CNC lathe

Vicktor Vturn II-26

Condition: used, Year of construction: 2012, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 540 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 20 m/min, feed rate X-axis: 16 m/min, feed rate Y-axis: 16 m/min, feed rate Z-axis: 16 m/min, nominal power (apparent): 16 kVA, controller manufacturer: Heidenhain, controller model: ITNC 530, table load: 800 kg, overall weight: 5,300 kg, spindle speed (min.): 10,000 rpm, operating hours of spindle: 8,500 h, spindle motor power: 12 W, spindle nose: ISO B40, number of spindles: 1, number of slots in tool magazine: 24, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, Machine in very good condition and maintained by the manufacturer. Available immediately. Renishaw probe Video available on request. Fpodpfswxrgtox Ag Ssb Delivery and installation by us possible.

Condition: used, Technical details: Fpodpfeu Ix Rpsx Ag Ssb turning diameter over bed: 1040 mm turning diameter over support: 720 mm centre distance: 5400 mm center height over bed: 540 mm control: Siemens 828D CNC mit shop turn turning dia. in gap: 1300 mm length of gap: 640 mm spindle bore: 152 mm revolution per minute: 3,5...1000/ 4 steps U/min feed:: x-Achse: 37,24 (m/min) m/min feed:: z-Achse: 21,91 (m/min) m/min force of feed longitudinal: x-Achse: 6,44 (KN) N feed force Z - max.: 17,2 (KN) N tailstock taper MT: MK 6 tailstock quill stroke: 300 mm total power requirement: ca. 30 kW weight of the machine ca.: 14,1 t space requirement approx.:: L:7,7xB:1,7xH:2,0 m CNC Lathe with shop turn Geometric overhaul is in procedure. Equipment: - headstock Morse 6, travel of spindle sleeve 300mm - thread cutting possible (metric thread, inch threads, module threads) - multi quick steel holder swiveable 360° - 3-jaw lathe chuck Ø=630mm - chuck protection - 2 steady rests (Lynettes) (1x fixed + 1x fixed open) - 4 pcs tips for tailstocks - 5 x multi quick change steel holder for chisel - 1 x drill chuck 16mm + 2x drills with MK-cone sleeves 68,5mm & 24,75mm - 1 lot self constructed clamping means Accessories: - face chuck Ø=800mm (adaptation necessary) - CNC turning with shop turn - your benefits at first glance: - flexible programing via graphic interactive (without DIN/ISO knowledge) or text programming with contour definition and cycle support - user friendly operation through practical set up -and measuring operations, clearly arranged tool managment and 3D-Simulation - increase of productivity via supporting PC-Software for work preparation without machine assignment *

Condition: good (used), Year of construction: 2007, Parts shown by hand not come. Technical details shown on picture. Fodpsrpn Dvofx Ag Sjpb

Condition: used, total height: 1,600 mm, total length: 5,000 mm, total width: 1,600 mm, Empty weight: 3.190 kg Price: On request - Documentation available: No - CE certificate present: No - Drive system: Conventional - Centre height [mm]: 315 - Swing over bed [mm]: 630 - Distance between centres [mm]: 3000 - Spindle bore [mm]: 80 - Min. spindle speed [rpm]: 10 - Max. spindle speed [rpm]: 1000 - Options: Digital readout, Removable bed Fodpfxswnitis Ag Sepb - Swing over removable bed [mm]: 900 - Type of digital readout: 2 assen - Control: Conventional - Transport dimensions: 5000mm x 1600mm x 1600mm (l x w x h) - Transport weight [kg]: 3190kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1995, functionality: unexamined, machine/vehicle number: XXX, We are going to sell 3 wire edm machines and 1starthole edm machine Fpodpstylpcsfx Ag Sjb

Year of construction: 1988, condition: good (used), TOS SN 50 B (1988) Fpedpfjxl Tt Sjx Ag Ssb Manufacturer: TOS Model: SN 50 B Year of manufacture: 1988 Type: Universal centre lathe Swing over bed: 500 mm Swing over cross slide: 270 mm Swing in gap: 700 mm Distance between centres: 1500 mm Bed width: 300 mm Spindle bore: 52 mm Spindle speed range: 22 – 2000 rpm Spindle nose: Camlock D1-6 Spindle motor power: 7.5 kW Longitudinal feed range: 0.04 – 2.24 mm/rev Cross feed range: 0.02 – 1.12 mm/rev Metric threads: 0.5 – 224 mm Inch threads: 56 – 0.25 TPI Module threads: 0.25 – 112 mm DP threads: 112 – 0.25 DP Tailstock quill diameter: 75 mm Tailstock quill travel: 160 mm Tailstock taper: Morse 5 Machine length: approx. 2800 mm Machine width: approx. 1100 mm Machine height: approx. 1300 mm Machine weight: approx. 2000 kg

Condition: used, Year of construction: 2005, x-travel 600 mm Fpedpjvxwq Esfx Ag Sjb y-travel 500 mm z-travel 600 mm control iTNC 530 Heidenhain table surface area 900 x 500 mm spindle turning speed - stepless 0-12.000 U/min spindle drive 10 kW tool taper SK40 DIN 69871 tool magazin: 24 total power requirement 22 kW weight of the machine ca. 6,4 t dimensions of the machine ca. 5,3 x 3,5 x 3,5 m Chip conveyor scraper belt Coolant system 3 pumps / cartridge filter Grundfoss high-pressure pump type CRK2-220/22 A-W-A-AUUV

Year of construction: 2004, condition: good (used), You can check under power, after scheduling an appointment. Fsdpfx Aeidqwdeg Sopb Dismantling, moving and transporting the machine is entirely the customer's responsibility. We can help with loading as needed. Parity: EXW Székesfehérvár

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 570 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, controller model: FANUC, workpiece height (max.): 520 mm, workpiece weight (max.): 300 kg, total height: 2,935 mm, total length: 3,600 mm, total width: 3,700 mm, table width: 860 mm, table height: 560 mm, table load: 300 kg, spindle speed (min.): 80 rpm, spindle speed (max.): 10,000 rpm, coolant supply: 12 bar, distance table center to spindle nose: 780 mm, spindle motor power: 15 W, spindle nose: ISO 40, number of slots in tool magazine: 34, tool length: 300 mm, tool diameter: 80 mm, tool weight: 8 g, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Vertical machining center with automatic pallet changer "DOOSAN mod. VC500" with CNC Fanuc 21i-MB Fpsdeu T Hg Tspfx Ag Ssb

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, table width: 600 mm, table height: 560 mm, table length: 1,200 mm, table load: 900 kg, spindle speed (max.): 12,000 rpm, Machine with just revised spindle, never used after Fsdpfx Ajrb Amljg Sspb Connected to power and available for inspections and tests Lubrication through spindle 30 Tools Heidenhain 530