CNC turning and milling center

Takisawa TMM 250 M3

Condition: excellent (used), Year of construction: 2021, operating hours: 7,950 h, functionality: fully functional, Vertical Turning Center / Vertical Lathe Manufacturer: EMAG Model: VL6 (FANUC) Year of Manufacture: 2021 Operating Hours: approx. 7950 Giedpfx Ajwzwu Iocfou Total weight : 10,5T Main spindle 28,5 KW Power at 40/100% ED 41/28,5KW Torque at 40/100% ED 491/340 Nm Full power at spindle speed 800 rpm Max. speed 3100 rpm Slide Unit X, Z HP Turret Drive Unit for Driven Tools (C362) with internal coolant supply to the tool Max. speed: 9600 rpm Full power at 3000 rpm Torque at 100% ED 33/Nm/10,4 kW Torque at 40% ED 44/Nm/13,8 kW Torque at 10% ED 56/Nm/17,6 kW Tool holder unit for driven tools: 12 x BMT65 Component storage and transport system conveyor, O-Type (GO 240") carrier prism system for 10 components Workpiece height : max. 250 mm Workpiece weight: max. 40 kg Set (10 pcs) of carrier prisms for workpiece diameter: 150 - 300 mm Blow-off Device for Workpiece and Clamping Device (Pick-Up) Coolant Supply: 15 bar Coolant pump capacity: approx. 80 l/min at 15 bar Cooling unit (6.5 kW, water - air) Coolant double filter, manually switchable Filtering fineness 100 μm, with electric and mechanical contamination indicator Swarf conveyor, chain type - rear discharge Hinged belt version: rear discharge Chip discharge height 1,100 mm (with integrated coolant tank, capacity approx. 500 l) Emulsion Mist Extraction: Extraction rate approx. 800 m³/h Rinsing gun Workpiece Measurement with Probe Probe blow-off Tool life monitoring (sister tool management) 3-Color Signal Tower Quick-Jaw changing chuck SMW autoblok KCNS-N400-128 max. = 3500 rpm Set of hard base jaws Set of soft top jaws Software Package Operating Manual / Maintenance Manual

Condition: good (used), Year of construction: 2006, Used lathe by OKUMA - Model: LT 200-M TwinStar Giedpfx Acjv S Su Sjfsu - Year of manufacture: 2006

Condition: excellent (used), Year of construction: 2014, turning length: 700 mm, travel distance X-axis: 205 mm, travel distance Z-axis: 700 mm, spindle motor power: 22,000 W, total height: 2,800 mm, total length: 6,000 mm, total width: 3,900 mm, overall weight: 9,800 kg, Complete machining with twin spindel, upper and lower turrets Kitagawa 3 chuck left and right Tool holders with driven tools axial and radial Large jaws cabinet with inserts OGL Gantry loader with ca 10 Kg load capacity Chip conveyor Paper Filtration Pressure Tank Max. turning Ø: 400mm X-Axis: 205mm Z-Axis: 700mm Spindle bore: 62mm Speedrange: 6000Rpm Spindle power: 22kW Subspindle speeds: 6000Rpm Subspindle bore: 62mm Subspindle power: 15kW Gedpfxeyn Em Rs Acfjiu ATC / revolver: 16 Speed live tools: 6000Rpm Positions lower revolver:16 Speed live tools: 6000Rpm Power live tools: 7kW Chip conveyor: yes Tool eye: yes Length: 6000mm Width: 3900mm Height: 2800mm Weight: 9800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2002, max. wheel diameter 130 / 80 mm gear width 180 mm max. module 4 min. module 0,5 spindle turning speed - stepless 300 - 3000 U/min control Siemens 840 D x-travel 200 mm y-travel 170 mm z-travel 250 mm milling head -swivable +/- 45 ° table diameter 168 mm Gedpfsxlug Hox Acfsiu table hole 65 mm clamping length max. 245 mm table turning speeds 0 - 1000 U/min total power requirement 51 kW weight of the machine ca. 9,2 t dimensions of the machine ca. 4,5 x 4,0 x 3,2 m

Condition: used, Year of construction: 2002, Technical details: max. wheel diameter: 130 mm gear width: 170 mm max. module: 3 min. module: 0,5 total power requirement: 48 kVA weight of the machine ca.: 9 t dimensions of the machine ca.: 7,64 x 3,14 x 3,25 m For technical data, see PDF-File enclosed Gisdpfx Acewdyx Usfou *

Condition: used, Year of construction: 2001, Technical details: max. wheel diameter: 200 mm gear width: 50 mm max. module: 6 table diameter: 168,14 mm boring diameter: 65,532 mm weight of the machine ca.: 11 t table turning speeds: 0-1.000 U/min length of stroke min./max.: 0-70 mm no. of strokes: 180-1.800 Stück Gedpexz Avbofx Acfeiu This machine can be used to make tandler gears. However, for helical gearing, a helical guide is also required. *

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, TAKISAWA TM-3000Y2 FANUC 0iTF PLUS. TOTALLY AS NEW. BUILT 2023 CNC MULTITASKING LATHE WITH UPPER & LOWER Y-AXES. 8 INCH + 6 INCH STANDARD CHUCK SIZE WITH:- Y-AXIS TRAVEL +45 -45 MM - LOWER TURRET (Y2 AXIS) Y-AXIS TRAVEL +45 -45 MM - UPPER TURRET (Y1 AXIS) CHIP CONVEYOR RIGHT SIDE DISCHARGE HINGE TYPE (MORETECH JAPAN) AIR BLOW SYSTEM - RH SPINDLE WORK PHASE POSITIONING FUNCTION (C-AXIS TORQUE SKIP FUNCTION) COOLANT DELIVERY PIPE ABOVE THE SPINDLE - LH & RH SPINDLE COOLANT PUMP - 400W - 3 OFF OIL SKIMMER (OIL / WATER SEPARATOR) OIL SEPERATOR BOX HYDRAULIC PRESSURE SWITCH LED LIGHTING AUTO LUBRICATION SYSTEM AND COLLECTOR MACHINE MANUALS & OPERATOR HANDBOOKS TURRET MOUNTED MACHINE LEVELLING PLATE AUTO POWER OFF SYSTEM TRANSFORMER - 415V / 3PH / 50HZ STANDARD TOOLING PACKAGE TURRET COVER (6 EA) X 2 SERVO TURRET (LOWER) Y2 AXIS - 12 STATION WITH DRIVEN TOOLS SERVO TURRET (UPPER) Y1 AXIS - 12 STATION WITH DRIVEN TOOLS 6" 3-JAW THRU-BORE HYDRAULIC CHUCK ~ KITAGAWA B-206 RH SPINDLE 8" 3-JAW THRU BORE HYDRAULIC CHUCK (KITAGAWA BR-08) - LH SPINDLE DIRECT DRAWING DIMENSION INPUT HELICAL INTERPOLATION FUNCTION RAKU-RAKU TOOL MONITORING SYSTEM 9 BAR HI PRESS COOLANT PUMP (NIHON) 2 OFF CALL LAMP (3 COLOUR) BAR FEEDER INTERFACE - MULTI BAR MAGAZINE TYPE REMAINING BAR DISCHARGE DEVICE UNLOADER WITH PARTS DISCHARGE CONVEYOR QUICK TOOL SETTING DEVICE - MANUAL TYPE BOTH TURRETS AXIAL DRIVEN TH, ER25 OUTPUT, 6000 RPM, 1:1 RATIO, EXT COOLANT - 4 OFF RADIAL DRIVEN TH, ER25 OUTPUT, 6000 RPM, 1:1 RATIO, EXT COOLANT - 1 OFF MACHINE FEATURES TWIN SPINDLE, TWIN TURRET Y-AXIS CNC TURNING CENTRE. 2 OFF 12 STATION HIGH ACCURACY SERVO TURRETS LEFT HAND SPINDLE - 4,500 RPM RIGHT HAND SPINDLE - 6,000 RPM UPPER & LOWER TURRETS - 6,000 RPM LIVE TOOLING SPEED UPPER TURRET Y1-AXIS (+ - 45 MM) LOWER TURRET Y2-AXIS (+ - 45 MM) 8” + 6” STANDARD CHUCK SIZE Gedexrpnrjpfx Acfjiu MACHINE CAPACITIES Standard Turning Dia. 215 MM Maximum Turning Dia. 215 MM Maximum Turning Length 620 MM Bar Capacity Left Spindle Ø 65 MM Bar Capacity Right Spindle Ø 42 MM AXIS TRAVELS Upper Turret Travel X1 190 / 90 MM Upper Turret Travel Y1 90 (± 45) MM Upper Turret Travel Z1 660 MM Lower Turret Travel X2 190 / 90 MM Lower Turret Travel Y2 90 (± 45) MM Lower Turret Travel Z2 660 MM Travel A (RH Spindle) 660 MM LEFT SPINDLE Chuck Size Ø (8”) 203 MM Spindle Speed (RPM) 4,500 RPM Min. Indexing Angle (C-Axis) 0.001 DEG Spindle Nose A2-6 Spindle Bore Ø 77 MM RIGHT SPINDLE Chuck Size Ø (6”) 152 MM Spindle Speed 6,000 RPM Min. Indexing Angle (C-Axis) 0.001 DEG Spindle Nose A2-5 Spindle Bore Ø 53 MM TURRETS - UPPER & LOWER Number of Tools (Upper & Lower) 12 Turning Tool Shank 25 MM Boring Bar Shank Diameter 32 MM Milling Shank Diameter 16 MM Driven Tool Speed 6,000 RPM Number of Driven Tools (Upper & Lower) 12 FEEDRATES Upper Turret Rapids X1 / Y1 / Z1 20 / 12 / 40 M / MIN Lower Turret Rapids X2 / Y2 / Z2 20 / 12 / 40 M / MIN Rapid Traverse Speed - A (Right Spindle) 40 M / MIN MOTORS Spindle Motor - LH 15.0 / 11.0 KW Spindle Motor - RH 11.0 / 7.5 KW Turret Driven Tool Spindle Motor 5.5 / 3.7 KW Axis Feed Motors - X1 / Y1 / Z1 2.5 / 2.5 / 3.0 KW Axis Feed Motors - X2 / Y2 / Z2 2.5 / 1.2 / 3.0 KW Axis Feed Motor - (A) 2.5 KW SUPPLY 35 KVA MACHINE L 4,254 MM W 2,460 MM H 2,230 MM 8,300 KGS

Condition: ready for operation (used), Year of construction: 2023, spindle motor power: 22,000 W, spindle speed (max.): 3,000 rpm, travel distance X-axis: 293 mm, travel distance Y-axis: 130 mm, travel distance Z-axis: 1,350 mm, total height: 2,315 mm, total width: 2,067 mm, overall weight: 8,000 kg, controller manufacturer: FANUC, controller model: 0i-F, product length (max.): 4,530 mm, number of axes: 4, This 4-axis DN SOLUTIONS 3100 LY turn-mill centre was manufactured in 2023. It features a maximum turning diameter of 420 mm and a turning length of 1285 mm. The machine is equipped with a 12-inch main spindle chuck and a rapid traverse speed of 30 m/min in both X and Y axes. If you are looking to get high-quality turning capabilities, consider the DN SOLUTIONS 3100 LY machine we have for sale. Contact us for further details. • Main spindle chuck size: 12 in (306 mm) • Bar capacity: 102 mm • Rapid traverse: X 30 m/min; Y 30 m/min; Z 10 m/min • Max turning diameter: 420 mm • Max turning length: 1285 mm • Driven tool speed: 5000 rpm • Tooling: 12 stations, BMT65 • Guideway type: Box guideways • Axes/features: C-axis, Y-axis • Electrical: 380 V, 3-phase, 50/60 Hz • Electrical ratings: 55.02 kVA; Full load current 83.60 A; Short circuit capacity 10 kA; Interrupting capacity 5 kA Additional equipment Godpfx Aeyu Rn Tjcfjiu • Optional: • 1 pc. External turning tool post BMT65 25x25 single left, right (500-0679) • 3 pcs. External turning tool post R/L high (500-6960) • 1 pc. Facing tool post BMT65P/SQ 25 mm (500-0834) • 3 pcs. Boring bar holders (ID: 50 mm) BMT65P (500-5555) • 1 pc. IK cover (500-0837) • 1 pc. Reducing sleeve set • 1 pc. Reducing sleeve set (500-0808) • 1 pc. Adapter set PRECI-FLEX Er32 (BMT 65P) (500-0500) • 12 pcs. Covers BMT 65 (500-1931) • 2 angled externally cooled Eppinger AGWs • 2 straight externally cooled Eppinger AGWs • Chip conveyor (hinge belt conveyor). Price on request • Machine is delivered with standard basic package: Turret fully equipped, base holder includedMachine is a Showroom machine that never has been in production. Like new Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 1,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 1,000 mm, total height: 3,280 mm, overall weight: 24,000 kg, spindle speed (max.): 12,000 rpm, tool weight: 25,000 g, number of axes: 4, This 4-axis Okuma MA 600 HB was manufactured in 2011, featuring a robust horizontal machining center design. It boasts X, Y, and Z axis travels of 1,000 mm, 900 mm, and 1,000 mm respectively, and a maximum spindle speed of 12,000 rpm. The machine includes a high-capacity 150-tool chain magazine with rapid tool change times. Consider the opportunity to buy this Okuma MA 600 HB horizontal machining center. Contact us for more information about this machine. • Spindle center to table surface: 50 to 950 mm • Spindle nose to pallet center: 70 to 1,070 mm • Table / Pallet • Max rotation dimensions: 1,000 × 1,000 mm • Continuous table positions: 360,000 • Pallet change time: 7 sec • Pallet type: MAS perforated • Cooling through spindle: 20 bar • Compressed air pressure: 46 bar • Feed • Cutting feedrate: 60,000 mm/min • Positioning accuracy X-Y-Z: 0.004 mm • Repeatability X-Y-Z: mm • Tooling / Magazine • Tool change time (tool/tool): 1.9 sec • Tool change time (chip/chip): 4.4 sec • Tool selection: random • Max tool diameter (non-adjacent): 240 mm • Floor space: 3.38 × 6.11 m • Installed power: 50 kVA • Machine features • Work area shower wash system: Yes Gisdpfex D Hzyex Acfeu • Presetting at table edge: Yes • Provision for probe / zero offset: Yes Additional equipment • Chip conveyor: Mayfran Dimensions Machine Depth 3380 mm

Condition: good (used), functionality: fully functional, Year of construction: 2019, operating hours: 4,515 h, load capacity: 18,000 kg, lifting height: 4,500 mm, load center: 1,200 mm, fuel type: diesel, mast type: triplex, power: 168 kW (228.42 HP), motor manufacturer: Cummins QSB6.7, fork carriage width: 2,600 mm, fork length: 2,400 mm, fork width: 260 mm, fork thickness: 110 mm, tire condition: 70 %, front tire size: 14.00-24, rear tire size: 14.00-24, overall weight: 33,540 kg, color: blue, Equipment: CE marking, air conditioning, cabin, centralized greasing system, pallet forks, sideshift, === KEY SPECIFICATIONS === Year of manufacture: 2019 Operating hours: 4,515 h Max. lifting capacity: 18,000 kg Max. lifting height: 4.5 m Mast type: Triplex Fork length: approx. 2,400 mm Sideshift fork carriage: Yes Drive: Diesel Transmission: Automatic (powershift) Cabin: Enclosed Heated cabin: Yes Tyres: Pneumatic Stabilisers: No Engine manufacturer: Cummins QSB6.7 Emission class: Stage IV / V Weight: 33,540 kg CE certification: Yes === HIGHLIGHTS === Carefully selected from reliable sources with verifiable history CE certification and full documentation included Ready for immediate transport and operation Extensive technical documentation available Heavy-duty 18-ton diesel forklift Triplex mast with free lift Sideshift fork carriage Comfort operator cabin Hydrodynamic powershift transmission Oil-cooled wet disc brakes Hydraulic servo steering Continental pneumatic tyres Rear view camera system Ideal for heavy industrial handling, steel, concrete and port logistics. === CONDITION === Excellent working condition – fully inspected, serviced and tested by certified professionals. Inspection available upon request. Tyres in good condition (approx. 70%). Machine ready for immediate work. Gsdpfjyid Iyox Acfeiu === LOCATION & PRICE === Located in Sittard, the Netherlands. Worldwide delivery available. Price on request (EXW / excl. VAT). Reliable machines from first owner with full service history and professional technical support. Benefit from one of the largest European stocks of new and used machines. All machines are fully inspected, CE certified and ready for immediate use. Spare parts and professional assistance available upon request. === DELIVERY === Crane loading available on request for smooth transport during shipment. Flexible shipping options tailored to your destination and logistical preferences. All transports are professionally handled by the Collé Rental & Sales logistics team.