Used Euromac for sale (27)

Condition: used, 2-station notching machine and folding machine EUROMAC type Multi 220/6R Press brake, press brake, notching machine Serial no. M11941298 Year of manufacture 1998 Cutting capacity 6 mm steel at 45 kg/mm2 4 mm for stainless steel Station I (notching) Notching angle 60° to 140° (with special blade from 30° to 140°) Knife length 220 mm Table size 950 x 640 - Manual angle adjustment via hand wheels - Notching angle with built-in blade set from 60° to 140 - Hydraulic clamping of the upper and lower knives - Automatic cutting gap adjustment - sheet hold-down device - Scaled measuring tapes embedded in the table - stop rails with angle adjustment - Operation via foot switch Station II (die bending device) Pressure force 18 ton Table size 950 x 340 Working height 1100 mm - stepless lifting speed - Infinitely adjustable stroke limiter - Stroke adjustment up to 30 mm working stroke - Reversible prism with 4x 90° prisms, length = 415 mm - 90° upper tool, length = 415 mm Motor power 4 kW Nljdpfx Aomck Ryegmjd Mains connection 400 Volt, 50 Hz Space requirement L x W x H 1150 x 1050 x 1460 mm Weight approx. 1000 kg good condition

Condition: ready for operation (used), Year of construction: 2013, punching force: 31 t, sheet thickness (max.): 3 mm, travel distance X-axis: 1,250 mm, travel distance Z-axis: 1,300 mm, number of axes: 2, CNC punching machine manufactured in 2013. This Euromac MTX FLEX 12 hybrid features a maximum punching force of 30 tons and an X-axis stroke of 1250 mm. The Y-axis stroke is 1300 mm for multi-tool setups and 1250 mm for single-tool configurations. If you are looking to get high-quality punching capabilities, consider the Euromac MTX FLEX 12 hybrid machine we have for sale. Contact us for further details. Nledpezil H Ssfx Agmod • Y-axis stroke: 1300 mm (multi-tool) / 1250 mm (single-tool)

Condition: ready for operation (used), Year of construction: 2019, operating hours: 9,356 h, punching force: 31 t, sheet thickness (max.): 6 mm, travel distance X-axis: 2,254 mm, travel distance Y-axis: 1,263 mm, CNC punching machine manufactured in 2019. This Euromac MBX 6 Plus 1250/30-2250 features a total of 24,439,006 hits and a total working time of 11,309 hours. It includes a CNC control system with a dedicated console and a brush table to prevent sheet scratching. If you are looking to get high-quality punching capabilities, consider the Euromac MBX 6 Plus 1250/30-2250 machine we have for sale. Contact us for further details. - Total Hits: 24,439,006- Total Working Time: 11,309 hours- Actual Punching Time: 4,708 hours- Control System: CNC with dedicated console and Logitech keyboard interface- Multitool Setup: Station 2, Code 1 (6MT01)- Oil Temperature: 22 °C- Power Supply: 50 Hz- Bed Type: Brush table to prevent sheet scratching Nlsdpfxsy Sar Ds Agmod

Condition: used, Euromac PB 350S Horizontal bending machines Euromac horizontal bending machine. with related equipment. Nodpfx Aszh Rf Degmeld

Condition: like new (used), Year of construction: 2015, functionality: fully functional, mandrel diameter: 76 mm, product width (max.): 1,600 mm, Eruomac rewinder / slitter TB 6.10M Year of construction 2015 Unwinding Roll width 1600 mm Roll diameter 400 - 1200 mm Equipped with web edge control Njdpfxetyxu Es Agmeld Rewind Roll width 1600 mm Roll diameter 350 - 1000 mm

Condition: ready for operation (used), Year of construction: 2004, punching force: 31 t, sheet thickness (max.): 7 mm, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,000 mm, number of axes: 3, This 3-axis Euromac ZX INDEX was manufactured in 2004. It features a maximum punching force of 300 kN and a working area of 1250 mm in the X-axis and 1000 mm in the Y-axis. The machine is capable of processing steel up to 7 mm thick. If you are looking to get high-quality punching capabilities, consider the Euromac ZX INDEX cnc punching machine we have for sale. Contact us for further details. Nsdpszcnn Hofx Agmeld

Condition: excellent (used), functionality: fully functional, 6mm, length 220mm, adjusteble angle. With punch and radius notcher. Nljdpjzhmdcjfx Agmsd

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, punching force: 30 t, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,250 mm, overall weight: 6,950 kg, EUROMAC PUNCHING MACHINE MOD. 1250/30 – 2000 AUTOINDEX YEAR 2009 – CE – FULLY REFURBISHED, AS NEW. Maximum punching force: 300 kN Y-axis travel with multitool: 1300 mm Y-axis travel with single punch: 1250 mm X-axis travel: 1250 x 2000 mm Automatic repositioning: Up to 10,000 mm Punch stroke adjustment: from 0.1 to 31 mm Autoindex multitool stations: 5 Rotational speed: Programmable Y + X 1250 speed: 50 m/min Y + X 2000 speed: 60 m/min Positioning accuracy: +/- 0.1 mm Clamp opening: 11 mm Maximum strokes: 300 (1/min) Nlsdpfx Ajy Dgrnogmsd Maximum sheet thickness: 10 mm Maximum punching diameter: 81 mm Installed power during operation: 7.5 kW Year: 2009 CE marked machine Overall dimensions: 2000 x 4000 x h 3350 mm Weight: 6950 kg

Condition: defective spare-parts repository (used), Year of construction: 1995, Euromac hydraulic stamping machine Inventory no. 3723 * Manufacturer: Euromac * Type: XP 950/30 CNC * Capacity: 30 tons * Table size: mm * Stroke rate: 180 strokes/min Nledpfxjzd Hv Ro Agmod * Table size approx. 4000 x 1300 mm * Cabinet with accessories * Electrical fault

Year of construction: 1990, condition: ready for operation (used), A hydraulic Euromac notching machine is available. Notching capacity steel/stainless steel: 6mm/5mm, blade length: 220mm, working angle: 90°, angle adjustment: 30°-140°, stroke rate: approx. 50/min. Machine dimensions X/Y/Z: approx. 1100mm/950mm/1300mm, weight: approx. 800kg. An on-site inspection is possible. Nljdpfszd Ei Aex Agmjd

Condition: used, Year of construction: 2001, gebraucht 2001 9647 prompt, Zwischenverkauf v Italien 24400 € 1 30 to 1250+N x 1000 mm 1250 mm 1000 mm 40 m/Min 30 m/Min 50 m/Min 30 mm 730 1/Min 300 1/Min 980 mm 4 kW 115 l 4000 mm 2780 mm 1900 mm 4000 x 2300 x 1900 mm + Z mm 4800 kg With 6-way multitool holder MTE6 (max. Dm. 24 mm) 2 Clamping claws Table with Brushes, table dimension 1970 x 2260 mm Foot pedal 2 pcs. additional single matrix holders PC with Euromac Software Eurowin 8.36 Max. Punching force 300 kN Automatic repositioning up to 10.000 mm Max. Punching diameter for single tool 88,9 mm, Max. Punching diameter Multitool Holder MTE6 Dm. 24 mm Max. Opening the clamping claws 7 mm Transport width: 2350 mm User Manual in english and italian CE declaration available WITH LARGE TOOL PACKAGE several pieces of each of the following dimensions: Round: Dm. 2,5/2,8/3/3,12/3,2/3,5/3,9/4,1/4/4,5/5/5,2/5,5/6/7/7,5/8/8,5/9/9 ,5/10/10,5/11/11,5/12/12,5/13/13,5/14/15/16/18/19/20/21/23 Square: 10/12/13/15 mm Rectangle: 5x2/20x2/22x4 mm Oblong hole: 10x6,5/12x8,5/12,2x10,7/18x5 mm BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Nledpfx Aowirkgogmed Details:

Condition: used, Year of construction: 2011, EUROMAC MTX FLEX6 Nlsdeynkqzopfx Agmjd

Condition: used, Year of construction: 1998, functionality: unexamined, punching force: 30 t, total height: 1,800 mm, total width: 2,800 mm, total length: 4,000 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, Hydraulic punching press Euromac type CX 1000/30. Manufacturer: EUROMAC (Italy) - 1998. Specifications: - Single-station hydraulic punching machine - Press force: 30 t - Max. workable sheet in Y-X axis: 1000 mm x 10,000 mm (with repositioning) - Steel sheet thickness: 6 mm - Max. punch diameter, station D: 80 mm - 200 strokes per minute Number of sheet holders: 2 Dimensions (LxWxH): 4000x2800x1800 mm, Weight: 5230 kg, Drive: 7.5 kW Nlodpfxsyi Ukne Agmsd

Condition: good (used), Gebruikte inkepingmachine van Euromac Nedpeywg S Ijfx Agmjld Type: 250 4 s Capaciteit: 250 x 250 x 4 mm

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, Euromac hydraulic punching machine Type CX750/30/2000 Capacity 30 t Njdpfx Ajyxmhlogmeld Y-axis reach: 1000 mm X-axis reach: 2000 mm X-axis reach with repositioning up to 10,000 mm CNC control: Euromac Eurowin 6-station multitool + with 6-station die holder

Condition: good (used), functionality: fully functional, Year of construction: 1998, Used notching machine from Euromac Model: 220 6 S Capacity: 220 x 220 x 6 mm Nedpfxoyu H T Ej Agmjld

Condition: as good as new (ex-display), Year of construction: 2025, Used horizontal bending machine Digibend 400 CNC with back gauge L=1250 and 22" LCD touchscreen monitor, USB ports as well as integrated UPS DigiSoft software – demonstration machine – The machine is powered and can be inspected by appointment! Technical data: Year of manufacture: 2025 Max. press force: 400 kN / 40 t Max. stroke: 245 mm Max. working speed: 9.6 mm/sec Min. working speed: 4.8 mm/sec Return speed: 62 mm/sec Njdpfxeyw Rxfe Agmeld Average speed: 35.8 mm/sec Storable programs / sequential bends: 50+5 (punching) Number of single bends / sequential bends: 16 Worktable dimensions: 580 x 1230 x 925 (H) mm Tool fixing holes in worktable: 4 x Ø 80 mm Working height: 925 mm Oil tank capacity: 40 l Motor power: 5.5 HP / 4 kW Connections: 380 V / 50 Hz Bending height: 200 mm Extra-high bending height: 400 mm Shearing max. capacity 40 kg/mm (mild steel): H=150 x 10 (thickness) Punching max. capacity 40 kg/mm (mild steel): Ø 30 x 10 (thickness) Straightening: 200 mm Two-jaw bending: Ø 60 mm Rotary bending: Ø 50 mm Automatic CNC back gauge: 1250/2000 mm Weight (approx.): 700 kg Dimensions: 580 x 1230 x 1150 mm

Condition: good (used), Year of construction: 1998, Neat used punching machine from Euromac Type CX 1000 30 Capacity 30 ton Unloading 1000mm Nljdoxld R Iepfx Agmed Overwrap up to 10000mm Including drawer cabinet with lots of tooling and multitool

Condition: good (used), plate thickness 6.5 mm thickness at "Niro-steel" 5.0 mm angle adjustable from - to 30 - 140 Grad no. of strokes ca. 50 Hub/min table: 950 x 1030 mm blade length 220 x 220 mm total power requirement 4.0 kW weight 800 kg range L-W-H 1100 x 950 x 1280 mm current new price approx. 20.000 euros good condition (!!) special price on request Equipment: - electro-hydraulic notching machine Njdpfx Agoyk Dhfomold - multi-function machine with 2x work stations * 1x notching, 1x unit for radius rounding * including radius punching tools - manual angle adjustment 30 - 140 degrees * 2x handwheels for angle adjustment - large / stable work table - 2x new angle stop, adjustable - automatic cutting gap adjustment - 1x freely movable foot switch - connection cable + 16A plug - cutting performance: * 6.5 mm to 60° ST * 5.0 mm to 60° VA * 4.0 mm to 30° ST * 3.0 mm to 30° VA

Condition: ready for operation (used), Year of construction: 2016, pressure 20.0 t chamfer lenght 850 mm distance between columns 850 mm back stop - adjustable 375 + 400 mm stroke of upper beam 196 mm dayligth 470 mm ajustment speed 200 mm/sec table height ca. 900 mm total power requirement 5.0 kW weight of the machine ca. 2500 kg New price ~ 85.000 euros well-kept / very good condition (!!) with electromechanical direct drive (servo motor + ball screws) Machine is operated without hydraulic oil - in checked condition - machine video - ?v=foxzKIA7vX8 Description : High performance, fast travel speeds and the best ergonomics this bending machine to a perfect tool in terms of productivity and Accuracy. This allows an unrivaled high productivity in the field of small and middle bending parts can be achieved, since even complicated bending sequences several stations can be processed very quickly. A large number of different and universally divided tools are possible an almost unlimited variety of areas of application. Nedpfx Agjxacifomsld Furnishing : - Stable machine frame for standing and seated operation - Deformation-optimized press beam - Highly dynamic, electromechanical. Direct drive (servo motor + ball screws) - CNC control Panasonic Toughbook incl. USB and WIFI connection - CNC controlled axes : Y + X + R + Z1 + Z2 - CNC control unit in front right, swivelling - Inductive length measuring system with temperature compensation - Ergonomic machine design - AMADA system upper tool holder - AMADA system lower tool holder - 1x brand new universal tool set (complete) - front safety device (DUAL Laser/Iris Rapid Bend) - Rear security cover - Laterally pivoting protective doors - 2x foot switch, for standing and sitting operation - Support tables comfort (front) - User manual (original) * Special accessories included: - 4-axis backgauge (axes X+R+Z1+Z2) * Speed X axis .. 250 mm/sec * Speed R axis .. 600 mm/sec * Z axis speed .. 1100 mm/sec * Positioning accuracy X axis .. 0.04 mm * Positioning accuracy R axis .. 0.06 mm * Travel X axis .. 375 + 400 mm * Travel R axis .. 180.0 mm

Condition: used, Year of construction: 1993, plate thickness 6.5 mm thickness at "Niro-steel" 5.0 mm angle adjustable from - to 30 - 140 Grad no. of strokes ca. 50 Hub/min table: 950 x 1030 mm blade length 220 x 220 mm total power requirement 4.0 kW weight 800 kg range L-W-H 1100 x 950 x 1280 mm current new price approx. 25.000 euros good condition (!!) special price on request Equipment: - electro-hydraulic notching machine - multi-function machine with 2x work stations * 1x notching, 1x unit for radius rounding * including radius punching tools - manual angle adjustment 30 - 140 degrees * 2x handwheels for angle adjustment - large / stable work table - 2x new angle stop, adjustable - automatic cutting gap adjustment - 1x freely movable foot switch - connection cable + 16A plug - cutting performance: * 6.5 mm to 60° ST * 5.0 mm to 60° VA * 4.0 mm to 30° ST * 3.0 mm to 30° VA Nodpfsxab Srjx Agmsld

Condition: ready for operation (used), functionality: fully functional, Euromac Digibend 360 Capacity: 36 tons Stroke: 250 mm Nlsdpsy Ducnefx Agmed Tooling optional, available upon request If you have any questions, please feel free to contact us.

Condition: used, sheet width 750 mm plate length 1250 mm plate thickness 4 mm table surface area 1600 x 1050 mm no. of strokes 180 Hub/min max. punching diameter 105 mm punching pressure 25 t total power requirement 4,0 kW Nlodpfjxfb Hmox Agmjd weight of the machine ca. 1,8 t dimensions 1,9 x 1,9 x 1,7 m Punching and nibbling machine - Digital readout for X and Y axis - Tool cabinet with tools

Condition: used, Year of construction: 2018, GENERAL TECHNICAL DATA: Performance • Maximum speed: up to 400 m/min • Speed dependent on material properties and slitting conditions Web & Dimensions Working width: 40 – 400 mm Maximum web width: 400 – 450 mm Roll Specifications Maximum unwind roll diameter: 520 mm Maximum rewind roll diameter: 520 mm Maximum roll weight: 100 kg Core diameters: • Unwinding: 76 mm (3”), adapter 120 mm • Rewinding: 76 mm (3”), adapter 120 mm Materials • Paper • Aluminium Nlsdoyx Dc Tspfx Agmod • Laminates • Flexible films • Material thickness: - Films: 30 – 100 µm Electrical Data Main supply: 3 × 400 V, 50 Hz Auxiliary voltage: 220 V AC / 24 V DC Installed power: approx. 8 kW Pneumatic Requirements • Air pressure: 6 bar Machine Features • Center winding system with contact rollers • Shaft winding system (expandable mandrels) • Reversible winding direction • Edge guiding system (FIFE with SE46C sensor) • Glue table with 2 independent clamping bars Cooling System • Electrical cabinet cooling: Water cooling (HÄWA) Noise Level • Sound level: < 75–80 dB Safety • Floor scanner • Side protection fence

Condition: used, Year of construction: 1999, plate thickness 3-4 mm pressure 0 t Cutting length 220 mm table height 900 mm quantity of oil 35 l Table dimensions 950 x 790 mm total power requirement 4 kW weight of the machine ca. 0,95 t dimensions of the machine ca. 1,0 x 0,86 x 1,2 m Foot switch angle adjustment 30°-140° Nlsdpsynbczofx Agmed automatic cutting gap adjustment