Condition: good (used), Year of construction: 2004, Functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller model: Siemens 840D Powerline, spindle speed (max.): 18,000 rpm, TECHNICAL DETAILS X-axis: 600 mm Y-axis: 700 mm Z-axis: 600 mm C-axis swivel angle: 360° Control type: Siemens 840D Powerline Spindle system Spindle speed: 18,000 rpm Tool holder: HSK-A 63 (according to DIN 69893) Tool changer & magazine Tool changing device: Horizontal Magazine type: Chain magazine Capacity: 120 tool positions NC rotary table & pallets Croln Tcsv E Hz Hebhsb Pallet carrier: Integrated Number of pallets: 3 x (530 mm x 500 mm) Cooling system & measuring technology Coolant tank: 500 L IKZ: Form AD Measuring probe: Heidenhain TS 641 (infrared) Tool measurement: Blum Laser (tool length & diameter measurement horizontal/vertical) MACHINE DETAILS Machine dimensions (LxWxH): 4,500 x 2,300 x 2,790 mm Total weight of the machine: 8.2 t Transport dimensions: 2.9 x 2.6 x 2.3 m Transport weight: 6.5 t Tool magazine: 1,300 kg (240 x 190 x 220 cm) Chip conveyor: 540 kg (440 x 60 x 170 cm) Cooling lubricant system: 950 kg (220 x 140 x 220 cm) EQUIPMENT - B-axis available - Automatic swivel milling head - Rotating pallet changer - 3D path control - Hydraulic connection for clamping hydraulics on the pallet (pipe screw connection 2 x G1/4") - Pallet and program management ("LPC") for Siemens 840 CPL - Software adaptation for pressure level control (40-240 bar in the work area, max. 150 bar at the setup station) - E-Plan & documentation in German

Condition: good (used), Year of construction: 2009, Functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 48 m/min, Equipment: chip conveyor, documentation/manual, Technical data: X = 3,000 mm (table 3,500 mm) Y = 600 mm Z = 800 mm Horizontal Z = 700 mm Vertical - Rotation angle 1 degree (Hirth gearing) - Swivel angle up to 95 degrees - Spindle mount HSK 63-A Colsv A U Atjn Tcbhorb - Speed range 20-12,000 rpm - Tool magazine for 36 tools - 3D measuring probe with radio control with radio signal transmission - Tool length max. 380 mm - Control Heidenhain iTNC 530 - Powered CNC rotary table for 3D machining - Hard disk 26 gigabytes - Rapid traverse 48 m/min. in X, Y and Z axes - High pressure cooling along and through the spindle (70 bar) - Coolant tank 900 l - Automatic doors

Condition: good (used), handheld terminal, handheld control device, operating unit, control panel, operating panel, operating unit, operating device, programming device -Manufacturer: Siemens, Simatic S5 operator panel -Type: OP 393 III 6ES5393-OUA 15 -Protection class: IP 50 -Number: 2x control unit available Croln Tjdngwkscbhjb -Price: per piece -Dimensions: 148/320/H55 mm -Weight: 0.7 kg/piece

Year of construction: 2024, Condition: new, NEW AUTOMATIC DOSER For collecting screws and bolts after stamping and threading Machine acc. to standard MACHINERY DIRECTIVE 89/392/EEC Celn Tcjtvpkmebherb TECHNICAL FEATURES: MODEL SLP-1000 EXTERN DIAMETER 1.000 mm MIN. HEIGHT WITH STAND 750 mm MIN. HEIGHT WITH STAND AND WHEELS 900 mm MIN. UNLOADING HEIGHT 550 mm NUMBER OF CONTAINERS 10 Pcs. UNIT CAPACITY CONTAINERS 12 dmᵃ MACHINE WEIGHT 370 Kg. ENGINE: DRIVING FORCE VOLTAGE 380 V. TOUCH VOLTAGE 24 V. FREQUENCY 50 Hz. ENERGY CONSUMPTION 0,37 KW Available from H.B.R. srl - Calolziocorte (LC) - Agent for Europe

Condition: ready for operation (used), Year of construction: 1998, operating hours: 19,162 h, Functionality: fully functional, machine/vehicle number: 1108 000002 3, travel distance X-axis: 600 mm, travel distance Y-axis: 525 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 12,000 rpm, swivel angle B-axis (min.): -90 °, swivel angle B-axis (max.): 90 °, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS X-travel: 600 mm Y-travel: 525 mm Z-travel: 500 mm Cslsv Exhxon Tcbhjrb Control system: HEIDENHAIN Head swivels: ±90° Work table Table clamping area: 1,000 x 543 mm Table load: max. 350 kg Spindle Spindle mount: SK 40 Standard: DIN 69871 Spindle speeds (infinitely variable): 20 - 12,000 rpm Feeds and rapid traverse Feeds X/Y/Z axis: 20 - 10,000 mm/min Rapid traverse X-axis: 18 m/min Rapid traverse Y-axis: 18 m/min Rapid traverse Z-axis: 15 m/min MACHINE DETAILS Total power requirement: 26 kVA Machine weight: approx. 4.2 t Machine dimensions (L x W x H): 2.95 x 2.1 x 2.26 m Coolant system: yes On time: 24,220 h Spindle hours: 19,162 h Any visible vices, tool holders and chucks are not part of the scope of delivery!

Condition: good (used), Year of construction: 2001, Functionality: fully functional, Controller HEIDENHAIN TNC426/430 Table size 1500 x 800 mm Table load:1100 kgs X travel 1150 mm Y travel 710 mm Z travel 710 mm A axis 0 - 360 degree Spindle speed 12000 rpm Tool holder type SK40 ATC magazin 32-fold Spindle power Power required 62 kVA Weight cca 9700 kg Dimensions LxWxH = 3600 x 2800 x 3000 mm Accessories - Coolant unit - NC table - Chip conveyor Csln Tcotyx Huobhjrb - MPG - Manuals The machine is in very good technical and optical condition. Under power in Hungary.

Condition: ready for operation (used), Year of construction: 2002, Functionality: fully functional, feed length X-axis: 2,300 mm, feed length Y-axis: 800 mm, feed length Z-axis: 600 mm, controller model: Hieidenhain TCN 423, overall weight: 13,000 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 25,000 W, number of slots in tool magazine: 30, Equipment: rotational speed infinitely variable, The machining center is ready for use. Crolnjv Imlwj Tcbhob

Condition: good (used), Year of construction: 2000, Table size 1000 x 600 mm Tool holder, DIN 69872 SK 40 X-axis travel, longitudinal 630 mm Y-axis, transverse 560 mm Z-axis, vertical 560 mm Max. Table load 400 kg Speed range - 12,000 rpm Feed range X/Y/Z 20 - 10,000 mm/min. Rapid traverse X/Y 26 m/min Rapid traverse Z 20 m/min Drive power (100 % duty cycle) 13 kW Drive power (40 % ED) 16 kW Machine dimensions L x W x H approx. 3500 x 2200 x 2330 mm Machine weight 6700 kg Coolant system dimensions L x W x H 1710 x 1185 x 1870 mm Weight approx. 180 kg Accessories / Special features: - CNC contouring control HEIDENHAIN MillPlus Celnjr A D Dds Tcbhsrb - 20-fold tool changer - Chip conveyor - IKZ through spindle center Form AD - Rotating viewing window - CE-compliant Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel

Condition: refurbished (used), Year of construction: 2018, Functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Z-axis: 550 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, feed length X-axis: 2,000 mm, feed length Y-axis: 600 mm, feed length Z-axis: 550 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, total height: 3,200 mm, total length: 6,350 mm, total width: 3,150 mm, table length: 1,250 mm, rotary table diameter: 600 mm, overall weight: 15,000 kg, spindle motor power: 17,000 W, spindle nose: ISO 40, tool length: 300 mm, tool weight: 7,000 g, Equipment: chip conveyor, documentation/manual, Vertical machining center FAGIMA Jazz L5 AX TECHNICAL CHARACTERISTICS : CNC control : HEIDENHAIN iTNC 640 Number of simultaneous axes : 5 Stroke X axis : 2000 [mm] Stroke Y axis : 600 [mm] Stroke Z axis : 550 [mm] Feed rate on X, Y and Z axes : 20000 [mm/min] Traversing feeds X, Y and Z axes : 40000 [mm/min] Axes acceleration : 2.5 [mm/sec²] Min. distance spindle nose / table : 30 [mm] Table length : 1250 [mm] Table width : 800 [mm] Max. load on table : 500 [Kg] Rotary tilting table surface : 600 x 600 [mm] Stroke C axis : table revolution : 360 [°] Max. speed C axis : 25 [rpm] B axis swivelling stroke : -110 / +110 [°] Spindle type : ISO 40 Max. spindle speed : 15000 [rpm] Spindle power : 17 [kW] Tool changer magazin number of stations : 80 Max. tool length : 300 [mm] Max. weight of single tool : 7 [Kg] Total max. weight in tool changer magazin : 400 [Kg] Total power required : 57 [kVA] Supply voltage : 400 [V] Number of hours under power : 17840 [h] Weight : 15000 [Kg] EQUIPMENT INCLUDED : - HEIDENHAIN glass scales on all 3 axes - Coolant through spindle (20 bars) - Chip conveyor - Blowing inside + outside spindle - Collision monitoring - Simultaneous 5-axis software - Electrical cabinet chiller - HEIDENHAIN part probe - HEIDENHAIN tool probe Machine visible under power in our premises by appointment. Price on request, loading on truck included. Csln Tjvr Tlrscbhorb Worldwide shipping is possible. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. The FAGIMA Jazz L 5 AX is a 5-axis continuous pendulum machining centre designed to provide optimum precision and flexibility for complex machining operations. Thanks to its 5 continuous axes, it can machine complex parts in a single configuration, reducing set-up times and increasing productivity. This machining centre is ideal for the aerospace, medical and automotive sectors, where tight tolerances and machining quality are essential. Comparable to well-known brands such as Mikron, Hermle, DMG Mori, Mazak, Hedelius, AXA, Chiron, Matec, Reiden, Lagun, Haas and Alzmetall, the FAGIMA Jazz L 5 AX stands out for its ability to integrate milling, drilling and tapping operations with high precision. In addition to its multi-axis machining capabilities, it integrates perfectly into workshops equipped with CNC grinders, milling machines or machining centres, creating a complete solution for versatile machining operations.

Condition: used, Year of construction: 2003, x-travel 630 mm y-travel 560 mm z-travel 560 mm control iTNC 530 Heidenhain Main spindle: turning speed range - main spindle 20 - 12.000 min/-1 power capacity - main spindel 15 / 10 kW max. Torque 125 Nm tool taper MAS BT 40 swivellable B: 103 ° feed: feed speeds 20 - 10.000 mm/min rapid traverse X-axis 26 m/min rapid traverse Y-axis 26 m/min rapid traverse Z-axis 20 m/min Resolution 0,001 mm input unit 0,001 mm work table: surface area 1.000 x 600 mm rotary table dia. 600 mm number of T-slots 8 / 1 T-slot - width 14 H12 / 14 H7 T-slot - distance 63 mm max. table loading capacity 350 kg rotatable C: 360 ° Tool-Presetter: number of toolpositions 24 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 315 mm max. tool weight 8 kg total wight max. 100 kg total power requirement 26 kVA weight of the machine ca. 6,7 t dimensions of the machine ca. 4,0 x 4,0 x 3,0 m CNC - MachiningCenter Universal DECKEL MAHO - DMU 60 T - 5-Axis Crjlevn Utcsn Tcbhob - controled NC-Swivel-Milling-Head ( B-Axis ) - Rotary Table integrated in Working-Table ( C-Axis )

Condition: ready for operation (used), Year of construction: 1998, operating hours: 17,785 h, Functionality: fully functional, machine/vehicle number: 1108 000006 3, travel distance X-axis: 600 mm, travel distance Y-axis: 525 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 12,000 rpm, swivel angle B-axis (min.): -90 °, swivel angle B-axis (max.): 90 °, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS X-travel: 600 mm Cjln Tcsv Exgzsbhsrb Y-travel: 525 mm Z-travel: 500 mm Control system: HEIDENHAIN Head swivels: ±90° Work table Table clamping area: 1,000 x 543 mm Table load: max. 350 kg Spindle Spindle mount: SK 40 Standard: DIN 69871 Spindle speeds (infinitely variable): 20 - 12,000 rpm Feeds and rapid traverse Feeds X/Y/Z axis: 20 - 10,000 mm/min Rapid traverse X-axis: 18 m/min Rapid traverse Y-axis: 18 m/min Rapid traverse Z-axis: 15 m/min MACHINE DETAILS Total power requirement: 26 kVA Machine weight: approx. 4.2 t Machine dimensions (L x W x H): 2.95 x 2.1 x 2.26 m Coolant system: yes On time: 18,534 h Spindle hours: 17,785 h Any visible vices, tool holders and chucks are not part of the scope of delivery!

Condition: excellent (used), Year of construction: 2020, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,300 mm, controller manufacturer: Heidenhain, controller model: TNC 640, WORKSPACE CLADDING The work area is completely enclosed. - Opening width of the doors for UniSpeed 3000: 2900 mm DESIGN VIEWING WINDOW SAFETY GLASS ELECTRIC DOOR DRIVE Platform MAIN DRIVE Driven by a frequency-controlled liquid-cooled AC motor. The power is transmitted directly to the milling head without an intermediate gearbox. gearbox. - 32 kW drive power at 100% ED - 44 kW drive power at 40 % ED Torque depending on the selected speed variant. - Speed from 10 to a maximum of 6,000 rpm - Torque 637 Nm at 100% ED - Torque 875 Nm at 40 % ED TOOL HOLDER SK 50 BIG-PLUS AUTOMATIC UNIVERSAL MILLING HEAD IN ORTHOGONAL DESIGN (C-AXIS 1 ° ) - Liquid-cooled milling head - Cast construction made of GGG 60 - Axes swivel automatically - Swivel range of the milling head holder (C-axis) ± 180° in degrees - Swivel range of the milling head (A-axis) in degrees± 180° - Indexing of the axes via face gearing with Partial accuracy ±3 sec - 64,800 full degree positions can be programmed via the CNC control can be programmed - Milling head with maintenance-friendly half-shell technology - Low interfering contour due to compact design and completely internal media channels - Tool holder according to selected variant - The milling spindle is equipped with a hydromechanical tool tool clamping system HEIDENHAIN KINEMATICS OPT - Internal coolant supply - External coolant supply via nozzle ring - Drive via frequency-controlled, liquid-cooled main drive motor - Speed range depending on the selected speed option of the main drive Clamping surfaces for the work area: CNC ROTARY TABLE with generously dimensioned bearings - Clamping surface: 1,600 mm - Table load (centric): 8,000 - Maximum swing diameter of the workpiece: 2,400 mm Tool changer ToolTower AUTOMATIC TOOL CHANGER - Number of tools in the ToolTower: 102 places - Maximum tool diameter with full magazine: 125 mm - Maximum tool diameter with free neighboring slots: 250 mm - Maximum tool length: 500 mm - Maximum tool weight: 30 kg - Maximum tool load torque: 440 Nm - Pure tool change time: Approx. 7 sec. - Spindle position for tool change: vertical - Fixed position coding Coolant system 950 l Frequency-controlled high-pressure pump with infinitely variable pressure control Colnovbf Dle Tcbhsrb via the control unit. Pump capacity: 32 I/min at max. 40 bar Coolant tank: 950 l Filter accuracy:

Condition: ready for operation (used), Year of construction: 1997, operating hours: 32,337 h, Functionality: fully functional, machine/vehicle number: 120245, travel distance X-axis: 1,250 mm, travel distance Y-axis: 880 mm, travel distance Z-axis: 800 mm, workpiece weight (max.): 2,000 kg, spindle speed (max.): 18,000 rpm, Equipment: documentation/manual, TECHNICAL DETAILS Coln Tcbjv Ana Sjhorb Control: Heidenhain Number of axes: 5 Travel paths (X/Y/Z): 1250 x 880 x 800 mm Table size: 1250 x 800 mm Max. table load: 2000 kg Spindle speed: 18,000 rpm Tool holder: 60 positions MACHINE DETAILS Machine dimensions (LxWxH): 7000 x 2500 x 2900 mm Total weight: 12,500 kg

Condition: used, Year of construction: 2005, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, controller manufacturer: HEIDENHAIN, controller model: ITNC 530, overall weight: 7,700 kg, spindle speed (max.): 20,000 rpm, CONTROLS .. CNC controls HEIDENHAIN ITNC 530 WORKING RANGE -CUBIC- .. X-axis travel: 600 mm .. Y-axis travel: 450 mm .. Z-axis travel: 450 mm .. rotating range B-axis from: -115 ° .. rotating range B-axis up to: 30 ° .. rotating range C-axis from: 0 ° .. rotating range C-axis up to: 360 ° TABLE .. clamping surface diameter: 450 mm .. workpiece load (max): 200 kg Coln Tcbeurcgbohsrb SPINDLE / HEAD .. spindle revolutions (max): 20000 /min .. tool fixture: HSK A63 TOOL MAGAZINE .. number of positions: 120 ELECTRICAL SPECIFICATIONS .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. total weight approx.: 7700 kg ATTACHMENTS .. workpiece sensor: yes .. chip conveyor: yes .. coolant unit: yes .. band filtration unit: yes .. through spindle coolant attachment: yes .. closed cabin: yes Equipment: - without workpiece storage

Condition: good (used), Year of construction: 2001, manual rotary swivel table, plane transformation, electronic angle display in axes B and C coolant device, el. handwheel HEIDENHAIN Ethernet interface, BA 4, Technical details x-path 500 mm y-path 400 mm z-path 400 mm spindle speed 9000 1 / min Croln Tcbovtxtwohob tool holder SK 40 spindle motor 13 / 9 kW control HEIDENHAIN TNC 426 / 430 tool change device 16 positions table size 700 x 500 mm total power requirement 17 kVA

Condition: used, Year of construction: 2002, x-travel 880 mm y-travel 630 mm z-travel 630 mm control iTNC 530 Heidenhain Main spindle: turning speed range - main spindle 20 - 10.000 min/-1 power capacity - main spindel 13 kW Torque 130 Nm tool taper BT 40 DIN 69872 work table: table surface area 1.250 x 700 mm max. table load ca. 500 kg table diameter 700 mm T-slots 11x 14 x 63 mm max. table speed 15 min/-1 tool magazin: number of toolpositions 32 (2x 16) pos. tool taper BT 40 max. tool diameter 80 / 130 mm max. tool-dia with free toolbox 160 mm max. tool length 315 mm max. tool weight 8,0 kg feeds: feed speeds 20 - 15.000 mm/min rapid traverse 12 m/min total power requirement 30 kVA Crjln Tcbevn Ur Sohob weight of the machine ca. 9,0 t dimensions of the machine ca. 4,0 x 3,0 x 2,5 m CNC - MachiningCenter Universal DECKEL MAHO - DMU 80 T - 5-Axis - Rotary table in Fixed-Table - Retrofitting to SK 40 optionally possible!

Condition: ready for operation (used), Functionality: fully functional, machine/vehicle number: 570 023 4, travel distance X-axis: 710 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 520 mm, table width: 500 mm, table length: 700 mm, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS X-axis travel: 710 mm Y-axis travel: 520 mm Z-axis travel: 520 mm Work table length: 700 mm Coln Tcev Exdmobhorb Work table width: 500 mm Spindle Spindle speed (min.): 20 rpm Spindle speed (max.): 12,000 rpm Spindle motor power: 25,000 W Rapid traverse speed & feed rate X-axis rapid traverse: 30 m/min Y-axis rapid traverse: 30 m/min Z-axis rapid traverse: 30 m/min X-axis feed rate: 10 m/min Y-axis feed rate: 10 m/min Z-axis feed rate: 10 m/min MACHINE DETAILS Total height: 3,300 mm Total length: 4,600 mm Total width: 5,500 mm Total weight: 6,000 kg Input voltage: 400 V Type of input current: three-phase Any vices, tool holders and chucks shown are not part of the scope of delivery!

Year of construction: 2003, Condition: excellent (used), Matsuura MAM72-3VS, 5-axis vertical Machining center Year of construction 2003 Commissioning 2004 Fanuc 16iMB control X/Y/Z axis travel: 680 / 400 / 625mm B-axis travel: +65ºto -110ºC C-axis travel: 360º Distance pallet-spindle nose: -86 - 540mm (B axis is in position 0º) Pallet center to spindle nose distance: 60 - 685mm (B axis is in position -90º) Distance pallet center column guide: -25 - 375mm distance spindle center - column guide: 227mm distance OK floor-pallet surface: 1165mm Working surface diameter: 130mm Max. Pallet load: 60kg Spindle speed: 40 - 15.000 rpm Spindle taper: 7/24 steep taper #40, Big PLUS Spindle diameter: 80mm Max. Spindle Torque: 135Nm / 850 rpm (15/7.5kW) Croljldd H Eon Tcbhob rapid traverse X/Y/Z: 30m/min B-axis: 10 rpm C-axis: 13,5 rpm feed X/Y/Z: 1 - 15m/min B axis: 1 - 2160º/min C axis: 1 - 3600º/min Number of tools: 240 Max. tool Ø: 80mm with free neighbor stations: 150mm Max. Tool length: 260mm Max. Tool weight: 8kg Pallet changer with 40 pallets Max. Workpiece dimensions: 360mm Ø x 250mm height Machine height: 3210mm Machine weight: 11700kg floor space, approx.: 4945 x 3655mm Encoder for B- and C-axes, direct measuring system (Heidenhain) for X-, Y-, and Z-axis 30l/min / 20bar internal cooling Scraper belt chip conveyor timer power on / power off Measuring probe RENISHAW MP 10 Easy Probe Laser Renishaw NC 1 2MB memory 8 additional M-functions Number of tool offsets 999 Increase of workpiece coordinate systems from 6 to 54 Coordinate system rotation G68/G69 Automatic zero point tracking Program restart For further information on the machine, please refer to the enclosed brochure.

Condition: excellent (used), Year of construction: 2014, Control Heidenhain Siemens 840 D SL Working area: 700 mm x 420 mm x 380 mm (x/y/z) Integrated NC swivel rotary table SK 30 Max. Speed 10.000 1/min Direct path measuring system X,Y,Z External blast air Handwheel Number of tool positions 25 pos. Max. tool diameter 80 mm Max. tool length 250 mm max. tool weight 3 kg Changing time chip - chip 1.5 sec Feed rates: Feed speed 1 - 60,000 mm/min. rapid traverse 60 / 60 / 60 m/min Max. feed force 5,000 N Total power requirement 18 kVA Celnoru Azve Tcbherb Machine weight approx. 4.1 t Space requirement approx. 3.0 x 3.0 x 2.8 m

Condition: used, Year of construction: 2005, x-travel 880 mm y-travel 630 mm z-travel 630 mm control iTNC 530 Heidenhain Main spindle: turning speed range - main spindle max. 18.000 min/-1 power capacity - main spindel 28 / 19 kW max. Torque 121 / 82 Nm tool taper HSK-A 63 swivellable B: +30° / -120 ° NC-Rotary table: table surface area Ø 700 / 1.250 x 700 mm Cslsvn Ur Esn Tcbhsrb max. table load 650 kg rotatable C: 360 ° max. workpiecediameter 850 mm max. workpiece height 550 mm tool magazin: number of toolpositions 32 pos. tool taper HSK-A 63 max. tool diameter 80 mm max. tool-dia with free toolbox 160 mm max. tool weight 8,0 kg change-time chip to chip 10 sec feeds: feed speeds max. 30.000 mm/min rapid traverse 30 m/min Accelaration 5 m/s² total power requirement 48 kVA weight of the machine ca. 14,0 t dimensions of the machine ca. 6,5 x 5,0 x 2,9 m 5 Axis CNC - MachiningCenter Universal DECKEL MAHO - DMU 80 monoBLOCK - NC-Rotary Table (C-Achse) integrated in rigid-table - Swivel-Milling-Head (B-Axis) - only 6.100h Power-On Hours

Condition: good (used), Year of construction: 2008, operating hours: 11,667 h, Functionality: fully functional, machine/vehicle number: 5X1005, travel distance X-axis: 1,100 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 810 mm, spindle speed (max.): 14,000 rpm, swivel angle B-axis (min.): -120 °, swivel angle B-axis (max.): 30 °, swivel angle C-axis (max.): 360 °, TECHNICAL DETAILS Commissioning: November 2009 Csln Tsv Ew T Hscbherb Travel paths X - Y - Z: 1,100 - 610 - 810 mm CNC rotary table: 610 mm NC controlled milling head (B-axis): +30° / -120° Spindle Spindle speed: 14,000 rpm Double gripper with tool magazine: 40-way Internal coolant supply: 40 bar with MAHLE filter HEIDENHAIN CollisionMonitoring: yes M & H infrared measuring probe: yes Operating mode: 2 MACHINE DETAILS Spindle running hours: 11,668 h Switch-on time: 31,053 h Control switch-on time: 42,230 h Spindle replacement: March 2017 Weight: 7.5 t Connected load: 75 kVA EQUIPMENT - Central lubrication - Control cabinet - Telescopic covers - Water cooler - Heidenhain scales in all axes - Chip conveyor: hinged belt design in X-axis - Coolant system - Work lamp - Machine cover - Machine manuals - HEIDENHAIN CollisionMonitoring - M & H infrared measuring probe - 40-way tool magazine - Internal coolant supply with 40 bar MAHLE filter - Chip conveyor in hinged belt design Any visible vices, tool holders and chucks are not part of the scope of delivery!

Year of construction: 1995, Condition: used, 3-axis machine Dialog 12 control Table size 800x400mm working range: x-axis movement 500 MM y-axis movement 400 MM Crjln Tcoh Dh Atebheb z-axis movement 400 MM spindle speed up to 5,000 rpm Electr. handwheel

Condition: excellent (used), Year of construction: 2011, Verfahrwege: X850 x Y500 x Z610 mm 2-Achsen Schwenk-Rundtisch FIBRO HEIDENHAIN iTNC 530 Tischdurchmesser 400 mm HEIDENHAIN Messlineale x,y,z Sperrluft Handrad HR-410 Wasserpistole Hauptspindel 12.000 Upm mit Direktantrieb 10/17 kW Luftkühlung durch die Spindel 40-fach Werkzeugwechsler SK 40 Crsljg N Adbsn Tcbhjb Schneckenförderer links und rechts Späneförderer Vertikale Schutzabdeckung aus Stahllamellen bis zum Dach M&H Infrarot Messtaster

Condition: used, Year of construction: 2002, x-travel 800 mm y-travel 700 mm z-travel 600 mm control iTNC 530 Heidenhain Main spindle: turning speed range - main spindle max. 18.000 min/-1 power capacity - main spindel 19 / 28 kW max. Torque 121 Nm tool taper SK 40 DIN 69871 b - axis 0,001 ° pallet changer: numbers of pallets 2 size of pallet 800 x 630 mm pallet diameter Ø 800 mm max. table load 800 / (1.600) kg rotatable C: 360 ° resolution 0,001 ° max. table speed 13,6 U/min T-slots 50 H6 tool magazin: number of toolpositions 60 pos. tool taper SK 40 DIN 69871 max. tool diameter 100 mm max. tool-dia with free toolbox 160 mm max. tool length 350 / 315 mm max. tool weight 10 kg feeds: feed speeds 20 - 15.000 mm/min rapid traverse 50 m/min total power requirement 59 kVA weight of the machine ca. 10 t Crjlsvn Urxjn Tcbhjb dimensions of the machine ca. 4,0 x 7,0 x 2,7 m 5 Axis CNC - MachiningCenter Universal DECKEL MAHO - DMC 80 U hi-dyn - Swivel-Milling-Head - pallet-changer - WITHOUT clamping elements / WITHOUT pallets

Condition: ready for operation (used), Year of construction: 2008, Functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 1,200 mm, controller model: Heidenhain iTNC 530C, spindle speed (max.): 7,500 rpm, number of slots in tool magazine: 60, Equipment: chip conveyor, The machine was recently repainted (inside and out) TECHNICAL DETAILS X-axis: 2,000 mm Y-axis: 900 mm Z-axis: 1,200 mm Rapid traverse speed (X/Y/Z): 30 / 30 / 25 m/min Main spindle Speed range: 30 - 7,500 rpm Drive power: 25 kW Max. torque: 540 Nm Tool holder: SK 50 DIN 69871A Swivel range: ±115° Resolution: 0.001° Distance spindle nose - table Vertical: 0 - 740 mm Horizontal: 250 - 1,050 mm NC rotary table Faceplate diameter: 1,500 mm Table speed: 20 rpm Max. table load: approx. 1,500 kg Tool changer Capacity: 60 tools Tool holder: SK 50 Max. tool diameter: 110 mm Max. tool diameter with free adjacent tool box: 180 mm Max. tool length: 400 mm Max. tool weight: 15.0 kg Crslnjv D N Ime Tcbhob Changeover time: approx. 8.0 s MACHINE DETAILS Dimensions: approx. 10.0 x 7.0 x 4.0 m Weight: approx. 33.0 t Connected load: 75 kVA Operating hours: The last service visit was in December 2019. At that time, the operating hour meter showed 42,554 hours, which was confirmed in writing by the manufacturer, AXA. The machine was dismantled in February 2020. EQUIPMENT - Swivel milling head, continuously adjustable positioning - Pick-up station - Coolant system with high-pressure cooling - Internal coolant supply - Oil mist extraction - Paper belt filter - Hydraulic unit - Measuring probe - Electric handwheel - Various tool holders (approx. 10 pieces) Rotary table is sold without the chuck shown. Any vises, tool holders, and jaw chucks shown are not included!