Used Ciata T300/14/P for sale (47,083)

Year of construction: 2020, condition: new, functionality: fully functional, Equipment: documentation/manual, Package 14 PP6713 – CS6713 Brinox LEP 11 – GMP Chromatography System with CIP Skid New – unused – in original packaging Manufacturer: Brinox Model: LEP 11 Version: PP6713 with CIP System CS6713 Condition: New – in original packaging – never installed Description Offered is a pharmaceutical chromatography system LEP 11, consisting of the chromatography panel PP6713 and the corresponding CIP skid CS6713. The system is completely new, unused, and remains in the manufacturer’s original condition. The unit was designed for GMP-grade protein purification as part of C1-INH chromatography. System Features Cleanroom panel for wall integration Transfer lines to sieve-bottom tanks Precipitation vessel connection Gel waste disposal line Complete utility/process piping Technical Specifications Design pressure: –0.9 to +6 bar Design temperature: +2 to +95 °C Electropolished surfaces Ra ≤ 0.8 µm Material: 1.4435 stainless steel Fully drainable GMP-compliant design CIP System CS6713 Stainless steel frame construction Centrifugal pump Rcedpfsyl Rnnsx Abajh Shell-and-tube heat exchanger Conductivity, pressure, and temperature monitoring Adjustable CIP supply flow The system is brand new and has never been in operation.

Year of construction: 2014, condition: used, functionality: limited functionality, machine/vehicle number: 02/2014, The flat pouch packaging machine is suitable for packaging bulk products, granular and powdered materials, spices, and cream powders into paper-based or composite film packaging. It requires a continuous supply of the material to be filled and an intermittent supply of packaging material. All packaging operations are performed in automatic mode. The equipment has been taken out of production, had no issues, but has not been used for three years, so it may require refurbishment. Rcsdez Ryfwopfx Abajh Stored in a covered, enclosed warehouse.

Condition: excellent (used), Year of construction: 2012, Air capacity : 6000 m3/h Engine size : 7,5 Kw Inlet tube diameter : 300 mm Noise : 71 db Filter area : 30 m2 ( 90 filter bags ) 3 x 165 L waste buckets Fire extinguishing system Transport dimentions : L 3000 x W 1100 x H 2300 mm Rcodpfx Abj Agnrysash Weight : 950 Kg

Condition: used, Year of construction: 1969, Used Machine Year of manufacture: 1969 Features and technical specifications: Rjdpfx Abo Ad Rn Ijajch - Working width: max. 170 mm; planing head: 125 x 170 x 35 mm - Working height: max. 130 mm; planing head: 125 x 130 x 35 mm - 1st shaft: bottom, 3 kW - 2nd shaft: right, 3 kW - 3rd shaft: left, 4 kW - 4th shaft: right, 4 kW - 5th shaft: top, 4 kW - Feed rate: infinitely variable from 5 to 40 m/min

Condition: good (used), Year of construction: 2000, functionality: fully functional, overall weight: 1,400 kg, 2 Fanuc spray robots with spray guns, used for painting and lacquering MDF board edges, are being sold as a set. Rjdpjzb Dgpsfx Abajch

Condition: used, Year of construction: 2000, Offered is a stainless steel filter press. Filter area: 4.8m². Material: Stainless steel (VA). Separate control cabinet. Equipped with sight glass, discharge cone and technical documentation. Separately offered spare parts package with: 16 filter plates made of stainless steel 1.4571, Ø 510mm, 27 scrapers/scraper blades, 1 EPDM diaphragm and 1 sample diaphragm, 1 scraper guide rail, 4 plate anchor rods, 16 plate anchor rails, 2 assembly fixtures, 2 mounting rings for bellows and additional spare and assembly parts. Weight: approx. 4500kg including control system. Overall dimensions X/Y/Z: approx. 4500mm/1400mm/3300mm. Inspection possible by arrangement. Rcods Agwqpepfx Abajh

Condition: excellent (used), Year of construction: 2006, We sell the Mambranpress for kitchen doors, doors, or door frames, etc. Producer ORMA Macchine, Model: PM Air System 25/14 Year 2006. Area 2500 x 1400mm. / 1 Table PIN system for edge binding. Possible to see at work. Documentation included Rodpfxezmnyij Abaoch

Condition: used, Year of construction: 2004, saw blade diameter 360 / 425 / 460 mm cutting diameter 10 - 140 mm cutting speed 25 - 160 m/min total power requirement 35 kW weight of the machine ca. 4,2 t Rjdpfx Abev Nq Rtsajch dimensions of the machine ca. 2,8 x 1,8 x 2,2 m

Year of construction: 2024, condition: used, CoolTemper PowerJet TCF-GTH-96.144-PJ4 Convection Flat Glass Tempering Furnace Serial no: H358 (2024) Maximum temperature: 750 degree / Operating temperature 700 degree, Min Glass Size 120 x 320mm, Max Glass Size (4-5mm) 1650 x 2400mm, (6mm) 2150 x 3650mm, (8-19mm) 2440 x 3650mm with Roller Loading/Unloading Tables, Cooltemper GlassScan heat map scanner, Overhead Platform/Fan Room, Cooltemper SMART IMMI Control Rcsdpfx Ae Afwrbsbash Location: This lot is located in Wellingborough, Northamptonshire, UK

Condition: good (used), Year of construction: 1964, Profile bending machine. Produced by Girggio - ITALY - 1964. Type. PA-14. 8kW main engine. Roller screw drive motor 5.5 kW. Rcjdelbilrepfx Abash Dimensions L x W x H 2200 x 1300 x 1400 Weight approx. 3000kg.

Condition: excellent (used), 1 x stainless steel 14 head multihead Screw weigher complete with twin incline feed conveyor and exit conveyor. IP65 rated. Dimple pans for sticky and awkward products. Model TY-P14 Rsdpfx Ajz Ak I Uebaech

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, Weiler Praktikant 140 B, lead and draw spindle lathe with toolmaker precision, manufactured in 1988, with a new 3-axis digital display from K&C!!!!! Technical data: >> Year of manufacture 1987, machine no. 87-140-751 >> Center height 140 mm >> Distance between centers 650 mm >> Spindle speeds: from 24 to 2500 rpm >> Spindle bore 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 Rcedpfs Afx R Hjx Abajh >> Feeds from 0.02 to 0.63 mm/rev >> Possible threads: metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 680 kg >> Spindle brake can be activated >> Length 1.6 m, height 1.25 m, depth 0.7 m Accessories and equipment: >> New 3-axis digital display from K&C, 12 months manufacturer's warranty with operating manual Functions: Switching mm/inch, coordinate selection ABS/INC, halving the display value, reference mark, tool programming 200 items, taper calculation, radius/diameter, quick zeros, switching the counting direction. >> Quick-change tool holder, collets from 2 to 28 mm in 1 mm increments >> 3-jaw chuck 160 mm Weiler with 2 sets of jaws >> Mulifix size A with 2 steel holders >> Coolant system >> Machine feet >> Bed stop >> Splash guard >> Operating manual, parts list About the machine: Offered is a Weiler Praktikant 140 B lead and draw spindle lathe in good condition. This very nice lathe is fully functional, of course. The machine comes from a research center. All slides run smoothly and evenly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and allows surfaces to be produced that appear to be ground. Take advantage of the opportunity to inspect this machine on-site while it is powered up and to convince yourself of its condition.

Condition: used, functionality: fully functional, Year of construction: 2002, operating hours: 26,415 h, load capacity: 2,000 kg, lifting height: 5,795 mm, free lift: 2,100 mm, fuel type: electric, mast type: triplex, construction height: 2,480 mm, fork carriage width: 830 mm, fork length: 1,200 mm, drive type: Elektro, Reach truck Load center: 500 ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Transmission: Dual pedal Condition: Ready for use and fully functional Technical condition: good Battery voltage: 48V Battery Ah: 420Ah Battery manufacturer: AIM Battery type: PzS Battery year of manufacture: 2025 Rcodpe Agc Rbefx Abaoh Battery condition: 80 - 100% Description: Handover in as-is condition / Ready to drive without a valid safety inspection. If you have any further questions, please do not hesitate to call us. In addition to this model, we have approximately 150 other material handling vehicles in stock. Visit our website for leasing and financing options, and we will be happy to provide you with a quote for delivery at favorable conditions. A trade-in of Linde equipment is also possible – even without purchasing a device from us. The stated operating hours were recorded at the time of listing. Subject to prior sale, changes and errors. Side shifter, 3rd valve, safety light.

Condition: ready for operation (used), Year of construction: 1992, An FTH Fördertechnik bag palletizing system is available. Formation: 5-bag, palletizing capacity: approx. 1500 bags/h, pallet dimensions X/Y 1: 1200mm/800mm, pallet dimensions X/Y 2: 1200mm/1000mm, stacking pattern: variable, overall system dimensions X/Y: approx. 12600mm/5700mm. An on-site inspection is possible. Rsdoxd Avaepfx Abasch

Condition: used, Year of construction: 2000, machine/vehicle number: 27, Ingramatic SMP 14 coupling machine with feeder, good condition, top-notch electrical system. Diameter 5-14 mm, length 130 mm, 220 pieces, spindle up to 8,000 rpm. ISO 30 tool holder. Rcedpfx Abewktmfeaeh

Year of construction: 1998, condition: ready for operation (used), A glass bottle washing machine PAC Swiss is available. Washing capacity: 7500bottles/h, cycle time: 6.72s, throughput time: approx. 12min, bottle types: Euro/NRW/Ale, bottles per row: 14, max. bottles in the machine: 1456, bottle volume: 330ml/500ml, process: preheating/caustic treatment/recooling/spraying, machine dimensions X/Y/Z: approx. 7050mm/1800mm/2300mm, operating hours: approx. 14175h. Documentation available. On-site inspection is possible. Rcsdpfxjyhgnij Abaoh

Condition: used, Year of construction: 1969, Used machine Year of manufacture: 1969 Runs perfectly Max. working width: 170 mm Max. working height: 130 mm 1st shaft: bottom 2nd shaft: right 3rd shaft: left 4th shaft: right 5th shaft: top Availability: short-term Rcedpfx Abjxavtqeajh Storage location: Röllbach

Condition: excellent (used), Year of construction: 2010, Laminated wood press LHP 14 Rcsdjzx Sbbepfx Abaoh Year of manufacture: 2010 Working length: 7600 mm Working width: 240 mm Working height: 800 mm

Condition: excellent (used), Year of construction: 2014, Handtmann VF 628 Vacuum Filler Linked to a PVLS 143 linker cutter Year 2014, One owner from new Rodpfxo Agvkco Abasch Serviced yearly by Handtmann Mainly used for Christmas production only In excellent cndition

Condition: excellent (used), 3-phase DC spot welding machine, A/DH version Brand DALEX Type PMS 14-5 G3 Thrust: 550 mm Rated power at 50 & duty cycle: 150 kVA Rodpev Uwyrsfx Abaoch Secondary short-circuit current: 65 kA Secondary open-circuit voltage: 3.35 - 6.7 V Electrode force: 80-1,200 daN Weight: 1,620 kg with double-stroke cylinder 4-position switch Main switch Mounted control cabinet according to VDE 0110 with 100-program MPS 8043/1 welding controller

Condition: used, Year of construction: 2011, Three knife trimmer Kolbus HD 143.P Year: 2011 For three side trimming of book blocks and brochures, used as an individual machine or as a unit within book production lines. Counter: 12.560.000 books Description: - Co-Pilot with touchscreen - Right hand infeed Rcodjz Eaq Ispfx Abaoh - Counter stacker - Cut counter - Exchangeable cutting tables (standard set): (4-18) - Knife pre-setting device - Set of knife holders: 2 - Sets of knives: 2 Max. mechanical speed: 7.500 single products/hour or 4,200 single products/hour from 40 mm product thickness on Maximum size (cutted): 305 x 420 x 80 mm Minimum size (cutted): 100 x 100 x 2 mm Maximum size (uncutted): 320 x 450 x 80 mm Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: used, ABB ACS880-01-025A-3 Frequency Converters / Variable Frequency Drives – 14 Units Available We offer a lot of 14 used ABB ACS880 industrial frequency converters, all of the same type. Technical details: - Manufacturer: ABB - Series: ACS880 - Type: ACS880-01-025A-3+E200+K454+K473 Rcedpfsz Ercijx Abajh - Input: 3-phase 400 VAC - Input current: 25 A - Frequency: 50/60 Hz - Output: 3-phase 0…U1 - Output current: 25 A - Output frequency: 0…500 Hz - Nominal apparent power: 17 kVA - Frame size: R2 - Cooling: Air-cooled - Protection class: IP21 - Manufactured in Finland Quantity available: 14 units - 12 units complete with ABB control panel/display - 2 units without control panel/display The drives are used industrial surplus equipment and have been removed from an industrial installation. Available individually or as a complete lot. For larger quantities or the complete lot, please contact us for a package price. Condition: Used / surplus stock Location: Rotterdam (Botlek), The Netherlands Worldwide shipping can be arranged. Sold as-is. No warranty or guarantee unless otherwise agreed. Please refer to the pictures for the actual condition and configuration.

Condition: used, Year of construction: 2015, Three knife trimmer Kolbus HD 143.P Year: 2015 For three side trimming of book blocks and brochures, used as an individual machine or as a unit within book production lines. Cycles: 12,9 mio Description: - Co-Pilot with touchscreen - Right hand infeed - Counter stacker - Cut counter - Exchangeable cutting tables (standard set): (4-18) - Knife pre-setting device - Set of knife holders: 2 - Sets of knives: 2 Max. mechanical speed: up to 4.200 cuts/h Maximum size (uncutted): 450 x 320 x 80 mm Maximum size (cutted): 420 x 305 x 80 mm Minimum size (cutted): 100 x 100 x 2 mm Maximum pile height: 80 mm Rodpfx Aezx S Risbaech Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: used, Year of construction: 2001, Laminating machine – Sheet-to-sheet laminator STOCK – 14R678-1650/P ref 3016 Year: 2001 Max. sheet size: 1650 x 1650 mm Automatic liner feeder Automatic bottom feeder for open flute, E, B, EB Side lay Press band Rodpfx Abszhmnhjaech Flip-flop function Stacker PRICE – must be sold quickly!

Condition: excellent (used), Year of construction: 2005, saw blade diameter 360 / 400 / 425 mm cutting diameter 10 - 140 mm cutting speed 8 - 150 m/min required cooling water max. 40 l/min height of material-table 950 mm max. travel between columns 680 mm control Siemens Simatic total power requirement 28 kW Rodpfx Ajvzt Eqebaoch weight of the machine ca. 4,2 t dimensions of the machine ca. 2,8 x 1,8 x 2,2 m