Used Laser cutting machines 3000-3999mm (x-travel) for sale (310)

Condition: used, Year of construction: 2008, Working hours laser on: 57785 (23.03.2022) h Working hours beam on: 40160 (23.03.2022) h Laser power: 5000 Watt Control: Siemens 840 D Working range laser: 3000 x 1500 x 115 mm Max. steel: 25 mm Max. stainless steel: 20 mm Max. aluminium: 12 mm Length: 11100 mm Width: 4600 mm Height: 2400 mm Machine weight: 12000 kg Electrical connected load: 105 kVA Standard configuration - Closed machine frame with integrated laser unit - Gantry drive in combination with direct linear drives- Automatic pallet changer- Conveyor belt for small parts / slug- Work area lighting- Positioning laser diode- Oil spray device- HI-LAS- HI-LAS Plus- AutoLas Plus- PMS Plasma sensor- PCS TRUMPF Laser- CO2 laser TLF 5000- Cooling unit- Radio-frequency excitation- Laser power control- Programmable cutting gas pressure- Logbook function laser Cutting head- Universal quickchange device for cutting head Control Unit- Control Siemens Sinumerik 840 D- Automatic shut down mechanism- DIAS III- ContourLas- SprintLas- RJ45 network connection- Spray device for reliable thick plate machining Safety- Light barriers Programming - Workshop programming ToPs 100 lite Extended machine accessories Crslsuqdgtergi Eqsb Automation

Condition: new, Year of construction: 2025, Parker-Airtech presents the latest generation of nitrogen generators, which impress with an outstanding air factor on the market. Our systems are characterized by the exclusive use of high-quality components, which ensures their longevity and reliability. Crolrgi Eonq Aiboqsb The cost-effective operation of the system is characterized by low power consumption with maximum output, low-maintenance operation of the system, no additional gases such as hydrogen to reduce oxygen and high-quality and durable components. This means that the system can pay for itself in the shortest possible time. An intelligent monitoring system enables continuous monitoring of the operating parameters and ensures that you are always informed about the status of your system. Whether in the office or on the go - our system can also be conveniently viewed on your mobile phone, so that you always have control over your nitrogen production. The system is individually tailored to your needs. Parker-Airtech has made it its mission to offer you the best technologies to optimally support and maximize your processes. Trust in innovation, quality and performance - choose Parker-Airtech.

Condition: good (used), Year of construction: 2011, operating hours: 15,971 h, Functionality: fully functional, laser power: 4,000 W, laser hours: 15,971 h, overall weight: 22,500 kg, sheet thickness (max.): 8 mm, Application by the end of 2024 - submission of bids obliges timely collection. Machine including special equipment and automation TECHNICAL DETAILS Working area: 2500 x 1250 mm Laser: TruFlow 4000 Laser power: 4000 W Punching Max. sheet thickness: 8 mm Max. Workpiece weight: 200 kg Max. Punching diameter: 76.2 mm Liner arm magazine: 22 tool positions with 3 clamping claws Punching force: 220 kN Parts flap: 500 x 500 mm Control system Control type: Rexroth IndraMotion MTX Positioning accuracy: 0.1 mm Operating data Operating hours: 80,968 / 81,053 / 15,971 h MACHINE DETAILS Length: 8070 mm (basic machine) Width: 8550 mm (basic machine) Height: 2730 mm (basic machine) Weight: 22,500 kg (basic machine) EQUIPMENT - Standard - Adjustment device with programmable hold-down device - Foot switch for closing clamps - Ball tables - 2 good parts containers - Chip container - Transport and assembly device - FocusLine - NitroLine - FastLine - FlyLine - PlasmaLine - Additional Xp and Yp axes - Ejection cylinder for laser parts - Liftable laser cutting support - LensLine - High-frequency excitation - Cooling unit - Laser control TASC 4 - Electro-hydraulic punching head - Tool length compensation - Adjustable hold-down force - Spray lubrication punch - Bulge detection - Level monitoring Thread forming and tool lubrication - Laser cutting head with 170 mm focal length - Universal cutting head quick-change device, UTI with bus connection - ControlLine - USB interface and RJ45 network connection - CE marking - Dual-beam light barriers - Protection against stray radiation - Compact dust extraction system Cjlrgju Rbg Eei Eqjrb EQUIPMENT - extended - TruFlow 4000 including LensLine - Active die - Spray lubrication die - MultiTool function - Thread forming function - Marking function - Engraving function - Rolling technology function - Adaptive stroke calibration - StripLine - Repositioning cylinder - Vibration-damped installation - Chip conveyor with container - Table extension - Special thin sheet machining - Brush tables - Blow-out device for small parts AUTOMATION SheetMaster 2500 x 1250 mm - Suction cup frame with 36 suction cups (y-axis = 400 mm) - Movable suction cup bars (v-axis = 120 mm) - Peeling suction cups - Suction cup plate module - Vacuum sensor system - Central lubrication - Sheet thickness gauge for double sheet control - Automatic clamp closing SheetMaster Loading and unloading parallel to production time Peeling system Unloading monitoring GripMaster 2500 x 1250 mm - Residual skeleton grippers with sensors - Residual skeleton pallet can be tilted ToolMaster with 40 stations Main time parallel set-up Trolley systems (2500 x 1250 mm on rails) Loading/unloading double trolley incl. storage interface Including 1 set of set-up cassettes with die plates (21 pieces)

Condition: new, AVAILABLE FROM STOCK The Swing VII is Penta Laser's entry-level model. With Penta Laser, we offer fiber lasers that can compete with European competitors at a fraction of the price. It is therefore ideal for the critical entrepreneur who has a medium to high production requirement. In addition, Penta Laser distinguishes itself by working with key European components which gives it a unique position in the Fiber Laser market. - Laser Power: 12,000 W Qedlcbf - Laser Wave Length: 1020 nm - 1080 nm Crjlou E Uccjrgi Eqeb - X-axis range: 3000 mm - Range Y-axis: 1500 mm - Max. Acceleration plate cutting: 1.5 G - Maximum simultaneous axis speed: 140 m/min - Positioning accuracy: ± 0.03 mm/m - Repeating accuracy: ± 0.02 mm/m - Working voltage: 400V / 50Hz ± 5% - Cutting gases: Oxygen, Compressed air, Nitrogen - Cutting table: 3000×1500 mm - Machine weight: ± 6,500Kg - Equipped with shuttle table - Max. weight of plate per shuttle table: 1050 Kg ===== In addition, the machine is equipped with the following options: - Control: Smart Manager (Italian CNC control) - Pull-out drawers for collecting small parts - Aviation aluminum beam - 12,000 watt Max Photonics EU Laser source - Cutting head: Precitec - Closed top and full machine enclosure - Proportional pressure control for Oxygen (low pressure), Nitrogen (high pressure), and Air (high pressure with reducer for low pressure) - Water cooler - Power stabilizer - Automatic lubrication unit

Condition: new, Year of construction: 2024, Complete set double use laser machine ( 3 and 6 Kw in stock ) sheet metal 3015 ( 3 x 1,5 meter ) Tube 15 to 240 mm diameter tube length 6,3 meters include necessary options for a perfect laser line. Crolrgiou Ngzfj Eqjb include 1 filter installation ( cutting air can leave in factory ) include anty fire box. include Vacuum lift for sheet metalplate 800 kg load. no cable unit work on battery in vacuum unit. include 1 compressor for 16 BAR it give posibility to cut steel without gas. for quick cutting and SST steel it save lot of air and can increase the cutting feed consummeble for long time cust free cutting time. include vacuume lifter from 800 Kg lifter work on battery in lifter box so with loading machine no cables around you special for save working arear. all in one price. installation, training by professional service team on request

Condition: excellent (used), operating hours: 58,000 h, Functionality: fully functional, laser power: 5,000 W, TRUMPF Trumatic L 3050 - 5 kw TECHNICAL DATA: Make TRUMPF Type Trumatic L 3050 - 5 kw Year of manufacture 2005 Working area 3,000 x 1500 x 115 mm Control Siemens Sinumerik 840 D Laser power 5,000 watts Max. Sheet thickness Mild steel 25 mm Max. Sheet thickness stainless steel 20 mm Max. Sheet thickness aluminum 12 mm Operating hours approx. 58,000 h STANDARD EQUIPMENT: - Closed machine frame with integrated laser unit - Laser unit: TLF 5000 CO2 laser, high-frequency excited, cooling unit, logbook function - Automatic pallet changer - Longitudinal conveyor belt for small parts/waste - Drives: Gantry drive in combination with linear direct drives - Laser power control - HI-LAS high-pressure cutting - Plasma sensor system PMS - Fast processing with SprintLas - ContourLas for the production of small holes - Programmable power cycles - Microweld - Programmable cutting gas pressure setting - Laser cutting head with 5" lens and laser cutting head with 7.5" lens - Quick-change cutting head device - Automatic sheet outer edge detection - Capacitive height control (DIAS) - Process Control System (PCS) - Position laser diode - Automatic focus position adjustment AutoLas Plus - Automatic switch-off - Work area lighting - SIN 840D control system: Open control system on PC basis, simple operation, online help, diagnostic functions, maintenance logbook, technology data, teleservice Crolorgaw Hjrgi Eqeb - Workshop programming ToPs 100 lite - Safety: Multi-beam light barriers, beam guidance fully encapsulated and ventilated with nitrogen ventilated, monitoring system, multi-chamber extraction system and compact dust extractor, safety cabin - Network connection: BNC/RJ-45 network connection - Electrical equipment for three-phase current 400 V / 50 Hz - Paintwork: textured paint white RAL 9002 / gentian blue RAL 5010 EXTENDED EQUIPMENT: - Additional laser cutting head with 9-inch lens - NEW transmitter tubes on delivery

Condition: good (used), CHILLER WATER COOLER Cjlrgsu Uvpmji Eqsrb

Condition: new, Year of construction: 2025, BODOR laser cutting systems in top quality at top prices. -Simple programming- with service and training, assembly and commissioning. -Machines with 3Kw to 30 Kw power Easy to operate and suitable for beginners as well as established companies. Crelrgisfbg Hbo Eqjb

Condition: excellent (used), Year of construction: 2024, operating hours: 300 h, Functionality: fully functional, machine/vehicle number: 4302024, laser power: 30,000 W, laser hours: 10 h, sheet thickness aluminum (max.): 50 mm, sheet thickness steel (max.): 60 mm, sheet thickness copper (max.): 15 mm, sheet thickness brass (max.): 25 mm, total length: 3,000 mm, total width: 1,500 mm, workpiece weight (max.): 1,000 kg, positioning accuracy: 0.1 mm, Equipment: cooling unit, ▪ Production Set ▪ Preparing machine for automation ▪ Additional Pulpit ▪ EagleEye ▪ Container for scrap under pallet changer ▪ MYEMIX PRO ▪ EAGLE ANC 36 ▪ MYECOCUT ▪ MYEBOOST ▪ MYESPOT Cslrgiovqbguo Eqjrb ▪ MYECAT ▪ MYEDROP

Condition: new, Year of construction: 2024, AVAILABLE FROM STOCK The Swing VII is Penta Laser's entry-level model. With Penta Laser, we offer fiber lasers that can compete with European competitors at a fraction of the price. It is therefore ideal for the critical entrepreneur who has a medium to high production requirement. In addition, Penta Laser distinguishes itself by working with key European components which gives it a unique position in the Fiber Laser market. - Laser Power: 8,000 W Qedlcbf - Laser Wave Length: 1020 nm - 1080 nm - X-axis range: 3000 mm - Range Y-axis: 1500 mm - Max. Acceleration plate cutting: 1.5 G - Maximum simultaneous axis speed: 140 m/min - Positioning accuracy: ± 0.03 mm/m - Repeating accuracy: ± 0.02 mm/m - Working voltage: 400V / 50Hz ± 5% - Cutting gases: Oxygen, Compressed air, Nitrogen - Cutting table: 3000×1500 mm - Machine weight: ± 2,500Kg - Equipped with shuttle table - Max. weight of plate per shuttle table: 1050 Kg ===== In addition, the machine is equipped with the following options: - Control: Smart Manager (Italian CNC control) - Pull-out drawers for collecting small parts - Aviation aluminum beam - 8,000 watt Max Photonics EU Laser source - Cutting head: Precitec - Closed top and full machine enclosure - Proportional pressure control for Oxygen (low pressure), Nitrogen (high pressure), and Air (high pressure with reducer for low pressure) - Water cooler - Power stabilizer Colrgisu E T N Uo Eqjrb - Automatic lubrication unit

Condition: good (used), Year of construction: 2012, The Prima Power Platino FIBER is in good condition, one owner, always serviced on time by Prima Power service representatives. For sale complete with storage. All documentation, service reports are included. Recently serviced with a full annual service. Laser cutting machine is connected, available for inspection, testing, in Ukmergė. Specification: Model. Serial No.: 776 E 308 Year of manufacture: 2012 Made in: Italia Power: Working area (X x Y): Weight: Laser working hours: 61484 Cuts up to: 5 mm Cjlrjqi D Sqjgi Eqjrb Location: Ukmergė Available for testing: Yes If you have any further questions, we will be happy to answer them.

Condition: good (used), Year of construction: 2006, Functionality: fully functional, laser power: 4,000 W, AVAILABLE AT SHORT NOTICE: TRUMPF Trumatic L 3030 - 4 kw - Year 2006 TECHNICAL DATA: Make: TRUMPF Type: L 3030 - 4 kw Year of manufacture: 2006 Working area: 3,000 x 1,500 x 115 mm Control: Siemens Sinumerik 840 D Laser power: 4,000 watts Max. Sheet thickness mild steel: 20 mm Max. Sheet thickness stainless steel: 15 mm Max. Sheet thickness aluminum: 10 mm Operating hours: NC Machine regularly serviced by TRUMPF! Transmitter tube: new 2024 TASC laser control: new 2022 Driver stage: replaced 2018 Magnetic bearing electronics: new 2016 STANDARD EQUIPMENT: - Closed machine frame with integrated laser unit Laser unit: TLF 2000 high-frequency excited CO2 laser, maintenance-free turboradial blower, mirror telescope, cooling unit, logbook function - Automatic pallet changer - Longitudinal conveyor belt for small parts/waste - Drives: maintenance-free three-phase servomotors - Cutting head quick-change device - Laser cutting head with 5" lens and laser cutting head with 7.5" lens - Programmable cutting gas pressure setting - APC capacitive height control and process control - AutoLas Plus automatic focus position adjustment Colrgjuthz Tei Eqjrb - Laser power control - Position laser diode - HI-LAS high-pressure cutting - Fast processing with SprintLas - ContourLas for the production of small holes - PMS plasma sensor technology - Automatic sheet edge detection - Programmable power cycles - Microweld - Automatic switch-off - Work area lighting - Sinumerik 840D control system: open control system on PC basis, simple operation, online help, integrated e-shop, diagnostic functions, maintenance logbook, technology data, teleservice - Workshop programming ToPs 100 lite - Safety: multi-beam light barriers, beam guidance fully encapsulated and ventilated, monitoring system, multi-chamber extraction and compact dust extractor, protective cabin - 3.5" floppy disk drive - TFT color screen - Electrical equipment: Voltage 400 V / 50 Hz - Paint finish: Standard RAL 9002/5010 EXTENDED EQUIPMENT: - TLF 4000 laser incl. lens monitoring sensors - PCS Process Control System

Condition: used, Trump Ultrafilter LP 0072 Colrgiethc Sqs Eqsrb Water cooler Heat exchanger 3 pieces in stock

Condition: used, Year of construction: 2015, operating hours: 45,545 h, Functionality: fully functional, machine/vehicle number: A1350G0017, laser power: 6,000 W, laser hours: 23,519 h, total length: 8,000 mm, total width: 2,500 mm, Trumpf TruLaser 8000 The laser is a TruFlow 6000 Large machine 26mx7m Space required Year of construction: 2015 Regular service by Trumpf itself. For more pictures please ask Machine is in the inflow Machine is located in England Therefore EXW England 1 x Trumpf TruLaser 8000 8000 x 2500mm Crelrgou Rrm Nei Eqob 6000w TruFlow / Single head technology Year: 2015 Discover the Trumpf TruLaser 8000 - the powerful solution for your laser cutting requirements! With its outstanding precision and speed, this machine is perfect for processing sheet metal and metal. The TruLaser 8000 combines innovative technology with a user-friendly interface, allowing you to realize complex cutting patterns efficiently and economically. Benefit from the outstanding cutting quality and the minimization of post-processing work. Thanks to its robust design and advanced automation technology, the TruLaser 8000 is the ideal choice for companies that place the highest demands on their production processes. Increase your productivity and quality - choose the Trumpf TruLaser 8000!

Condition: excellent (used), Year of construction: 2011, operating hours: 13,378 h, Functionality: fully functional, laser power: 3,200 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, space requirement width: 7,600 mm, space requirement length: 6,500 mm, year of last overhaul: 2023, Used Trumpf CO2 laser, working area 3000 x 1500 mm, X - axis 3000 mm, Y - axis 1500 mm, Z - axis 115 mm, two cutting heads various spare parts, Laser TruFlow 3200 3,2 KW, suction system, control Sinumerik 840 D sl, table is manually pulled out of the machine for loading and unloading, laser beam on time 3149 hours, laser on time 13378 hours, few operating hours. Maintenance contract next maintenance May 2024. 2 x Tru Tops software license can be purchased separately. Subject to changes and errors in technical data and prices. Subject to prior sale. Colrgijri S Dzj Eqerb Our general terms and conditions apply, which you can view on our homepage.

Condition: new, Year of construction: 2024, AVAILABLE FROM STOCK The Swing VII is Penta Laser's entry-level model. With Penta Laser, we offer fiber lasers that can compete with European competitors at a fraction of the price. Thus, ideal for the discerning entrepreneur who has a medium to high production requirement. In addition, Penta Laser distinguishes itself by working with key European components which gives it a unique position in the Fiber Laser market. - Laser Power: 6,000 W - Laser Wave Length: 1020 nm - 1080 nm - X-axis range: 3000 mm - Range Y-axis: 1500 mm - Max. Acceleration plate cutting: 1.5 G - Maximum simultaneous axis speed: 140 m/min - Positioning accuracy: ± 0.03 mm/m - Repeating accuracy: ± 0.02 mm/m Creleu E T Hgsrgi Eqob - Working voltage: 400V / 50Hz ± 5% - Cutting gases: Oxygen, Compressed air, Nitrogen - Cutting table: 3000×1500 mm - Machine weight: ± 2,500Kg - Equipped with shuttle table - Max. weight of plate per shuttle table: 1050 Kg ===== In addition, the machine is equipped with the following options: - Control: Smart Manager (Italian CNC control) - Pull-out drawers for collecting small parts - Aviation aluminum beam - 6,000 watt Max Photonics EU Laser source - Cutting head: Precitec - Closed top and full machine enclosure - Proportional pressure control for Oxygen (low pressure), Nitrogen (high pressure), and Air (high pressure with reducer for low pressure) - Water cooler - Power stabilizer - Automatic lubrication unit

Condition: new, Year of construction: 2024, Functionality: fully functional, This machine convinces with a top price-performance ratio and CE standard. You will be surprised. DNE laser cutting machines for professional use in industry and trade. We offer you an absolute top product in terms of reliability and cutting performance tailored to your needs. Our German service team ensures smooth installation and commissioning of the laser cutting system as well as subsequent training. We also carry out service and maintenance work. You can also contact us if you are looking for financing. You are welcome to convince yourself of the statements made during a visit and demonstration. A 45-degree laser cutting head is also available for processing welding bevels or countersinks. The laser cutting machines are available in the following processing sizes: Sheet metal nominal dimension X 3000 mm x1500 mm, 4000 mm x 2000mm, 6000 mm x 2000mm, 6000 mm x 2500mm. Cjloq U A H Aorgi Eqsrb Laser power from 2000 watts to 15,000 watts is available.

Condition: excellent (used), Year of construction: 2001, operating hours: 39,500 h, Functionality: fully functional, laser power: 4,000 W, sheet thickness aluminum (max.): 10 mm, sheet thickness steel (max.): 20 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, TRUMPF Trumatic L 3030 - 4 kw - Year 2001 TECHNICAL DATA: Make: TRUMPF Type: L 3030 - 4 kw Year of manufacture: 2001 Working area: 3,000 x 1,500 x 115 mm Control: Siemens Sinumerik 840 D Laser power: 4,000 watts Max. Sheet thickness mild steel: 20 mm Max. Sheet thickness stainless steel: 15 mm Max. Sheet thickness aluminum: 10 mm Operating hours: NC one 39,500 h (10.08.2024) Machine regularly serviced by TRUMPF! STANDARD EQUIPMENT: - Closed machine frame with integrated laser unit Laser unit: TLF 2000 high-frequency excited CO2 laser, maintenance-free turboradial blower, mirror telescope, cooling unit, logbook function - Automatic pallet changer - Longitudinal conveyor belt for small parts/waste - Drives: maintenance-free three-phase servomotors - Cutting head quick-change device - Laser cutting head with 5" lens and laser cutting head with 7.5" lens - Programmable cutting gas pressure setting - DIAS 3 height control and process control - AutoLas Plus automatic focus position adjustment - Laser power control - Position laser diode - HI-LAS high-pressure cutting - Fast processing with SprintLas - ContourLas for the production of small holes - PMS plasma sensor technology - Automatic sheet edge detection - Programmable power cycles - Microweld - Automatic switch-off - Work area lighting - Sinumerik 840D control system: open control system on PC basis, simple operation, online help, diagnostic functions, maintenance logbook, technology data, teleservice Crjleulqrlsrgi Eqjb - Safety: multi-beam light barriers, beam guidance fully encapsulated and ventilated, monitoring system, multi-chamber extraction and compact dust extractor, protective cabin - 3.5" floppy disk drive - TFT color screen - Electrical equipment: Voltage 400 V / 50 Hz - Paint finish: Standard RAL 9002/5010 EXTENDED EQUIPMENT: - TLF 4000 laser incl. lens monitoring sensors

Condition: new, Year of construction: 2023, Laser power: 6000W/12000W/20000W Applicable Material: metal Condition: New Laser Type: Fiber Laser Cutting Area: 3000*1500mm Cutting Speed: 200m/min Celrgieg Du Aqo Eqerb Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT Cooling Mode: WATER COOLING Certification: CCC, CE, GS, ISO, Sgs Laser Source Brand: IPG/MAX Weight (KG): 11000KG Warranty: 3 years Power supply: 110V/220V/380V 50Hz/60Hz 1. Flagship Series Super dynamic responding, easily handle complex patterns of sheets. 2. Automatic Edge-finding With the capability of identifying irregular sheets, the edge searching time is decreased to 3 seconds. 3. Automated Nozzle Changer The machine changes its nozzle within 35 seconds at the fastest speed - this saves 50% of time costs.

Condition: like new (used), Year of construction: 2019, AMADA - LCG3015AJ - 2019 as good as new - control system: AMADA - fiber laser 2100 W - table size: 3000 x 1500 mm ( x 2 ) - operating time: 300 hours - documents Crelrgsiv S Nqei Eqob - weight: 9400 kg - under power Due to high office costs (customs regulations) we do not deliver to Turkey Turkey, Iran, Russia and Belarus.

Condition: new, Year of construction: 2022, PFO 3D-2 HAL Highest productivity - Highly dynamic and highly accurate 3D scanner with lightweight mirrors, with which applications up to 8000 W can be realized - Incl. documentation, transport packaging and spare parts catalog Numerous interfaces - For robot communication in "on-the-fly" operation Sensor recording for quality monitoring - Process monitoring (e.g. connection of photodiodes, camera or pyrometer) is possible on the PFO TruControl 1000 control system incl. PFO software Crslrgiett Eb De Eqeb - Optimum synchronization between laser and processing optics - For simple control and operation of the laser device and the PFO either via a control panel or an external PC - 24x digital I/O interface, expandable with fieldbus interfaces such as ProfiBus, DeviceNet and many more - Storage option for 199 laser programs Maximum process reliability - Integrated crossjet for maximum protective glass service life - Highest repeatability of process results thanks to minimization of the metal vapour effect (MDE) by special nozzle Vision Line Basic - Digital camera image with crosshairs in the laser focus for observation of the workpiece and teaching - With scanner optics, the effect of chromatic aberration is minimized aberration is corrected for all positions in the processing field - Integrated algorithm for simple calibration - Convenient touchscreen operation - Still image / live image - Saving of images TruTops PFO - Offline software for 3D programming - Network connection to TruControl - Enables the programming of different wobble methods wobble methods

Year of construction: 2006, Condition: ready for operation (used), -USED- CO2 LASER CUTTING MACHINE WITH PALLET CHANGER X-AXIS TRAVEL: 3150 mm Y-AXIS TRAVEL: 4070 mm Crelrgi Esg Au Sfoqob Z-AXIS TRAVEL: 280 mm WORKING AREA: 8000 x 3000 mm ADMITTED LOAD ON TABLE: 4800 Kg SOURCE: FANUC C4000 E ; 4000 W CONTROL UNIT: FANUC 160 iLB OVERALL DIMENSIONS: 22000 x 8700 x 2500 mm

Condition: good (used), Year of construction: 2010, laser power: 4,000 W, Trumpf 5 axis laser machine, Year of manufacture 2010, Siemens control, travel X/Y 4000/1500 mm, 1 burning head, laser power 4 KW, Laser On 47950 hours, beam on 6200 hours, ADC cutting head 155 mm, Cjlrgisvbdy Eo Eqerb Positioning laser diode, Teach panel, power cycles, Trumpf remote connection, Machine weight approx. 19,000 kg,

Condition: excellent (used), Year of construction: 2007, operating hours: 32,400 h, Functionality: fully functional, laser power: 6,000 W, TRUMPF TruLaser 5030 - 5 kw Classic TECHNICAL DATA: Make TRUMPF Type TruLaser 5030 - 5 kw Classic Year of manufacture 2007 Working area 3,000 x 1,500 x 115 mm Control Siemens Sinumerik 840 D Laser power 6,000 watts Max. Sheet thickness Mild steel 25 mm Max. Sheet thickness stainless steel 25 mm Max. Sheet thickness aluminum 15 mm Operating hours 32,400 h STANDARD EQUIPMENT: - Closed machine frame with integrated laser unit - Laser unit: TruFlow 5000 CO2 laser, high-frequency excited, maintenance-free turbo radial blower, cooling unit, logbook function - Automatic pallet changer - Longitudinal conveyor belt for small parts/waste Crolorfrf Sjrgi Eqsb - Drives: Gantry drive in combination with linear direct drives - Cutting head quick-change device - PlasmaLine - Fast processing with SprintLas in all sheet thicknesses - ContourLine for the production of small holes - Programmable power cycles - Microweld - Programmable cutting gas pressure setting - Laser cutting head with 5" lens and laser cutting head with 7.5" lens - Automatic sheet outer edge detection - ControlLine capacitive height control and process control - Position laser diode - Automatic focus position adjustment FocusLine - Automatic nozzle cleaning - PierceLine - NitroLine High-pressure cutting - Laser power control - Automatic switch-off - Work area lighting - SIN 840D control system: Open control system on PC basis, simple operation, online help, diagnostic functions, maintenance logbook, technology data, teleservice - Workshop programming - Safety: Multi-beam light barriers, beam guidance fully encapsulated and ventilated with nitrogen ventilated, monitoring system, multi-chamber extraction system and compact dust extractor, safety cabin - Network connection: RJ-45 network connection via teleservice installation - 3.5" floppy disk drive - TFT color screen - Electrical equipment for three-phase current 400 V / 50 Hz - Paint finish: textured paint white RAL 9002 / gentian blue RAL 5010 EXTENDED EQUIPMENT: - More powerful TruFlow 6000 laser - Additional laser cutting head with 3.75-inch lens - Additional laser cutting head with 10-inch lens

Condition: new, Cross conveyor belt Wave-Belt TruLaser New Cjlju S Nuqjrgi Eqorb