New demonstration machine! List price: €86,567 net. Basic machine, complete in standard configuration for drilling and grooving: Detailed technical data, see data sheet for ProTec Type 0571. Processing unit with: PowerBlock with 21 spindles and 1 grooving saw - 13 vertical drilling spindles - 6 horizontal drilling spindles in Y - 2 horizontal drilling spindles in X - 1 grooving unit in Y. 4th-axis drilling in Y. Workpiece sizes and weights: - Workpiece width (X): min. 60 mm / max. 1000 mm - Workpiece thickness (Z): min. 6 mm / max. 60 mm - Workpiece length (Y): min. 250 mm in through-feed mode, max. 5600 mm programmable workpiece length in software - Workpiece weight: max. 75 kg. Milling unit Profit HSK63F with 3-position magazine for automatic tool change, motor 5.5 kW (S1), 1000-20000 rpm with frequency inverter, right and left rotation, for tool holder HSK63F with collet 462E/OZ25, milling cutter length up to 130 mm. Information: Processing unit MultiUnit with PowerBlock with 21/23 spindles, grooving saw, and optional milling unit Profit. Connection power 12 kVA. Rated current 17.5 A. Fuse 32 A. Voltage 400 V, 50 Hz, 3-phase (without transformer). Power supply TN or TT. Pneumatics connection 7 bar (102 psi). On the machine: Coupling plug (quick coupling) ¼, DN7.2, brass, factory-side. For the machine: Coupling socket (quick coupling) ¼, DN7.2, brass, customer-side. Supply line, hose inner diameter 12 mm (min.). Compressed air requirement: Continuous air consumption approx. 230 L/min (approx. 3.8 L/sec) (compressed air). Extraction connection: 3x extraction nozzle, dia. 80 mm. Extraction speed: 30 m/sec - measured at the extraction nozzle. Extraction requirement: min. approx. 2500 m3/h min. Machine weight: approx. 1650 kg (with options!). Machine installation location: As a rule, a ProTec can be fixed to the floor with screws. A concrete floor (or foundation) is assumed (at least at the 4 machine edges/machine feet). Equipment: Protec 571 Profit HSK63F with 3-position magazine. Roller table 765 mm (Y-axis), foldable, for the front of the machine, width 500 mm. Roller table 765 mm (Y-axis), foldable, for the back of the machine, width 500 mm. Auxiliary stop 600 mm with integrated rollers for roller tables. Additional safety device via a louver curtain. Requirement for horizontal milling for Lamello P-system (without tools for Lamello P-system). Drill set for Protec, shank ø 10 mm with clamping surface (JSO) 1 HW-countersink drill bit 5x70mm (NL 35mm), LI # 30566-5-05035-L3. 1 HW-dowel drill bit 5x70mm (NL 35mm), RE #30540-5-05035-R4. 1 HW-dowel drill bit 5x70mm (NL 35mm), LI #30540-5-05035-L3. 1 HW-dowel drill bit 8x70mm (NL 35mm), RE #30540-5-08035-R. 1 HW-dowel drill bit 8x70mm (NL 35mm), LI #30540-5-08035-L2. 1 HW-dowel drill bit 10x70mm (NL 35mm), LI #30540-5-10035-L1. 1 HW-pot drill bit 15x70mm (NL 35mm), LI #30300-5-15070-L1. 1 HW-pot drill bit 20x70mm (NL 35mm), RE #30300-5-20070-R1. 1 HW-pot drill bit 35x70mm (NL 35mm), RE #30300-5-35070-R. 1 HW-grooving cutter ø 125/30 mm, grooving cutter width (SB) 4.0 mm, Z=12, LI, Leitz. Only for chipboard and MDF, solid wood on request and by arrangement. Tool holder HSK63 F 3.0 pcs. For collet 462E/OZ25. Collet 462E/OZ25 for shank 25 mm, 3.0 pcs. Indexable carbide shank milling cutter, Z1+1, 1.0 pcs. with WP drilling insert ø20, S25, LI 120, L2/L3 58 mm. Grooving cutter HW indexable inserts Z1, 1.0 pcs. with WP drilling insert, D Ø 10 mm, d Ø 10 mm, L1 75 mm, L2 25 mm, L3 40 mm, RE (the a
Ppsdpfx Ajw Tfzfogmew
The listing was translated automatically. Translation errors are possible.
