Teach-in lathe

VDF DUS 1000 ti

Condition: excellent (used), Year of construction: 2004, turning length / mm turning diameter over bed / mm turning diameter over slide / mm control / Universal lathe VDF Boehringer DUS 1000 ti Csdpfoud In Hsx Aclori OPTIONAL EQUIPMENT SURCHARGE: C-AXIS MILLING TOOL Machine no. 2042.6616-05 Year of construction 2004 Turning length approx. 2200 mm Swing diameter over bed 1,000 mm Swing diameter over bed 1,000 mm Centre height over flat track 500 mm Bed width 560 mm Bed slide guide length 800 mm Spindle diameter front bearing 170 mm Spindle bore 128 mm Infinitely variable three-phase motor (AC motor) Drive power 37 kW Torque max. 4,069 Nm Total speed range 6.4 - 1,600 Gear stages 2 Heidenhain control Manualplus 4110, completely renewed approx. 1 to 2 years ago renewed 2 lynchets Equipped with roto power chuck, diameter approx. 500 mm. Including many accessories of clamping jaws, estimated 15 sets, as well as approx. 15 sets of Multifix basic holders, size D. Machine was equipped with a separate milling device, with its own control, value approx. 20.000,00 €. OPTIONAL EQUIPMENT SURCHARGE: C-AXIS MILLING TOOL Only operated by the owner, very good condition!

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, cooling capacity: 800 kW (1,087.70 HP), overall weight: 4,500 kg, Equipment: compressor, freezer, Refrigeration machine with 2x dry coolers Cooling capacity: max 800 kW Number of cooling circuits: 2 Refrigerant type: R134A Voltage: 400 V Absorbed power: 176 kW Year of manufacture: 2009 2 Trane CHHP0N2TKG0N134A semi-hermetic screw compressors, Crodorzq Arepfx Aclei shell and tube as evaporator, 2x oil separators, Guentner GBV 200 Evaporator TRANE EG 340 evaporator water concentration 560 liters Control cabinet 1x air-cooled condenser machine weight: 4500kg With dry coolers 1x Güntner GWH 090.1D/5-M PT: 30.8 bar PS: 28 bar The specified cooling capacity is at a water outlet of +7°C at a condensing temperature of +40°C.

Condition: used, Year of construction: 2025, operating hours: 21 h, functionality: fully functional, Powerful ride-on scrubber dryers in top condition for sale! The machine is in very good condition and ready for immediate use. Condition: Used, very good Operating hours: 21 hours Year of manufacture: 2025 SCHORR SCRUBBER DRYER 24V FLOOR MOP SCRUBBER 100AH SCRUBBER Efficient floor cleaning combined with extremely easy handling. Restore the shine to your hall! The fully electric ride-on scrubber dryer from SCHORR makes cleaning large hall areas much easier, especially due to the machine's excellent maneuverability. The steering angle is 90°, so pillars or narrow spaces, for example, are no problem. No special training is required to operate the machine. Simply fill it, get on, and drive off. With the built-in 100Ah batteries, intensive continuous use of approximately 4 hours is possible. The batteries are conveniently charged using the included charger at a standard 230V household outlet. SCHORR SCRUBBER DRYER RR1030FS – DISCOVER THE BENEFITS: Crodpfxewh Ri Ej Aclji -- Fully electric scrubber dryer with a 1030mm working width – ideal for large halls and rooms -- Up to 4500m²/h cleaning performance -- 80-liter fresh water tank and 85-liter waste water tank -- 510mm brush diameter -- Powerful 24V 100AH batteries -- Extremely robust and reliable Technical Specifications Manufacturer (abbreviation): SCHORR Manufacturer's model code: RR1030FS Drive: Seated Suction motor power: 500W Brush motor power: 500W Drive motor power: 500W Operating time: approx. 4 hours Number of wheels: 3 Tires: PU (non-slip) Weight: 250kg Basic dimensions Volume Fresh water tank: 80L Dirty water tank volume: 85L Brush diameter: 510mm Overall length: 1400mm Overall width: 1030mm Overall height: 1100mm *Further technical specifications are available upon request. The ride-on scrubber-dryer is designed to be user-friendly, making the cleaning process as straightforward as possible. The intuitive control panel allows for easy control of all functions, so even inexperienced users can quickly get to grips with it. The ergonomic seat and clear view of the cleaning area allow you to work comfortably and efficiently. The large 80-liter fresh water tank and 85-liter waste water tank ensure long cleaning intervals without the need for frequent refilling or emptying. The machine is easy to maneuver and ideal for use in large areas. Of course, we usually have all spare parts in stock and can deliver them quickly should you ever encounter a problem. Should you need technical support, we have the necessary technical expertise and can also carry out repairs in our in-house workshop. We at SCHORR are happy to answer any questions you may have about our ride-on scrubber-dryer. You can reach our competent team by phone or email. We look forward to hearing from you and assisting you with your needs.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, cooling capacity: 34.54 kW (46.96 HP), type of input current: three-phase, overall weight: 404 kg, input voltage: 400 V, total width: 761 mm, total length: 1,862 mm, total height: 1,437 mm, Description: Model: MTA TAEevo TECH 121 Condition: Excellent History: Used exclusively for intermittent final testing of CNC machine tools. Never ran in 24/7 production. Location: Derendingen, Switzerland Credpfx Aoykn D Rsclsi Terms: Availability: Immediate. Logistics: Buyer arranges transport. Loading assistance available on-site.

Condition: used, Year of construction: 1996, Technical details: turning diameter: 500 mm turning length: 1500 mm turning diameter over bed slide: 290 spindle bore: 71 mm turning speed range: 3 - 2800 U/min rapid speed: 10 / 5 m/min feed speeds: 1 - 2000 mm/min Codpfx Acowwlvlelori total power requirement: 22 kW weight of the machine ca.: 3,2 t dimensions of the machine ca.: 3,0 x 1,6 x 2 m with Teach In controll R&D MTC-K PARAT toolpost 1 fixed steday dia. 100 mm 4 jaw face plate dia. 500 mm coolant attachment *

Condition: used, Year of construction: 2007, turning length 1500 mm control FAGOR 8055i/A TC centre height 230 mm greates pass round over bed 475 mm Csdev Hhv Ujpfx Aclori swing diameter over slide rest 240 mm bed width 355 mm max. workpiece weight 1500 kg spindle bore 65 mm spindle turning speed range 100-4500 U/min weight of the machine ca. 3,15 t required space 3,51 x 1,80 x 2,02 m

Condition: new, Year of construction: 2023, functionality: fully functional, cooling capacity: 366 kW (497.62 HP), type of input current: three-phase, type of cooling: air, overall weight: 3,203 kg, input voltage: 400 V, total width: 2,260 mm, total length: 5,300 mm, total height: 2,410 mm, warranty duration: 12 months, heating capacity: 349.9 kW (475.73 HP), Aircooled chiller/Heat pump LENNOX GAH370DP2M 366 kW/349.9 kW Cooling capacity: 366 kW / 104.07 tons (12/7 — 35°C) Heating capacity: 349.9 kW / 99.49 tons (40/45 —7°C) Year of manufacture: 2023 Options: Heat pump. Refrigerant circuit: 2 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 6 pcs. Danfoss DSF270A4AAA (scroll) Type of refrigerant: R32 Number of fans: 8 pcs. (EC-fans) Dimensions: 5.3x2.26x2.41 m. Weight: 3203 kg. Working hours: 63/60/76/92/95/92 h. Condition: Outlet Cjdsx Rbw Eepfx Acleri CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, This is a new machine which is manufactured in Romania by the manufacturer Emsil. Customer wishes can be taken into account depending on technical implementability and are checked in advance by the manufacturer's engineering office. Narwhal features a drilling spindle that is made of hardened, tempered and rectified alloy steel. It is mounted with preloaded oblique precision ball bearings. The machine is also equipped with a milling and boring bar which can handle exceptional power and torque. The bar is made of nitrided alloy steel and is also mounted with oblique preloaded precision ball bearings. It moves on bronze guide bushings. The clamps of both units, used for securing and releasing the tool holder cone with ISO 50 coupling, open and close automatically Rotary Turntable: The table is turned by means of a double pinion gearbox, a central rod wth bearings and hydrostatic sliding block of the centre bearing which is of a suitable size to guarantee maximum precision with large loads, even unbalanced ones. There is a recirculating ball screw slide guide system for the x-axes. Both axes are equipped with a direct measuring system. CNC Axes Control: The 9 axes of the machine are monitored at all times. The monitoring system is equipped with a 15'' TFT screen, a control panel, remote diagnostics that alert the user in case of faults, a user memory, network connectivity, remote control of the process, integrated PLC, etc. The machine is compatible with the multiple control systems such as Heidenhain, Fanuc, Siemens etc. You can choose the sizes of machining of X/Y and Z axes: from 1200 - 3500 / 1000 - 3500 / 400 - 1500mm Codpfx Aju Id H Aoclori *

Condition: like new (used), Year of construction: 2019, functionality: fully functional, cooling capacity: 528 kW (717.88 HP), type of input current: three-phase, type of cooling: air, overall weight: 3,098 kg, input voltage: 400 V, total width: 2,300 mm, total length: 4,800 mm, total height: 2,350 mm, power: 267 kW (363.02 HP), input current: 434 A, protection type (IP code): IP44, input frequency: 50 Hz, pressure (max.): 44.2 bar, Equipment: cooling unit, type plate available, Carrier cooling unit Cooling capacity: 164 - 528 kW Credpjyb E Uujfx Acloi

Condition: used, Year of construction: 2010, turning diameter 475 mm turning length 1500 mm control Fagor 8055T Revolver 8 turning diameter over slide 240 mm turning dia. in gap 710 mm length of gap 350 mm spindle passage 51 mm turning speeds 100-4500 U/min Power 7/11 KW 3-jaw chuck 250 mm steady 230 mm The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. Cedpfjyqv S Njx Acljri About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team