Eccentric press

Weingarten ARP 125

Condition: good (used), Year of construction: 1998, Press Force 315.00 t Stroke 500 mm Throat 425 mm Installation Height (Upward Stroke) 1,000 mm Table Surface 1,200 x 815 mm Table Height above Floor 800 mm Ram Surface 1,100 x 700 mm Speed Down 48 mm/s Speed Up 330 mm/s Working Speed 19 mm/s Oil Volume 1,600 l Power Requirement 82.0 kW Weight 23.00 t Dimensions (WxDxH) 2.4 x 2.8 x 4.0 m For Permitted for manual loading according to the CE standard Prjdpfx Aev Rwu Uobgob with oil-hydraulic drive, controllable depending on pressure/time and travel, light-guard at the front (Sick), two-hand operation permitted for manual loading according to the CE standard with oil-hydraulic drive, controllable depending on pressure/time and travel, light-guard at the front (Sick), two-hand operation

Condition: used, Year of construction: 1996, pressure 80 t throat 320 mm stroke 6 - 118 mm no. of strokes 30 - 80 Hub/min ram adjustment 70 mm table surface area 830 x 610 mm ram surface 650 x 400 mm column daylight (nach hinten) 630 mm total power requirement kW weight of the machine ca. 8,1 t dimensions of the machine ca. B 1,2 x T 1,9 x H 3,3 m Furnishing: - with gear transmission - fixed table - automatic stroke adjustment - automatic ram adjustment Prsdpfetycdkjx Abgjb - hydr. Overload - Ejector - Grease central lubrication - Cover plate for drainage hole - Continuous speed control using a frequency converter - Machine is technically checked in our company and receives a new control cabinet with safety controls and touchscreen - current UVV test with braking time measurement

Condition: used, Year of construction: 1979, Technical details: pressure: 250 t slide stroke: 40-160 mm throat: 545 mm ram adjustment: 110 mm Table dimensions: 1250x800x100 mm biggest distance between table & ram: 670 mm drawing capacity: 16 to table height over floor: 1000 mm surface area of ram: 900x670x100 mm distance between columns: 500x400 mm total power requirement: 23 kW weight of the machine ca.: 16,6 t dimensions of machine: 2,8x1,4x3,7 m dimensions electric cabinet LxWxH: 1,15x0,6x2,1 m Ejector and counter holder force: 16t Table size with 4x T-slots parallel running (1250x800x100mm) Ram plate with 4x T-slots radially running Podpou Nfinofx Abgjrb Data at bottom dead center UT: largest stroke: 510mm smallest stroke: 570mm Accessories: - Steel plate 1170x860x80mm *

Condition: good (used), Year of construction: 1977, functionality: fully functional, power: 15 kW (20.39 HP), pressing force: 200 t, table width: 800 mm, table length: 1,100 mm, throat depth: 440 mm, distance table to ram: 400 mm, total length: 37,200 mm, total width: 24,000 mm, total height: 18,200 mm, overall weight: 12,600 kg, ram adjustment: 110 mm, ram stroke: 40-180 mm Prsdpfx Abotu Hvwsgsb incl. Helmerding feed, 400 mm x 4 mm Strokes: 40 + 60 1/min Distance table/ram - adjustment top/stroke bottom: 400 mm Table opening: 450 mm diameter

Condition: used, pressure 80 t throat 320 mm stroke 8 - 112 mm table surface area 830 x 600 mm no. of strokes 30 - 85 Hub/min ram surface 650 x 400 mm Predpfx Astqm Dmjbgeb ram adjustment 71 mm clamping plate 990 x 550 mm table height over floor 810 mm table height over floor 800 mm column daylight (vorn) 680 mm column daylight (hinten) 520 mm total power requirement 7,5 kW weight of the machine ca. 7,7 t dimensions of the machine ca. 1,5 x 2,2 x 3,15 m Equipment: - with wheel presentation - fixed table Machine was/is partially overhauled: - Complete disassembly and inspection - Table and ram surfaces milled - New seals and hydraulic hoses - new main engine - the two main bearing bushes, the bushing of the 3rd bearing and the connecting rod bushing are new - Shaft machined and booked out - Painting - new control cabinet with PLC and touchscreen including cabling. - Current UVV test with braking time measurement

Condition: used, Year of construction: 1976, pressure 100 t throat 315 mm stroke 8 - 112 mm table surface area 725 x 570 mm ram surface 410 x 315 mm ram adjustment 80 mm no. of strokes 55 / 82 Hub/min Podpfxeugnpie Abgjrb tool shank hole (depth x diameter) 85 x 50 mm dayligth 355 mm total power requirement 7,5 kW weight of the machine ca. 6 t dimensions of machine L x W x H 2,00 x 1,00 x 2,87 m

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, Equipment: documentation/manual, TECHNICAL CHARACTERISTICS: Press Model: T160 CNR6 Serial number: 160/0/46/00 Year of construction: 2000 Nominal force: 1600 kN Weight: 13,800 kg Nominal number of strokes: 55 C/min. Min./max. number of strokes: 10/55 C/min. Max. number of insertions: 17 C/min. Min./max. clutch pressure: BAR 4.0÷5.5 Max. stop time: 0.22 s Safety distance: 355 mm. Energy (i=15% nominal strokes): 14,500 KJ Min./max. stroke: 10/200 mm Ram adjustment: 110 mm. PMI high adjustment: 430 mm Maximum extraction stroke: 60 mm Work surface dimensions (H, D, L): 78/750/1250 mm Ram dimensions (D, L): 600/850 Shank diameter: 60 mm Protrusion from the center: 370 mm Maximum mold size: 600/850 mm Maximum mold head weight: 344 daN Operating air pressure: BAR 5.5÷6 Stop position: TDC Voltage: V 380 Frequency: 50Hz Auxiliary voltage: V 24 NEW COMPONENTS INSTALLED: • Safety guards with safety keys; • Clutch plates; • Clutch pins and brite; • Flywheel bearings; • Flywheel oil seals; • Stroke change nose; • Balancing cylinder gasket kit; • Air pressure gauges; • Electrical panel; • Inverter (speed variator); • Motor; • Motor pulley; • Work surface revived on CNC machine Pedpfxewaiw Ss Abgorb Supplied with six (6) months warranty, technical documentation and CE conformity Twelve (12) months electrical panel warranty.

Condition: used, Year of construction: 2001, Technical details: pressure: 250 t throat: 360 mm distance table/ram: 800 mm max. ram stroke: 500 mm ram speed - reverse: 390 mm/sec. ram speed - forward: 450 mm/sec. hydraulic-pressure: 280 bar connected load: 43 kW work speed: 11....50 mm/s operating pressure: 20 MPa Pedpfx Asxna Uzobgerb total power requirement: 20,5 kW weight of the machine ca.: 17 t dimension machine xH: 3,9 x 1,9 x 4,0 m

Condition: used, Year of construction: 1993, pressure:160 t throat:360 mm stroke:300 mm table-size:1500 x 700 mm dimension of ram:1200 x 560 mm return capacity:40 t stroke speed:400 m/min stroke speed - under load:16 - 42 Hub/min Prodpjh Ra R Iefx Abgsb stroke speed -return:350 mm/min die-cushion pressure:630 kN die cushion stroke:100 mm total power requirement:42 kW weight of the machine ca.:19,5 t pressure of ejector:50 kN ejector stroke:50 mm

Condition: used, Year of construction: 1983, pressure 100 t throat 375 mm stroke 20-125 mm no. of strokes 60 Hub/min ram - range of adjustment 80 mm table surface area 920x660 mm ram surface 700x450 mm hole in the table Ø90 mm tool hole in ram Ø50 mm Prsdpfx Abexh Swhogsb weight of the machine ca. 8 t dimensions of the machine ca. 2100x1500x3300 m