Laser welding system 2x 6kw with PFO and much more.

TRUMPF

Condition: ready for operation (used), Year of construction: 2005, laser power: 2,000 W, ITEC Automation & Laser AG: Gantry Portal for Coil Line with Trumpf TCF 1 Laser + GSW AG Reel MHR 2.5 / 1250 + Straightening Machine VRMA 80 / 76 + Motoman ERCS-HP20-AE00 Robot The system will remain in operation until week 35. Kjdpfxjzu Avzs Alxena The system has been continuously maintained and partially overhauled in 2022. Sale is without extraction system and platform! TECHNICAL DETAILS Trumpf TCF 1 MHR 2.5 / 1250 Wavelength: 10.6 µm Max. Output Power: 2,000 W Continuously adjustable power range: 100–2,000 W Power stability relative to rated power: ±2% Beam diameter at the output window: 26 mm Divergence angle (half angle): 0 mrad Power distribution: TEM₀₀ Pulse frequency: 10 Hz–100 kHz Marking mode frequency: 10 Hz Marking mode power: 80 W Pulse width: 10 µs–CW Reel MHR 2.5 / 1250 Load capacity: max. 2,500 kg Coil outer diameter: max. 1,250 mm Strip width: max. 600 mm Spreading range: min. 380 (480) mm Spreading range: max. 430 (530) mm Mandrel height: 1,000 mm Drive and Speed Speed: approx. 17.5 rpm Electrical drive power auxiliary drive: 1.1 kW Electrical Connection Connection voltage: 3 × 400 V Frequency: 50 Hz Noise Emission Noise level: 70 dB(A) EQUIPMENT Fixed rear edge Neutral conductor (N) and protective conductor (PE) Straightening Machine VRMA 80 / 76 Passage width: max. 100–800 mm Strip thickness: min. 0.4 mm Strip thickness: max. 1.5 mm Strip thickness at full width: max. 1.0 mm Number of straightening rolls: 7 Number of tension rolls: 2 Roller diameter: 60 mm Straightening roll spacing: 130 mm Speed: approx. 15 m/min Passing height above the floor: approx. 1,000 mm Drive type: Servo motor Electrical drive power: 2.2 kW Drive speed: 3,000 rpm Connection voltage: 3 × 400 V Frequency: 50 Hz Conductors: N, PE Noise level: 70 dB(A) Robot Motoman ERCS-HP20-AE00 Number of axes: 6 Load capacity: 20 kg Positioning repeatability: ±0.06 mm Weight: approx. 280 kg S-axis (rotation): ±180° L-axis (lower arm): +155° / -110° U-axis (upper arm): +255° / -165° R-axis (wrist rotation): ±200° B-axis (wrist bending): ±140° T-axis (wrist rotation): ±360° Speed S-axis: max. 2.96 rad/s / 170 °/s Speed L-axis: max. 2.96 rad/s / 170 °/s Speed U-axis: max. 3.05 rad/s / 175 °/s Speed R-axis: max. 6.20 rad/s / 355 °/s Speed B-axis: max. 6.02 rad/s / 345 °/s Speed T-axis: max. 9.16 rad/s / 525 °/s The height and weight of the asset must be considered when selecting the transport vehicle. A forklift is available for loading. If collection is not carried out on time, a storage fee of €20.00 per lot and day started will be charged. The fee must be paid before collection. The sale is made without any guarantee or warranty. The information on the technical data comes from the original offer. No guarantee is given for printing and measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: used, Year of construction: 2010, controller model: , _____ Knodpfx Alszv Dcloxea Description: Year of manuf. : 2010 TruDisk 3302 laser system :- TRUMPF TruDisk 3302 with a beam quality of 8 mm mrad :- Output power of 3.3 kW at the workpiece :- Laser system with 1 cavity :- Beam delivery system comprising an optical assembly for a single optical path, a fast switch (50 ms switching time) and a pilot laser including electrical control :- Integrated power supply and real-time capable control system for the evaluation and visualisation of operational data :- Fast laser power control :- TruControl 1000 control system :- Storage capacity for 199 laser programmes :- Safety monitoring in accordance with laser safety class 1, including a central safety lock :- Protection class IP54 :- 10.4" panel computer with TFT touchscreen Extension of the beam path :Plus 1 additional laser light cable output, including interface card :consisting of: :# Optical assembly on base plate with fast switch :# Beam safety switch after coupling, if the output is not connected to an LLK KUKA Roboter KR 30 HA (High Accuracy) inkl. KRC2 :- Six-axis industrial robot mechanics with articulated kinematics :- Three-phase servo drives for 6 degrees of freedom – maintenance-free and protected against overload :- Absolute position measurement :- The K-IRL programming language enables, amongst other things, a flexible programme structure, freely selectable programme/variable names, etc. :- Telediagnostics module DKP 400.1 Rotate-Tilt Positioner :- Rotation and tilting of workpiece clamping devices in relation :to the robot’s position :- Fully interpolated integration of the rotation and tilt axes :as the 7th and 8th NC axes 3D clamping plate 800 x 100 :- Demmeler System :Clamping of fixtures via 3D worktable, hole pitch 16 :mm / grid 50x50 mm 2, SW 800x100 Two-station rotary table :- Manual two-station rotary table, each side of which can accommodate one component clamping fixture :- Light-tight integration into the safety enclosure :- The fixtures are connected via two support rails each Laser Welding Technology Package :- Manual two-station rotary table designed to accommodate one component clamping fixture on each machining side :- The fixtures are connected via two support rails each :with a 16 mm diameter and 100 mm hole pattern : : Standard cabin :- Dimensions (L/W/H) 4800 mm x 7000 mm x 3200 mm :- Automatic sliding door at the front 2000 mm x 2300 mm :- 1 laser safety screen :- Cab lighting

Condition: used, functionality: unexamined, Technical specifications: Manufacturer: TRUMPF Model: Quicksharp Type: 6840-H3 Year of manufacture: 09/1986 Serial number: 524 Knjdozvyndepfx Alxea Mains voltage: 220/380 V Connected load: 1.7 kVA Control voltage: 220 V Required fuse rating: 18 A Used condition, with age-related signs of wear and visible surface corrosion.

Condition: ready for operation (used), Year of construction: 2011, controller manufacturer: SIEMENS, controller model: Sinumerik 840 D, overall weight: 12,000 kg, total height: 2,400 mm, This TRUMPF Trulaser 5030 Fiber was manufactured in 2011. A robust fiber laser cutting machine, it features a 3000 Watt laser output and a working area of 3000 x 1500 x 115 mm. Capable of cutting up to 20 mm steel, 15 mm stainless steel, and 15 mm aluminum, it operates with a Siemens Sinumerik 840 D control system. If you are looking to get high-quality cutting capabilities consider the TRUMPF Trulaser 5030 Fiber machine we have for sale. Contact us for more information. Additional equipment Kjdpszvv A Dsfx Alxena • Closed machine frame with an integrated laser unit • Torque drive combined with direct linear drives • Enclosed beam delivery via fiber optic cable • Water-air chiller for machine cooling • Integrated electrical cabinets with internal lighting • Automatic pallet changer (lengthwise installation) • Power supply through TruDisk integrated into the machine • Working area lighting • Wide longitudinal conveyor • Positioning laser diode Machine Benefits Technical Machine Benefits • Positioning accuracy: 0. 05 mm • Laser rated output: 3000 watts Extra Information The LiftMaster is included with the machine. Dimensions Machine Depth 9950 mm

Condition: ready for operation (used), Year of construction: 2013, laser power: 3,000 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, total height: 2,200 mm, This 3-axis TRUMPF TRULASER 3030 FIBER was manufactured in 2013. A robust fiber laser cutting machine with a 3 KW power capacity, it features a large working area of 3000 mm x 1500 mm. It has been well-maintained by TRUMPF, ensuring reliability and precision. A great opportunity to buy this TRUMPF TRULASER 3030 FIBER machine we have for sale. Contact us for further details regarding this fiber laser cutting machine. Machine Benefits Technical Machine Benefits • Trumpf maintenance. Extra Information Machine still under power Kedpjzvvycofx Alxona Dimensions Machine Depth 9229 mm

Condition: ready for operation (used), Year of construction: 2013, controller manufacturer: SIEMENS, number of axes: 3, This TRUMPF TruLaser 3030 (L20) was manufactured in 2013. A robust CO2 laser cutting machine, it features a Siemens control system, a laser power of 3200W, and workpiece dimensions of 3000 x 1500 mm. With a travel speed of 140 m/min, it ensures efficient operation. Consider the opportunity to buy this TRUMPF TruLaser 3030 (L20) CO2 laser cutting machine. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Working hours / laser beam on 49000 h • Longitudinal travel x-axis: 3000 mm • Cross travel y-axis: 1500 mm • Height travel z-axis: 115 mm • Travel speed: 140 m/min • Workpiece dimensions: 3000 x 1500 mm • Laser power: 3200w • Type of laser: truflow Kodpfx Aljzvu Skoxena Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2007, laser power: 4,000 W, travel distance X-axis: 3,000 mm, overall weight: 11,500 kg, total height: 2,000 mm, product length (max.): 9,800 mm, number of axes: 3, This 3-axis TRUMPF TruLaser 3030 incl. Liftmaster was manufactured in 2007. It features a powerful 4,000 W CO₂ laser with a maximum workpiece weight of 900 kg and a maximum simultaneous speed of 140 m/min. The machine offers an impressive X-axis travel of 3,000 mm and Y-axis travel of 1,500 mm. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF TruLaser 3030 machine we have for sale. Contact us for further details. Knjdpfx Aszvpumslxsa • Laser Type: CO₂ Laser • Laser Source: TRUMPF TruFlow 4000 • Laser Power: 4,000 W • Laser Wavelength: 10.6 µm • Maximum Workpiece Weight: 900 kg • Maximum Simultaneous Speed: 140 m/min • Positioning Deviation Pa: 0.05 mm • Average Positioning Scatter Band Ps max: 0.03 mm • Maximum Sheet Size: 3,000 × 1,500 mm • Max. Mild Steel Thickness: 20 mm • Max. Stainless Steel Thickness: 12 mm • Max. Aluminium Thickness: 10 mm

Condition: used, Year of construction: 2008, Technical details: tank capacity: - l percentage of cleaning: - µ total power requirement: - kw Number of filters: 5 St. filter: 576/556 x 74 x 1050 mm total pressure: 200 daPa volume capacity: 1500 m³/h filter surface area: 25 m2 Ksdoyt I Axjpfx Alxena Voltage: 460 V motor capacity: 3,3 kW rotary speed of motor: 3600 U/min frequency: 60 Hz dimensions L x W x H: 1,05 x 1,28 x 2,0 m protection class: IP 55 Filter Plates MF Series Filter plates for dust collectors of the MF series are manufactured using the durable and proven Dura-Pleat filter media and can be selected with various media properties. The filter plates stand out due to their low pressure drop, high filtration efficiency, and long service life. · Suitable for high dust loads · Excellent separation efficiency · Efficient filter cleaning thanks to flow-optimized filter head · High mechanical strength due to robust design · Optimized filter service life Filter material: polyester fleece with Teflon membrane *

Condition: used, Year of construction: 2009, Technical details: Beam Hour: unbekannt / unknown h laser capacity: 4000 W The TLF4000 resonator was installed in a Trumpf True Laser 2525: Laser power: 4,000 W (4 kW) Wavelength: 10.6 µm Beam mode: TEM01* Pulse frequency (gating): 100 Hz – 10 kHz Gas consumption (laser): CO2: approx. 1 l/h Knedpoyuvcijfx Alxea N2: approx. 6 l/h He: approx. 13 l/h Cutting gas O2: approx. 500 – 2,000 l/h Electrical power consumption: approx. 33 – 67 kW Adjustable laser power: programmable in 1% increments Laser type: CO2 laser with closed gas circuit Translated with (free version) *

Condition: used, Year of construction: 1991, Technical details: pressure: 200 t chamfer lenght: 4100 mm control: - Kedsy Alw Hspfx Alxona distance between columns: 3200 mm stroke max.: 250 mm total power requirement: 22 kW operating pressure: max. 280 bar table width: 200 mm stroke speed - idle stroke upwards: 100 mm/s stroke speed - idle stroke downwards: 100 mm/s weight of the machine ca.: 18.000 t dimensions of machine: 5,0 x 2,7 x 3,0 m