Used Hydraulic presses double column / Four column presses for sale (311)

Condition: new, Year of construction: 2024, The P50MR motorized hydraulic press guarantees high performance and maximum execution precision thanks to the robust structure entirely cut by laser without welding in the points of greatest stress. They are equipped with a 400 [V] 50-60 [Hz] submersible motor control unit, a fast approach and return pump calibrated to 20 [bar] plus an adjustable pressure pump with handwheel to obtain the required power. They are also equipped with a pressure relief valve with mechanical block to prevent overpressure and the pressure gauge (standard) allows to calibrate with extreme precision the power delivered. Power Ton 50 Inside light shoulders mm 800 Approach speed mm/min 1800 Working speed mm/min 350 Rapid flow rate l/min 26 Be Ia Ujfvhqgenxiewl Flow rate in slow l/min 5 Cylinder stroke mm 300 Cylinder bore mm 135 Stem diameter mm 70 Shank diameter mm M30 Tank capacity 50 litres Max. pressure bar 350 Voltage V400 Frequency Hz 50-60 Engine power kW 3 Max. current consumption A 5.5 Weight kg 500 Dimensions 1550 x 800 x 1965 (h)

Condition: used, Bending capacity: Ø45 mm Bending angle: 0 - 180° Revolver-adjustment: 8-fold adjustable angles Mandrellength: 4000 mm Bs Ioq Nipyoa Unxiewl Sets of bendingdies: 1x Ø 16 mm 2x Ø 17 mm 3x Ø 20 mm 2x Ø 27 mm 1x Ø 28 mm 2x Ø 30 mm Featured with: - 4 Mandrels - Mandrel retraction unit Country of origin: Germany Motor power: 3 kW Machine LxWxH: 400 x 100 x 120 cm Machine weight: 1500 kg

Condition: used, Double column hydraulic press HYDRAP type HPDB 250 make no. 5189 year of construction 1984 pressure force 250 ton. stand width 1350 mm column width lateral 500 mm ram stroke 500 mm table area 1300 x 1000 mm ram area 1300 x 1000 mm Installation height max. 710 mm Table height above floor 850 mm Oil tank capacity 800 liters Engine power main pumps 2x 22 kW motor power control and auxiliary pumps 7,5 / 2,2 / 1,5 kW Mains connection 400 Volt, 50 Hz, 55 kW - light curtain, light barrier SICK - 4x mechanical depth stop with electric adjustment on the 4 butt corners - cutting impact damping on the 4 impact corners - UVV VGB 7.n.5.2 (for manual insertion work) - Machine documents and circuit diagrams available Bj Isdzqrdea Unxiowl - Working platform screwed all around approx. 50 cm to the machine head - Electrical cabinet adjacent (120 x 40 cm) width without pedestal approx. 2700 mm Depth at machine base approx. 1900 mm Depth with hydraulic tank approx. 2350 mm Machine height without hoses 3920 mm Width with pedestal and railing 3500 mm Depth with platform and railing 3050 mm Height at railing 3800 mm Height machine complete 4200 mm weight approx. 25 ton. Very good condition

Condition: ready for operation (used), total height: 3,500 mm, total length: 2,125 mm, operating speed: 7 mm/s, retraction speed: 150 mm/s, controller model: CNC, power: 47 kW (63.90 HP), load capacity: 400,000 kg, total depth: 2,370 mm, Hot press for manufacturing grinding wheels max temperature: 350° C Capacity: 400 ton Max ram adjustment: 500 mm Table area: 700 x 700 mm Length: 2125 mm Depth: 2370 mm Height: 3500 mm Options fitted to this press: high temperature(350° C) heating rod individual monitoring 4-zone control CNC control baffle plate for lower heating plate light button on the upper heating plate automatic preheating via 2 piece tool temperature sensors 2 pieces wear plates for heating plate above and below special version control cabinet Bws Iaov Tam Ee Unxiel protective grille in special design rotary table with integrated ejector in and out rails for tool carrier plate with automatic lowering Max ram adjustment: 500 mm Drawning speed: 150 mm/sec Table area: 700 x 700 mm

Condition: reconditioned (used), Year of construction: 1986, Functionality: fully functional, press power: max. 630 to. daylight: max. 375 mm Bws Ia Unxsgwv S Ueisl stroke: max. 275 mm weight: 4.500 Kg.

Condition: new, The KP-A series consists of powerful hydraulic presses with portal frames, which are built completely in Europe using high-quality components from reputable suppliers and used for deep drawing, forming, and notching processes. The possible force ranges from 40 to 400 tons. The entire series has large ram plates on the cylinder and work table with clamping flutes for mounting tools and accessories. Mobile 2-hand operation guarantees safety, and the travel distance is defined with adjustable limit switches. We also offer customized solutions that are based on individual customer requirements. Be Iaou Hf Nie Unxiowl

Year of construction: 1985, Condition: like new (used), Wanzke hydraulic high speed press SP/F12 double column press. -WKG 499- Offered here is a hydraulic high-speed press from the company Wanzke. This press is in mint condition! There are 2 presses on one stand. Technical data: Manufacturer: Wanzke Type: SP/F 12 Pressing force: 120 KN Retracting force: 17,8 overrun time: 0,028 sec year of construction: 1985 Main drive: 1,5kW / 1,5kW Mains voltage: 380V 50Hz Control voltage: 220V 50Hz Overtravel: 2,8mm safety distance: 4mm Strokes/min: Working stroke: 10mm/sec. rapid traverse: 20mm/sec Max.stroke: 100mm Bws Ishgiwnja Unxisl Table area: 320 x 300 x 280mm Accessories: Double decoiler type GMD1 Digital function control "Tronic press" with full upgradeability to CNC control. There are 2 pieces in total!

Condition: good (used), Year of construction: 1987, Pressing force 630 t Bwj Ia Unoqvmqrexisl Plunger stroke 1000 mm Pressing area 2000 x 1000 mm Dimensions L x W x H approx. 3000 x 1300 x 5000 (without tank and piping) mm Weight approx. 23,000 kg Siegfried Volz Machine Tools Rüschebrinkstr. 151 - 153 DE - 44143 Dortmund - Wambel

Condition: used, Double-column hydraulic press SCHÖN Type UTE/B 50 Machine No. 5509, Year of manufacture 1971 Pressure capacity 50 tons Column width 550 mm Column side clearance 150 mm Table surface 480 x 380 mm Table opening Ø 70 mm Ram surface 490 x 280 mm Clamping pin bore Ø 40 mm Max. ram stroke 150 mm Max. installation height 390 mm Table height above floor 890 mm Rapid forward speed approx. 130 mm/sec. Working speed approx. 20 mm/sec. Return speed approx. 130 mm/sec. Motor power: 4 kW Power supply: 380 volts, 50 Hz - Continuous press force adjustment - Rapid stroke and working stroke - Pressure- or stroke-dependent stroke limitation - Adjustable pressure hold time, press time extension 0.5-6 seconds - Mechanically adjustable fixed stop via handwheel on the ram - SICK light barrier, type LVU - Stroke counter - Double column guide on the ram Bwo Ia Unov Srfwexiol Space requirement: L x W x H: 1100 mm x 1050 mm x 2320 mm Weight: approx. 1.5 tons Good condition

Condition: ready for operation (used), total height: 5,500 mm, total length: 1,500 mm, passage width: 1,000 mm, power: 55 kW (74.78 HP), load capacity: 1,000,000 kg, net weight: 25,000 kg, total depth: 1,500 mm, 4 column hydraulic press high closing speed ideal for composite projects press can remain under pressure for a long period of time one main hydraulic single acting piston (diameter 660 mm) two smaller pistons to retract the stamp heating can used as an option (on/off) is installed on top of ground! hole in table for counterpressure (stroke 200 mm) Rexroth hydraulic unit 300 bar operating pressure Max ram adjustment: 800 mm Bwe Ia Unxsv Sfp Neijl Distance between table -- ram: 1400 mm Table area: 1200 x 1000 mm

Condition: ready for operation (used), Year of construction: 2000, operating hours: 32,769 h, Functionality: fully functional, machine/vehicle number: H/7529, pressing force: 500 t, table width: 2,400 mm, table length: 1,300 mm, working stroke: 800 mm, TECHNICAL DETAILS Press force: 500 t Table area: 2,400 x 1,300 mm Pedal area: 2,400 x 1,300 mm Stroke: 800 mm Max. stroke length: 830 mm Control system: Siemens S7-400 Installation height: 400 mm/min Working speed: 25 - 60 mm/s Closing speed: 500 mm/s Rapid traverse up: 450 mm/s Mold base area: min. 1,400 x 900 mm Mold base area: max. 2,300 x 1,200 mm Mold weight: max. 3,000 kg MACHINE DETAILS Weight: 83,000 kg Power: 255 kW Rated current: 435 A Bwe Ia Unxewa S R Ijiol Voltage: 400 V Frequency: 50 Hz Hydraulic pressure: 255 bar Oil volume: 3700 l

Condition: excellent (used), Double effect hydraulic press, 60 ton, 900x800 mm plate, 1000 mm stroke, computerized CNC for pressure, speed and stroke control. Bj Iewcd U Roa Unxijwl

Condition: used, Functionality: fully functional, machine/vehicle number: 71737, total width: 640 mm, total length: 1,575 mm, total height: 1,970 mm, overall weight: 645 kg, input voltage: 3,000 V, pressing force: 40 t, pressing speed: 5 mm/s, The hydraulic two-column assembly and pressing press with a force of 40t OKS 1671M is designed for straightening parts, pressing in and out of sleeves, bushings, bearings, gears, as well as other pressing works during the repair of tractors, cars and agricultural machinery. The press can be used for cutting, bending, drawing and other operations. Maximum force, kN (tf) – 392(40) Maximum working pressure in the hydraulic system, MPa (kgf/cm2) – 20(200) Piston stroke, mm – 250 Piston speed during the working stroke, mm/s – 5 Maximum distance between the table and the piston, mm – 1000 Maximum table travel, mm – 750 Bs Iaowbz Ire Unxiewl Dimensions of clearances between the posts, mm: from front to back – 250 from left to right – 1000 Dimensions of the table support plates, mm – 400х450 Working fluid – industrial oil I20A GOST 20799-75 Pump type – eccentric three-plunger Feed, l/min – 5 Nominal speed, rpm – 1500 Power consumption, kW – 3 Overall dimensions, mm – 1575х640х1970 Weight, kg – 645

Condition: used, Manufactured by: Exner Type: EX 100 SB Table size: 780 x 700 mm Bs Iaev S Uxgs Unxiewl Maximum press force: 100 t

Condition: used, Double-column hydraulic press RASTER ZEULENRODA (WALTER) Type WUP-S 60 Mach. No. 707, built in 1994 Pressure capacity 60 tons Column width 1090 mm Side clearance 275 mm Ram surface 890 x 540 mm Table surface 990 x 540 mm Max. ram stroke 300 mm Installation height 390 mm Table height above floor 900 mm Hydraulic operating pressure 250 bar Bwe Ia Unev Srfdoxiol Rapid downward speed 47 mm/s Rapid upward speed 75 mm/s Working speed 15 mm/s Return speed 37 mm/s Motor power 15 kW (2 x 7.5 kW) Power supply 400 volts, 50 Hz, 15.85 kW - SICK light barrier, type LVS 600 - Manually adjustable limit switch cams for stroke limitation - Press force adjustment via handwheel - Continuous press force holding time adjustment - Two-hand operation on the machine - Additional ram plate Guided by two lateral guide rods, Ø 50 mm - Table top with 18 mm T-slots, slot spacing 185 mm - Table top through hole Ø 100 with insert reduction to Ø 30 mm - Ram plate with 40 mm bore and clamping screw - Electrical cabinet on the side of the machine stand - 3 monitored safety valves for the hydraulic system - Accident prevention regulations for manual insertion work - Electrical circuit diagram Space requirement L x W x H 1900 x 1350 x 2570 mm Weight 3.1 tons Good condition

Condition: ready for operation (used), 6-kolomspers met 4 hydraulische zuigers opwaartse slag diameter van de zuiger: 450 mm slag: 550 mm Maximale kracht van 2000 ton max opening zonder verwarmde tafels: 780 mm max opening met verwarmde tafels: 655 mm Verwarmde tafels met stoom of olie Maximale temperatuur: 300° C Totale oppervlakte: 2000 x 2000 mm Twee tafels van 2000 x 1000 mm (kunnen samen of apart gebruikt worden) 2x 11 kW hydraulisch vermogen met invoerroltafel: 4260 x 1550 x 1250 mm Olietank op platform: 2000 x 2000 x 2500 mm Totale hoogte van de pers: 3600 mm De pers zit 920 mm in de grond Werkhoogte is 750 mm Toepassingen: - composietmateriaal - vulkaniseren - buigen / strekken Bws Ia Ujv Rwftenxisl

Condition: like new (used), Year of construction: 2024, pressing force: 300 t, Hydraulic 300 T double-column press, 850 x 650 mm Tonnage: 300 T Clearance between columns: 950 mm Cylinder stroke: 450 mm Max. distance between table and ram: 600 mm Table height from floor: 1,000 mm Total height: approx. 3,300 mm Width: approx. 2,020 mm Depth: approx. 1,250 mm Weight: approx. 7,000 kg Bs Iaewarzyj Unxijwl Double-speed hydraulic power unit Power: 11 kW Approach speed: 13 mm/sec Working speed: 2.8 mm/sec Return speed: 19 mm/sec Two-hand operation Ram return by pressing the blue button Travel limitation by adjustable sensors Lower fixed table with T-slots, 850 x 650 mm 650 mm Tamper with T-slots, as X, size 750 x 600 mm CE certificate and user manual: Included

Condition: new, Year of construction: 2025, H FRAME DOUBLE ACTING HYDRAULIC PRESS MODEL HDD / 1200 TON Ram Cylinder Capacity (Ton) 1200 Ton Min. Working Pressure (Bar) 30 Bar Max. Working Pressure (Bar) 250 Bar Main Cylinder Diameter Ø 540 mm * 2 Pcs Auxilary Cylinder Diameter Ø135*85 mm * 2 Pcs Table size (mm) 2200 x 2200 mm Stroke (mm) 1000mm Daylight (mm) 1200mm Advance Speed (mm/sec) 130 mm/sec Return Speed (mm/sec) 110 mm/sec Working Speed (mm/sec) 4-9 mm/sec Cushion Capacity (Ton) 600 Ton Cushion Stroke (mm) 400 clay Ejector force (Ton) 10 Ton Ejector stroke (mm) 300 mm Bwe Iewbtn Rja Unxijl Motor (KW) 75 KW Pump (CC) 200 CC Overall dimension (LxWxH) 4500 x 5000 x 8000 mm Weight (Kg) Approx. 115,000 KGS

Condition: as good as new (ex-display), Metal band saw demonstration unit MBS210FH with gentle hydraulics, automatic cut shutdown, electric coolant system, quick-release vice, base, CE, 169kg; symbol photo Bj Ia Unjvrvupjxiowl Prices subject to change, errors, printing and typesetting errors reserved

Condition: excellent (used), Year of construction: 2015, Functionality: fully functional, total height: 3,550 mm, total width: 2,260 mm, pressing force: 80 t, table width: 2,100 mm, table length: 840 mm, table height above floor: 1,200 mm, overall weight: 12,000 kg, EXNER PG 80 Tool Test Press Year of manufacture: 2015 Number of press cylinders: 2 Nominal force (adjustable) 2 x 400 kN Retraction force 2 x 150 kN Ram stroke 350 mm Ram width: 2100 mm Ram depth: 840 mm Installation height: 550 mm Table width: 2100 mm Table depth: 840 mm Table clearance 1300 x 125 mm Front column clearance 1700 mm Side column clearance 600 mm Table height above floor 1200 mm Ram speed at load up to 100% approx. 0-10 mm/s Ram return speed approx. 0-20 mm/s - Electronic roller feed unit EV 22 AK included Belt width: max. 220 mm Belt cross-section: max. 200 mm² Feed length: 0.1 x 19,999 mm Speed: max. 120 m/min Roller opening: max. 4 mm Accuracy: +/- 0.05 mm Roller diameter: 38.2 mm The system is equipped with a Zehnder Sommer feeder. This is mounted on the left side and can be moved backwards from the side area. Bo Iov U T R Tea Unxijwl Appropriate safety devices for automatic continuous operation are provided.

Condition: excellent (used), Year of construction: 1968, Functionality: fully functional, pressing force: 630 t, table width: 2,000 mm, table length: 1,600 mm, overall weight: 90,000 kg, ram stroke: 900 mm, working height: 1,600 mm, Equipment: safety light barrier, Becker & van Hüllen_35_10335_630T press Bo Ia Uev Hpmbenxijwl A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2023. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Becker & van Hüllen_35_10335_630T press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2023. New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: excellent (used), Year of construction: 1980, Functionality: fully functional, pressing force: 1,250 t, table width: 1,000 mm, table length: 900 mm, overall weight: 80,000 kg, ram stroke: 450 mm, working height: 900 mm, Equipment: safety light barrier, Muller Weingarten POZ 1250-9.2.1 press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2021. New Simatic S7 control system and new electrical cabinet. Be Ia Unxev E Rkfjiswl Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Muller Weingarten POZ 1250-9.2.1 press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2021. New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: excellent (used), Year of construction: 1981, Functionality: fully functional, pressing force: 1,250 t, table width: 1,270 mm, table length: 1,250 mm, overall weight: 70,000 kg, ram stroke: 270 mm, working height: 630 mm, Equipment: safety light barrier, Dieffenbacher P0-F 1250A press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2016. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Dieffenbacher P0-F 1250A press Bo Iaev E Rihj Unxijwl A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2016. New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: excellent (used), Year of construction: 1990, Functionality: fully functional, pressing force: 1,000 t, table width: 2,200 mm, table length: 1,600 mm, overall weight: 140,000 kg, ram stroke: 1,300 mm, working height: 2,050 mm, Equipment: safety light barrier, Hydrap Pressen HPDZB1000 press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2021. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Hydrap Pressen HPDZB1000 press A press in very good technical condition for sale from a liquidated stamping shop in Poland Bwe Iov Eydnsa Unxisl Modernized in 2021. New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: excellent (used), Year of construction: 1994, Functionality: fully functional, pressing force: 200 t, table width: 1,600 mm, table length: 1,400 mm, ram stroke: 400 mm, working height: 730 mm, Equipment: safety light barrier, Müller Weingarten press line: KE 200-16/14.3.1 - 200 tons KE 300-16/14.2.1 - 300 tons KE 200-16/14.4.1 - 200 tons KE 200-16/14.5.1 - 200 tons The presses have a common housing and fan system. The remaining elements are independent, which will allow you to work on the presses individually. Also, each press is controlled individually Press in very good technical condition for sale from a liquidated press in Poland Modernized in 2018-2023. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Bws Iov Hqnaoa Unxiol Possibility to check the machine in operation - The press is still connected to the power supply. Müller Weingarten press line KE 200-16/14.3.1 - 200 tons KE 300-16/14.2.1 - 300 tons KE 200-16/14.4.1 - 200 tons KE 200-16/14.5.1 - 200 tons The presses have a common covers and fan system. The rest of elements are independent, which allows for individual work on the presses. Also, the control of each press is individual A presses in very good technical condition for sale from a liquidated stamping shop in Poland Modernizes during 2018 -2023 New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.