Lathe - cycle controled

WEILER E 60 / 2000

Condition: reconditioned (used), Year of construction: 1988, functionality: fully functional, This 2A576 radial drilling machine has been completely overhauled and restored to full producbon capacity. Basic technical data: Drilling diameter: in steel 80 mm / in cast iron 100 mm Headstock travel along the arm: 2000 mm Gsdpour H I Nofx Amgebr Max drilling radius: 2500 mm Spindle travel: 500 mm Spindle: ISO50 Stepless sefng of spindle feed rates Spindle speed range: 2-1600 rpm. Column diameter: 500 mm Main drive engine power: 7.5 kW Dimensions L/W/H: 4180/1280/4125 mm Weight: 12 tons This drilling machine meets the minimum safety and health requirements set out in Direcbve 2009/104/EC, known as the "Tools Directive". Machine ready for checking under power in our warehouse in central Poland.

Condition: used, Year of construction: 2000, centre height 280 mm centre distance 1200 mm turning diameter over bed 570 mm turning diameter over slide 365 mm turning length 1000 mm spindle taper DIN 55027 Gr. 8 control Sinumerik 810 D SIEMENS bed width 360 mm spindle bore 62 mm turning speed range 3 - 2500 U/min feed: 5000 mm / min rapid travel - longitudinal/face 10 m/min 3-jaw-chuck diameter 250 mm Gbsdpsx E Dn Aofx Amgsr quick change toolholder SANDVIK Coromant Capto drive capacity - spindle motor 25 kW taper in tailstock-quill MK 5 dia. of quill 100 mm quill stroke 190 mm voltage 400 V weight of the machine ca. 5,0 t dimensions of the machine ca. 3,55 x 2,20 x 1,95 m - Serial No.: 2022-3742-03 - CNC-Control SIEMENS Sinumerik 810 D - Rapid feed - Coolant equipment - Machine lamp

Condition: excellent (used), Year of construction: 2008, 300 kg load capacity welding rotary table, with hollow shaft diameter 125 mm with chuck 320 mm or 400 mm very robust speed continuously adjustable from 0.15 to 5.0 RPM current transfer 350 A rotary table diameter 400 mm tilting up to 135° height in horizontal position 835 mm, when tilted up to the center approximately 735 mm Gedpfx Aolamtbomgobr length 850 mm x width 580 mm

Condition: new, Year of construction: 2025, - New machine - Precision lathe with automatic cycle control, for chuck and shaft machining. Brand: WEILER | Model: E 120 x 4500 | Year of manufacture: 2025 The precision giant. A powerful and energy-efficient production lathe with optimum accessibility. The machine for heavy workpieces. Maximum cost-effectiveness from turning to milling. Precise and universally applicable, it impresses with: - State-of-the-art control and drive technology - Extremely simple operation and programming Gbodpfxoy Hfy As Amgjr - Highest accuracy - Longevity - User-friendly ergonomics TECHNICAL DATA / ACCESSORIES, EQUIPMENT: Control system: Weiler cycle control ONE 1 (Siemens) Working range: - Centre height: 600 mm - Swivel diameter over bed: 1.200 mm - Swivel diameter over cross slide: 830 mm - Centre distance: 4.500 mm Extensive, high-quality equipment. Sales within Germany include a 24-month warranty. No guarantee is given as to the completeness and accuracy of the technical specifications or the equipment. - Subject to prior sale - Detailed technical data sheet and information on the equipment available on request.

Condition: good (used), Year of construction: 2008, Ref. -No.: 10623 Manufacturer: WEILER Type: E90 x 4500 Year of construction: 2008 Type of control: CNC-Steuerung Control: SIEMENS D1 - Zyklen Storage location: Halberstadt Country of origin: Germany Gbodpfjzkpwqex Amger Bed width: 600 mm Turning Length: 4500 mm Swing Diameter Over Bed Slide: 900 mm Spindle Bore: 128 mm Max. Torque: 6000 Nm Feed Capacity - Z: 20000 kN Feed Capacity - X: 20000 kN Rapid Speed: 10/5 RPM Tailstock Quill Diameter: 140 mm Tailstock Quill Stroke: 300 mm Lathe tool dimensions: 32 x 25 mm Front bearing diameter: 178 mm Circumferential diameter over facing slide: 530 mm Spindle head according to DIN 55027 (size): Gr. 11 Tailstock inner cone: MK 6 / 140 Type Machine length: 6900 mm Machine width: 2600 mm Machine Height: 2150 mm Weight Of The Machine Ca.: 10,5 t Further information: The machine can be viewed while powered up.

Condition: new, clamping range of chuck 10 - 200 mm height 67,5 mm Gsdefv Awlepfx Amgebr daylight 65 mm external diameter Futter 200 mm external diameter Spannhebel 360 mm weight 4 kg Characteristics: • Self-centering. • Reversible jaws. • Fixed clamping levers allow fast workpiece changes. • Low weight and flat design minimize the center of gravity. The D-D quick chuck enables a quick product change and is suitable excellent with frequent component changes. You do not need a loose one Quick release wrench, as the levers are integrated into the quick release chuck.

Condition: used, turning diameter 820 mm turning length 5000 mm turning diameter over slide 460 mm control B2T max. torque on the spindle 3400 Nm turning speeds 5,6-1120 U/min Feed 1-5000 mm/min Rapid movement 5000 mm/min tailstock quill taper MT 6 3 jaw chuck Forckrath 630 mm steady 525 mm steady 335 mm main drive motor 50 kW The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More Gbsdpfx Ameyqtr Tegjr than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: new, table diameter 1300 mm table load 3 t swivelling range 0 - 130 Grad turning speeds 0,05 - 0,5 U/min 6000 Nm 0 1,1 / 1,1 kW welding current 700 Ampere • Self-locking gear, therefore no forward and backward at eccentric load. • Electronic components from Schneider, Siemens and Delta. Gjdpfefv Ax Hex Amgjbr • Frequency-controlled stepless speed of the turntable. • High stability due to the robust construction. • welding power transmission • CE certificate. • Very good price / quality ratio. • The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch.