Used Double miter saws for sale (14)

Condition: ready for operation (used), Year of construction: 2017, Functionality: fully functional, machine/vehicle number: 007707133, saw blade diameter: 550 mm, rotational speed (max.): 2,800 rpm, Machine recovered from the insolvency of an automotive supplier - machines are currently still in operation! TECHNICAL DETAILS Tool diameter: 550 mm Saw blade speed: 2,800 rpm MACHINE DETAILS Total weight: 1,400 kg Bob Eswhdnzo Ar Rzjwl Air requirement: 200 Nl/min Operating pressure: 6 bar Further information according to the manufacturer - without guarantee Control: R 700 Angle adjustment: 45°-90° Cutting length: min. 3,700 mm Dimensions: 5.4 x 1.4 x 1.9 m at a cutting length of 3,700 mm Weight: 1.4 t

Condition: used, Year of construction: 1989, saw blade diameter 420 mm cutting length 6000 mm 150 mm turning speeds 2800 U/min Bjbowfyqts E Ar Rzowl engine output je 4,0 kW connected load 8,0 kW weight of the machine ca. 1,8 t Dimensions (LxWxH) 7,0 x 1,5 x 1,5 m Double miter saw Minimum cutting length at 90° or 45°: 350mm Inward tilt range: 90° - 45° (up to 22.5° manually with digital display) Inward tilt range: 90° - 45° pneumatically Compressed air connection: 7 bar Including 3 spare saw blades

Condition: ready for operation (used), Year of construction: 1994, Functionality: fully functional, WEGOMA SD25 with 500-grit saw blade BECKHOFF C2001 controller with pneumatic tilting. Fully functional Bwsb E Arswf I Igo Rzel

Condition: used, saw blade diameter 400 mm cutting diameter 130 mm stroke 135 mm mitter cutting - all-position 0-45 ° turning speed range 1420 / 2840 U/min capacity 45 degrees: square 110 mm capacity 45 degrees: flat 50 x 240 mm capacity 90 degrees: flat 95 x 240 mm capacity 90 degrees: round 130 mm capacity 90 degrees: square 120 mm voltage 400 V total power requirement 3,7 / 4,5 kW weight of the machine ca. 600 kg dimensions of the machine ca. 1,15 x 1,20 x 1,60 m - Serial-No.: 102752 - cutting range round 130 mm Bwjb E Ar Red Scrrozjl - cutting range square 120 mm - cutting range flat 95 x 240 mm - vertical pneumatic clamping

Condition: used, Year of construction: 1990, cutting diameter 500 mm cutting length 5000 mm saw blade diameter 420 - 500 mm dimensions ca.6400 x 1500 x 1600 mm weight ca. 1600 kg feed stufenlos Beb E Ar Rsv U Dluozewl Motorized length adjustment with digital display manual and spare part list included

Condition: good (used), Year of construction: 1984, Functionality: fully functional, Double miter saw DGL 400 Manufacturer: Rapid Type: DGL 400 Year: 1984 Beb E Ajv T R E Ser Rzewl with Ferrocontrol control Saw blade: 500 mm Pivotable up to 45°

Condition: excellent (used), Year of construction: 2017, Functionality: fully functional, KABAN 2-head cutting machine for PVC cutting Beb Ejv Tmnvj Ar Rzowl

Condition: new, Year of construction: 2025, TWO HEADS CUTTING MACHINE Double-head oleopneumatic mitre saw with ascending retractable blades, with fixed left and movable right Cutting unit tilting up to 45° according to vertical axis (left towards right and right towards left) Possibility of reaching intermediate angles by means of mechanical stop No. 2 carbide blade Ø 500 mm with hardmetal inserts for aluminium and PVC Bwob E Ar Rsklzz Tszjl No. 2 cutting unit guard pneumatically controlled Triple pneumatic horizontal/vertical clamps Venturi effect blades cooling system Fumes and shavings extraction outlets outside Ø 100 mm Sliding control panel board Middling profile support Air-gun with hose

Condition: ready for operation (used), Year of construction: 1994, Functionality: fully functional, machine/vehicle number: 4558, cutting length (max.): 4,000 mm, saw blade diameter: 520 mm, total length: 6,800 mm, total width: 1,500 mm, total height: 1,700 mm, cutting capacity: 165 mm, type of input current: three-phase, saw blade speed: 2,710 rpm, pivoting range: 45 °, input voltage: 400 V, overall weight: 1,500 kg, saw blade bore: 30 mm, cutting range round at 45°: 200 mm, cutting range round at 90°: 280 mm, Rapid double mitre saw DGL Year of manufacture 1994 currently still in operation, available from approx. mid-March 2025. Machine can be inspected and tested. - Clamping from front and top, separately controllable - Profile height measuring device with correction device -Stop for short parts can be folded down manually Bwsb E Ajvgw Eljr Rzol -Pneumatically controlled cutting angles 90°-90°, 45°-45°, 45°-90° and 90°-45°. Intermediate angle manually adjustable -E-190 positioning control, operating instructions available - Operating instructions for the machine available

Condition: used, saw blade diameter 370 mm cutting range round 115 mm cutting range square 105 mm cutting range flat 70 x 240 mm cutting length min. 730 mm Bwob E Ar Rsd Il A Iozel cutting lenght max. 4000 mm saw blade turning speeds 1250 / 2500 U/min table rotating 180 ° stroke 120 mm feed stepless 0 - 500 mm/min coolant capacity 45 degrees: square 95 mm capacity 45 degrees: flat 50 x 200 mm cutting speed 1250 / 2500 m/min weight of the machine ca. 1,1 t dimensions of the machine ca. 5,00 x 1,30 x 2,00 m Double Mitre Saw for aluminium consits of two SKL 370 Circular Saws on common rails, one saw fixed one saw movable. - Serial No.: 28232 / 28233 - pneunatic clamping of workpiece - coolant equipment

Condition: new, Year of construction: 2025, machine/vehicle number: SÇ 4550 PROFILE PROCESSING AND CUTTING CENTER ( 9 AXIS & 10 STATION ), - In aluminum and PVC profiles; Grooving, hole drilling, marking, cutting at different angles, etc. Ability to perform operations - 10 special air-cooled spindle motors for high-speed aluminum - Axis speeds averaging 120 m/d - Precise 3-axis profile holding station - Profile feeding capacity 7 pieces - Profile machining length maximum 6500 millimeters / minimum 600 millimeters - Automatic profile length detection - Windows-based, easily adjustable user-friendly interface - Data transfer via USB, Online remote monitoring system - Remote connection support - 23.8" Touch high-performance touchscreen - 30 - 150 degrees between, +- 0.1 degrees servo-controlled cutting unit that allows precise cutting - Transporting the cut waste profiles to the collection cart with automatic conveyor system STANDARD EQUIPMENT - Ø550 Millimeter saw - Automatic waste chip conveyor discharge unit - Barcode printer OPTIONAL EQUIPMENT - Compatibility with CAM programs Bweb E Arsrcm Rus Rzsl - Optional length - Output conveyor with belt system - Safety barrier (Sensor)

Condition: new, Year of construction: 2025, machine/vehicle number: SÇ 301 S PVC KALIPSIZ ( MOLDLESS) ÇITA KESME MAKİNASI, - Complies with CE standards. Bwobeq U Tbrj E Ar Rzjl - PVC lath profiles are cut at 45 degrees with 4 saws - Adjustment for 12 different slat cuts - Ability to cut 2 slats at the same time - Right / left 2.5 meter conveyor system for long slats - Spacer nail adjustment mechanism - Pneumatic clamping system - Ability to cut aluminum slats by attaching a diamond-tipped saw (with cooling system) - Air gun - Adjustable cutting speed

Condition: new, Year of construction: 2025, machine/vehicle number: SÇ 402 Alttan Çıkma Kesim Makinası, - Complies with CE standards. - Used for cutting aluminum PVC profiles - Hydro-Pneumatic cutting process Beb E Arsrahzgj Rzewl - Adjust cutting speed according to profile - Right and Left -60, -45, -30, -22,5, -15, 0, +15, +22,5, +30, +45, +60 can cut at fixed angles. - Pneumatic vertical and horizontal press - Ø550 millimeter Aluminum saw with diamond tip - Roller conveyor is available (3 meters right and left) - Oil spray system - 3 Kw Motor and Hydro - check for precise cutting

Condition: new, Year of construction: 2025, machine/vehicle number: SÇ 400 Aluminyum Pvc Çift Kafa Kesim Makinası, - Conforms to CE standards. - Cutting Accuracy +/- 0.1 millimeter - Automatically adjusts to two angles, 90 and 45 degrees inward. - Automatic slicing at 90 and 45 degrees at two angles - Touch Color Panel Display - Connecting Remotely and Providing Technical Support - 2 X 500 millimeter Saw - Ø450 mm saw has a saw exit distance of 14 cm and 70 mm x 2 profile cuts - Ø500 mm saw has a saw exit distance of 16.5 cm and 80 mm x 2 profile cuts - Saw speed adjustment - 6 meter cutting feature - Wedge slicing - Multi-language support - Unlimited Measure Memory Capacity - Conveyor Right / Left profile support unit - Profile support unit between cutting heads - Spray saw cooling system - 2 vertical clamps - 4 horizontal clamps - Air gun Bwebsramvao E Ar Rzsl OPTION - Barcode printer - Cutting list transfer via USB stick - Hydro - pneumatic hydro-check controlled saw movement