Tool Room Milling Machine - Universal

SINN MS II D

Condition: like new (used), Year of construction: 2013, functionality: fully functional, Universal milling machine Deckel FP2 repowered by FPS built in 2013 with 3-axis digital readout Heidenhain ND 780 As good as new !!! Technical data: >> Machine no. 2202-7020 FPS no. 3364 Year of construction 2013 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power .:2.2 KW >> Travel X/Y/Z: 400/200/400 mm >> Equipment: Vertical & horizontal spindle >> Vertical quill and horizontal quill extendable - SK- 40 >> Tightening system S20x2 Ihjdpfjvbifgex Ad Net >> Weight approx. 1100 kg Accessories and equipment: >> 3-axis digital readout Heidenhain ND 780 >> Brake motor with immediate spindle stop >> Central lubrication >> 2 x emergency stop >> Operating instructions >> Coolant device To the machine : We offer a universal milling machine Deckel FP2 repowered by FPS in mint condition. The Deckel is equipped with a brake motor for immediate spindle stop. The machine has an electric central lubrication system. With two emergency stop switches for safety. Mechanically and electrically tested as of 2013. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out the lids under power on site. The machine is available immediately.

Year of construction: 1985, condition: used, 1 branded engraving machine make KUHLMANN type GM I-I working area: 320 x 200 x 280 stencil table 500 x 400 mm, working table 500 x 200 mm 3D shape engraving device TGV - plate engraving device Div. stencils and type sets Ihedpfok Tt Axex Ad Net Div. engraving gravers Speed range 4.200 - 20.000 min-1 Space requirement approx. 1.2 x 1 x 1.5 m Weight approx. 250 kg

Condition: used, x-travel 500 mm y-travel 400 mm z-travel 450 mm turning speeds 31,5 - 1600 U/min Iodpfx Adevlakue Njht tool taper SK 40 quill stroke vertical 80 mm diameter of quill 80 mm table: 1000 x 850 mm total power requirement 4,0 kW weight of the machine ca. 2,6 t dimensions 2,1 x 1,7 x 1,7 m Universal tool milling machines - Digital display - Angle table - Coolant system - Machine feet

Condition: used, Year of construction: 1973, x-travel 290 mm y-travel 170 mm z-travel 310 mm table surface area 600 x 215 mm spindle taper SK 40 spindle turning speed range 50 - 2500 U/min feeds 9 - 450 mm/min quill stroke 70 mm total power requirement 1,8 kW Isdpfx Aotqqn Rsd Neht weight of the machine ca. 860 kg dimensions of machine L x W x H 1,06 x 1,05 x 1,33 m Accessories: vertical head with quill retraction, solid table, counter bearing, coolant

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, turning diameter over cross slide: 240 mm, spindle bore: 86 mm, turning length: 1,120 mm, turning diameter over bed slide: 500 mm, quill stroke: 180 mm, quill diameter: 80 mm, center height: 250 mm, rapid traverse X-axis: 8 m/min, rapid traverse Z-axis: 10 m/min, spindle speed (min.): 20 rpm, spindle speed (max.): 3,000 rpm, bed width: 350 mm, total length: 3,300 mm, total width: 2,020 mm, total height: 1,900 mm, overall weight: 2,500 kg, travel distance X-axis: 165 mm, travel distance Z-axis: 1,200 mm, controller manufacturer: Siemens, controller model: 828D + Shopturn, Equipment: rotational speed infinitely variable, Circumferential diameter over bed: 500 mm Center distance: 1200 mm Max. speed range: 3000 rpm Spindle power (40/100% ED): 13/9 kW (AC drive) Spindle holder: Camlock D8 Ihsdeu T Iqyopfx Ad Nst Spindle bore: 86 mm Including equipment a.o: - 8-station turret (Pragati BTP-80) with VDI-30 - Sliding control panel over the entire length - Pull-out chip tray - Siemens AC servo motors - Siemens supply and amplifier modules - Machining area covered by 2 sliding doors - Manual tailstock - Automatic central lubrication - Coolant system

Condition: good (used), Year of construction: 1991, machine/vehicle number: 20645, Offer 24309 Technical data: - Table size 710 x 315 mm - Working range of the axes - X (longitudinal) mechanical / manual 400 / 420 mm - Z (vertical) 350 / 370 mm - Y 220 / 228 mm Iodet Tad Hspfx Ad Njht - Distance milling spindle - table surface 50 - 465 mm - Tool holder ISO 40 - Spindle speeds horizontal in 16 steps regul. 56 - 1800 rpm - Spindle speeds vertical in 16 steps regul. 56 - 1800 rpm - 16 feed speeds 11 - 355 mm/min - FAGOR digital display - Drive 400 V / 2.2 kW - Space requirement approx. W 1600 x H 1900 x D 1600 mm - Weight approx. 1300 kg

Condition: used, functionality: unexamined, For sale are 3 milling heads with integrated quill by Scheller. Isdsuabmbjpfx Ad Noht €350 per milling head The heads were previously installed on FE 1-10 Scheller milling machines. A reference photo is included in the images. (PLEASE NOTE: MACHINE IS NO LONGER AVAILABLE. THIS LISTING IS FOR THE HEADS ONLY) Delivery throughout Europe is possible on request and at additional cost. Prices are excluding VAT. Viewings available by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production facility? Or want to sell your own? For further information or contact options, please visit our website.

Condition: good (used), Year of construction: 1973, Deckel FP2 tool milling machine with 2-axis Heidenhain digital readout, rigid table, SK 40 spindle holder. Long sliding milling head, accessories: various collets and milling arbors, counter holder. Good working condition, can be demonstrated under power by arrangement. Iodpfeumclajx Ad Noht