Used Bauer Generator for sale (285)

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 1,000 kg, fuel type: diesel, color: red, power: 50 kW (67.98 HP), total length: 2,270 mm, total width: 880 mm, total height: 1,120 mm, Continuous output: 50 kW / 62.5 kVA Maximum output: approx. 55 kW Voltage: 230 / 400 V Frequency: 50 Hz Speed: 1,500 rpm Power factor: cos φ ≈ 0.8 Engine: 4-cylinder diesel Displacement: approx. 4.15 litres Cooling: water-cooled Generator: brushless, AVR (automatic voltage regulation) The unit is equipped with ATS (Automatic Transfer Switch) CE marking: YES Ksdpfsy Dtwksx Afkjdr Please do not hesitate to contact us for further questions.

Condition: new, Bauer DK66 SZ3-2211/163 L gearbox motor, M 16435551-01, serial number as shown in the photo. Mounting hole spacing: 91 x 91 mm, drive shaft diameter: 25 mm. Unused, with signs of storage. 100% functional. Scope of delivery as shown in the photos. Kjdpfoi D E Dcex Afkedr

Condition: used, Year of construction: 1992, cutting diameter 260 mm Kodpfxju Rt Hde Afkodr saw band length 3890 mm cutting width 340 mm cutting speed Stufenlos m/min total power requirement 2,4 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 2,5 x 1,4 x 2,0 m Vice can be adjusted for angle cutting.

Condition: used, Year of construction: 2021, Bauer Maschinenbau Bohrmax Z40, Section Drill & Milling Machine, Overall Table Length 4350mm, 4 Sections 1050mm Long, Penta NC V2 Programme Control, 10 Tool ATC, CAT 40 Spindle, 11kw Power, Travels X Axis = 4000mm, Y Axis = 580mm, Z Axis = 700mm, Drilling Capacity 3 - 40mm, Drilling Speed Range 140 - 2300rpm, Rapid Traverse X = 24m/min, Y & Z = 7.5m/min, Table Width 560mm, Underside of Tool Holder to Table 700mm, Motor 7.5kw. S/No. 21-0156 (2021) Location: These lots are located in Burton-on-Trent, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. Ksdszr Ix Aspfx Afkodr

Condition: ready for operation (used), Year of construction: 2019, Two heavy-duty transport trolleys are available. 1) Pefra 4000, year of construction: 2019, load capacity: 3000kg, permissible driving speed: 10km/h, permissible total weight: 4010kg, tare weight: 1010kg. 2) Bauer RGP-1, year of manufacture: 2017, load capacity: 2000kg, insertion width: 700mm, insertion pocket length: 870mm, front dimension: 1540mm, tare weight: 378kg. Documentation available. On-site inspection is possible. Kdodpfx Asvdu Ixjfkjr

Condition: ready for operation (used), A marking machine for folding cartons including an inkjet printer is available. 1) Off-line feeding and transport system KBA König & Bauer udaFormaxx, min. product dimensions X/Y: 30mm/60mm, max. product dimensions X/Y: 450mm/500mm, min. product grammage: 80g/m², max. product thickness: 8mm, max. transport speed: 90m/min, max. throughput capacity: approx. 250pieces/min. Machine dimensions X/Y/Z: approx. 1300mm/700mm/400mm, weight: approx. 150kg. 2) Continuous inkjet printer KBA alphaJET mondo, print lines: 5, vertical resolution: 32P, character height range: 2mm-15mm, max. printing speed: 780m/min, nozzle diameter: 62µm, machine dimensions X/Y/Z: approx. 500mm/350mm/300mm, weight: approx. 20kg. Including base frame. Documentation available. On-site inspection is possible. Kjdpfxex Tumfo Afkodr

Condition: good (used), Year of construction: 1992, Offer 23426 Technical Data: - Cutting range at 90° round 420 mm - flat 635 x 290 mm - Cutting range at 45° round 360 mm - flat 420 x 300 mm - Saw blade dimensions 5200 x 32 x 1.1 mm - Infinitely variable cutting speeds 18 to 108 m/min - Hydraulic lifting and lowering of the saw frame - Hydraulic material vise - Cutting pressure infinitely adjustable 0 - 10 m/min - Total drive power 400 V / 2.2 kW - Coolant device Ksderl Irvjpfx Afkjdr - Machine mounted on bogie - Feeding roller table motor-driven 4000 mm - Discharge roller table with length stop 6000 mm - Required space approx. W 2500 x H 1400 x D 1100 mm - Machine weight approx. 950 kg - Roller table weight 2000 kg

Year of construction: 1992, condition: good (used), machine/vehicle number: 29-0288, Offer 04612 Kedpfx Afogin Ndskjdr Technical specifications: - Cutting range at 90° (round): 260 mm - Cutting range at 90° (flat): 450 x 240 mm - Cutting range at 45° (round): 230 mm - Cutting range at 45° (flat): 240 x 200 mm - Machine is mounted on the original rotating table - Saw band dimensions: 3660 x 25 x 0.9 mm - Cutting speeds: 20 / 35 / 50 / 70 m/min - Hydraulic lifting and lowering of the saw frame - Cutting pressure, infinitely adjustable: 0 - 10 m/min - Total drive power: 400 V / 0.8 kW - Coolant system - Space requirement: approx. W 2100 x H 1200 x D 1000 mm - Weight: approx. 500 kg

Condition: good (used), Year of construction: 1997, machine/vehicle number: 97-04002, Offer 25114 Technical specifications approx.: - Roller diameter 500 mm - Throat depth 500 mm - Max. clearance height 400 mm - Table size 630 x 530 mm Kedpfx Afjwmnz Nekjdr - Table tilts 10/30° - Table height from floor 950 mm - Saw blade length approx. 3900 mm - Saw blade width approx. 3 - 25 mm - Cutting speeds (presumably) 81 - 145 - 208 - 267 m/min - Drive 400 V / 1.1 kW - Weight approx. 400 kg - Space required approx. W 750 x H 2000 x D 1000 mm

Condition: used, Year of construction: 2017, operating hours: 13,000 h, BAUER BG 33 H Kjdpszqcuisfx Afkjdr Year of Man. 2017 Base carrier Bauer BT 75 More information upon request.

Condition: used, Year of construction: 2017, operating hours: 15,000 h, BAUER BG 28 H Year of Man. 2017 Kodezqct Eepfx Afkodr Base carrier Bauer BT 75 More information upon request.

Year of construction: 2011, condition: used, Field of application: Construction VAT/margin: VAT deductible Kjdpfx Ash Tyytofkodr Please contact Mohamad Fattah Ahmad for more information Bauer MAT SKC-30-K Slurry Mixing Plant Good working order

Year of construction: 2005, operating hours: 9,000 h, condition: used, Field of application: Construction Please contact Mohamad Fattah Ahmad for more information BAUER BG 28 V Ksdpfeh Tyy Eex Afkedr Year of Man. 2004/5 Base carrier Sennebogen BS 80 Under carriage UW 110 CAT Engine 354 kW Rotary Head KDK 275 S Prepared for Kelly, CFA, FDP & FOW Prepared for BAUEr oscillator

Year of construction: 2006, operating hours: 2,500 h, condition: used, Field of application: Construction Please contact Mohamad Fattah Ahmad for more information Vibrator MR 100 V for RTG Piling rigs inclusive clamp MRZ 105 Kedpfx Aeh Tyziofksdr

Year of construction: 2008, condition: used, Field of application: Construction Please contact Mohamad Fattah Ahmad for more information Upper carriage Sennebogen BS 60 R CAT C 18 570 kW Twin turbo central lubrication Ksdpfsh Tyzqex Afkodr optional with vibrator MR 100 or MR 125 V B Tonic for Vibrator / FOW Drilling / SCM and SMW Mixing Good working condition

Year of construction: 2009, condition: used, Field of application: Construction VAT/margin: VAT deductible Please contact Mohamad Fattah Ahmad for more information BAUER Kellybar BK 25/343/3/21m Kjdpfeh Ty Ddsx Afksdr

Year of construction: 2008, operating hours: 9,750 h, condition: used, Field of application: Construction Please contact Mohamad Fattah Ahmad for more information Piling rig Upper carriage : Sennebogen BS 80 R Kdodoh Tyzxspfx Afkor Engine : CAT C 18 570 kW Optional : Vibrator MR 125 V, KDK 232 S, DKS 100/ 200 Additional : Systems Vibrator, Kelly and CFA drilling central lubrication, air compressor , prepration CSM The machine is in very good working condition!

Year of construction: 2011, condition: used, Field of application: Construction VAT/margin: VAT deductible Please contact Mohamad Fattah Ahmad for more information Kdsdoh Ty Daspfx Afkjr Bauer - MAT Bentonite Pump BP 125 2 units available Good working order Immediately available

Year of construction: 2008, operating hours: 13,480 h, condition: used, Field of application: Construction Kdedpfxjh Tyyzo Afkor Make of engine: CAT Please contact Mohamad Fattah Ahmad for more information

Year of construction: 2013, operating hours: 7,550 h, condition: used, Field of application: Construction Please contact Mohamad Fattah Ahmad for more information Kodpfx Aoh Tyy Tsfkedr Base Carrier Sennebogen BS 95 Under Carriage Bauer UW 130 Engine CAT C15 with 433 kW Rotary KDK 390 S Working Hours 7.550Hrs Kelly Bar available in different lengths Big Single layer winch 3m mast extension Prepared for oscillator and BTM drilling Good working condition!

Year of construction: 2011, condition: used, Field of application: Construction VAT/margin: VAT deductible Please contact Mohamad Fattah Ahmad for more information MAT Water Buffer Tank WB-1700 Good working order Kjdsh Ty A Sjpfx Afkjdr

Year of construction: 2011, condition: used, Field of application: Construction Ksdpfx Aeh Tyypefkedr VAT/margin: VAT deductible Please contact Mohamad Fattah Ahmad for more information Bauer MAT EP-12-1200 Eccentric Screw Pump Good working order

Year of construction: 2015, operating hours: 7,890 h, condition: used, Field of application: Construction Please contact Mohamad Fattah Ahmad for more information Year of man: 2015 Engine CAT C 13 / 350 kW Rotary Bauer KDK 280 S B Tonic for Kelly CFA and FDP Kdsdpfx Aoh Tyywjfker Very good working condition!

Year of construction: 2017, operating hours: 2,000 h, condition: used, Please contact Mohamad Fattah Ahmad for more information BAUER BE550 (One time used!) Kodpfx Aeh Ty A Dofkjdr Scalping unit GS 500V for BE550 2x Desander BE 275-60 for BE550 Completion left and right 2x Pump unit BP 125 Pump 2x Cable remote control for BP pump 10m Piping Kit Walkway BE550 cpl. Walkway BE550 Scalping unit GS 500V cpl. Slurry Tank ST-H25 Central Control Box BE550 Radio Control Europe and extension cable for remote control 50m Optional with KBKT Pump

Year of construction: 2009, condition: used, Field of application: Construction VAT/margin: VAT deductible Kodoh Ty Dlepfx Afkodr Please contact Mohamad Fattah Ahmad for more information Vibrator MR 125 V with clamp MRZ 125 RTG Rammtechnik / Bauer Maschinen GmbH Vibrator Ready for the site and in good working condition!