Condition: used, Weight 10 kg Felqxorl Ucwek Inspg Year ca. 2009 Table dimensions mm Motor output kW Spindle diameter mm reus U/min

Condition: good (used), Functionality: fully functional, SPINDLE MOULDER with tilting spindle model SCM T160 L’Invincibile Felqxk Ievzghrjnopg second hand machine spindle tilting by electric -5 ° / + 45 ° spindle lifting by electric motor power Hp 5,5 shaft diameter mm. 50 volt. 380/50 weight kg. 1000

Condition: used, Year of construction: 2003, Functionality: fully functional, Work table dimensions 1,200 x 730 mm Spindle tilt -10 + 45 Max. clamping height on spindle 140 mm Max. tool diameter tool diameter 250 mm Fpjlqxovurhdok Injg Max. diameter for tool lowering under table 300 x 130 mm Spindle speed 3300/4400/5600/7500/10000 rpm. Extraction nozzle on fence and rear stand, diam. 120 mm Pneumatic working pressure, min. 6 bar Main engine 7.5 HP, 5.5 kW For further information about technical data. Contact us

Condition: used, Year of construction: 2001, SECOND-HAND PROFILE SHAPER AND SANDER BALESTRINI CP8/HSC - CE RULES - Positions 1-2 milling units - Positions 3-4 milling units - Positions 5-6 sanding units Felqxomxglhjk Injpg - Positions 7-8 sanding units - Positions 9-10 trasversal sanding units - Working length mm. 2500 - Working height mm. 180 - N. 10 pneumatic locking cylinders - S/N 0 133 H2 - CE rules (year 2001)

Condition: good (used), Year of construction: 1986, Dimensions 6800x2700x1800 mm Workspace 1600x250 mm 8 motors, tool shaft diameter: 35 mm, maximum tool width 135 mm Spindles powers: 2x 11 kW (roughing) 2x 7,5 kW (rough profiling) 2x 3,5 kW (fine profile) Fpslqxksivtcgj Insg 2x 3,5 kW (grinding/fine profile)

Condition: ready for operation (used), Technical characteristics SPANEX variable speed trainer Largeur table700 mm Longueur table1100 mm Diamètre arbre50 mm Nombre de vitesses4 Power and Motors Fpolqxk Iotvc Anoneg Motor: 5.5 CV Overall dimensions

Year of construction: 1970, Condition: used, fabric-no. 920064 voltage 380 V table turning speeds 0-1,2 U/min Fslqxjrxg T Ajk Injpg weight of the machine ca. 1 t

Condition: used, chain width: 17 mm engine: 2,2 kW Rotatable: + - 45 ° Table swivel: + - 45 ° Further data: See PDF Lock case milling machine, door lock milling machine or chain milling machine / chain mortiser Framar type MC 60 for simultaneous milling of lock cases and drilling of door holes on doors and windows as well as many other possible uses. Fpelqxk Iotunbujnjg Chain width: 17 mm Motor: 2.2 kW

Condition: used, Year of construction: 1995, SECOND-HAND END-CUT OFF BORING AND MILLING MACHINE BACCI MOD. TTF1 - CE RULES Fpjlqxkomxfhms Inog - Volt. 380/50 - S/N 333 - Year 1995

Condition: ready for operation (used), Technical characteristics En cours de vérification Control panel Digital adjustment of spindle height and speed Shaft height and motorized fence HSK F80 tilting spindle Tilting +30°/45 Speed 1500, 4500, 6000 and 9000 rpm Shaft diameter: 50 mm Shaft length: 160 mm Maximum tool diameter: 220 mm Quick tool change (hydraulic) Infeed/outfeed adjustable steel guide Top-of-the-range machine Ideal for joinery, windows and cabinetmaking Power and Motors Voltage: 400 V Pluging: Three-phased Power: 6 Kw Motor: 7,5 CV Overall dimensions Lenght: 1340 mm Width: 1430 mm Height: 1320 mm Weight: 1300 Kg Fpjlqst Splwsxk Inog

Year of construction: 2009, Condition: used, 275 mm Fpelqxjrxg T Hjk Injg miter saw band length mm ohne Rollenbahn

Condition: used, Technical specifications: on demand Technical data: on demand engine: 1.5/2.2 kW number of revolutions: 11,350 – 17,400 rpm Throat: 1.000 mm Passage height: about 260 mm Frequency-controlled copy router Frommia type FS 100 with large projection for fast production of large individual pieces, small series or mass production made of wood or plastic. Workpieces can be guided and copied using negatives and copy pins, or processed with stops. Fpelqxetqmapsk Injg

Condition: ready for operation (used), Technical characteristics Digital adjustment of shaft height and speed Spindle height and motorized fence HSK F80 tilting spindle Tilting -10° / +45 5.5kW motor Speed 3000, 4500, 6000, 7000 and 10000 rpm Shaft diameter: 50 mm Shaft length: 180 mm Maximum tool diameter : 320 mm Quick tool change (hydraulic) Table dimensions : 1200 x 730 mm Top-of-the-range machine Ideal for joinery, windows and cabinetmaking Power and Motors Voltage: 400 V Pluging: Three-phased Power: 5,5 Kw Motor: 7,5 CV Overall dimensions Lenght: 1400 mm Width: 1150 mm Height: 1100 mm Weight: 900 Kg Fpslqxkstvcz Ae Inog

Condition: used, serial number 0493373 ampere 420 A water cooling unit kW Fpslqxjrxg T Rok Inog total power requirement kW

Condition: used, drilling: 30 mm Outer diameter: 140 mm width: 50 mm v-ledge: 18 x 4 mm Labelling: BG test feed: MAN n max: 9000 overall length: 390 mm Folqxksmt S Iie Injpg

Condition: ready for operation (used), Technical characteristics Shaft length : 250 mm Max tool diameter : 200 mm Fpsletvczujqxk Injg Shaft diameter : 50 mm Manual shaft raising/lowering Table length : 1100 mm Table width : 720 mm Motor power : 5,5 kW (7,5 HP) 4 rotation speed : 3000, 5000, 6000 and 8000 RPM Tenoning carriage sliding on the width Carriage dimensions : 750 x 300 mm Extendable stop adjustment 2 x 120 mm diameter suction ports on protector Ideal for small production Power and Motors Voltage: 380 V Pluging: Three-phased Power: 6 Kw Overall dimensions Lenght: 1100 mm Width: 720 mm

Year of construction: 1988, Condition: used, weight max. in kg 6000 kg fork length 1900 mm 89% Felqjrxxbtsxk Inspg serial number GEF 2240 height of stroke 3300 mm weight of the machine ca. 9650 t

Condition: ready for operation (used), Technical characteristics Power and Motors Voltage: 380 V Pluging: Three-phased Overall dimensions Lenght: 900 mm Width: 700 mm Folqjtvczqjxk Inepg

Condition: used, drum diameter mm width max. mm revolutions per minute U/min 4 Feeding speed St./min. Fslqxk Ioq Ad Hvsnepg Shank diameter mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m

Condition: ready for operation (used), Technical characteristics Fpolqjtvczxjxk Ineg Power and Motors Voltage: 380 V Pluging: Three-phased Overall dimensions

Condition: ready for operation (used), Technical characteristics Ø shaft 50 mm Aluminium guide Table 1200 mm Manual raising/lowering Second hand drive Power and Motors Motor: 5.5 CV Fslqxkjtvc Acs Inepg Overall dimensions

Condition: ready for operation (used), Technical characteristics Table width: 1200 mm Table depth : 800 mm Shaft diameter : 50 mm 4 rotation speeds : 3000, 4500, 6000 and 9000 RPM Pivoting micrometric guide Spindle clearance under table Foot brake Foot-operated spindle lock One-piece cast-iron frame Power and Motors Voltage: 380 V Pluging: Three-phased Motor: 5.5 CV Overall dimensions Fpolqxkstvc Aks Insg

Condition: ready for operation (used), Technical characteristics Shaft diameter : 50 mm Shaft length : 170 mm Table length : 1200 mm Adjustment guide Maximum tool diameter : 300 mm 4 rotation speeds : 3000, 5000, 6000 and 10000 RPM Manual raising/lowering 3 rollers feeder Power and Motors Fjlqet Sbp Uoxk Inspg Voltage: 380 V Pluging: Three-phased Overall dimensions

Condition: ready for operation (used), Technical characteristics Square table, width 180 mm Manual spindle raising/lowering Heavy-duty, high-quality machine Adjustable lip fence Variable 3-roller drive supplied with support Power and Motors Fpslqxk Istzth Ujnsg Voltage: 380 V Pluging: Three-phased Overall dimensions

Condition: ready for operation (used), Technical characteristics Control panel Digital adjustment of spindle, fence and speed Shaft height and motorized fence Folqet Sbqfoxk Inopg Speed 1500 to 9000 RPM (variable speed drive) Shaft diameter : 50 mm Shaft length : 170 mm Quick tool change (hydraulic) Infeed-outfeed adjustable steel fence Front extension Quick table opening Motorized drive support 4-roller drive (4 speeds) Top-of-the-range machine Ideal for joinery, windows and cabinetmaking Power and Motors Voltage: 400 V Pluging: Three-phased Power: 7,5 Kw Overall dimensions