CNC MILLING MACHINE

SORALUCE TA-20

Year of construction: 1985, condition: ready for operation (used), Table dimension: 1435x460mm, T-groove number/ width/ distance: 5/ 16/ 80mm, controls: TNCi-120, length: 1435mm, width: 2330mm, height: 1648mm, weight: 3,1t, with documentation, accessories are available, no defects known, an inspection is possible. Ndsdpfx Aolbmupef Sof

Condition: reconditioned (used), Year of construction: 2009, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 3,500 rpm, workpiece weight (max.): 8,000 kg, overall weight: 13,500 kg, Equipment: rotational speed infinitely variable, x-travel 3.000 mm y-travel 1.000 mm z-travel 1.000 mm control iTNC 530 HEIDENHAIN table-size 3.230 x 1.050 mm table load 8,0 t spindle taper ISO 50 tool change unit 24 Pos. spindle turning speed range 30 - 3.500 U/min drive capacity - spindle motor 25 kW feed stepless 1 - 5.000 mm/min rapid traverse 10,0 m/min chip conveyor Spiralförderer voltage 380 V total power requirement 35 kVA weight of the machine ca. 13,5 t dimensions of the machine ca. 7,40 x 3,65 x 3,60 m Nedpfevlzznox Af Sjdf hydraulic power unit 1,40 x 0,50 x 0,60 m 0,45 x 0,70 x 0,85 m - Serial No.: VH-30041 - Maschine ON 23.724 h - Spindel ON 7.968 h - CNC-Control: iTNC 530 HEIDENHAIN - Universal Milling Head (Huron-Type), manual - 2x Screw type chip conveyor at front and back of table - Oil chiller unit - Y-Axis guitde ways with new TURCITE - Ball screws and bearings in X/Y/Z axis renewed

Condition: ready for operation (used), Year of construction: 1995, Mostana 1M63 x 3000mm Gap Bed Centre Lathe Max’ distance between centres 3000mm Max’ swing Over Bed 700mm Max; swing over cross silde 350mm Max’ swing in gap 900mm Spindle Bore 105mm Spindle Speeds 10-1250 rpm Spindle Motor 15kW Cross slide travel 400mm Year 1995 Machine complete with: Sony LH70 2 axis Digital Readout Interlocking chuck guard Nsdpfx Ajwf Sfvjf Ssdf Taper turning through compound slide 500mm 4 jaw chuck 390mm 3 Point fixed steady Rapid power traverse 4 way tool post Change gears coolant For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #78739 Machine Serial Number: 1688 Cost: £14,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Year of construction: 2002, condition: used, diameter 180 mm workpiece length 0 mm work piece width 1350 mm total power requirement 65 kW Ndsdpfx Afjt Hw Shj Sof weight of the machine ca. 7.500 kg dimensions of the machine ca. m

Condition: used, Year of construction: 2016, operating hours: 7,993 h, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, overall weight: 4,500 kg, Control Njdpfx Afex Ivumo Sjdf SIEMENS CELOS 840SI OPERATE MULTI TOUCH Hours POWER ON 18,527 h SPINDLE ON 7,993 h Spindle speed 14,000 rpm Magazine 30 slots Accessories - Measuring probe TS649 - Chip conveyor - Transformer

Condition: new, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 800 mm, feed rate X-axis: 30,000 m/min, feed rate Y-axis: 30,000 m/min, feed rate Z-axis: 30,000 m/min, table length: 1,900 mm, table width: 1,100 mm, spindle speed (max.): 6,000 rpm, table load: 4,000 kg, position of the milling head: Vertikal, torque: 1,356 Nm, spindle nose: SK 50 - DIN 69871A, Equipment: rotational speed infinitely variable, BRAND NEW GANTRY MILLING MACHINE Control and Motors: HEIDENHAIN TNC 640 Digital Path Control HEIDENHAIN Package (motors, measuring systems, electronic handwheel) Spindle Performance: Maximum spindle motor power: 30 kW ICS: Internal coolant supply, 70 bar Additional Equipment: Tool changer with double gripper, 60 positions Dual worm conveyor (longitudinal) Hinged belt swarf conveyor (transversal) Preparation for 4th axis (rotary table) Full enclosure, closed at the top Accuracies: Positioning accuracy: ± 0.025 mm Repeatability: ± 0.020 mm Only inquiries from Germany will be answered. Njdpfxoq Ixc To Af Sodf

Condition: ready for operation (used), Pressing force: 1600kN, throat depth: 450mm, installation height: 560mm, ram stroke: 8-160mm, controls: SCHMERSAL SEPG 05.3.2.0.22/ 95, weight: 16.2t, including documentation. Nodpohz Ua Sjfx Af Sjdf

Condition: new, Center height: 250 mm Swing diameter over slide: 350 mm Swing diameter in the bend: 695 mm center width: 1500 mm spindle nose: DIN 55029, Camlock, size 6 bed width: 305 mm cross slide travel: 272 mm top slide travel: 155 mm spindle bore: 80 mm Speed range, infinitely variable: (3) 30 - 2200 rpm Whitworth thread: (45) 2 - 72 TPI Metric thread: (39) 0.2 - 14 mm Diametrical thread: (21) 8 - 44 D.P.I. Module Thread: (18) 0.3 - 3.5 Module Longitudinal feeds: 0.04 - 1.00 mm/rev face feeds: 0,02 - 0,50 mm/rev motor power: 5,5 kW dimensions LxWxH, approx.: 2900 x 1175 x 2040 mm Weight, approx.: 2,200 kg Features: - Toolmaker accuracy - Infinitely variable speed control (3 preload stages) - Finely balanced main spindle - Stable machine bed with hardened and ground guides - One-piece cast base frame - Adjustable precision taper roller bearings in the main spindle - Easy-to-operate feed gear with large feed range running in closed oil bath. - Low maintenance central lubrication - Removable bridge. - CE Equipment: - 3-axis digital display (resolution 0.005 mm) - frequency converter - Machine stand with high splash guard rear wall and integrated lighting - Chip tray can be pulled out to the front - 3-jaw lathe chuck - Fixed steady rest - Moving steady rest - Micrometer bed stop - Oil cooler - Two emergency stop pushbuttons and foot pedal with electric braking device Ndodpfxsgt E Ils Af Sef - Limit switch protected chuck, rotating steel holder protection and cover of the lead and pull spindle according to the European safety standards CE - Coolant device - Fixed center punch - Reducing sleeve for main spindle - Operating tool in tool box

Condition: used, Year of construction: 1973, spindle diameter 130 mm x-travel 3000 mm y-travel 2000 mm total power requirement 4,5 kW weight of the machine ca. 30 t Spindle Ø 130 mm Spindle taper SK 50 Working range: X = column, longitudinal 3,000 mm Y = headstock, vertical 2,000 mm Z = spindle stroke 1,000 mm Lower table 3,300 x 2.400 mm Max. weight on table 10 tons/m² Min./ max position of work spindle above table 770 / 2,770 mm Feeds 0.9 - 2,000 mm/min Quick feed for headstock and column 5,000 mm/min Quill feed 0.5 - 1,200 mm/min Speed range, partially infinitely variable 4.5 - 1,250 rpm Weight, approx. 30,000 kg Accessories / Special Features * HEIDENHAIN Digital Display for 3 axes. * Hardened guideways. * Ball screw spindles. * Infinitely variable spindle speeds and feeds. Feeds can be individually driven with motor. * Moving operating platform. * Hanging control panel. * Manual operating control. * Platform. * Hydrostatics in the column displacement. * Mounting plate 3,200 x 2,500 mm, planed, with t-slots. * Top table approx. 1,400 x 2,600 x height 900 mm, one face is handled. Ndodpfxet Hwt Sj Af Sjf * Hydraulic clamping of column and slides. * Motor driven tool clamp. * Lots of accessories, including tool holders with and without tools, separate chip extractor, clamping aids, 1 angle plate, and other plates. Lots of other accessories. This is a strong machine which is very suitable for heavy cuts and therefore ideal for the machine tool industry and for tool manufacturers. Condition : Good. Machine can soon be inspected under power. Delivery : Ex stock as inspected Payment : Net, after conclusion of contract Thank you for your interest. We have other horizontal borers on stock. Please let us know what you need.

Condition: used, Table unit from a DROOP & REIN portal milling machine Clamping plate with T-slots made of cast steel gray cast iron Table unit with clamping plate and very solid guideway Table clamping surface 5500 x 2000 mm Travel of the table clamping plate approx. 3100 mm Table height 1050 mm Table load: max. 20 tons Ball screw: Ø 100 mm Thread pitch: 20 mm (single-start) - Processing table guided very stably on the bed - Metal telescopic guideway cover - comes from a DROOP & REIN portal milling machine - Longitudinal table movement via ball screw and SIEMENS servo motor - Clamping surface with 11 T-slots 28 mm - Drive via SIEMENS 1FT6134-6AB71-1AG2 servo motor with IC200448S/R encoder (RN 000 B25) Total length 9500 mm Width 2000 mm Overall height 1050 mm dead weight 28 ton. Ndedjthuzpjpfx Af Sjf good condition