Wide-belt sander

DMC LSL 130

Condition: used, Year of construction: 2004, machine/vehicle number: SA/005006, SECOND HAND WIDE BELT SANDER WITH 3 BELTS DMC MOD. UNISAND USK 1350 M3 - Steel roller - Rubber roller Nsdpfswrnmpsx Aphjlg - Rubber roller - N. 3 indipendent motors - Working width 1350 mm - Device for short pieces - Touch screen control - S/N SA/005006 - Year 2004 - CE rules

Condition: excellent (used), Opportunity in excellent condition from Switzerland liquidation: Irion longitudinal circular saw, 6200 mm, 15 HP, retractable saw blade, electric height adjustment, stepless hydraulic feed via foot pedal. Nlsdpfx Asyw N Rysphog

Condition: used, Year of construction: 1996, operating hours: 12,171 h, total width: 2,300 mm, total height: 2,400 mm, total length: 9,000 mm, Colour: Grey Empty weight: 10.000 kg BOERE sanding line 'Compact' Elite Nedpewnh Eqofx Aphelg Year of construction 1996 (CE) 12171 Operating hours Maximum height 150 mm Maximum width 1300 mm Elite BKKS 1300 First generator 45kW engine Second generator 30kW engine Third generator 18.5kW engine Voltage 380V, 183Amp Elite TKKS 1100 First generator 45kW engine Second generator 30kW engine Third generator 18.5kW engine Voltage 380V, 172Amp Revised by Boere in 2019 - Year: 1996 - Documentation available: Yes - CE marking present: Yes - Bottom sander: - CE certificate present: No - Serial number: 98015305 - Operating hours: 12171 - Max. working width [mm]: 1300 - Max. working height [mm]: 150 - Sanding belt length [mm]: 1900 - Sanding belt width [mm]: 1310 - Motor power first unit [kW]: 45 - Motor power second unit [kW]: 30 - Motor power third unit [kW]: 18.5 - Feed motor [kW]: 2.2 - Number of contact rollers [pcs.]: 2 - Number of combi units [pcs.]: 1 - Number of steel rollers [pcs.]: 2 - Number of motors [pcs.]: 3 - Belt blow-off system present: Yes - Brush present: Yes - Sanding pad present: Yes - Segments present: Yes - Top sander: - Max. working width [mm]: 1300 - Max. working height [mm]: 150 - Sanding belt length [mm]: 1900 - Sanding belt width [mm]: 1310 - Motor power first unit [kW]: 45 - Motor power second unit [kW]: 30 - Motor power third unit [kW]: 18.5 - Feed motor [kW]: 2.2 - Number of contact rollers [pcs.]: 2 - Number of combi units [pcs.]: 1 - Number of steel rollers [pcs.]: 2 - Number of motors [pcs.]: 3 - Belt blow-off system present: Yes - Structuring brush present: No - Brush present: Yes - Sanding pad present: Yes - Segments present: Yes - Voltage [V]: 380 - Current consumption [A]: 172 - Transport dimensions: 9000mm x 2300mm x 2400mm (l x w x h) - Transport weight [kg]: 10000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2002, machine/vehicle number: 4606221, SECOND-HAND WIDE BELT SANDER VIET CHALLENGE MOD. 211/B RR - CE RULES Nlsdpfx Ajwrn N Djphjg - Working widht mm. 1100 - 1st rubber roller diam. 180 mm. - 2nd rubber roller diam. 250 mm. - Vacuum - Belt dimensions mm. 2620x1130 - Motor Kw 18 - S/N 4606221 - Year 2002

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: A50729/RC1, working width: 1,350 mm, Equipment: documentation/manual, SECOND-HAND WIDE BELT SANDER COSTA MOD. AK-CCCT 1350 - CE RULES - Working width 1350 mm Nlsdpfszcl Taex Apheg - S/N A50729/RC1 - Year 2005

Condition: good (used), 2550 x 880 mm (6 pieces) 2550 x 1090 mm (3 pieces) Nsdpfjxcufkex Aphelg 1300 x 100 mm driven + 2 pieces without drive (2 pieces) 1300 x 200 mm driven + 1 piece without drive (1 piece) Roller diameter: 60 mm

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Working height: 900 mm Working width: 1,350 mm Belt changing side: left Workpiece thickness: 3 - 160 mm Frequency-controlled feed speed: 4 - 20 m/min Abrasive belt dimensions: 2,620 x 1,350–1,380 mm Adjustable sanding belt blowing device with 5 settings WRD WORKPIECE CLEANING ROTOR Workpiece cleaning system with 16 rotating nozzles MOBILE OPERATING TERMINAL powerControl with powerTouch SST SOFT STARTER Inrush currents are limited to prevent voltage drops GWRD BELT CLEANING PROGRAM Upon activation, the machine automatically sets to a 10 mm workpiece thickness and activates the blowing rotors. After the feed belt is fully cleaned, the machine returns to its initial setting. AAT EXTRACTION DAMPER CONTROL Control of extraction dampers via the terminal (24 Volt DC, without extraction dampers included) UPS EMERGENCY POWER SUPPLY FOR BELT CONTROL 1-3 PCS Uninterruptible power supply for sanding belt oscillation in case of power failure System consists of: SANDTEQ W-700, PROFI SWB735/RRE – sanding from below Wide belt sanding machine with three sanding units for processing wood or wood-like workpiece surfaces Prepared to accept up to two auxiliary units, such as a cleaning brush, satinizing or structuring brush, and rotating cleaning nozzles. Units: I. R UNIT Sanding unit with automatically adjusting contact roller Profiled steel roller, 240 mm diameter Nodpfx Apeyw Ndmeholg With grain compensation Drive motor: 37 kW Abrasive belt speed: 25 m/s - Automatic locking of the sanding unit for fast belt changes and increased process safety - Abrasive belt drives with electronic, wear-free brake - Optical, touchless abrasive belt tracking - Pneumatic abrasive belt tensioning with integrated belt edge compensation II. R UNIT Sanding unit with automatically adjusting contact roller Rubber-coated roller, 240 mm diameter Rubber hardness: 85° Shore With grain compensation Drive motor: 30 kW Abrasive belt speed: 18 m/s III. E UNIT Sanding unit for installing a pressure beam - Automatic locking of the sanding unit for fast belt changes and increased process safety - Abrasive belt drives with electronic, wear-free brake - Optical, touchless abrasive belt tracking - Pneumatic abrasive belt tensioning with integrated belt edge compensation - Protected storage area on the machine for additional sanding inserts Drive motor: 22 kW Abrasive belt speed: 2 – 18 m/s Torque-dependent standby operation to reduce energy consumption. ACP PNEUMATICALLY SUPPORTED PRESSURE BEAM - Adjustable sanding pressure via pressure regulator - Workpiece-controlled engagement and disengagement at the leading and trailing edges - Various sanding inserts, 80 mm wide, with different felt hardnesses Machine dimensions (L x W x H): 3,900 x 2,100 x 2,000 mm Machine weight: approx. 7,500 kg SANDTEQ B-700, PROFI SWT735/RRE – sanding from above Wide belt sander with three sanding units for machining wood or wood-based workpiece surfaces Units as above, additionally: FBM FINISHING BRUSH Brush unit with finishing brush Bristles: horsehair Diameter: 130 mm Drive motor: 0.75 kW Machine dimensions (L x W x H): 2,995 x 2,100 x 2,255 – 2,415 mm Machine weight: approx. 6,500 kg

Condition: used, Year of construction: 2000, SECOND-HAND TOP AND BOTTOM SANDING LINE OMA mod. STADYO - CE RULES - Volt. 400/50 - S/N 0400 - Year 2000 Nledpjv Rpkhofx Aphjg