Tool Room Milling Machine - Universal

MACMON M 100

Condition: used, Year of construction: 1992, Universal tool milling machine Manufacturer: MACMON Model: M 100 E Year of manufacture: 1992 - workshop tested Machine no.: 1714 Geometric inspection with test report Bwjdpfxszxz Nho Aa Tju Accessories: - 3-axis digital display K+C Arbah-M, new - Fixed table 600 x 210 mm (T-slot: 12 mm) - Vertical milling head SK 40 with draw-in thread S 20 x 2 - Coolant system - Operating manual Used, as is, no warranty The machine is technically in the condition corresponding to the year it was manufactured.

Condition: good (used), Year of construction: 1973, Deckel FP2 tool milling machine with 2-axis Heidenhain digital readout, rigid table, SK 40 spindle holder. Long sliding milling head, accessories: various collets and milling arbors, counter holder. Good working condition, can be demonstrated under power by arrangement. Bwodpfx Aasumclao Teu

Condition: used, Macmon M 100 E – Universal milling machine Bwodpjzzymqofx Aa Tou -Travel ranges X / Y / Z: 310x340x170 mm -Spindle speed range: 50 - 2500 rpm -Automatic feeds and rapid traverses in all 3 axes -Tool holder: ISO 40 -Swiveling vertical head -Tilting table: 600x220 mm -Total power consumption: 2.5 kW -Documentation Dimensions: L x W x H: 1.5 x 0.7 x 1.5 meters / Weight: 900 kg Errors and omissions excepted.

Condition: used, Year of construction: 1999, x-travel 290 mm y-travel 170 mm Bwodpfx Aaowngkrj Tju z-travel 310 mm table surface area 600 x 210 mm spindle taper SK 40 spindle turning speed range 50 - 2600 U/min feeds 9 - 450 mm/min quill stroke 70 mm dimensions of machine L x W x H 1,35 x 1,05 x 1,63 m total power requirement 5,5 kW weight of the machine ca. 720 kg - machine out of teaching shop - Accessories: solid table, vertical head with quill retraction, DRO on 3 axis HEIDENHAIN, various tool fixtures, coolant

Condition: ready for operation (used), Macmon M100 Universal Milling Machine - Milling spindle - Number of spindle speeds: 16 - Spindle speeds: 40, 63, 80, 100, 125, 160, 200, 250, 320, 400, 500, 630, 800, 1000, 1250, 2000 rpm - Spindle internal taper: ISO 40 - Collet bore up to: 25 mm Ø - Spindle block travel (manual): 170 mm - Angular milling table - Size of clamping surface: 640 × 195 mm - 2 T-slots, width/spacing: 12 / 90 mm - Longitudinal travel, automatic/manual: 290 / 310 mm - Vertical travel, automatic/manual: 310 / 340 mm Bwsdsztfmyspfx Aa Teu - Feed gear - Number of feeds: 16 - Feed rates (mm/min): 9, 14, 18, 22.4, 28, 35.5, 45, 56, 71, 90, 112, 140, 180, 224, 280, 450 - Motion lead screws - Longitudinal travel of the table (1 revolution): 5 mm - Vertical travel of the table (1 revolution): 2.5 mm - Drive motor - Power: 1.3 / 1.8 kW - Speed: 700 / 1400 rpm - Documentation Dimensions: L x W x H 1.0 x 1.0 x 1.3 meters / Weight 700 kg Errors and omissions excepted.

Condition: good (used), Year of construction: 1998, functionality: fully functional, Universal tool milling machine Bwjdpfx Aaorwml Aj Tsu Product: MACMON Type: M 100 ADR Technical Data: - Heidenhain TNC124 control - Machine number: 7989 - Year of manufacture: 1998 - Travel: X 310 mm Y 170 mm Z 330 mm - Speed range: 40-2500 rpm (infinitely variable in 2 ranges) - Feed rate: 10-800 mm/min (infinitely variable) - Rapid traverse: 800 mm/min - Equipment: Vertical & horizontal spindle (incl. lifting device for vertical spindle) - Table size: 600 x 215 mm - SK40 - Drive motor: 2.2 kW - Connected load: 5.5 kW - Weight: approx. 750 kg - Space requirement: 1000x1160x1400 Incl. complete documentation The machine can be tested / demonstrated under power on site. All information without guarantee. Subject to prior sale. The object of purchase is sold under exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations by the seller or for any injury to life, limb or health.

Condition: good (used), Year of construction: 1995, Macmon M 100 E tool milling machine with 3-axis Elesta-Heidenhain digital display from the training department, rigid table, SK 40 spindle mount. Good working condition, can be demonstrated under power by arrangement. Bedpfx Aov Azb Nea Tjwu

Condition: good (used), Year of construction: 2005, Internal article no.: 24012 Bjdpfx Asrywa Rsa Tewu Universal milling machine Macmon M100 NC YEAR OF MANUFACTURE: 2005 Control: Heidenhain TNC124 + coolant pump + machine vice Travel: X 310 / Y 170 / Z 330mm Speed: 40-2000 rpm Mounting: SK40 LxWxH: 1200 x 1600 x 1850mm Weight: approx. 1000Kg

Condition: good (used), Year of construction: 1990, Macmon M 100 E tool milling machine with 2-axis Elesta-Heidenhain digital readout from training department , rigid table , SK 40 spindle holder. Good working condition, can be demonstrated under power by arrangement. Bwodpfx Aasrazzro Tsu

Condition: good (used), 1 x Universal milling machine Bjdpfxot Sdaie Aa Tjwu Macmon M 100 in very nice condition from vocational school. Technical data and more photos will follow. The machine can be inspected under power.

Year of construction: 1978, condition: excellent (used), Macmon M 100 D tool milling machine with 3-axis Fagor digital display, from a training department. Features a fixed table and SK 40 spindle mount. Accessories include various collets and milling arbors. In very good, operational condition; can be demonstrated under power by arrangement. Bodpfx Aohtfubea Tewu