exchange rate: 4.2 PLN/EUR (Price may change if the exchange rate fluctuates significantly)

Condition: excellent (used), CATALOG NUMBER 7818 Technical data: - Max. working width: 1100mm - Max. working height: 180mm 2 units: 1) Grooved rubber roller for calibration 2) Grooved rubber roller for calibration – Top side: - Metal pressure roller - Unit Njdpfxsx Dbh Ie Ab Eswd - Metal pressure roller - Unit - Metal pressure roller – Bottom side: - 2 rubber sliding rollers - Feed belt - 2 rubber sliding rollers - Pneumatic belt oscillation - Electric table lifting - Sanding thickness potentiometer - 2 feed speeds - Feed motor: 0.80 kW - Main motor: 10kW - Operating pressure: 6–8 bar - Extraction port diameter: 2x155mm - Overall dimensions (LxWxH): 1670x1740x2040mm - Weight: 1200kg ADVANTAGES – Made in Italy – Sanding thickness potentiometer – 2 sanding units – Used sander, very good condition Net price: 25,900 PLN Net price: 6,160 EUR based on an exchange rate of 4.2 PLN/EUR (Prices may change with significant fluctuations)

Condition: excellent (used), Catalogue number: 7549 TECHNICAL DATA Max width of workpiece: 1100mm Max height of workpiece: 170mm 2 units: 1) Grooved rubber roller for calibration 2) Rubber roller + pad + metal roller – from above: Metal roller, sliding Working unit Metal roller, sliding Unit with pad Output metal roller, sliding – from below: Feed belt Pneumatic belt oscillation Electric table lifting 2 feed speeds Motor: 11kW With pneumatic brake Working pressure: 6-8 bar Extractor outlet diameter: 2x150mm Overall dimensions (L/W/H): 1960x1700x2000mm Weight approx.: 2000kg Nedpfx Absyaq Rfo Eowd – German manufacture – 2 units – not repainted – Used sander, very good condition Net price: 34,900 PLN Net price: 8,300 EUR at 4.2 EUR rate (Prices may change with significant fluctuations)

Condition: excellent (used), Year of construction: 1996, I sell the widebelt sanding machine OTT MEGA TR11, year 1996. Configuration: Hard rubber calibrationcylinder Combi unit rubber cylinder + pneumatic jumping pad with segment control. Working width 1100mm Nodpjywrzbofx Ab Ejwd Elektronic working height adjustment with digital readout 3-160mm 1 Motor 11kW 2 Feeding speeds. Sensitive adjustment of pad position. Pneumatic adjustment of pad and cylinders pressure position. Condition LIKE NEW ! The machine was working only a few. Available immediately.

Condition: like new (used), DEMONSTRATION MACHINE For sale is an as-new JET double drum sander DDS-237, equipped with a powerful 400V motor with 7.5 HP and a maximum sanding width of 940 mm. This demonstration unit is in excellent condition. Technical Specifications - Motor: 400 V / 7.5 HP - Drum speed: 1,400 rpm - Feed speed: 3 m/min - Maximum sanding width: 940 mm - Sanding thickness: 0.8 to 133 mm Nedpfx Aeycc R Neb Ejwd - Minimum workpiece length: 230 mm - Sanding drum dimensions: 152 x 940 mm each - Sanding belt width: 75 mm or 100 mm - Dust extraction port: 2 x diameter 100 mm - Dimensions (LxWxH): 1,090 x 1,420 x 1,090 mm - Weight: 440 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale. Shipping via haulage company: Austria: €180.00 incl. VAT Germany: €210.00 incl. VAT South Tyrol: €240.00 incl. VAT Related terms: JET DDS-237, double drum sander, wide belt sanding technology, wood finishing, 7.5 HP drive, 400V industrial, 940 mm working width, feed system, workshop machine, professional sanding equipment Reference: R-A0117

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: 351.09.006.18, Subscrisa, DDG INSOLVENCY I.P.U.R.L., cu sediul în Cluj-Napoca, str. Septimiu Albini, nr. 115, jud. Cluj, CIF RO27987796, nr. matricol: 2A0522, prin practician în insolvență Godorogea Daniel-Lucian în calitate de lichidator judiciar al societății ELEMENTO MOBILI S.R.L. - în faliment, in bankruptcy, en faillite, cu sediul social în mun. Dej, str. Dumbrava Roșie, nr. 6, et. parter, ap. 1, jud. Cluj, înregistrată la Registrul Comerțului de pe lângă Tribunalul Cluj, sub nr. J12/2389/2016, cod unic de înregistrare 36225390 desemnat în această calitate prin Încheierea Civilă nr. 1278 din data de 03.07.2025 pronunțată de Tribunalul Specializat Cluj în dosar nr. 442/1285/2025, organizează licitație publică cu strigare, cu preț în urcare, pentru vânzarea individuală a bunurilor identificate în prezentul anunț Prima licitație va avea loc la data de 08.04.2026 la ora 15:00, la sediul DDG Insolvency I.P.U.R.L. din Cluj-Napoca, str. Septimiu Albini, nr. 115, jud. Cluj. În caz de neadjudecare licitația se repetă în data de 15.04.2026, 22.04.2026, 29.04.2026, 06.05.2026, 13.05.2026, în aceleași condiții și la aceeași oră. În vederea vizionării bunurilor, lichidatorul judiciar va stabili o zi de vizionare în data de 06.04.2026 între orele 09:00-12:00. Cei interesați de vizionare sunt invitați să contacteze lichidatorul judiciar la nr. de telefon 0763 478 619 și să își exprime intenția de participare, anterior datei stabilite. Pe parcursul organizării ședințelor de licitație publică, lichidatorul judiciar va mai organiza zile de vizionare, care vor fi aduse la cunoștință persoanelor interesate. În caz de adjudecare, lichidatorul judiciar va emite factura fiscală pentru contravaloarea bunurilor adjudecate. Conversia prețului în lei se va realiza la data emiterii facturii fiscale, utilizând cursul de schimb stabilit de BNR pentru acea dată. Pasul de licitație este de 5% din prețul de pornire. Caietul de sarcini în vederea participării la licitație va fi întocmit de către lichidatorul judiciar în concordanță cu uzanțele în materie, va conține regulamentul de participare la licitație și se va valorifica de către practicianul în insolvență, la prețul de la prețul de 500 lei+TVA pentru bunurile de până la 5.000 euro și de 1.000 lei+TVA. pentru bunurile de peste 5.000 euro. Acesta poate fi achiziționat de la sediul lichidatorului judiciar, sau telefonic urmând a fi transmis participantului prin e-mail. Garanția de participare la licitație va fi în cuantum de 10% din prețul de pornire. Aceasta împreună cu documentația de înscriere la licitație vor trebui depuse cu cel puțin 24 de ore anterior datei licitației la sediul lichidatorului judiciar. Garanția de participare la licitație va fi dedusă din prețul bunurilor pentru care participantul a fost declarat adjudecatar și va fi restituită persoanelor care nu au fost declarate adjudecatari. La preț egal, va fi declarat adjudecatar persoana care se va angaja să achite întregul preț în termenul cel mai scurt. Nwedoyfg E Nepfx Ab Ejd Termenul de plată al prețului va fi de 5 zile lucrătoare de la momentul adjudecării. În cazul în care nu se va achita și restul de preț, adjudecatarul va pierde avansul achitat cu titlu de garanție și nu va mai putea participa la următoarele licitații care se vor organiza.

Condition: like new (used), Year of construction: 2019, DISPLAY MACHINE For sale is an as-new Wesetslintner long belt sander with a belt length of 6800 mm. The display machine is in its original condition, so you receive the full warranty. Technical data: Nedpfx Aeyqzmrjb Eewd - Table size: 2500 x 900 mm - Belt length: 6800 mm - Belt width: 150 mm - Electrically adjustable table height - Lighting - Motor power: 2.9 kW / 4 HP - Year of manufacture: 2019 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: long belt, sander, surface processing Reference: R-A0117

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 101780, total length: 4,300 mm, total width: 720 mm, total height: 1,390 mm, type of input current: three-phase, input voltage: 400 V, feed rate X-axis: 6 m/min, power: 8.4 kW (11.42 HP), We offer this used Rehnen KBA edge sanding machine, year of construction 2008. Manufacturer: Rehnen Model: KBA Year of Construction: 2008 Condition: used Category ID: 826 Type ID: 94 Type: edge sanding machine Aggregates total: 5 Moulding aggregates: 2 Sanding aggregates: 3 Workpiece width min mm: 60 Workpiece thickness max mm: 90 Feedrate max m/min: 6 Aggregates oscillating: Yes Sanding belt: Yes Profile sanding pad: Yes Milling aggregate vertically scanning: Yes Stepless rotational speed control: Yes Clamping system: Upper pressure rolls Jump-in control: pneumatic CE marking: Yes Total connection kW 6,50 Required space LxWxH mm 4300x720x1390 Nwsdpfx Abeyvfwro Ejd Availability short-term, ex location customer! If you have any questions or need more information, feel free to send us a message or give us a call.

Year of construction: 2025, condition: new, Dimensions (L/W/H) 940x640x136 mm Weight 96 kg Total power requirement 1,5 kw Nwedpfx Absv A Hzbo Eod