Press brake

STILMEC90

Year of construction: 2009, condition: new, Belt dimensions: 2000x100 mm Belt speed: 30 m/s Angle adjustable from 30 to 90° Lsdpfjx Davox Am Torn Power: 3 kW, 4000 V, 50 Hz Weight: 200 kg Rollers for grinding reamers: 3/4"; 1/2"; 1"; 1 1/4"

Condition: excellent (used), Year of construction: 1992, Manufacturer EVG Type TSD 7-25 Machine No. 958 Year of manufacture 1993 Working direction L > R Beam types KT 8… Beam height (mm) 90-250 Carrier length min. (mm) Lrjdpewp Ilyefx Am Ten max. (mm) 14,000 Fixed lengths: Yes Cutting pitch (mm) 100/200 Spool unwinder (pcs.) 5 LAR: Yes Wire diameter - 5-12 mm smooth/ribbed Diagonal - 4-7 mm smooth / ribbed Stack height max. (mm) - 500

Condition: used, Year of construction: 1983, Used machine Year of manufacture: 1983 Lodpfxswka T Se Am Tjrn Condition: fully checked and serviced, including new feed belt Equipment and technical data: - Including combination unit with contact roller and sanding pad - With height-adjustable contact roller for calibration - With air-cushion pressure pad controlled by the workpiece - 4-way adjustable grit compensation - With pneumatic belt tensioning device - With rotating cleaning brush on the outfeed side of the machine - Belt oscillation via photoelectric sensor for automatic monitoring and regulation of lateral belt alignment, ensuring uniform belt wear - With roller table at the infeed - With digital display unit for the motorized workpiece thickness setting - With additional veneer sanding pad - Including 2x spare sanding pads - Sanding width: 1350 mm - Sanding belt length: 1900 mm - Workpiece height: 150 mm - Main motor: 15 kW - Infinitely variable feed speed: 2.5 - 12.5 m/min - Extraction ports: 2 x 200 mm Dimensions: approx. 2300 x 2000 x 2300 mm Weight: approx. 2300 kg Availability: short-term Location: 63934 Röllbach

Condition: good (used), Year of construction: 1984, Overhead crane, crane, electric hoist, manual trolley, trolley, crane trolley, crane trolley, crane trolley, trolley, girder trolley, monorail trolley, hoist -Manufacturer: Abus, crane chassis with electric cable winch Ledpfx Ameu I Hpao Torn -Cable pull: Type GM1032FD -Load capacity: 3200 kg -Main stroke/fine stroke: 5/0.7 m/min -Hook path: 6.0 m -Roller spacing: 1400 mm, dimensions see photos -Drive system: Abus -Accessories: Connection cables, without crane operation -Transport dimensions: 1550/1180/H530 mm -Weight: 512 kg

Condition: used, Year of construction: 2007, Technical details: Lredpfex A S Rdex Am Tjn pressure: 225 t chamfer lenght: 4100 mm height of stroke: 400 mm throat: 250 mm dayligth: 917 mm total power requirement: 30 kW dimensions of the machine ca.: 5500 x 2270 x 3310 mm weight of the machine ca.: 22 t

Condition: reconditioned (used), Year of construction: 1994, Min.-max. wire dia. 6 to 14mm (.236″ to .551″) Flying shear (5) indexing rotary arbors (4) pre-feed rolls 80 to 120 mts/min Max. cutoff lgth: 15 meter track Indexing wire/rod collector 30kW (40HP) AC motor Hydraulick motor: 15 kW (20HP) Operators control panel; 380V- 50 cycle – 3ph PLC Control SIMENES S 5 3 vertical payoff units Completely refurbished machine Lrodefkmr Sepfx Am Ton

Condition: good (used), Year of construction: 1969, Pneumatic adhesive press, Maximum pressure: 10 bar, Adhesive bar with heating, Adhesive surface: 550 x 40 mm, Ljdpfed Dxqbsx Am Tjrn Infinitely adjustable temperature setting for the lower and upper adhesive bars from 0 to 300 degrees Celsius, Infinitely adjustable adhesive dwell time, Drive power: 5 kW, 380 volts, 50 Hz, Two-hand operation with SIEMENS control. Pressure build-up via articulated lever, Maximum opening distance: approx. 30 mm.

Year of construction: 2006, condition: excellent (used), machine/vehicle number: MBMA-GI, 1x ABUS wire rope hoist Crane hoist 6300KG 6.3to GM2063H6-201.41.063 E160 4 pieces available Payload 6300KG / 6.3t payload / lifting load - 4 strands Ledovbck Aopfx Am Tsrn with 2 lifting speeds, lifting height approx. 6m, track width of the lifting gear approx. 30cm (+- a few cm adjustable) with control bottle and connection plug for the power supply Weight complete approx. 400 kg, connection to 400V 50Hz Very good condition, see pictures Item location is 75053 Gondelsheim See pictures

Condition: used, Year of construction: 2013, SCHNELL Optibat 100/3/12 Cutting Bench This cutting bench features 3 tracks. Length of 12 meters. It can cut materials up to 40 mm in thickness. Lrodpfjvtp Uxox Am Tjn Manufactured in 2001, it was revised in 2013. Number of tracks: 3 Length: 12 m Materiel Thickness: Cut up to 40 mm

Condition: good (used), Lifting table, lifting platform, lifting platform, car lift Lsdpodbfxksfx Am Tjrn -Manufacturer: Nussbaum -Load capacity: approx. 1000 kg -Foot dimensions: 740 x 420 mm -Max. stroke: approx. 1600 mm -with control -Dimensions: 3200/1930/H450 mm -Weight: 494 kg