Portal milling machine

Soraluce FR-6000

Condition: new, Year of construction: 2025, functionality: fully functional, The CNC BAYKAL Hybrid Press Brakes combines all the benefits of both hydraulic and all-electric press brake systems into one. If you’re looking for press brakes that are fast, accurate, and energy-efficient, BAYKAL is the way to go. The CNC BAYKAL Hybrid Press Brakes can significantly save energy, save fuel, improve bending efficiency, reduce the risk of oil leakage, reduce installation costs, extend the service life of consumables, improve bending accuracy, reduce noise, and improve the working environment. The CNC BAYKAL hybrid press brakes system are designed with an individual electro-hydraulic servo drive system and servo pumps to control the for each of the left and right cylinders. The servo motor controls the output flow of the oil pump according to the program setting, and then controls the movement speed and position positioning of the slider, and there is no throttling phenomenon in the whole process. Therefore, all the energy output by the oil pump is supplied to the left-right oil cylinder. This control method does not have any energy loss, and the energy-saving effect is very prominent. With this system the hydraulics run on demand when the foot pedal is activated, rather than having a pump running continuously. This results in lower energy usage than a standard hydraulic machine as well as faster cycle times and extremely high accuracy. The flow and pressure of Y1 and Y2 oil cylinders are respectively controlled by two sets of servo bidirectional pump systems, and the oil in the upper chamber of the oil cylinder is directly pumped into the lower chamber of the oil cylinder through the oil pump to realize the lifting of the beam. The reverse rotation of the oil pump pumps the oil in the lower chamber of the oil cylinder directly into the lower chamber of the oil cylinder to realize the pressing and bending of the upper die. Chsdpfx Aorq D Nioitoa Applicable between from 100 Tons to 1250 Tons, the synchronization of the left and right of the upper beam of the CNC BAYKAL hybrid press brakes is controlled separately by two sets of servo bidirectional pumps.

Condition: used, Manual lever lathe SCHAUBLIN Type 102 Precision mechanic lathe Machine no. 208322 Year of manufacture: approx. 1970 Total bed length: 650 mm Center height over bed: 102 mm Chodsw Iq Umepfx Aitea Center height over carriage: 53 mm Medium spindle speed: approx. 2,800 rpm (3 speed stages) Drive motor: 0.37 kW, 2800 rpm Power supply: 380 Volt, 50 Hz - Manual lever parting and grooving slide with precisely adjustable stops - Tool holder with precise height adjustment - Collet chuck device (only one collet included) - Speed change by shifting the drive belt Space requirement with stand: L x W x H 1150 x 600 x 1200 mm Weight with stand: 130 kg Good condition

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, controller manufacturer: Cybelec, controller model: Cybtouch 12, working width: 6,000 mm, bending force (max.): 300 t, control type: CNC control, number of axes: 4, Equipment: CE marking, emergency stop, european tool clamping system, safety light barrier, Used 6metre x 300ton Adira Cnc Press Brake - Hydraulic Pressbrake 300 Ton 6000mm bending Length Back gauge: X and Z Axis Cjdpfjwu Ua Usx Aitoha Upgraded touch screen control Cyblec CybTouch 12 Control System Year of Manufacture - 2005 Good service history including rebuilt ram cylinders, rebuilt crowning and upgraded control system Euro tool clamping

Year of construction: 1972, condition: used, machine/vehicle number: WIT, Technical data: 1x Vetter / Demag column-mounted slewing jib crane NL 250KG with Demag chain hoist Payload at full radius 250KG / 0.25to payload Several cranes available (7 pieces) Height: approx. 3.75-4m Outreach: 3+3.9m Weight complete approx. 700KG Chsdpforwkbuex Aitoa incl. cable towing, undercarriage etc Swivel range 360°, connection to 400V 16A Optionally also available with 250KG chain hoist Crane is disassembled and immediately available Item location is 75053 Gondelsheim Further cranes are available, lifting capacity 80-5000Kg, please inquire See pictures Shipping by forwarding agent or collection by appointment only

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 1,067 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller manufacturer: HURCO, controller model: MAX5, overall weight: 6,850 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, number of axes: 3, This 3-axis Hurco VMX 42i was manufactured in 2018 and features X, Y, and Z travels of 1067 mm, 610 mm, and 610 mm respectively. It boasts a maximum spindle speed of 12000 rpm. If you are looking to get high-quality milling capabilities consider the Hurco VMX 42i machine we have for sale. Contact us for more information about this machine. • Tool magazine capacity: 30 tools • Spindle hours: approx. 7,800 h • Machine weight: approx. 6,850 kg • Total power requirement: approx. 28 kVA • Internal coolant system Additional equipment • Chip conveyor Software Features Adaptipath: Trochoidal milling for higher removal rates, controlled engagement, and residual material detectionDialog / NC Mix: Allows mixing of Dialog and NC programsNCPP (Industry Standard Software): • ISNC extended NC mode for FANUC compatibility (FANUC 0) • Parameter and MACRO programming • Subprogram technology for NC modeUlti-Motion: • Dynamic Lookahead (up to 10,000 blocks) • Improved surface quality via "Motion Control Technology" • Reduced cycle times and machine wearStandard Features: • Simulation graphics • Pocket milling with islands • Synchronous tapping (without compensation chuck) Hardware Components & Accessories • Cooling & Chips: • High-pressure coolant system (Through-Spindle Coolant) at 20 bar (Emulsion type) • Spindle cooler Cedpfxey Tw R Ho Aiteha • Standard coolant system with spray gun • Chip conveyor and flushing system for chip removal • Chip splash guard cabin • Tooling: Integrated hydraulic tool clamping system • Workspace: • LED machine light • Signal light for operating status Technical Specification Taper Size SK 40

Condition: used, Year of construction: 2011, pressure: 400bending length: 4050column width: 3400electric current: 37,5 KWweight approx.: 25.000messurements (LxWxH): 5750 x 2110 x 3440STOCK CLEARANCE – UNBELIEVABLE PRICE! CNC Press Brake – DURMA AD-S 40400 (4 m x 400 tons)(Original price approx. EUR 170,000) Technical Specifications:Manufacturer: DURMA Model: AD-S 40400 Year of manufacture: 2011 Bending length: 4,050 mm Pressing force: 400 tons Axes: Y1, Y2, X, R + CNC-controlled crowning Motor power: 37 kW Features & Equipment:CNC crowning system, motorized adjustment via control Upper tool: 1010/A/75°, segmented and gooseneck-style Die: Multi-V die Backgauge: CNC-controlled 2 front sheet supports on linear guides CE-certified laser safety system (Lasersafe) mounted on the upper beam Machine fully complies with CE standards Chsdpfx Asv Rtg Toitja new pumpt installed The machine is being sold in its current condition. The machine was purchased from an insolvency sale and transported to our warehouse. The basic up and down functions have been tested and are working. Apart from that, we have no further information regarding the technical condition or overall functionality of the machine. An on-site inspection can be arranged upon request. The machine is sold as is, without any warranty or guarantee. One-time offer – available immediately!Only 1 unit in stock – ready for fast delivery – no lead time!Take advantage of this rare opportunity to own a high-performance CNC press brake at a fraction of the original price.

Condition: like new (used), Year of construction: 2026, operating hours: 72 h, functionality: fully functional, machine/vehicle number: MT100SP, turning length: 350 mm, turning diameter over cross slide: 380 mm, turning diameter: 350 mm, spindle motor power: 12,000 W, spindle speed (min.): 50 rpm, spindle speed (max.): 4,000 rpm, spindle bore: 50 mm, Super Precision Hard Turning Lathe Auto Matic loading and unloading and measurement options Codpfsvl S Dyex Aitsha High precision accuracy 0.0001mm Hydrostatic technology Spindle runout 0.15μm X/Z axis positioning accuracy 1μm X/Z axis repeated positioning accuracy 0.2μm System resolution 0.01μm Quality Guaranteed

Condition: used, Year of construction: 2019, Technical details: Chodpfx Aezp Itbeitoa x-travel: 16000 mm y-travel: 4000 mm z-travel: 1600 mm

Year of construction: 1998, condition: excellent (used), machine/vehicle number: WIT33, 1 Pfeiffer wall slewing crane 2000 KG payload / lifting load Outreach about 6m, 2000KG 2to payload with Demag DC chain hoist 2000KG (2 lifting speeds) from BJ 2015 Trolley travel + swiveling electrically Total weight around 1800 kg Year of construction 1998 Crane is still being cleaned from the foundry dust Complete with wall brackets, outriggers, chain hoist, drag cable, chassis and small items Pivoting range approx. 180° Item location is 75053 Gondelsheim Plant is completely dismantled and immediately available See pictures Cjdpfxok Iyqmo Aitsha Shipping by forwarding agent or pick-up Please inquire about shipping costs according to zip code

Condition: repair required (used), Somex Max 2 Drilling Unit Manufacturer: Somex Model: Max 2 Spindle mount: ER 20 collet chuck RPM: 2820 * Codpsd Huwgsfx Aitsha Hz: 50 * kW: 0.37 * V: 220 / 380 * A: 2.1 / 1.2 * *The motor data cannot be verified and is not legible! Presumably, the data is similar to that of identical units.