Used Milling machines - univ.conv. 500-699mm X-axis travel for sale (68)

Condition: used, Year of construction: 1975, Technical details: x-travel: 300 mm y-travel: 175 mm z-travel: 350 mm quill stroke vertical: 60 mm revolution per minute: vert.+ horiz.: 40 - 2000 / 18 step U/min feeds:: 12,5 - 500 / 18 step mm/min. tool taper: SK 40 distance spindle nose and table: min./max.: 50 /400 mm distance spindle center to column: min./ax.: 170 / 345 mm table surface area: 670 x 285 mm total power requirement: 1,5 kW weight of the machine ca.: 0,8 t dimension machine xH: 1,4 x 1,05 x 1,6 m Cjhovc Avuex Dui Tegt Spindle vertical tool holder SK 40 Quill stroke 60 mm Speed 40 - 2000 rpm with 18 transmission steps Spindle horizontal Tool holder SK 40 Speed 40 - 2000 rpm with 18 transmission steps Equipment: 3-way display Heidenhain Coolant system *

Condition: good (used), Year of construction: 2000, Manufacturer: DELTECO Cohxsg Dg Ero Dui Tsgt Model: BEMATO Type: UNIVERSAL Year : 2000 Readout: FAGOR Traverses (X, Y, Z) : 600 x 350 x390 mm Table surface: 1200 x 300 mm Cono / Cone : ISO 40 DIN 2080 Main motor power : 2 cv Machine weigh: 1.725 kg

Condition: excellent (used), Year of construction: 1997, Europa Centurion CU5 Ram Type Milling Machine (Like Huron) Excellent condition - we welcome any inspections! Year 1997 Specification - Table size 1635 x 460mm No of T Slots 5 Width of T slots 18mm Distance between slots 80mm Longitudinal travel 1300mm Vertical travel (knee) 440mm Cross Travel (ram) 650mm Min Spindle nose to table surface 40mm Spindle Taper 50INT No of spindle speeds 27 Spindle speed range 30-2050rpm Longitudinal powerfeed 10 - 1000mm/min Cross powerfeeds 10- 1000mm/min Cgjhx Duisvm Abro Tjt Vertical powerfeeds 5 - 500mm/min Longitudinal rapid feed 2800mm/min Cross rapid feed 2800mm/min Vertical rapid feed 1400mm/min Spindle motor 7.5kW Max Table load 1800kgs Dimensions - L 2010mm x W 2621mm x H1950mm

Condition: new, Bernardo universal milling machine UWF 80 E incl. 3-axis digital display & y feed Technical specifications Table size 1000 x 240 mm ISO 40 spindle adaptor Spindle speeds vertical (8) 115-1750 U/min Spindle speed horizontally (9) 60-1350 RPM Quill stroke 125 mm Cehod Erttex Dui Tjgt Travel longitudinal (x) 590 mm Stroke transverse (y) 180 mm Travel vertical (z) 320 mm Distance from spindle / table 0-375 mm Throat depth 230-685 mm Swivel table 45 ° to + 45 ° Headstock Swivel range 90 ° to + 90 ° Feed range longitudinal (8) 32-700 mm / min T - slot size 16 mm Power vertical 0.85 / 1,5 kW Motor power horizontal 1.5 kW Machine dimensions (W x D x H) 1500 x 1430 x 2100 mm Weight 980 kg Scope of delivery • 3-axis digital display ES-12 H with LCD display • Tightening spindle M 16 • LED machine luminaires • Coolant system • Automatic platen feed for X-axis • Automatic platen feed for Y-axis • Adapter ISO 40/MK 3 • Adapter ISO 40/MK 2 • Adapter ISO 40/B 18 • Long milling ISO40/27 mm • Adjustable guard • Protective cover for horizontal milling • Horizon algal gene storage

Condition: good (used), Working travels 500x350x380mm Table size 790x360mm Spindle taper ISO40 Spindle speeds 63-4000 rpm Active digital read-out Misc accessories Cehxsff R Slj Dui Togt MARCELS MASCHINEN CH

Condition: excellent (used), Year of construction: 2012, HEIDENHAIN ND523, 3-axis DRO system Table size 800 x 400 mm Max. Table load 350 kgs "T” slots on table 7 pcs. x 50 mm x 14 mm X travel 600 mm Y travel 400 mm Z travel 400 mm Tool holder type ISO40 Spindle speed 50 – 4000 rpm Motor power 3 kW Power required 20 kVA Weight 2600 kgs Dimensions LxWxH = 2200 x 1800 x 2200 mm Accessories, features - Vertival milling head with hydraulic tool clamping - Front cover on machine table - Coolant unit - Central lubrication - Manual Cgohx Duieuamczo Tjt - Rapid speed on each axis Very good condition. Under power in our showroom in Hungary.

Condition: used, Year of construction: 1978, Technical details: x-travel: 1200 mm y-travel: 500 mm z-travel: 650 mm w-axis: 90° rechts/links table-size: 1600x500 mm revolution per minute: 24 - 1600 / 12 step U/min tool taper: SK 50 distance spindle nose and table: min/max: 150/800 mm distance spindle center to column: min/max: 200/800 mm table surface area: 1200 x 520 mm total power requirement: ca. 25 kW weight of the machine ca.: 5600 kg Cehxju Nc Rvs Dui Togt dimension machine xH: 2,4 x 3,0 x 2,4 m dimensions electric cabinet LxWxH: 1,1 x 0,5 x 1,8 m Further technical specifications: - horizontal spindle: rpm 25 - 1200 with 12 level, taper SK50 - controlled via control panel - incl. coolant device - equipped with measuring system manufacturer Millvision *

Condition: good (used), Year of construction: 2002, 1 used tool milling machine Manufacturer Intos Type FNGJ 20 Year of manufacture 2002 with digital display Heidenhain Cehxevrch Ne Dui Tegt Technical data Travel path x 450 mm Travel path y 300 mm Travel path z 350 mm Table dimensions 600 x 300 mm Swivel head Quill extension 50 mm Spindle mount ISO 40 Central lubrication Speed 50 -2500 rpm Weight approx. 1,300 kg

Condition: good (used), For sale are various Deckel FP3 milling machines, which are all in good condition. The special feature of this machine is the clamped table, which would be swiveling, rotating or even movable. A purchase of the machine with a "normal" milling table is also possible. The machine has been cleaned and tested by us. If desired, safety devices can also be mounted for an additional charge. L x W x H: approx. 2000 x 1600 x 1900 mm Weight: approx. 1500 kg TECHNICAL DATA Digital display: 3 - axes - digital display travels: X - axis: approx. 500 mm Y - axis: approx. 300 mm Z - axis: approx. 380 mm spindle: Speed range: approx. 40 - 2000 rpm Tool holder: ISO 40 Drive power: approx. 3.8 kW Tool clamping: manual Cgehx Dsiz T Exeui Tst feeds & rapid traverses: in all 3 axes Feed range: approx. 10 - 500 mm/min Rapid feeds: approx. 1.5 m/min Prices plus VAT Viewing possible by appointment. Contact us, our team is happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us, please visit our website

Year of construction: 1971, Condition: ready for operation (used), machine/vehicle number: 003711428, table mounting size: 254 x 1100 mm table movement x: automat. u. v. Hand 682 mm table movement y: von Hand 380 mm table movement z: von Hand 457 mm milling head swivelling by: +/- 90 bzw. +/- 45 ° spindle taper: ISO 40 spindle turning taper: 70 - 2300 rpm tailstock carriages: 0,038 - 0,152 mm/min spindle drive: 380 V, 2,2 kW Cgehxed I Az As Dui Tjt space needed: 1600 x 1600 x 2150 mm weight: 1420 kg

Condition: used, x-travel 400 - 800 mm y-travel 200 - 400 mm z-travel 200 - 400 mm total power requirement 3 kW weight of the machine ca. ? t Cjhxevrk Hto Dui Togt dimensions of the machine ca. ? m Short-term free from current operational resolution Untested, wear and tear due to age and use Price EXW / ex foundation Machine package 3 x Bridgeport 1 x Bridgeport design 1 x Kunzmann 2 x Fritz Werner 1 x DETOMBAY 2 x Reckermann

Condition: new, Year of construction: 2024, - FAGOR 3-axis position indicator, Mod.: 400iB INNOVA - Milling head +- 90° manually swiveling - Manual tool clamping using M 16 tightening screw for vertical and horizontal spindle - Swiveling control panel - Motor for horizontal and vertical spindle - Feed motors with inverter for X/Y/Z axis - Ball screw spindles in the X/Y/Z axes - Gearbox for 18 spindle speeds - Counterholder with support bearing - 1 long milling mandrel 27 mm - 3 reducing sleeves (MK1, MK2, MK3) - Spindle protection with safety switch - Splash protection on the 3 sides of the horizontal table - LED work light - Automatic lubrication for X/Y/Z guides - Mechanical handwheels for X/Y/Z axes - Coolant system - Cover for X/Z axes - Operating tool - Technical Documentation - CE version Colors: - RAL 7024 – graphite gray - RAL 7035 – light gray Technical data: Fixed angle table: Cehxjvunrfo Dui Tsgt - Dimensions of the work surface: 1,000 x 540 mm - T-slots: Number / width x distance: 8 pcs. / 14 x 63 mm - Max. table load: 300 kg Vertical table: - Dimensions of the work surface: 1,200 x 250 mm - T-slots: Number / width x distance: 8 pcs. / 14 x 63 mm Travel paths: - Axis travel paths: automatic/manual - Longitudinal (X): 600 mm - Transverse (Y): 500 mm - Vertical (Z): 400 mm Vertical milling head: - Tool holder: ISO 40 / DIN 2080 - Speed range: 40 - 3,200 rpm. - Number of spindle speeds: 18 (40 - 65 – 83 – 100 - 130 – 160 – 200 – 250 - 400 - 330 520 – 650 – 820 – 1,020 – 1,280 – 1,600 – 2,000 – 3,200) - Quill stroke, manual: 100 mm - Head swivel: +- 90° - Distance spindle nose/table: 70 - 470 mm - Distance spindle center to column - min./max.: 160 / 660 mm Horizontal spindle: - Tool holder: ISO 40 / DIN 2080 - Gear stages: 18 - Speed range: 40 - 3,200 rpm. - Distance from spindle center / to 2nd T-slot: 95 - 495 mm - Distance from spindle center / to 3rd T-slot: 180 - 580 mm Feeds: - Control: stepless - Range (X,Y,Z): 0 - 600 mm/min. - Rapid traverse (X,Y,Z axes): 600 mm/min. Motors: - Main drive power: 3.75 kW - Feed motor power (X-Y-Z): 0.35 kW - Coolant pump: 0.09 kW Dimensions and weight - Dimensions (W x D x H): 1,881 x 1,813 x 1,916 mm - Weight: 1,600 kg

Condition: used, Year of construction: 1999, automatic feed in all axes ACU-RITE 3-axis position display hydraulic tool clamping coolant system workplace lighting year of manufacture 1999 Specifications Working area: - Horizontal longitudinal movement of the table (axis X): 600 mm - Horizontal transverse movement of the milling head (axis Y): 400 mm - Vertical movement of the table (axis Z): 400 mm Clamping surface of the vertical table: - Length x height: 500 x 320 mm - Number/distance/size of T-slots: 5 / 50 mm / 14H8 Fixed clamping surface of the angle table: - Length x width: 800 x 400 mm - Number/distance/width of T-slots: 8 / 50 mm / 14H8 Feed and rapid traverse: - Motor power/speed: 1.5 kW / 940 rpm - Feed levels: 18 - Feed range of X and Y axes: 16 - 800 mm/min - Feed range of Z axes: 8 - 400 mm/min - Rapid traverse of X and Y axes: 2000 mm/min - Rapid traverse of Z axes: 1000 mm/min - Maximum feed force of X and Y axes: 8 + 4 kN - Maximum feed force of Z axes: 10 + 5 kN Drive and speed of horizontal spindle: - Motor power/speed: 4 kW / 1400 rpm - Speed levels: 18 - Speed range: 63 - 3150 rpm - Maximum permissible torque on the spindle clamp: 500 Nm - Tapered bore in the spindle: SK40 Hydraulic unit: - Operating pressure of tool clamping circuit: 10 MPa - Pump motor power/speed: 0.55 kW / 1395 rpm - Tank capacity: 15 l - Pump flow rate: 2.3 l/min Cooling device: - Pump motor power: 0.09 kW - Pump operating pressure: 0.04 MPa - Maximum amount of liquid pumped by the pump: 25 l/min - Maximum amount of liquid at the outlet: 7 l/min - Tank capacity: 40 l Required power supply: Cehx Duovtzkxji Togt - Operating voltage/frequency: 3x 400V / 50 Hz - Power consumption: 8.0 kW - Nominal fuse rating (user-side): 20 A - Control voltage: 24 V Machine dimensions: - Dimensions WxHxD: 1975 x 1910 x 1810 mm - Machine weight including angle table and vertical milling head: 2200 kg

Condition: good (used), Year of construction: 1980, Functionality: fully functional, feed length X-axis: 600 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 400 m/min, feed rate Y-axis: 400 m/min, feed rate Z-axis: 200 m/min, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, total height: 17,350 mm, total width: 16,450 mm, total length: 18,300 mm, table width: 800 mm, table length: 400 mm, power: 3 kW (4.08 HP), FNGJ 32 universal milling machine. Prod. TOS Celakovice. Table- 800x400 mm Spindle rotation - 40-2000 rpm Longitudinal and transverse feeds - 8-400 mm/min Vertical feeds - 4-200 mm/min Distance from the horizontal spindle axis to the working surface of the horizontal table : 125-525 mm Distance from vertical head spindle face to horizontal table surface : 58-458 mm X-axis travels - 600 mm Travels in Y axis - 400 mm Z axis travels 400 mm ISO cone - 40 Motor - 3 kW Cgshjtzxllsx Dui Tst Overall dimensions: L x W x H: 1830 x 1645 x 1735 mm Machine weight: 1725 kg Technical condition of the machine good. It is possible to make a visual inspection and check the machine in operation.

Condition: new, Universal milling machine with variable speed on vertical axis. Horizontal shaft speed adjustable by means of V-belts. Machine is delivered including: - Digital readout on 3 axes (Sino) - Feed on longitudinal and transverse displacement table - Pull rod M16 - collets set - Drill chuck 3 – 16 mm incl. ISO40 B18 mounting - Adapter sleeve ISO40-MC3 - Adapter sleeve ISO40-MC2 - cooling pump - work light - Horizontal arbor ISO40 – Ø22/Ø27 - T-slot bolts M14x55 (for mounting accessories on the table) Marke: KMS Typ : VF 420 Vario Spindelaufnahme: ISO 40 Spindeldrehzahl - : Vertikal: Variabel (100-600 / 350-2000 U/min) - : Horizontal: 9 Stück (600-1350 U/min) Cgehx Duijg Ul Nzo Tst Abstand vertikale Spindel - Säule: Einstellbar 250 - 650 mm Abstand Vertikalspindel - Tischfläche : 60 - 360 mm Abstand horizontale Spindel - Tischfläche: 20 - 320 mm Spindelverschiebung vertikal: 120 mm Tischgröße: 1000 x 240 mm Tischverschiebung: 580 x 230 mm Motor: - Vertikale Spindel 2,2 kW (3 PS) - Horizontalspindel 1,5 kW (2 PS) Maschinenabmessungen : 1500 x 1220 x 2100 mm Maschinengewicht : 850 kg Netzspannung: 400V

Condition: used, Year of construction: 2009, x-travel 560 mm y-travel 320 mm z-travel 400 mm turning speeds 25 - 2000 U/min turning speeds 18 Stufen spindle taper ISO 40 quill stroke 100 mm table: 320x1000 / 450x950 mm table load 125 kg Cjhx Duievix Dze Togt feed range 5 - 400 mm/min feed 18 Stufen rapid traverse 1.400 mm/min workpiece weight max. 125 kg T-slots 7x 14.0 mm total power requirement 4.2 kW weight of the machine ca. 1650 kg. range L-W-H 1800 x 1500 x 1780 mm from a training workshop - good condition (!!) New price ~ 25.000 euros Equipment: - electro-motorized universal milling machine - ACURITE 3-axis digital display - electro-motorized adjustment of all axes (X/Y/Z axis) * ball screws X and Y axis * rapid traverse in all 3x directions * electrical locking of all axes - electromagnetic brake for spindle stop * foldable milling spindle guard - coolant system - lower chip tray - vertical milling head with quill adjustment * milling head rotation 90° * tool holder ISO 40 with internal thread M16 - fixed box table 950 x 450 mm * number / size of T-slots 7 pieces / 14.0 mm * distance between T-slots 63.0 mm * minimum distance between base table / spindle axis 163 mm - Counterholder block for horizontal milling - Halogen lighting - Slatted cover on the vertical column guide - 4x machine feet - Central lubrication including container - Original operating instructions

Condition: new, Drilling capacity steel ----- 50 mm Milling capacity steel ----- 25 mm Tube milling capacity ----- 100 mm Longitudinal displacement (X) ----- 590 mm Sideways displacement (Y) ----- 175 mm Height offset (Z) ----- 320 mm Horizontal motor ----- 1.5 KW Vertical motor ----- 2.2 KW Horizontal milling spindle ----- 60 ~ 1350 r/min (9) Vertical milling spindle ----- stepless 100-600 / 350-2000 r / min Spindle mounting ----- ISO 40 Table ----- 1000 x 240 mm Weight ----- 1000 KG INCLUDED * DELTA frequency controller * 3-axis digital readout SINO * Automatic longitudinal and transverse feed table * LED lighting * Cooling system * Luxury control box * Tiltable milling head left/right 0-45 degrees * Rotatable work table * Various holders in case Cgshx Duiega Twfo Tot

Condition: good (used), Year of construction: 1971, Universal milling machine Macmon M200B (comparable to cover FP3) Year of manufacture 1971 machine no. 628/2 Cgshx Duoqup Agei Tot Traverse path X-axis 600 mm Y-axis travel 310 mm Z-axis travel 390 mm Speed range 37-1900 rpm Feed in 3 axes from 7-380 mm/min Rapid traverse in all 3 axes Vertical & horizontal spindle Vertical quill and horizontal quill extendable - SK-40 Tightening system S20x2 Rigid clamping table Coolant device Operating instructions 3-axis Fagor digital readout (X scale counts double) The machine has been technically checked and is fully functional. Spindle runout 0.002mm X-axis backlash 0.75mm Y-axis backlash 0.7mm Backlash Z-axis 0.2mm Installation area LxW: 1500x1500mm Weight approx. 1500kg

Condition: good (used), Functionality: fully functional, Machine weight: 1725 kg Total machine power: 3 kW Table clamping surface: 800x400 mm Longitudinal table movement - x-axis: 600 mm Transverse table movement - z-axis: 400 mm Vertical table movement - y-axis: 400 mm Cgshx Djvzkzceui Tjt Spindle taper: ISO 40 Spindle speed: 40-2000 rpm Working longitudinal feed - x-axis: 8-400 mm/min Working transverse feed - z-axis: 8-400 mm/min Working vertical feed - y-axis: 8-400 mm/min Rapid feed x/z/y: 2000/2000/1000 mm/min Max. workpiece weight: 400 kg

Condition: good (used), Year of construction: 1979, Model making milling machine, universal model milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine, model making milling machine Cgshx Djnzpx Reui Tot -Manufacturer: Zimmermann, universal milling machine type FZ 1 with extensive accessories -rotating cross table: 490 x 400 mm -Travel: X/Y/Z 320/385/430 mm -Spindle holder: SK30 -Drive: 1.1 kW -Speed: 560 to 14000 rpm, 8-stage -Accessories: incl. see photos -Dimensions: 1000/680/H1970 mm -Weight: 477 kg

Condition: used, x-travel 510 mm y-travel 450 mm z-travel 410 mm taper in main spindle MAS BT 45° (SK40) table surface area 800 x 395 mm T-slots 6 Stk. turning speeds 50 - 2500 U/min feed stepless 4-1600/4-1000 mm/min voltage 400 V total power requirement 5.0 kW Cgohx Dusu Sbauji Tst weight of the machine ca. 1400 kg range L-W-H 2300 x 2300 x 1800 mm from a training workshop maintained condition (!!) Furnishing : - robust universal milling machine - swiveling control panel, right front - rotatable universal milling head (re/li = 90°) * with hydraulic tool clamping - manual milling spindle feed, with locking - swiveling milling spindle protection - Stable T-slot clamping/angle table - Axis feeds with rapid traverse - Central lubrication unit - Control cabinet, installed on the left * Digital display - without function * Machine link : ?machineno=1008-9131203

Condition: used, Year of construction: 1971, Model making milling machine, universal model milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine, model making milling machine, vertical milling machine -Manufacturer: Steinel, vertical milling machine type SV 4 -Clamping table: 740 x 200 mm -Cross table: 620 x 130 mm -Travel: X/Y/Z 340/100/300 mm -Spindle holder: MK2 Cgohx Duiot E D D Is Tet -Speed: 112 - 2240 rpm right/left rotation -Feed: 0.10 - 0.71 mm/min -Quill stroke: 100 mm -Coolant system: -Dimensions: 1000/950/H1830 mm -Weight: 650 kg

Condition: used, Year of construction: 1973, x-travel 550 mm y-travel 155 mm z-travel 350 mm taper in main spindle SK 30 / DIN 2080 table surface area 640 x 200 mm turning speeds 50 - 1500 U/min feeds 30 - 340 mm/min distance spindle - column 165 mm distance spindle nose and table 245 mm Cgohxeu Sbano Dui Tet voltage 380 V total power requirement 1.3 kW weight ca. 1250 kg range L-W-H 950 x 1000 x 1600 mm from a vocational school (!) Furnishing : - robust / conventional universal milling machine - rotatable / swiveling vertical milling head - Stable T-slot clamping/angle table - automatic table longitudinal movement - Feed range adjustable - 8x steps - Pole-changing drive motor

Year of construction: 1964, Condition: used, machine/vehicle number: 38792, Milling machine, universal milling machine, tool milling machine, drilling and milling machine -clamping table: 705 x 310 mm -Device table: rotatable/tiltable/swiveling -X/Y/Z travel: 550/340/420 mm Cgjhx Duijfgrpns Tst -Spindle mount: SK40 -Speeds: from 46 to 2110 rpm -Feed: 12 to 254 mm/min -Pinole stroke: 80 mm -Rapid traverse: mm/min -Coolant device: -Dimensions: 1620/1700/H1810 mm -Weight: 1768 kg

Condition: used, machine/vehicle number: 314, Milling machine, universal milling machine, tool milling machine, two-spindle milling machine, milling machine -Milling machine: Two-spindle milling machine for small parts -Dimensions: see photos -Drive: 0.37 kW each -Coolant device -Dimensions: 1000/850/H1360 mm Cgohx Dshyut Rsui Tjt -Weight: 352 kg