Used injection molding machines with a clamping force of 5000 - 9999 kN for sale (86)

Condition: good (used), Year of construction: 2011, Injection Moulding Machine Krauss Maffei KM 850-12000 MX Krauss Maffei LRX 500 Robot Year of Manufacture: 2011 Ijdpfew Rdlqex Af Sjbf Machine Description: Hydraulic-mechanical two-platen clamping system with 4 pressure pads and 4 locking units on the moving platen. PV-controlled injection unit. MC 5 control system with color monitor, integrated control panel, and USB data storage. Plasticizing Unit: Complete plasticizing system for thermoplastics with a 135 mm diameter screw, shut-off nozzle, and open nozzle. Nozzle radius: 25 mm, nozzle opening: 9 mm Technical Specifications: Clamping Unit: Clamping force: 8,500 kN Mold opening force: 560 kN Platen size (H x V): 1600 x 1600 mm Tie bar spacing (H x V): 1140 x 1140 mm Mold opening stroke: 1600 mm Mold height (min–max): 500 – 1100 mm Daylight opening: 2100 mm Ejector stroke: 300 mm Ejector force: 200 / 100 kN Injection Unit: Screw diameter: 135 mm Injection pressure: 1389 bar Injection volume: 8588 cm³ Shot weight (PS): 6098 g Injection rate: 1414 cm³/s Electro-Hydraulic Equipment: Pump motor power: 132 kW Dry cycle time (Euromap 6): 965 cycles/h Oil tank capacity: 2440 l Dimensions and Weight: Net weight with control cabinet: 49 t Footprint (L x W x H): 11.72 x 2.92 x 2.71 m

Condition: used, Year of construction: 2005, Technical details: Ibjdstunccepfx Af Ssf screw size: 90 mm injection shot weight in Polysterol: 1.758 g/PS closing pressure: 6500 kN weight of the machine ca.: 32 t Out of serial production *

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 864 3 0066, clamping force: 8,000 kN, screw diameter: 95 mm, clearance between the columns: 1,120 mm, displacement volume: 2,801 cm³, injection pressure: 1,832 bar, injection weight: 2,011 g, mold height (min.): 500 mm, ejector force: 138,000 N, ejector stroke: 350 mm, opening stroke: 1,030 mm, plate length: 1,620 mm, plate width: 1,500 mm, total length: 10,600 mm, total width: 2,700 mm, total height: 2,700 mm, overall weight: 33,500 kg, heating capacity: 42.6 kW (57.92 HP), pressure: 190 bar, pump power: 412,000 W, power: 149 kW (202.58 HP), input frequency: 50 Hz, input voltage: 400 V, input current: 329 A, Equipment: documentation/manual, Model: 800/1120–5200 Machine: Demag Ergotech System Type: Injection moulding machine Year of manufacture: 2005 Clamping force: 8000 kN Isdoxa D Uvjpfx Af Sobf Locking force: 8800 kN Opening stroke: 1030 mm Mould height min./max.: 500 / 1050 mm Platen size (H × V): 1620 × 1500 mm Clear tie bar spacing: 1120 × 1000 mm Max. mould weight: 10,800 kg Ejector stroke: 350 mm Ejector force: 138 kN Ejector retraction force: 58 kN Screw diameter (average): 95 mm Shot volume: 2801 cm³ Injection pressure: 1832 bar Shot weight (PS): 2011 g Installed barrel heating: 42.6 kW Electric screw drive: 51 kW Oil tank capacity: 1300 l Pump output: 412 l/min Pump unit: 133 kW Installed total power: 133–149 kW Pressure: 190 bar Net weight (without oil fill): 33,500 kg Overall dimensions (L × W × H): 10.6 × 2.7 × 2.7 m Total weight clamping/injection unit: 7500 kg Continuous sound pressure level: 70 dB(A) Connection: 3 × 400 V, 50 Hz, 329 A

Condition: new, Year of construction: 2025, Injection Moulding Machine – Krauss Maffei KM 651-6100 GX Year of manufacture: 2025 Hydraulic-mechanical, two-platen clamping system with four pressure pads on the fixed platen and four locking units on the moving platen. PV – injection unit pressure regulation. MC6 control system based on an industrial PC using real-time Ethernet technology, equipped with an integrated 21.5” operator panel with a color touchscreen display. Plasticizing unit Complete plasticizing unit for thermoplastics, screw diameter 95 mm, with non-return valve and open nozzle Nozzle radius: 25 mm Nozzle opening: 9 mm Technical data (standard version) Clamping unit Clamping force: 6500 kN Opening force: 455 kN Platen dimensions (H x V): 1660 x 1530 mm Tie bar spacing (H x V): 1200 x 1020 mm Clamping stroke: 1450 mm Mould height (min.–max.): 450 – 1000 mm Daylight: 1900 mm Ejector stroke: 300 mm Ejector force forward/reverse: 140 / 70 kN Injection unit Screw diameter: 95 mm L/D ratio: 23.0 Injection pressure: 1795 bar Injection volume: 3367 cm³ Shot weight (PS): 2391 g Isdpfx Afexdd U Dj Sobf Injection speed: 110 mm/s Injection flow rate: 780 cm³/s Screw speed (standard): 147 rpm Plasticizing capacity (standard screw speed): 102 g/s Nozzle contact force: 166 kN Electro-hydraulic system Pump motor power: 97 kW Installed heater power: 54 kW Number of cylinder heating zones: 7 Dry cycle time (Euromap 6): 3.3 s / 840 mm Dry cycle time (KM standard): 2.9 s / 600 mm Oil tank capacity: 1435 liters Linear robot – Krauss-Maffei LRX 250 Payload capacity < 25 kg (gripper + drives + parts) Part removal on the operator-offside Axes: X axis (from mould): 900 mm, servo motor Y axis (vertical, telescopic, with motor brake): 1000/1000 mm, servo motor Z axis (transversal): 2500 mm, servo motor Dimensions and weight Net weight (incl. control cabinet): 38.5 t Machine dimensions (L x W x H): 10.19 x 3.03 x 2.51 m

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, clamping force: 6,500 kN, screw diameter: 70 mm, Clamping unit: Clamping force 6500 kN Mould opening force, max. 346 kN Travel force movable platen opening 169 kN Travel force movable platen closing 144 kN Size of mould platens (h x v) 1520 x 1470 mm Distance between tie bars (h x v) 1000 x 930 mm Mould opening stroke 1150 mm Mould height min 675 mm Max. daylight 1825 mm Hydraulic ejector - stroke 135 mm Ejector force 226 kN Injection unit: Screw diameter 70 mm Ls/D ratio 23 Injection pressure 2389 bar Stroke volume 1097 ccm Shot weight (PS) 998 gr. Injection rate 393 ccm/s Screw speed 218 1/min Plasticising rate max. 83 g/s Nozzle pressure 173 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 75 kW Installed heating capacity 36 kW Adjustable barrel heating zones 7 Iodsv Stbmepfx Af Sjbf Dimensions and weights: Dimensions of the machine ca. 8,70 x 2,90 x 2,80 m Total machine weight 44000 kg Accessories: - Anti vibration pads Additional options: - 1 x air valve - 8 x pneumatic sequentional valves - Accumulator - 2 x hydr. core pulls on movable plate - 2 x hydr. core pulls on fix plate - Robot interface according to EUROMAP 67

Condition: reconditioned (used), Year of construction: 2004, Krauss-Maffei KM 650-3500 C 1 650 tons Krauss-Maffei injection moulding machine from 2004 with 45.000 working hours in automatic-cycle. Machine will be delivered full checked tested and reconditioned by our team. Equipment: 6 neum. cscade, 24 hot runner zones, 1 core in fix platen, 1 core in moving platen, electrical screw-drive. Ask us for the start up service with warranty of working condition. Technical details CLAMPING FORCE 6.500 kN PLATEN SIZE 1.540 x 1.440 mm DISTANCE BETWEEN TIE BARS (h x v) 1.110 x 960 mm TRAVEL OPENING 1.150 mm DAYLIGHT MAX 1.750 mm SCREW DIAMETER 90 mm MIN. MOULD HIGHT 600 mm YEAR OF BUILDING 2004 INJECTION VOLUMEN 1.953 cm3 SHOTWEIGHT 1.777 grms INJECTION PRESSURE 1.742 bar Ibjdpfehy Nnbex Af Ssf This machine will be delivered complete checked, repaired and tested at our workshop and can be shown under power !

Condition: excellent (used), Year of construction: 2019, Clamping force: 900 t Screw diameter: 90 mm Shot weight: 1576 g Distance between tie bars V: 1000 mm Distance between tie bars H: 1180 mm Shot volume: 1732 cm3 Ibjdpfjv D U Hnox Af Ssf Type: Horizontal Drive: Hydraulic

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036721, clamping force: 6,500 kN, screw diameter: 70 mm, clearance between the columns: 1,110 mm, displacement volume: 1,078 cm³, injection pressure: 1,877 bar, injection weight: 981 g, opening stroke: 3,200 mm, plate height: 1,540 mm, drive type: Hydraulisch, clear span: 3,200 mm, tool weight: 2,200,000 g, Injection Moulding Machines Directly from the Manufacturer! As the manufacturer KraussMaffei, we offer you our certified and flexible stock machines: The hydromechanical two-platen clamping unit of the GXW machine sets new standards in terms of quality and productivity. With the sophisticated GuideX sliding shoe, forces are ideally absorbed and the service life of the moulds is extended. The innovative GearX locking system engages instantly and reliably. Powerful, user-friendly and value-retaining. TECHNICAL DATA: Iodpfx Afow U N Ixe Sjbf KM 650 / 2000 / 2000 GXW G06 (Order 38618339) CONTROL SYSTEM - MC 6 with 24'' TFT color screen with multitouch functions CLAMPING UNIT - Clamping force: 6500 kN - Max. mould opening force: 455 kN - Daylight opening (h x v): 1110 x 960 mm - Platen size (h x v): 1540 x 1440 mm - Mould installation height min. - max.: 1550 mm (without centre platen) - Opening stroke: 3200 mm - Max. mould opening distance: 1650 mm - Max. mould weight: 22,000 kg INJECTION UNIT 1 SP2000 - Screw diameter / type: 60 mm / thermoplastics - Effective L/D ratio: 23.3 - Injection pressure: 2420 bar - Shot volume: 792 cm³ - Shot weight at max. stroke for PS: 720 g - Injection speed: 140 mm/s - Injection throughput: 396 cm³/s - Screw drive speed: 285 rpm - Plasticizing throughput: 72.2 g/s - Nozzle contact force: 82 kN INJECTION UNIT 2 SP2000 - Screw diameter / type: 70 mm / thermoplastics - Effective L/D ratio: 20 - Injection pressure: 1877 bar - Shot volume: 1078 cm³ - Shot weight at max. stroke for PS: 981 g - Injection speed: 140 mm/s - Injection throughput: 539 cm³/s - Screw drive speed: 285 rpm - Plasticizing throughput: 98.3 g/s - Nozzle contact force: 82 kN ELECTRICAL PARAMETERS - Connected load: 341 kW - Power supply: 400 V / 50 Hz, 3 phases with neutral conductor WEIGHT & DIMENSIONS - Net weight: 43.5 t - L x W x H: 11.89 x 3.22 x 2.77 m ADDITIONAL EQUIPMENT - Wear-resistant plasticizing unit - BluePower full insulation for plasticizing cylinder - Open nozzle - BluePower ServoDrive - Pneumatic valve: 1-fold (BWAP), 1-fold (FWAP) - Pneumatic cascade valves: 6-fold (BWAP), 6-fold (FWAP) - Hydraulic core pull: 2-fold (BWAP), 2-fold (FWAP) - Mould heating: 96 zones (3.5 kW each) - Euromap interface for handling: E18 - Euromap central computer interfaces: E67, E77, E78, E63, E82.1 - Adaptive Process Control (APC+) - Graphic analysis package - Sliding table with turning unit, servo-driven - Vertical centre platen - Parallel clamping & opening during injection process with bar parallelism control between FWAP and centre platen or BWAP and centre platen - ColorForm interface signal interface for connecting an RPM unit - Electrical interface for HRS-Flexflow system - Electrical interface and hydraulic valves for "1-K dummy operation" - Interface for connecting a CoMo-Kistler Injection Basic System with good/bad part separation The machine is located at our plant in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your enquiry.

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: X66932, clamping force: 6,600 kN, screw diameter: 98 mm, Used Stork IMM 6600-8650R injection molding machine. Ijdpfxewhncio Af Ssbf The machine still needs to be tested and repaired.

Condition: new, Year of construction: 2025, Injection Molding Machine – Krauss Maffei KM 500-4300 GX Year of manufacture: 2025 Hydraulic-mechanical, two-platen clamping system with four pressure pads on the fixed platen and four locking units on the moving platen. PV – injection unit control. MC6 control system based on an industrial computer using real-time Ethernet technology, equipped with an integrated 21.5” operator panel with a color touchscreen display. Plasticizing Unit Complete plasticizing unit for thermoplastics, screw diameter 90 mm, with non-return valve and open nozzle. Nozzle radius: 15 mm Nozzle opening: 6 mm Technical data (standard version) Clamping Unit Clamping force: 5,000 kN Opening force: 350 kN Platen dimensions (H x V): 1430 x 1350 mm Tie bar spacing (H x V): 1040 x 910 mm Opening stroke: 1350 mm Mold height (min.–max.): 400–950 mm Daylight: 1750 mm Ejector stroke: 250 mm Ejector force forward/backward: 95 / 49 kN Injection Unit Screw diameter: 90 mm L/D ratio: 20.0 Isdjxdd S Nepfx Af Sebf Injection pressure: 1,839 bar Shot volume: 2,290 cm³ Shot weight (PS): 2,084 g Injection speed: 100 mm/s Injection flow rate: 636 cm³/s Screw speed (standard): 195 rpm Plasticizing capacity (at standard screw speed): 134 g/s Nozzle contact force: 129 kN Electro-hydraulic system Pump motor power: 90 kW Installed heater power: 44 kW Number of barrel heating zones: 7 Dry cycle time (according to Euromap 6): 2.8 s / 728 mm Dry cycle time (according to KM standard): 2.5 s / 520 mm Hydraulic oil quantity: 1,180 l Linear Robot – Krauss-Maffei LRX 250 Payload < 25 kg (gripper + drives + parts) Parts placement on the operator-opposite side Axes: X-axis (from mold): 900 mm, servomotor Y-axis (vertical, telescopic, with motor brake): 1000/1000 mm, servomotor Z-axis (crosswise): 2,500 mm, servomotor Dimensions and weight Net weight (with control cabinet): 25.0 t Machine dimensions (L x W x H): 8.08 x 2.80 x 2.39 m

Condition: ready for operation (used), Year of construction: 1997, Stock-No. 13602 Manufacturer Krauss Maffei Type of machine KM 650 – 8000 CM Year 1997 Working hours 80000 h Controlversion MC 3-F Screentext German Location Eschweiler - Germany Clamping unit: Clamping force 6500 kN Mould opening force, max. 346 kN Travel force movable platen opening 169 kN Travel force movable platen closing 144 kN Size of mould platens (h x v) 1704 x 1700 mm Distance between tie bars (h x v) 930 x 930 mm Mould opening stroke 1150 mm Mould height min 600 mm Max. daylight 1750 mm Hydraulic ejector - stroke 250 mm Ejector force 226 kN Injection unit: Screw diameter 130 mm Ls/D ratio 20 Injection pressure 1296 bar Stroke volume 6172 ccm Shot weight (PS) 5617 gr. Injection rate 1540 ccm/s Screw speed 138 1/min Plasticising rate max. 238 g/s Nozzle pressure 246 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 132 kW Installed heating capacity 70 kW Adjustable barrel heating zones 7 Dimensions and weights: Dimensions of the machine ca. 12,00 x 2,80 x 2,70 m Total machine weight 43000 kg Ibsdpfjub S R Hox Af Ssf Accessories: - Anti vibration pads Additional Options: - 1 x air valve - 2 x core pulls on movable plate - 2 x core pulls on fix plate - 8 x hotrunner controller - Robot interface according to Euromap 67

Condition: excellent (used), Year of construction: 1999, Technical Data: Clamping Unit: Maximum clamping force: 8,000 kN Mold opening force: 503 kN Opening stroke: 1,400 mm CNC control Mounting plate (H x V): 1,600 x 1,510 mm Clear space (H x V): 1,120 x 1,000 mm Maximum mold opening stroke: 1,400 mm Minimum mold installation height: 600 mm Maximum mold installation height: 1,100 mm Max daylight: 2,000 mm Ejector stroke: 250 mm Ejector force: 226 / 95 kN Injection Unit: Calculated shot volume: 3,611 ccm Screw diameter: 105 mm Specific injection pressure: 1,580 bar Shot weight (PS): 3,286 g Oil volume: 2,000 l Machine dimensions (L x W x H): approx. 10,150 x 2,660 x 2,400 mm Ibodpfxew Idnts Af Sef Weight: approx. 12.5 t Accessories: Number of core pulls: 4 Each with 8 water circuits The seller is not liable for typographical or data transmission errors. The machine's condition in appearance, technology, and wear corresponds to its age; used machines are sold without any warranty.

Condition: good (used), Year of construction: 2004, ENGEL DUO 4550/700 – Technical Specification General Information: Machine designation: DUO 4550/700 Controll : CC100 Clamping Unit: Clamping force: 7000 kN Opening force (with pressure pads): 510 kN Opening stroke: 1350 mm Minimum mould height: 450 mm Maximum mould height: 1350 mm Daylight (platens open): 2700 mm Platen dimensions (H × V): 1460 × 1360 mm Tie bar distance (H × V): 1030 × 930 mm Max. mould weight: 9000 kg Ejector stroke: 300 mm Ejector force: 90 kN Ejector strokes (Euromap 6): 8 Dry cycle time (Euromap 6): 7.0 seconds Injection Unit: Screw diameter: 90 mm L/D ratio (barrier): 24 Plasticizing rate: 2488 cm³/s Shot volume: 2860 cm³ Shot weight (theoretical): 2600 g Injection flow rate: 533 cm³/s Injection pressure: 1910 bar Ibodov U Dn Nopfx Af Ssf Specific injection pressure: 2100 bar Nozzle length: 185 mm Nozzle contact force: 65 kN Heater capacity (zone 7): 62 kW Pump drive power: 75 kW Oil capacity: 1000 liters Weight: Net weight of clamping unit: 22 tons Net weight of injection unit: 10 tons Cores: 2+2 Linear Robot Engel ERC

Condition: ready for operation (used), Year of construction: 2001, Used injection molding machine directly from the manufacturer! We as manufacturer KraussMaffei offer here one of our used injection molding machines. CONTROL - MC4 TECHNICAL DATA CLAMPING UNIT - injection force: kN 8000 - distance between columns (h x v): mm 1120 x 1000 - distance of mold opening max: mm 1400 - mold installation height min/max: mm 600/1100 - opening stroke of the clamping platen: mm 2000 - Ejector stroke: mm 250 - Ejector force: kN 226 ( Backward: 59 ) SCREW UNIT - Screw diameter: mm 95 - Ratio Ls/D: 23 Iedpfxsnh Rwge Af Sjbf - Injection pressure: bar 1795 - Injection volume: cm3 3367 - Injection size for PS: g 3064 - Injection capacity: cm3/s 690 - Closing force of the nozzle: kN 166 ELECTRICAL PARAMETERS - capacity of pump motor: kW 90 - heating power: kW 61 WEIGHT AND DIMENSIONS - net weight: t 45 - dimensions of the machine (L x W x H): m 10,4 x 2,86 x 2,39 Basically, we deliver this machine in a functioning basic condition. In addition, we as the manufacturer of these systems can offer various add-ons depending on the individual case, such as: - Possible control updates to extend the lifetime of the plant - Updates for energy optimization of the machine - Possible connection to digital products from KraussMaffei - Plasticizing conversions - Optional: Organization and arranging of delivery (Not included in the price) - Optional: Installation and commissioning (not included in the price) You will receive from us first-class service as well as the possibility to purchase immediately desired spare parts packages of wear parts in order to ensure a continuous production of your new used machine. Do not hesitate and ask us right away!

Condition: reconditioned (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: X66924, clamping force: 6,600 kN, screw diameter: 115 mm, Used Stork IMM 6600EP-8650 injection molding machine. The machine has been overhauled, tested and repaired. Isdpfx Afowhk Iue Sebf

Condition: like new (used), Year of construction: 2005, Injection moulding machine ENGEL CL 2550/550 Year of manufacture - 2005 Name of the robot-"ENGEL ERC53/1-F" Closing force [tons]- 550 Maximum distance between plates [mm]-1650 Min. mold height [mm]-310 Max. mold height [mm]-800 Column spacing (mm)-915x860 Size of mounting plates (mm)-1345x1280 Ibsdpfxsq Nybgo Af Sef Ejector stroke (max) [mm]-250 Auger diameter [mm]-80 Injection weight [g]-1800 Oil quantity [liter]-1000 Injection sequence into the mold -2 Machine with robot ready to work Number of hydraulic cores S/R- 1/1

Condition: ready for operation (used), Year of construction: 2006, operating hours: 77,000 h, functionality: fully functional, clamping force: 5,000 kN, screw diameter: 100 mm, Clamping force 5000 kN Mould opening force, max. 280 kN Travel force movable platen opening 137 kN Travel force movable platen closing 136 kN Size of mould platens (h x v) 1270 x 1200 mm Distance between tie bars (h x v) 900 x 800 mm Mould opening stroke 1170 mm Mould height min 480 mm Max. daylight 1650 mm Hydraulic ejector - stroke 250 mm Ejector force 95/48 kN Injection unit: Screw diameter 100 mm Ls/D ratio 18 Injection pressure 1411 bar Ibodpfx Afswgni Hs Sjf Stroke volume 2411 ccm Shot weight (PS) 2194 gr. Injection rate 801 ccm/s Screw speed 189 1/min Plasticising rate max. 161 g/s Nozzle pressure 173 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 90 kW Installed heating capacity 44 kW Adjustable barrel heating zones 7 Oil Reservoir capacity 1075 ltr. Dimensions and weights: Dimensions of the machine ca. 7,50 x 2,50 x 2,50 m Total machine weight 27090 kg Max. mould weight 7900 kg Accessories: - Anti vibration pads - 2 x 8 fold water flow regulator Additional Options: - 2 x hydr. core pull on movable plate - 2 x hydr. core pull on fix plate - Robot interface according to Euromap 12 - 16 x hotrunner controller - 1 x air valve on movable plate

Condition: reconditioned (used), Year of construction: 2002, Used injection molding machine directly from the manufacturer! We as manufacturer KraussMaffei offer here one of our used injection molding machines. CONTROL - MC4 TECHNICAL DATA CLAMPING UNIT - injection force: kN 5000 - distance between columns (h x v): mm 900 x 800 - distance of mold opening max: mm 1170 - mold installation height min: mm 480 - opening stroke of the clamping platen: mm 1650 - Ejector stroke: mm 250 - Ejector force: kN 95 ( Backward: 48 ) Ibsdjnh Rnuopfx Af Sjf SCREW UNIT - Screw diameter: mm 90 - Ratio Ls/D: 20 - Injection pressure: bar 1742 - Injection volume: cm3 1953 - Injection size for PS: g 1777 - Injection capacity: cm3/s 649 - Closing force of the nozzle: kN 115 ELECTRICAL PARAMETERS - capacity of pump motor: kW 90 - heating power: kW 44 WEIGHT AND DIMENSIONS - net weight: t 25,8 - dimensions of the machine (L x W x H): m 7,65 x 2,33 x 2,55 Basically, we deliver this machine in a functioning basic condition. In addition, we as the manufacturer of these systems can offer various add-ons depending on the individual case, such as: - Updates for energy optimization of the machine - Possible connection to digital products from KraussMaffei - Plasticizing conversions - Optional: Organization and arranging of delivery (Not included in the price) - Optional: Installation and commissioning (not included in the price) You will receive from us first-class service as well as the possibility to purchase immediately desired spare parts packages of wear parts in order to ensure a continuous production of your new used machine. Do not hesitate and ask us right away!

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: X82600, clamping force: 12,000 kN, screw diameter: 150 mm, Used Stork IMM 12000-19000 injection molding machine. Ijdpewhkfyjfx Af Ssbf

Condition: excellent (used), Year of construction: 2011, Krauss Maffei KM 850-12000 MX injection molding machine Year of production - 2011 LRX 500 robot Isdpowqdyiefx Af Ssbf Z axis 4000 mm X axis 1500 mm Y axis 1250/1250 mm Hydraulic-mechanical two-plate closing system with 4 pressure cushions and 4 locking units on the moving plate. PV - injection unit regulation. MC 5 control system with color monitor, integrated control panel and USB data carrier. Plasticizing system Complete plasticizing system for thermoplastics with screw diameter 135 mm, with check valve and open nozzle Nozzle radius 25 mm, nozzle opening 9 mm TECHNICAL DATA Closing unit - mold closing force: kN 8500 - mold opening force: kN 560 - dimensions of the mounting plate (h x v): mm 1600 x 1600 - clearance between columns (h x v): mm 1140 x 1140 - mold opening path: mm 1600 - mold height (min-max.): mm 500 - 1100 - opening width: mm 2100 - ejector stroke: mm 300 - ejector force: kN 200/ 100 Injection unit - screw diameter: mm 135 - pressure injection: bar 1389 - injection volume: cm3 8588 - injection weight for PS: g 6098 - injection efficiency: cm3/s 1414 Electro-hydraulic equipment - rated power of the pump motor: kW 132 - dry cycle time according to Euromap 6: 1/h 965 - oil tank capacity: l 2440 Weight and dimensions - net weight with control cabinet: t 49 - dimensions of the place for installation (length x width x height): m 11.72 x 2.92 x 2.71

Condition: reconditioned (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 504212, clamping force: 5,000 kN, screw diameter: 90 mm, clearance between the columns: 900 mm, injection pressure: 1,742 bar, installation height: 480 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping Unit Clamping force: 5,000 kN Tie bar distance (h x v): 900 x 800 mm Maximum mold opening distance: 1,170 mm Ijdew Dy Rwjpfx Af Sjbf Minimum mold installation height: 480 mm Platen opening stroke: 1,650 mm Ejector stroke: 250 mm Ejector force: 95 kN Reverse ejector force: 48 kN Injection Unit Screw diameter: 90 mm L/D ratio: 20 Injection pressure: 1,742 bar Injection volume: 1,953 cm³ Shot weight (PS): 1,777 g Injection rate: 649 cm³/s Nozzle contact force: 115 kN MACHINE DETAILS Electrical Data Pump drive power: 90 kW Heating capacity: 44 kW Operating voltage: 400 V Frequency: 50 Hz Total rated current: 306 A Motor rated current: 170 A Operating voltage: 3 phases Dimensions & Weight Net weight: 25.8 t Machine dimensions (L x W x H): 7.65 x 2.33 x 2.55 m Note: Delivery, installation, and commissioning can be arranged upon request for an additional charge.

Condition: excellent (used), Year of construction: 2015, Krauss Maffei KM 900 – 8100 GX Injection Moulding Machine Year of manufacture: 2015 General description: Hydro-mechanical, two-platen clamping system with 4 pressure pads on the fixed platen and 4 adjustment units on the moving platen. The machine is equipped with a PV-type proportional valve injection unit adjustment system. Control is handled by the modern MC6 control system, based on an industrial PC with real-time Ethernet technology. The control panel features an integrated 19-inch touchscreen with a color display, LED backlighting, and visualization of all processes using ProcessDesigner. Plasticising unit: Complete unit for thermoplastics processing Wear-protected (abrasion-resistant) version Screw diameter: 105 mm Check valve and open nozzle Technical data: Clamping unit: Isdpfswyxbgex Af Ssbf Clamping force: 9,000 kN Mould opening force (pressure pads): 630 kN Platen size (W x H): 1,660 x 1,530 mm Tie bar spacing: 1,180 x 1,000 mm Max. mould opening stroke: 1,600 mm Mould height (min – max): 500 – 1,100 mm Maximum opening stroke: 2,100 mm Ejector stroke: 300 mm Ejector force (forward / return): 140 / 70 kN Injection unit: Screw diameter: 105 mm L/D ratio: 23.0 Injection pressure: 1,778 bar Injection volume: 4,546 cm³ Shot weight (PS): 3,228 g Injection rate: 805 cm³/s Screw speed (standard): 150 rpm Nozzle contact force: 166 kN Electrical and hydraulic equipment: Pump motor rating: 120 kW Heater rating: 59 kW Number of barrel heating zones: 7 Dry cycle time / stroke (Euromap 6): 3.3 s / 826 mm Dry cycle time / stroke (KM standard): 2.9 s / 590 mm Oil tank capacity: 1,450 l Dimensions and weight: Net weight (with control cabinet): 40 t Machine dimensions (L x W x H): 10.72 x 3.03 x 2.51 m

Condition: excellent (used), Year of construction: 2006, Krauss Maffei KM 800 – 12000 MX injection molding machine Year of production - 2006 Closing system: - Mold closing force: kN 8000 - Mold opening force: kN 560 - Dimensions of the mounting plate (h x v): mm 1600 x 1530 - Clearance between columns (h x v): mm 1120 x 1000 - Mold opening path: mm 1600 Iodpfstmq Aksx Af Ssbf - Mold installation height (min - max): mm 500-1100 - Plate opening stroke: mm 2100 - Ejector stroke: mm 300 - Ejector force: kN 200/100 Injection system: - Screw diameter: mm 135 - Injection pressure: bar 1389 - Injection volume: cm3 8588 - Injection weight for PS: g 6098 - Number of screw revolutions, standard/option: rpm 121/153 - Injection efficiency (standard) Electric-hydraulic equipment - Nominal power of the pump motor: kW 110 - Installed power of heaters: kW 57 - Number of cylinder heating zones: - 7 - Number of dry cycles according to Euromap: 1/h 965 - Oil tank capacity: l 1500 Dimensions and weight - Net weight with control cabinet: t 45 - Machine dimensions (length x width x height): m 10.81 x 2.92 x 2.51

Condition: good (used), Year of construction: 2011, Krauss Maffei KM 850-12000 MX injection molding machine With Krauss Maffei robot Year of manufacture - 2011 Hydraulic-mechanical double-plate clamping system with 4 pressure pads and 4 locking units on the moving plate. PV - adjustment of the injection unit. MC 5 control system with color monitor, integrated control panel and USB data storage. Plasticizing system Complete plasticizing system for thermoplastics with a screw diameter of 135 mm, with reverse lock and open nozzle. Nozzle radius 25 mm, nozzle opening 9 mm TECHNICAL DATA Closing unit - mold closing force: kN 8500 - mold opening force: kN 560 - clamping plate dimensions (h x v): mm 1600 x 1600 - clearance between columns (h x v): mm 1140 x 1140 - mold opening path: mm 1600 - mold height (min-max.): mm 500 - 1100 - opening width: mm 2100 - ejector stroke: mm 300 - ejector force: kN 200/ 100 Ibjdetrya Ropfx Af Sof Injection unit - screw diameter: mm 135 - injection pressure: bar 1389 - injection volume: cm3 8588 - injection size for PS: g 6098 - injection capacity: cm3/s 1414 Electro-hydraulic equipment - rated power of pump motor: kW 132 - dry cycle time according to Euromap 6: 1/h 965 - oil tank capacity: l 2440 Weight and dimensions - net weight with control cabinet: t 49 - dimensions of foundation space (L x W x H): m 11.72 x 2.92 x 2.71

Condition: good (used), Year of construction: 1997, Krauss Maffei KM 650 - 3500 C2 injection molding machine Year of production - 1997 Fully hydraulic closing system. MC 3 control system SP 3500 plasticizing system complete plasticizing system for thermoplastics in the version with abrasion protection, with a screw diameter of 90 mm, with a non-return lock and an open nozzle. Closing system: complete plasticizing system for thermoplastics with a screw diameter of 90 mm, with a non-return lock and an open nozzle. TECHNICAL DATA: Closing unit: - Mold closing force: kN 6500 - Mold opening force: kN 346 - Mould mounting plate movement force -- opening kN 169 -- closing kN 144 - Mounting plate dimensions (h x v): mm 1490 x 1440 - Clearance between columns (h x v): mm 1000 x 930 - Mold opening stroke: mm 1150 - Minimum mold height: mm 600 - Opening width: mm 1750 - Ejector stroke: mm 250 - Ejector force: kN 226/285 Injection unit: - Screw diameter: mm 90 - Injection pressure: bar 1742 - Injection volume: cm3 1953 - Injection weight for PS: g 1777 - Injection capacity cm3/s 649 - Increased injection capacity - Ibodpfx Ajvlpcgof Ssf Electric-hydraulic equipment: - Nominal power of the pump motor: kW 90 - Power of installed heaters: kW 44 - Number of cylinder heating zones: 7 - Oil tank capacity: l 1240 Dimensions and weight: - Net weight with control cabinet: t 39.5 - Machine dimensions (length x width x height): m 9.36 x 2.65 x 2.44