Glazing Bead Saw

RYKO GmbH GLSP-200N-AV

Condition: as good as new (ex-display), Year of construction: 2024, Hydro Pneumatic Corner Crimper EVP-350HP Hydro-pneumatic press operation Lny2B9 Press Strength 2 x 3.500 KP at 8 Bar Press Depth 30 mm Back centring positioner with Pneumatic work piece clamping 3 sets standard crimping knives 3/5/7 mm Air service unit Profile support arms with Perdinax

Year of construction: 2021, Condition: new, Automatic Screw Unit SE1 SA With automatic screw feeding Head only bench mount,... P2Am0Euq

Year of construction: 2018, Condition: as good as new (ex-display), Glazing Bead Saw GLSM-200E Manual saw feeding Pneumatic work piece clamping (4) Adjustable table height Bpeft Adjustable table height 2 x 45° motors Accessories: HM Saw blade 200 x 2.2 x 30mm HM Saw blades 103 x 2.0 x 30mm Z=60/45° Left HM Saw blades 103 x 2.1 x 30mm Z=60/45° right Variable measuring stick 1.5m Variable measuring stick 3.0m Support for measuring stops 3.0m

Year of construction: 2021, Condition: as good as new (ex-display), Automatic Double Screw Unit SE5 S With automatic screw feeding Head only bench mount Ediqa3U Automatic working operations Depth stop control,...

Year of construction: 2020, Condition: as good as new (ex-display), Glazing & Control Press VK-3522 Adjustable height pneumatic 500 mm Clamping height: 2.200 mm, Clamping width: 3.000 mm P2Auojey Pneumatic clamping press beam Clamping pads: 120 mm width L= 3.900 x W= 1.050 x H= 2.500 mm

Condition: excellent (used), Year of construction: 2023, operating hours: 1,851 h, Functionality: fully functional, pressing force: 70 t, bale weight: 500 kg, filling opening width: 1,100 mm, filling opening length: 1,400 mm, bale height: 750 mm, bale width: 1,100 mm, overall weight: 17,000 kg, oil tank capacity: 70 l, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410 BS-22/50 Year of construction 2023 Pump operation hours 1,851 hours, as of July 24 Press power main press 70 t (a 70 tonne hydraulic cylinder is installed, special equipment) Specific press force 90,9 N/cm² (a 70 tonne hydraulic cylinder is installed, special equipment) Feed channel 1,400 x 1,000 mm Theoretic cycle time 13 sec Theoretic throughput capacity 266 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 22 kW Connected load 65 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 5,5 t/h bulk weight of 50 kg/cbm approx. 7,5 t/h bulk weight of 100 kg/cbm approx. 9,7 t/h Bale weight with a bale length of approx. 1.2 m up to 500 kg, depends on material SPS controller Siemens S7-1500 Operating panel Schneider Harmony Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 17 t Special equipment: Wear-resistant floor made of HARDOX steel Larger main hydraulic cylinder with 70 tonnes of pressing force Special press ram for pressing loose bulk materials with small grain sizes OptiCut XS system for lower cutting forces and higher throughput rates Special pressing piston for pressing "difficult" materials Technical data for the conveyor belt: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Deutschland Type KGF GB 1500 Year of construction 2023 Drive power 4.0 kW Belt speed approx. 0.3 m/second Length feeding conveyor 2,679 mm Length elevating conveyor 6,866 mm Length goose neck 1,272 mm Grade 35° Dqj8Jt Effecting width 1,400 mm Side wall height 800 mm Carrier height 50 mm Carrier distance 750 mm Belt quality EP 400/3, 3:1 (DIN quality N) Overall height 4,515 mm Overall transport dimensions11,148 x 2,502 mm (l x w) Technical data on the non-contact personal protection system: Manufacturer BOREMA Umwelttechnik AG, Switzerland Type APSS iBOR 22 Year of construction 2023 Condition of the press system: The entire system is in very good condition due to the short operating time of only 1,851 pump hours and the processing of only paper, cardboard and film. Scope of delivery: Avermann baler, type AVOS 1410 BS-22/50, incl. wire drawing stations and bale chute Avermann conveyor belt, type KGF GB 1500 BOREMA personal protection system, type APSS iBOR 22 Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Year of construction: 1988, Condition: ready for operation (used), Max. operating temperature: 200°C, usable space: 4.42m³, steam room volume: 5.6m³, volume flow: 9.87m³/min, heating output: 30kW, nominal output: 32.2kW. 3Q0Sjguro

Condition: repair required (used), Year of construction: 2011, operating hours: 104 h, Functionality: limited functionality, machine/vehicle number: KN 10 39 17, fuel type: diesel, tank capacity: 700 l, output current: 188 A, output voltage: 400 V, output frequency: 50 Hz, nominal power: 128 kW (174.03 HP), nominal power (apparent): 130 kVA, motor speed: 1,500 rpm, motor manufacturer: Deutz, type of cooling: water, For sale is an AVS Aggregatebau GmbH diesel generator with the following key data: Manufacturer AVS Aggregatebau GmbH Type DW 130 De 15 M 12 Generator no. KN 10 39 17 Year of manufacture 2011 Total technical data for generator: Power 130 kVA Voltage 400V 50 Hz Speed 1500 [1/min] TANK 700L Consumption depending on load up to 209g/kWh Operating hours 104.8 h Components in detail: Diesel engine Deutz BF6M 1013 E Engine no. 11021228 Power 128 kW Speed 1500 [1/min] Water cooling Dq2Ez2 Generator Mecc alte ECP 34-1L/4 Generator no. 0001444400 Power 130 kVa Cos-Phi 0.8 Voltage 400 V Current 188 A Frequency 50 Hz The unit has the following maintenance backlog: Replace V-belt Replace battery Change cooling water If the buyer dismantles and collects the unit themselves, the sales price is €25,000. If dismantling is carried out by Blue Energy Group AG, additional fees will apply. Components included in the purchase price can be seen in the pictures.

Condition: refurbished (used), Year of construction: 2024, Functionality: fully functional, machine/vehicle number: 6744, grinding length: 2,500 mm, grinding width: 300 mm, overall weight: 4,500 kg, grinding spindle motor power: 30,000 W, rapid traverse X-axis: 30 m/min, grinding spindle speed: 1,000 rpm, warranty duration: 12 months, input voltage: 400 V, Equipment: documentation/manual, The machine has been completely overhauled mechanically and electrically with new parts and the latest technology (retrofit) and is ready for immediate delivery. The machine looks like new and has not been in use since the retrofit. The year of manufacture refers to the retrofit. It comes with a 12-month warranty from the manufacturer. The machine has the following specifications: - Sanding length 2500 mm - Electromagnetic clamping table 300 mm wide, complete with electronic demagnetizing device, variable holding force control. - 30 kW sanding motor, N = 1000 rpm. - 1 segment head 450 mm Ø for 12 segments. - Automatic pulse feed with depth stop and rapid traverse. - DS servo drive via helical toothed rack, infinitely variable in the range of 0.02 - 30 m/min. - Cooling water system complete with pumps, water tank behind the machine. - Automatic central oil lubrication. - NC control panel control for Z and X axis. - Hardened raceways. - installed according to VDE regulations for 400 Volt/50 Hz - Paper belt filter - Color ACHATGRAU RAL 7038 / ANTHRAZITGRAU 7016 Structure The overhaul work on the machine at the manufacturer's premises for a general overhaul essentially comprised the following work and parts: A) - Grinding over the guideways of the machine bed - New pinion and new gear racks - Overhaul of the vertical support with new spindles, regrinding of the Z-axis guides & support plate, with new central lubrication & bellows - New rollers, new side rollers, new undergrip rollers, new scrapers, new spray flaps B) - Grinding motor overhauled and new bearings - New cables and new energy supply chain - New paint finish C) - New control cabinet with control panel control - New digital servo drives for X and Z axis E2Psosq D) - Completely new cooling water system incl. water tank and magnetic separator If you have any further questions, please contact us.

Condition: new, power: 7 kW (9.52 HP), Year of construction: 2023, Our smallest drum sieve the REMAV RS1500 is designed for space-saving sieving and, with a small space requirement, can separate larger quantities of screenings and lay them over conveyor belts and in heaps! Fzhhrd8 As a car trailer with street legal (80 km / h) with TüV it is easy to transport with 2.4 to total weight. Processing of all kinds of soils, broken rubble or compost - the RS 1500 is ideal for use in gardening and landscaping, civil engineering or pipeline construction.

Year of construction: 2024, Condition: new, Functionality: fully functional, Chamber volume: 400 liters Extraction: 60 liters/passage Surface area: Up to 7 m2 Loading: Optional from 1 to 12 Load material: Anodized aluminum or stainless steel Cooling capacity: 4 KW Heating capacity: Up to 600 Watt/load Uwkc9Zxl Power load: max. 9 kW Condensing temperature: -40 C Max. vacuum: 50 mTorr Time to max. vacuum: min. 15 minutes Pump: Overhauled Edwards V18 or similar Evacuation: Electromagnetic Door closing mechanism: Mechanical De-icing: Electric De-icing time: Approx. 120 minutes Monitor: 10" HD color touchscreen Connectivity: Ethernet via CAT6 Control: SIEMENS simatic Door: 40 mm acrylic Vacuum chamber material: Extruded aluminum 7mm Vacuum chamber surface: Hard anodized 25um Front panel: Powder coated Total weight: 310 Kg Dimensions: 115 x 107 x 90 cm Electrical connection: 3x 16A 230V Electrical connection US: 3x 20A 110V

Condition: excellent (used), Year of construction: 2009, operating hours: 20,536 h, Functionality: fully functional, pressing force: 80 t, bale weight: 600 kg, filling opening width: 1,100 mm, filling opening length: 1,400 mm, bale height: 750 mm, bale width: 1,100 mm, net weight: 16,000 kg, nominal current: 75 A, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 20,536 hours, as of September 2024 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: Due to a reorganisation of the manufacturing processes within the company, a new baling line is being built in a new hall. The old baling press with conveyor technology is therefore no longer required and is expected to be available for sale at the beginning of 2025. Technical data for the chain belt conveyor: Manufacturer not known Type not known E2Qbtum Length of feed belt 5,300 mm Length of ascending belt 12,700 mm Overall height 7,300 mm Useful width 1,200 mm Unfortunately, no further technical data, documentation or drawings are available. Condition of the press system: The entire system is in very good condition and is regularly cleaned and maintained by the operator. The quality of the bales is exceptionally good, as you can see from the photos of the pressed bale goods. Even hard plastics such as plastic crates, PP bucket chains and PE plastic drums were pressed into dimensionally stable bales with the fourfold vertical binding. Tidiness, cleanliness and maintenance of the systems are practised in this company and not just written on the website. Scope of delivery: Avermann baler, type AVOS 1410-45/80, incl. wire drawing stations and bale chute Avermann conveyor belt, type KGF GB 1500 Comments: The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) for the press is available in full. Unfortunately, there is no more documentation for the conveyor belt. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Year of construction: 2002, Condition: excellent (used), machine/vehicle number: Reg Nr. 976, Machine Name: Paddle dryer Used Manufacturer: AVA / Holland Merten GmbH Type: HTK 200 Construction year: 2002 Speed: 107 U/min Material: Stainless steel Driving force: 5,5 KW Model: EExdellCT4 Total content: 235 Liter Chibj2Jqrq Parts in contact with product: Stainless steel 1.4571 Gear box: Stirnradgetriebemotor Equipment: Double jacket, mechanical seal, shaft heater Dimensions: L 3400 x W 1100 x H 1500 mm Empty weight: approx. 1600 kg Message: Operating temperature 130°C Design temperature 200°C Internal pressure mixer -1/+3 bar Pressure double jacket +6 bar Accessories: Base frame, Maier head HWR 225 Condition: Used very good Price: on request

Year of construction: 2022, Condition: new, With the patented REMAV light-weight separator LA1200, they turn highly polluted building rubble or ballast into recyclable material in the blink of an eye! It separates the lightweight materials such as plastic, polystyrene, lightweight concrete or wood from the building rubble stone or concrete. The light weight separator can be integrated easily into any existing recycling plant. Bc8Mp00Nwi Due to the compact dimensions of the system, the screen trestle is easy to transport and can be loaded by wheel loaders with a bucket width of up to 2.70m.Integrated forklift shoes and lifting eyes ensure easy loading of the sieve box. The low task height of only 2.10m also makes it possible to load smaller wheel loaders. The basic machine is designed as single decker, but can be extended for fine screening up to 6mm at any time by means of retractable Unterdeckelemeten. This gives the option to separate the feed into 3 fractions. The sieve system is electrically powered and only needs 2KW/h.

Year of construction: 2002, Condition: excellent (used), Parts in contact with the product are made of stainless steel 1.4571, the rest of the dryer is made of 1.4301. Machine Name: Continuous Horizontal Vacuum Paddler Dryer used Manufacturer: AVA / Holland Merten GmbH Type: HTK 200 Construction year: 2002 Speed: 107 rpm Material: 1.4301 Driving force: 5,5 kW Model: EExdellCT4 Total content: 235 Liter Parts in contact with product: 1.4571 Equipment: Double jacket, mechanical seal Dimensions: L 3400 x W 1100 x H 1500 mm Empty weight: approx. 1600 kg Hsyqeirqy Technical documentation: Yes Message: Operating temperature 130°C Design temperature 200°C Internal pressure mixer -1/+3 bar Pressure double jacket +6 bar Accessories: Base frame Condition: Used

Year of construction: 2022, Condition: new, With the patented REMAV light-weight separator LA1200, they turn highly polluted building rubble or ballast into recyclable material in the blink of an eye. It separates the lightweight materials such as plastic, polystyrene, lightweight concrete or wood from the building rubble stone or concrete. The light weight separator can be integrated easily into any existing recycling plant. Hviy9F9Ge Due to the compact dimensions of the system, the screen trestle is easy to transport and can be loaded by wheel loaders with a bucket width of up to 2.70m.Integrated forklift shoes and lifting eyes ensure easy loading of the sieve box. The low task height of only 2.10m also makes it possible to load smaller wheel loaders. The basic machine is designed as single decker, but can be extended for fine screening up to 6mm at any time by means of retractable Unterdeckelemeten. This gives the option to separate the feed into 3 fractions. The sieve system is electrically powered and only needs 2KW/h.

Year of construction: 2023, Condition: new, With the patented REMAV light-weight separator LA1200, they turn highly polluted building rubble or ballast into recyclable material in the blink of an eye! Cso0Lnpw It separates the lightweight materials such as plastic, polystyrene, lightweight concrete or wood from the building rubble stone or concrete. The light weight separator can be integrated easily into any existing recycling plant. Due to the compact dimensions of the system, the screen trestle is easy to transport and can be loaded by wheel loaders with a bucket width of up to 2.70m.Integrated forklift shoes and lifting eyes ensure easy loading of the sieve box. The low task height of only 2.10m also makes it possible to load smaller wheel loaders. The basic machine is designed as single decker, but can be extended for fine screening up to 6mm at any time by means of retractable Unterdeckelemeten. This gives the option to separate the feed into 3 fractions. The sieve system is electrically powered and only needs 2KW/h.

Condition: new, Functionality: fully functional, power: 7 kW (9.52 HP), fuel type: diesel, overall weight: 2,400 kg, Year of construction: 2024, Used drum screen. The drum sieve REMAV RS1500 is designed for space-saving sieving and, with a small space requirement, can separate larger quantities of screenings and lay them over conveyor belts and in heaps! Dpn03V As a car trailer with street legal (80 km / h) with TüV it is easy to transport with 2.4 to total weight. Processing of all kinds of soils, broken rubble or compost - the RS 1500 is ideal for use in gardening and landscaping, civil engineering or pipeline construction!

Year of construction: 2023, Condition: new, The drum sieve REMAV RS1500 is designed for space-saving sieving and, with a small space requirement, can separate larger quantities of screenings and lay them over conveyor belts and in heaps! Oitffkxew As a car trailer with street legal (80 km / h) with TüV it is easy to transport with 2.4 to total weight. Processing of all kinds of soils, broken rubble or compost - the RS 1500 is ideal for use in gardening and landscaping, civil engineering or pipeline construction!

Condition: new, power: 7 kW (9.52 HP), Year of construction: 2023, Our smallest drum sieve the REMAV RS1500 is designed for space-saving sieving and, with a small space requirement, can separate larger quantities of screenings and lay them over conveyor belts and in heaps! Blcqko2Xvuq As a car trailer with street legal (80 km / h) with TüV it is easy to transport with 2.4 to total weight. Processing of all kinds of soils, broken rubble or compost - the RS 1500 is ideal for use in gardening and landscaping, civil engineering or pipeline construction.

Year of construction: 2022, Condition: new, Our smallest drum sieve the REMAV RS1500 is designed for space-saving sieving and, with a small space requirement, can separate larger quantities of screenings and lay them over conveyor belts and in heaps! Elyxujyma As a car trailer with street legal (80 km / h) with TüV it is easy to transport with 2.4 to total weight. Processing of all kinds of soils, broken rubble or compost - the RS 1500 is ideal for use in gardening and landscaping, civil engineering or pipeline construction.

Year of construction: 2019, Condition: excellent (used), Plate magnet, lifting magnet, overbelt magnet, police magnet, magnetic filter, magnetic separator B8Di7Wss8O Overband plate magnet Execution in VA 1.4301 tightly welded NEODYMIUM MAGNETIC CORE, very adhesive! Dimensions: 620x520x200mm 4 - piece M16 eyebolts on the back This lifting magnet was used by one of our customers as a "police magnet" in the meat processing industry. The price mentioned refers to 1 piece. Currently only 1 piece available from stock! All information without guarantee, only while stocks last! Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator Our core competence lies in supplying the customer with exactly what he really needs. Together with our customers, we work out customer-specific, individual solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Overband plate magnet Execution in VA 1.4301 tightly welded 420x420x200mm 420x420x250mm 620x420x200mm 620x520x200mm 820x520x200mm 820x520x250mm Completely welded stainless steel housing to protect the magnetic core Ring eyelets for hanging Cleaning drawer for easy removal of accumulated impurities. Installation above all conveyor systems possible...

Condition: excellent (used), Year of construction: 2018, operating hours: 100 h, Functionality: fully functional, 5 pcs: - Screw feeder gravimetr. Calvk70Ydq - Feed hopper with pneumat. Rotary flap each with cover - Screw conveyor from big bag feed with height-adjustable individual frame 1 piece: - Trough screw conveyor for merging and conveying the dosing goods into a transfer container. 5 pieces: - Big bag feeding station, with suspension crossbar to prevent the big bag from folding up when emptying. - Big bag plate bottom with discharge aid (vibration drive) 1 piece: - Switch cabinet incl. control unit Delivery EXW

Year of construction: 2023, Condition: as good as new (ex-display), Screening plant for wood chips Demonstration machine | New machine Screening capacity: approx. 35 - 40 m³/h for wood chips Design: stationary Fdwlrtv9Cp consisting of: Oscillating screen type ASM-300 - Design: TOP LINE - Screening area: 3.0 m² - Fractions: 3 pieces - Drive power: 2,2 kW - Machine weight: approx. 1,900 kg - Machine colour: RAL 5002 ultramarine blue - Screens freely selectable Vibrating hopper type AVB-600 - Bunker volume: 6.0 m³ - Drive power: 2 x 2.2 kW - Machine weight: approx. 3,000 kg - Machine colour: RAL 5002 ultramarine blue Optional accessories: - Troughed belt conveyors for material discharge - Switch cabinet // Electrical installation Functional description and mode of operation: The wood chips are fed into the vibrating hopper type AVB-600 by means of a wheel loader. The wood chips are then fed onto the vibrating screen type ASM-300, which separates the wood chips into three size classes (overlengths, chips, dust). The fractions are discharged by means of conveyor belts. The capacity of the screening plant is approx. 35 - 40 m³/h for wood chips. Advantages: - High screening capacity - High separation efficiency - Low noise and low maintenance - Flexible use - Individual production Screening plant for wood chips | Wood chip screen | Oscillating screen | Flat screen | Vibrating screen

Condition: new, Year of construction: 2024, Functionality: fully functional, Our Sapi blasting halls A crucial component for excellent surface treatment SAPI sandblasting halls and systems with 50 years of tradition and proven quality Sandblasting halls are designed for industrial and commercial use and provide a safe environment for all types of blasting work. These halls typically consist of a blasting room, an abrasive recovery system with filter and dust extraction system, lighting and various safety devices. In the blast room itself, the user is guaranteed a safe environment. The recovery system is used to collect, separate and reuse the blast media used, which reduces costs and environmental impact. Ventilation and filtration systems ensure that the air in the hall is clean and safe. Lighting and safety equipment are also important components of a sandblasting hall and ensure that the operator can see well and is protected from potential hazards. Cccoslw