Used Machining centers (horizontal) X-axis travel 600-799mm for sale (141)

Condition: good (used), Year of construction: 2009, machine/vehicle number: 18037, table width: 500 mm, table length: 500 mm, spindle speed (min.): 40 rpm, spindle speed (max.): 10,000 rpm, coolant supply: 70 bar, Year of construction 2009, last maintenance 2020 Fanuc control 30i Tool magazine for 400 tools Round pallet storage for 12 pallets 2 pallets 500mmx500mm included 10 additional pallets for 3000€/each Glass scale on X- and Z-axis (deactivated on Y-axis) Spindle up to 10,000 rpm, last spindle replacement July 2019 Spindle holder SK40 DIN 69871 Big+ Crelrgi Eoq D Arleqeb Spindle motor 36/24 kW Max. Torque 254 Nm up to 900 rpm Knoll coolant system Scraper belt chip conveyor 24 l / min at 70 bar, tank capacity 1300 liters

Year of construction: 2011, Condition: ready for operation (used), Horizontal machining center with 5-axis Fanuc CNC, tilting table with 120° and continuous B-axis. Pallet magazine with 10 stations, automatic tool changer with 199 stations. Accessories included with the machine: Chip conveyor, high pressure coolant system through the spindle line with separate tank and paper filter. Crsljku A A Hergi Eqjb

Condition: used, control Siemens 840D Number of axles 4 St. Crelrjqn A Rvogi Eqob 2 toll turrets 160 tool taper HSK 63 spindle turning speed range 24.000 U/min

Year of construction: 1981, Condition: used, Type: BMC 5B Manufacturer: Toshiba Year: 1981 Pallets: 2 pcs 500x500mm pallet changer Cslrsbhn Nmjgi Eqsrb Tools: 30 pieces in magazine BT50 Speed: 28 - 3150 1/min Travel: X=630mm y=500mm z=500mm table pitch: 1° table load: 800kg General: Machine is in a good condition technically o.k. optically i.O.

Condition: used, Year of construction: 2010, x-travel 730 mm y-travel 730 mm z-travel 730 mm control Matrix Nexus Mazatrol Main spindle: turning speed range - main spindle 35 - 18.000 min/-1 power capacity - milling spindle 35 / 26 kW tool taper ISO 40 DIN 69871A transmission ratio 2 pallet changer: numbers of pallets 6 (5+1) size of pallet 500 x 500 mm max. workpiece weight 700 kg max. workpiecediameter 800 mm max. workpiece height 1.000 mm change time of pallets 7 sec B-axis (table) 0,001 ° Tool-Presetter: number of toolpositions 160 pos. tool taper ISO 40 DIN 69871A max. tool diameter 95 mm max. tool-dia with free toolbox 150 mm max. tool length 420 mm max. tool weight 12 kg Cslreup H Dregi Eqsrb change-time tool to tool 2,7 / 3,2 sec feeds: rapid traverse 60 m/min feed speeds max. 60.000 mm/min total power requirement 78,5 kVA weight of the machine ca. 16,4 t dimensions of the machine ca. 7,5 x 3,5 x 3,0 m CNC - MachiningCenter Horizontal MAZAK - Nexus 5000 II - palletchanger 6(5+1) pos. - WITHOUT tools

Condition: good (used), Mori Seiki NHX 5000, Year of manufacture 2011 / Commissioning 2013, Control Mapps 2, Travel X/Y/Z 730/730/880 mm, Ww 60x, Cjlrgieua U Iro Eqjrb SK 40, Spindle speed up to 10,000 rpm, Pallet changer 2x, IKZ 70 bar, Knoll compact filter system, Table sensor tool control system, electric handwheel, Chip conveyor, 4 axis rotary table 0.001°, Processing time 7300, max. workpiece Ø 800 mm, max. workpiece weight 700 kg,

Condition: excellent (used), Year of construction: 2004, travel distance X-axis: 750 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 850 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, overall weight: 16,000 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 15,000 rpm, Equipment: documentation/manual, Subject to technical errors and prior sale Crslrgorg D Rlji Eqob

Condition: like new (used), Year of construction: 2011, operating hours: 7,200 h, CNC controller: M730BM MAPPSII Axes X-axis travel mm: 730 Y-axis travel mm: 730 Z-axis travel mm: 880 B-axis degrees: index 1° Distance spindle nose - table surface mm: 80 - 810 Feed rates m/min: 60 Rapid traverse m/min: 60 Worktable Number of pallets: 2 Table dimensions mm: 500x500 Maximum workpiece size (D x H) mm: ø800x1.000 Max. workpiece weight kg: 500 APC time s: 9 Spindle Spindle speed rpm: 10.000 Cooling Cooling through the Spindle Center bar: 50 Tank capacity: 700 Cjlrgioumn E Sj Eqorb Tool system Tool holder: SK-40 DIN 69871 Tool magazine slots: 60 Max. Tool Diameter With free neighboring places mm: ø170 With occupied neighboring places mm: ø70 Max. Tool Length mm: 550 Max tool weight kg: 12 Tool-to-tool time s: 0,9 Equipment Electronic Handwheel Chip conveyor Signal lamp High pressure pump Manuals Machine running times Under power: 29.390 Spindle Working: 7.190 Rated power kVA: 41 Basic machine dimensions / weight Length mm: 4.854 Width mm: 3.098 Height mm: 2.833 Weight kg: 11.100

Condition: used, Year of construction: 2010, Functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 640 mm, travel distance Z-axis: 760 mm, number of slots in tool magazine: 60, TECHNICAL DETAILS X-axis travel: 760 mm Y-axis travel: 640 mm Z-axis travel: 760 mm Clamping surface: 500 x 500 mm Crolrgevtpxwoi Eqob Control: FANUC Oi-MD Number of places in the tool changer: 60 MACHINE DETAILS Installation dimensions: 4.68 x 3.67 x 3.10 m Weight: 13 t

Condition: good (used), Year of construction: 1997, travel distance X-axis: 630 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 560 mm, 2 identical machines are available UNIPRO 90 control system IBN of the machines 1998 Machine has a fully-fledged 4th axis (rotary table) Offer on request Cslrgsuc Sgdsi Eqsrb

Condition: used, Year of construction: 1995, x-travel 600 mm y-travel 560 mm z-travel 560 mm Crslrgi Est Hw R Rjqob Control SIEMENS 840 C total power requirement 12 kW weight of the machine ca. 10000 kg dimensions of the machine ca. m

Condition: ready for operation (used), Year of construction: 2012, Functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 880 mm, workpiece weight (max.): 500 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 60, TECHNICAL DETAILS X-travel: 730 mm Y-travel: 730 mm Z-travel: 880 mm Colrgi Eevpryioqsrb Control: M 730 BM MAPPS IV Main spindle max. spindle speed: 12,000 rpm Drive power - milling spindle: 15 / 11 kW max. torque: 102 Nm Tool holder: SK 40 Distance from spindle center to table: 80 - 800 mm Distance from spindle nose to table center: 70 - 950 mm Pallet changer Number of pallets: 2 Pallet size: 500 x 500 mm max. workpiece weight: 500 kg max. workpiece diameter: 800 mm max. workpiece height: 1,100 mm Pallet changing time: 9.5 s Indexing time: 1.49 s B-axis (table): 1° Tool changer Number of tool positions: 60 slots Tool holder: SK 40 Max. tool diameter: 70 mm Max. tool diameter with free adjacent box: 170 mm Max. tool length: 550 mm Tool - tool change time: 0.9 s Feeds Rapid traverse: 60 m/min Max. feed rate: 60,000 mm/min Jog feed rate: 0 - 5,000 mm/min MACHINE DETAILS Total power requirement: 34 kVA Machine weight: approx. 11.1 t Space requirement: approx. 5.5 m x 3.0 m x 2.8 m EQUIPMENT - Documentation - Chip conveyor - Coolant system - Internal coolant supply (IF Knoll) - Tool changer - B-axis - Pallet changer - Oil mist separator - Tool breakage control (magazines) - Thread milling

Condition: good (used), Year of construction: 2005, Control: CNC control SIEMENS 840 D WORK AREA- Travel distance X-axis 650 mm Travel distance Y-axis 650 mm Travel Z axis 650 mm Number of NC axes 5 TABLE Rotability 360 ° - Positionability 0.001 ° - Rotation speed 30 / min Swivelability 210 ° - Positionability 0.001 ° - Rotation speed 10 / min WORKPIECE / HEAD spindle type Speed range of 45 / min Speed range up to 10000 / min Spindle diameter 80 mm tool holder Drive power (max.) 38 kW Spindal power (continuous) 25 kW Torque (max.) 132 Nm The following restrictions apply: Maximum permissible weight of the moment captured on the gripper tool. 1 000 Ncm Maximum allowable tool weight 12 daN quick tool change up to the tool weight of 3 daN Crelrgomt Erwsi Eqob axis drives Feed of 1 mm / min Feed rate up to 60000 mm / min Rapid speed 60000 mm / min TOOL MAGAZINE Number of tool positions 40 Tool diameter max. 70 mm - with free neighbor position 163 mm Tool length max. 300 mm Tool change time 3.2 s DIMENSIONS / WEIGHTS Total weight approx. 16000 kg HELLER double-spindle horizontal-BAZ with A axis and 2 x B axis Machine is equipped with minimum quantity lubrication. Machine is disassembled and stored.

Condition: excellent (used), Year of construction: 2006, Functionality: fully functional, Horizontal machining center Mazak PFH 5800 Year of manufacture 2006 Control Mazatrol PC Fusion CNC 640 M X 730 Y 730 Z 740 Spindle diameter 215 mm Internal coolant supply 70 bar Renishaw measuring probe Chip conveyor Tool magazine 160 places Palletech high-bay system 16 pallets + 2 loading stations Cjlrgovt Ayboi Eqsrb

Condition: good (used), Year of construction: 2000, operating hours: 10,000 h, Functionality: fully functional, travel distance X-axis: 680 mm, travel distance Y-axis: 680 mm, travel distance Z-axis: 680 mm, rapid traverse X-axis: 45 m/min, nominal power (apparent): 25 kVA, torque: 237 Nm, table width: 500 mm, spindle speed (min.): 12,000 rpm, number of slots in tool magazine: 60, Equipment: chip conveyor, Hitachi Seiki HS 500 horizontal machining center for sale by user due to conversion. Colrovnl Drjgi Eqerb The machine was only used for specific work (medical technology) and mainly machined aluminum and stainless steel. Considering its age, it is in very good condition with a cycle time of around 10,000 hours and 27,000 hours of operation. Sigma control (FanuC) 2 - pallets 500 x 500 mm, Technical data see PDF. Inspection under power is possible. Clamping devices are not included with the machine!

Year of construction: 2017, Condition: as good as new (ex-display), Functionality: fully functional, TECHNICAL DETAILS X-axis travel: 650 mm Y-axis travel: 650 mm Crslrgolk H U Rsi Eqeb Z-axis travel: 800 mm spindle speed: max. 0 - 17.000 rpm table size: 500 x 500 mm table load: max. 800 kg diameter workpiece: max. 800 mm height workpiece: max. 800 mm Rapid traverse speed: 60 m (for X,Y and Z axis) Control: Siemens 840DSL spindle: Kessler Torque: max. 60 / 80 Nm tool magazine: HSK-A63 40 tools ATC MACHINE DETAILS Power: 26 / 35 kW EQUIPMENT - linear scales - pallet changer - belt filter

Year of construction: 2007, operating hours: 18,204 h, Condition: excellent (used), Functionality: fully functional, machine/vehicle number: 200038, TECHNICAL DETAILS X-axis travel: 730 mm Y-axis travel: 730 mm Z-axis travel: 740 mm B-axis: 360º B-axis step size: 0.001º CNC control: Mazatrol MATRIX NEXUS spindle speed: 18.000 rpm spindle drive power: 30 / 25 kW spindle torque: 259 / 191 Nm rapid traverse: 60 m/min number of pallets: 2 pallet dimensions: 500 x 500 mm workpiece diameter: 800 mm workpiece height: 1.000 mm workpiece weight: 700 kg tool holder: SK-40 number of tools: 60 Cslrgijlu E Icj Eqsrb tool diameter: - with free neighbor places: 150 mm - with occupied neighbor places: 95 mm tool length: max. 420 mm tool weight: 12 kg MACHINE DETAILS hours under power: 80.452 h Spindle working time: 18.203 h Total power consumption: 65.7 kVA weight: 11.6 t Coolant supply through the spindle: 15 bar Tank capacity: 510 l EQUIPMENT - Equipment - Chip conveyor - signal lamp - High pressure pump - Work area light - Spindle active cooling unit

Year of construction: 1998, Condition: excellent (used), Functionality: fully functional, TECHNICAL DETAILS x-way: 720 mm y-way: 630 mm z-way: 630 mm control: OKUMA OSP 7000 Colek R Tp Uergi Eqjrb pallet size: 500 x 500 mm spindle speed: 10 - 5000 rpm tool holder: 10-fold pallet station tool holder: MAS BT 50 tool places: 200 pieces EQUIPMENT - tool breakage probe - Renishaw probe - High pressure coolant system - Coolant mist extraction system - Spindle load and torque monitoring - Thread milling - Chip conveyor The scope of delivery is not shown in the pictures but in the description text.

Condition: good (used), Year of construction: 2007, travel distance X-axis: 630 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, rapid traverse X-axis: 90 m/min, rapid traverse Y-axis: 90 m/min, rapid traverse Z-axis: 90 m/min, torque: 145 Nm, controller manufacturer: Siemens, controller model: Siemens 840D, table width: 500 mm, table length: 400 mm, spindle speed (max.): 16,000 rpm, number of slots in tool magazine: 80, Brand: Heller Type: MCi 16.1 Year of manufacture: 2007 Control: Siemens 840D Travel x-y-z: 630 mm B-Axis: 360000 x 0.001° Cjlrgi Ejvzz Tisqerb Rapid traverse rate in X-, Y-, Z-axis: 90000 mm/min Table dimensions: 500 x 400 mm Accelaration: 12 m/s² Spindle speed: 16000 rpm Spindle power: 38kW Torque: 145 Nm Magazin places: 80

Condition: ready for operation (used), Year of construction: 2000, operating hours: 48,743 h, Functionality: fully functional, machine/vehicle number: 28830006172, The machine is equipped with a chain magazine, pallet turntable and loading station. MAINTENANCE - Motor and pump for the hydraulic system replaced - Replaced the hoses - LI module replaced in the control cabinet - Drum on the Knoll system replaced TECHNICAL DETAILS X-travel: 600 mm Y-travel: 560 mm Z-travel: 560 mm B-axis: 360° Control: SINUMERIK 840D powerline Infinitely variable speed: 0 - 8000 rpm Tool magazine: Chain magazine Number of tool positions: 90 / max. 450 kg Circular pallet storage: "compact" Rotation speed PSA axis: 3 rpm Positioning time 1 x 90°: 3 s Pallet change time: 6 s Cslrgjtrdrnei Eqorb Number of storage locations: 4 Pallet size: 400 x 500 mm Loading height: 1100 mm Load with 1/2 loaded pallets: max. 350/600 kg/pallet Maximum workpiece weight with one-sided load: 350 kg Workpiece height: 770 mm Torque 100 % / 40 % ED: max. 124 / 191 Nm Motor power 100 % / 40 % ED: max. 13 / 20 kW Feed rate: 60,000 mm/min Rapid traverse: 60 m/min Set-up mode: 2,000 mm/min Feed force X,Z / Y: 9600 / 8000 N Position measuring system Resolution: 0.001 mm (position tolerance according to VDU DGQ 3441) MACHINE DETAILS Machine dimensions L x W x H: 4.5 x 2.4 x 2.4 m Installation area: 7 x 5 m Transport weight incl. cladding: 3,400 kg Transport dimensions DMC 60 H L x W x H: 2.9 x 2.0 x 2.4 m Connected load DMC 60: 80 kVA EQUIPMENT - Chip conveyor - Technical documents and installation plan available

Year of construction: 2006, operating hours: 109,000 h, Condition: excellent (used), Functionality: fully functional, Horizontal machining center with 6-fold pallet station Machine has run only in aluminum - new spindle in 2020 TECHNICAL DETAILS X-axis: 700 mm Y-axis: 800 mm Z-axis: 800 mm NC rotary table, B-axis 0.001 spindle speed: max. 18000 rpm control: SIEMENS 840D Shopmill clamping area: 500 x 500 mm table load: max. 800 kg workpiece diameter: max. 800mm workpiece height: max. 900mm tool holder: HSK 63 tool changer: 180 positions spindle power: max. 30 kW torque: 5.000 Nm Holding torque: 5.000 Nm rapid traverse/feed rate: 60 m/min Feed force in X/Y/Z: 10 kN EQUIPMENT Colrgsmfrgnei Eqorb - chip conveyor - Pallet station 6 pallets - Automatic tool measurement 3 D wireless probe M+H - Coolant system with paper belt filter - IKZ system with belt filter, 40 bar 30 tool pockets in the magazine are defective.

Condition: good (used), Year of construction: 2010, Tool magazine defective, only every 2 slots usable, Matsuura Cublex 63 / PC2, year of manufacture 2010, Siemens 840 DI control system, travel X/Y/Z 760/845/660 mm, A axis +30/-120°, C axis 360°, Renishaw OMP 60, Blum Laser, Ww 160 times expandable to 320 places, Spindle speed up to 12,000 rpm, Crjlrgova A Rasi Eqsb HSK 63, 2-fold pallet Pallet size 500 mm, 3 square pallets, 2 round pallets for turning operations, IKZ, Flies filter, IPC - selectable acceleration for HSC machining, HSC precision additional software for 5-axis simultaneous machining,

Year of construction: 2006, operating hours: 44,825 h, Condition: excellent (used), Functionality: fully functional, machine/vehicle number: 1167000036, TECHNICAL DETAILS X-axis travel: 700 mm Y-axis travel: 800 mm Z-axis travel: 800 mm B-axis: 360º B-axis step size: 0.001º spindle speed: max. 10.000 rpm spindle drive power: 30/20 kW (40%/100% ED) CNC control: SIEMENS 840D Powerline ShopMill Classic Crelrgielu Ex Rs Eqob number of pallets: 2 pallet dimension: 500 x 500 mm workpiece diameter: 800 mm workpiece height: max. 1.350 mm tool holder: SK-40 number of tools in magazine: 45 MACHINE DETAILS hours under power: 64.431 h Spindle working time: 44.825 h Total power consumption: 60 kVA Supply voltage: 400 V / 50 Hz Connected current: 100 A Coolant supply: 40 bar Tank capacity: 980 l EQUIPMENT - chip conveyor - rotating sight glasses - operating mode 4 - high pressure pump - Laser tool measurement for measuring tool length and diameter - Prepared for HEIDENHAIN probe

Condition: good (used), Year of construction: 1997, There are 2 machines available Heller MCPH 150 / 2 machines for sale, year of construction 1997, Celrougtl Aogi Eqerb Control Unipro 90, travel X/Y/Z 630/520/570 mm, tool changer 52 times, SK 40 holder, spindle speed up to 8,000 rpm, 2-fold pallet 400 x 500 mm, IKZ 50 bar, Knoll coolant system, 4 axis 0.001°, chip conveyor, many parts have already been replaced, spare parts package available,

Condition: good (used), Year of construction: 2010, travel distance X-axis: 660 mm, travel distance Y-axis: 775 mm, travel distance Z-axis: 675 mm, Grob G 350 / 5 axles, Year of manufacture 2010, Heidenhain iTNC 530 control system, Crolrgietwcpuo Eqjb Travel X/Y/Z 660/775/675 mm, 2 axes NC swivel rotary table, Ww 40 times, HSK 63 holder, Spindle speed up to 16,000 rpm, IKZ - internal high-pressure cooling, chip conveyor, interchangeable pallet,