Frame press gluing press

Schafberger und Sproedhuber 3500/2400

Year of construction: 2023, Operating hours: 1 h, Condition: as good as new (ex-display), Functionality: fully functional, Machine/vehicle number: S23MythoSarya03, Mytho S with TP / Transparent, accessible at ground level with lift trucks and El. lifts. MAST VERSION Winding height 2450 mm 99 program TOUCH display 7" Bk8Maprqtx0 FILM SLIDE TYPE "PRS" (POWER ROLLER STRETCH) 200% pre-stretching Optionally, more or less pre-stretching possible TURNTABLE / TP Ø1650 mm / Opening 06.00 - Mast 12.00 (can be changed at any time) ARYA system for automatic foil blowing and cutting, incl. infrared remote control

Condition: used, Technical specifications: on demand Dpq0Dh Schafberger & Sprödhuber hydraulic frame press with electric adjustment. Special price from location until November 30, 2024

Condition: used, Year of construction: 1998, Used machine Year of construction 1998 this machine can be used to drill corner bearings, fanlights and olives on loose or pressed frame wood The scanning is carried out at the rebate, the 8 stops for the corner bearing and skylight, as well as for the set timber and transom are automatically used after the timber has been positioned. Dppfmv The machine has an automatic program sequence with electrical control for the drilling motors, triggered by a safety foot pedal Pneumatic connection R 1/4" 5-6 bar Suction speed 25 m/sec. Suction nozzle diameter 120 mm Electrical connection 0.75 kW Space requirement 2950 x 650 x 1100 mm Availability: short term Storage location: Flörsheim

Condition: good (used), Year of construction: 1994, Functionality: fully functional, Working height: 220,080 mm, Working width: 3,200 mm, Overall weight: 2,500 kg, Cylinder stroke: 80 mm, Height adjustment type: hydraulic, Hydraulic adjustment 3 vertical lifting cylinders, two horizontal lifting cylinders, really very good condition B3Eu78Unj0

Condition: excellent (used), Year of construction: 1998, Machine/vehicle number: 130598, Automatic frame press TYPE FS Press for gluing frames, windows, doors and similar parts. Bnocmgoy7A Year of manufacture 1996 Hydraulics 0-100 bar Pneumatics 0-10 bar Working voltage 380V/50Hz Power 7.5 kW

Condition: excellent (used), Year of construction: 1992, 4.5 kW motor D7U2Yjw Working height 245 cm Working width max. 365 cm

Condition: excellent (used), Year of construction: 2003, Perforated plate press Tjaqm8Cb Schafberger + Sprödhuber (S+S Maschinenbau) Type LPP - SPECIAL FORMAT Universal gluing stand / frame press Press area approx. L x W 3800 x 3000 mm Installation depth approx. 1300 mm 6 manual hydraulic cylinders with integrated pressure relief valve, 60 mm stroke, max. pressing force 2,000 kg, pressure force finely adjustable with hand lever, cylinder can be swiveled 360° as required incl. access ladder - on rollers, can be pushed over NEW MAGNETIC LOCKS Ideal press for joineries that produce frames, solid wood panels or windows in special shapes Equipped with various press elements, see photos. Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Year of construction: 1994, Condition: used, Frame press Schafberger & Sprödhuber Type Super 4 Kw Cfs80Ovgkl

Condition: ready for operation (used), Functionality: fully functional, Schafberger & Sprödhuber edge press with heating bar function-tested 380 Volt 0,75 kW 6 pressure cylinders Processing thickness max. 50 mm Rail length 2600 mm Dimensions 2700 x 500 x 1000 mm Weight 200 kg Ixxnpve9T

Condition: used, Year of construction: 2017, Working width: 310 mm Planing height: 160 mm Number of spindles: 7 Bottom spindles: 2 Right spindles: 2 Spindles left: 2 Spindles top: 1 Spindle configuration: b-r-l-t-b-2cle Spindle rotation speed max 1/min: 6.000 rpm Spindle diameter: 50 mm Feedrate max: 60 m/min Continuously variable feed: Yes Feed motor: 15 kW Dpouvv Main motor power: 37 kW Saw shaft: Yes Saw shaft: 50 kW Vertical cleaving spindle: Yes Jointing technology: straight jointer Spindle(s) with counterbearing: Yes Hydraulic clamping: Yes Seperate motor per spindle: Yes Motoric adjustment: Programmable controller Surface of the machine table: hard-coated Infeed table length: 1.100 mm Table rollers: driven Lubrication pump: automatic Pneumatic top pressure: Yes First infeed roller controlled: Yes Type of feed roller drive: Cardanic Quick tool change: WEINIG PowerLock Quick release systems for tool change: 2 Infeed automatically: Magazine CNC-axes: Yes WEINIG HIGH-MECH E1: Yes Oppositely positioned spindles: Yes Control: WEINIG POWERCOM PLUS

Condition: new, table length 2400 mm table width 1200 mm table height 200 mm weight of the machine ca. 1,0 t Crrchyr The table Professional 750 Article no. 2400x1200x200 mm has a diagonal hole arrangement on the table top and a parallel hole arrangement in 50 mm grid on the sides. The holes have a diameter of 28 mm. The table has a material thickness of about 24.5-27 mm and is made of high quality steel S355J2 + N. Grid lines at a distance of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Including 4x feet Basic equipment 650 Article no. 280858.X

Condition: new, table length 2400 mm table width 1200 mm table height 200 mm weight of the machine ca. 1,0 t The table Professional Extreme Article no. 4-280030.X7 2400x1200x200 mm has a hole arrangement in the 100 mm grid on the table top and a parallel hole arrangement in the 50 mm grid on the sides. The holes have a diameter of 28 mm and the table has a material thickness of about 24.5-27 mm. The table top is made of hardened tool steel. The low-loaded sidewalls are still made of steel S355J2 + N for cost reasons. Grid lines at a distance of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Hlhvgfauu Including 4x feet Basic equipment 650 Article no. 280858.X

Condition: new, table length 2400 mm table width 1200 mm table height 200 mm Bu0Nxqyg3O weight of the machine ca. 1,0 t The table Professional 750 Article no. 4-280030.P 2400x1200x200 mm has a hole arrangement in the 100 mm grid on the table top and a parallel hole arrangement in the 50 mm grid on the sides. The holes have a diameter of 28 mm. The table has a material thickness of about 24.5-27 mm and is made of high quality steel S355J2 + N. Grid lines at a distance of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. including 4x feet Basic equipment 650 Article no. 280858.X

Condition: new, table length 2400 mm table width 1200 mm table height 200 mm weight of the machine ca. 913 kg 7D - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 – 27 mm - Sidewall made of high quality steel S355J2+N + plasma nitriding - Bore Ø 28 mm - Holes surface in diagonal grid - Rounded corners, edges and holes - Side panel height 200 mm - Holes in the side wall in the diagonal grid Bu0N0Gszqx - Including scaling on the surface - Structure reinforced with ribs - Grid lines enable precise build-ups Including 4x feet basic equipment 650 item no. 280858.X

Condition: ready for operation (used), Heidenhain UV 140 . 335 009-04 Power supply SN: 12 787 668 - Bracket broken off, the item has been checked and tested! used, good condition, 100% functional, scope of delivery as per photos Huztai0

Condition: ready for operation (used), Bosch SE-B2.020.060-04.000 Brushless servo motor with brake and Heidenhain ERN 221.2123-500 encoder Id-Nr. 270 675 02 , serial no. according to photo , hole spacing of mounting holes: 81 x 81 mm, Ø drive shaft: 14 mm ,used, Cxp27Clc

Condition: ready for operation (used), Bosch SE-B2.020.060-04.000 Brushless servo motor with brake and Heidenhain ERN 221.2123-500 encoder Id-Nr. 270 675 02 , serial no. according to photo , hole spacing of mounting holes: 81 x 81 mm, Ø drive shaft: 14 mm ,used, Cj2Bzdsrhf

Condition: ready for operation (used), Bosch SE-B2.020.060-04.000 Brushless servo motor with brake and Heidenhain ERN 221.2123-500 encoder Id-Nr. 270 675 02 , serial no. according to photo , hole spacing of mounting holes: 81 x 81 mm, Ø drive shaft: 14 mm ,used, Cj2B0Agcdi

Condition: like new (used), Year of construction: 2019, WEINIG planing line Powermat 2400 with destacking, bundling and stacking Manufacture year 2016 / 2019 Weinig planing line 80 m/min with de-stacking and infeed system, outfeed with bundling and automatic stacking system Consisting of: - Weinig cross chain transport for wood packages Bjiv3Kll - Weinig tilt hoist - Transport belt for stacking sticks - Weinig cross chain transport - Weinig automatic infeed - Weinig moulder Powermat 2400 5 spindles: B-R-L-T-B, max. 80 m/min - Weinig outfeed system with cross transport - Weinig cross transport - Weinig single piece feeder - Weinig cross transport direct to stacker - Weinig automatic bundle stacking system - 3 pc. Mosca automatic strapping machine - Weinig cross transport for bundles - Weinig automatic stacking system with 4 pc. stacking sticks magazines - Weinig cross chain transport for wood packages

Condition: new, table length 2400 mm table width 1200 mm table height (lateral area) 100 mm weight 537 kg SIEGMUND authorized dealer - all items available! Product description - high quality steel S355J2 + N + plasma nitriding - Material thickness approx. 11.5 - 13 mm - Hole Ø 16 mm - Holes surface 50x50 mm grid - Rounded corners, edges and holes - Height of side wall 100 mm - Distance between holes in side wall 25 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Special set - including tool set of 16 3 Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion Bog22Y9Thi - more corrosion-resistant / higher load capacity Furnishing: - 16 hole pattern / dimensions 2400 x 1200 x 100 mm - Plasma nitrided version with scale - including 6x base equipment - incl. 16 tool set 3: + 8x 160610.N clamp + 4x 160630.N clamp + 4x 160645.1.N prism + 24x 160510 bolts + 4x 160410.N stop + 8x 160420.N stop + 8x 160108.N angle + 8x 160110.N angle + 2x 160162.N angle + 1x 160134 + 36.N bracket + 1x 163999 accessory set

Condition: new, table length 2400 mm table width 1200 mm table height (lateral area) 100 mm weight 466 kg SIEGMUND authorized dealer - all items available! Product description - high quality steel S355J2 + N + plasma nitriding Vprzvmsb - Material thickness approx. 11.5 - 13 mm - Hole Ø 16 mm - Holes surface 50x50 mm grid - Rounded corners, edges and holes - Height of side wall 100 mm - Distance between holes in side wall 25 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Equipment: - 16 hole pattern / dimensions 2400 x 1200 x 100 mm - Plasma nitrided 750 version with scale - incl. 6x base equipment

Condition: good (used), Functionality: fully functional, Workpiece weight (max.): 120 kg, Working height: 940 mm, Height adjustment type: mechanical, Table height adjustment: 940 mm, Fezer rotating and swiveling vacuum suction table, or assembly table extendable with 2 pcs. suction plates 300 x 100 mm for all dense workpieces, such as metal, wood, glass, stone etc.. rotatable 360 degrees and tiltable up to 90 degrees, working height adjustable 740 to 940 mm no pressure marks or scratches on the material due to the suction cups approx. 300 mm length x 100 mm 3T8Mhi7Vk - shortest clamping times due to release and clamping by foot valve actuation - no obstruction during processing, the sides of the workpiece are completely free - the suctioned parts can be rotated or swiveled. - the suction plates are adjustable in height - Possible applications include e.g. sawing, sanding, surface treatment, priming, assemblies - Suction holding force at 80% 100 mbar, operating vacuum horizontal approx. 120 kg, parallel 60 kg Manufacturer: Fezer Type : ATS /E Size of the suction plate 300 x 100 Number of suction plates 2 pcs. Height-adjustable column swivel suction and adjustment head Workpiece support 730 to 180 mm x 2 pcs. without vacuum generator ( stationary air connection ) Operating pressure 3 - 6 bar Delivery rate 4.2 m³/h

Condition: used, SKU : 418S1034 Location : Barneveld Make : MVG-Metallbau- und Vetriebs- GmbH Type : 8000304 Machine number : 22569/91116 Pressure Working pressure : 1 Bar Vacuum possible : check Working pressure jacket : 3.5 Bar Main Features Material : Stainless steel Volume : 427 Ltr. Surface : 2.84 m2 Specified Features - Tray dryer Cfk3G8Ligt Tray dryer : check Stainless steel trays : check Heating surface : 2,84 m² Drying chamber capacity : 427 Ltr. Drying chamber sizes : 670x950x670 mm Max. temperature : 95 °C Number of trays : 5 Tray sizes : 600x945x25 mm Distance between the trays : 95 mm With 1 door : check With vacuum pump : check Motor : 2,2 kW 220-380 Volt Material : Stainless steel Year of construction : 1991 With switchgear : check Floorspace : 1x1,5 M Total height : 1,9 M Weight : 1450 Kg What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect our machines in Barneveld, The Netherlands. Please visit our Foeth website for more information about this machine.

Condition: ready for operation (used), Year of construction: 2000, Clamping beams move pneumatically and fold back pneumatically behind the contact surface this ensures free passage of the material Clamping width 3750 mm Dpsv9F

Condition: ready for operation (used), Muhr and Bender 5-fold punching machine KBL 560 Optima F C0S0Fjvuf0 Manufacturer: Muhr and Bender Type: KBL 560 Optima F Condition: used Incl. accessories