Double miter saw

ELUMATEC DG104

Condition: used, Year of construction: 1994, Cutting length scale up to 5000 mm, saw blade 420 mm, roller conveyor 1500 mm, electro-motorized movement of the right unit, digital measurement display, saw units swiveling and tiltable. Storage location: customer Lhedpfx Aow Sadrof Ssr

Condition: good (used), Year of construction: 2003, functionality: fully functional, Length of sliding table: 3,000 mm Cutting width at rip fence: 1,000 mm Cutting height with blade diameter 450 mm: 75 - 150 mm Cutting height with blade diameter 350 mm: max. 100 mm (each at 90-degree blade position) Double carriage on steel round guides, no Pertinax Reinforced main saw motor: 7.5 kW Maximum saw blade diameter: 450 mm Height adjustment of the saw unit via dimension input on the control panel Motorized tilt adjustment of the saw unit via dimension input on the control panel Supplied with newly installed 350 mm saw blade 2-axis scoring saw unit, can be set in the control system to desired height and alignment relative to the main saw blade Scoring unit automatically lowers below table level when not in use Adjustment of the scorer can be done while the machine is running RAPIDO scoring saw blade – simplifies scoring width adjustment, set up in max. 3 minutes Adjustment range: 2.8 – 3.8 mm Additional accessories: Lhodpfx Aex Dax Esf Ssr - Mitre fence extendable to 3,200 mm, with 2 foldable stops - LASER cutting line indicator, e.g. for trimming cuts on solid wood planks

Condition: excellent (used), Year of construction: 2022, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 104000031, The machine is in very good condition. Lhsdpfjx I Rtqjx Af Ssr

Year of construction: 2006, condition: ready for operation (used), Additional Equipment Additional functionalities with extraction unit and roller conveyor for improved operation Lhjdpfxsx D Ix He Af Ser Extraction unit DG 104 cpl Roller conveyor 3m Profile lifting bars This Elumatec DG104 sawing machine was manufactured in 2006. It features a double mitre saw with a 420mm diameter and an E 555/3 for 22.5º inside cuts. Additionally, it includes an extraction unit DG 104 cpl, a 3m roller conveyor, and profile lifting bars. A great opportunity to buy this Elumatec DG104 sawing machine. Contact us for more information. Application Types Sawing

Condition: new, Automatic mitre saw UK-450 - Saw blade diameter 450mm - Processing length according to customer requirements Lhedpfx Afjd A Ttxs Sor - autom. positioning - automatic mitre adjustment (up to +/- 60°) - Range of application: Wood, plastic and aluminium processing - Feed conveyor as smooth conveyor (optionally as roller conveyor) Further technical details and details on request.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Year: 2011 - technically efficient, ready to work – after full service - Cutting length: 6000 mm - Discs: 420 mm (bottom cutting) Lodpfx Aswy Emcsf Sshr - E355 control - Digital angle indicator - Pneumatic angle adjustment 45-90 degrees - Cutting to outside dimensions, without correction - Cooling and lubrication system - Roller feeder - Vertical and horizontal pneumatic clamps - Automatically lowered and raised disc guards

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 1049333220, cutting length (max.): 4,500 mm, saw blade diameter: 420 mm, double mitre saw 4,5 m D=420mm; E 355; 22,5° inside second-hand, year of manufacture: 2008 M-No.: 1049333220 - cutting length 4.500 mm - saw blade diameter 420 mm - Swivel range inwards, pneumatic 90° - 45° (up to 22.5° manual with digital display) - External dimension cutting for all cutting variants. This eliminates the need for length calculations necessary. Great advantage for special angles. Positioning control E355 - Drive-independent measuring system - Positioning accuracy +/- 0.1 mm per meter - Pneumatic locking in position - 5" matrix display with membrane keypad and handwheel for navigation in the operating menus - Memory for 999 data records Correction values for profiles Lhodpfx Afsuw T Sto Ser - The record memory can store the record number, length dimension, profile number, angle position and number of pieces can be saved - Switch to 2nd language - Switchover mm/inch - RS 232 interface Technical data: Smallest cutting length at 90°: 335 mm Smallest cutting length at 45° inclination: 335 mm Voltage: 400V, 3 PH, 50 Hz Power output per motor: 4 kW Compressed air connection: 7 bar Air consumption per work cycle without spraying: 40 l with spraying: 64 l Accessories supplied: 2 carbide saw blades for aluminum and PVC (used): 420 mm diameter, 96 teeth Dosing spray device The following accessories are also included: 1x mobile workpiece support

Condition: used, Year of construction: 1992, Technical details: tube diameter: 6 mm tube diameter max.: 16 mm bending angle max.: 90 ° electrics - voltage/frequency: 220 / 50 V/Hz Total power requirement: 0,75 kW Ljdewivn Nepfx Af Sjhr Weight approx.: 0,145 t machine dimensions LxWxH: ca. 1,0 x 0,8 x 1,2 m Application: Mini tube bending machine with free bending head. Processing of precision steel tubes according to DIN 2391/C, material 35.4 NBK Ø 6 - 16mm. -With hydraulic drive -8-fold bending preselection angle up to 180 -Pipe stop length 1m -Emergency stop button -mobile with parking brake -pivoting pipe head (vertical in horizontal position) -required hydraulic oil = approx. 20 liters (e.g. Esso Nuto 32) Accessories: various bending tools *

Year of construction: 1985, condition: good (used), Offer 22556 Technical data: - Saw blade diameter 420 mm - saw blade bore 30 mm - max. cutting length 3000 mm - smallest cutting length at 90° + 45° 335 mm - cutting range see diagram enclosed - tilting range inwards manual 90 - 22,5 ° - inclination range inward manual 90 - 45 ° Lsdpfsimdlrjx Af Sohr - Saw blade speed 2800 rpm - drive 380 V / 2 x 4000 Watt - Compressed air supply 7 bar - Air consumption per working cycle approx. 64 l - space requirement approx. W 4500 x H 1950 x D 1600 mm - weight approx. 1400 kg - with: - cutting length adjustment with positioning control - positioning control renewed approx. 2002 by WOLFF - saw unit swiveling and tilting for high and wide profiles, - as well as shift cuts

Year of construction: 2008, condition: used, Saw blade diameter: 420 mm Max. cutting length: 6,000 mm Min. cutting length: 335 mm Automatic length positioning and angle adjustment via E 555 control with Windows and USB connection Motorized angle adjustment for swiveling both saw heads Moving roller conveyor Minimum quantity spray device Lsdpfx Afjw Axmbs Sshr Weight: approx. 1800 kg

Condition: new, Automatic mitre saw UK-450 - Saw blade diameter 450mm - Machining length according to customer requirements - autom. positioning Lsdpfxed Rhzxo Af Sjhr - automatic mitre adjustment (up to +/- 60°) - Range of application: Wood, plastic and aluminium processing - Feed conveyor as smooth conveyor (optionally as roller conveyor) Further technical details and details on request.

Condition: excellent (used), Year of construction: 2024, operating hours: 193 h, functionality: fully functional, travel distance X-axis: 7,200 mm, travel distance Y-axis: 480 mm, travel distance Z-axis: 340 mm, cutting width (max.): 335 mm, workpiece length (max.): 6,000 mm, milling spindle speed (max.): 6,000 rpm, section length (max.): 6,000 mm, TECHNICAL DETAILS - Profile Milling Machine Processing length: 7,200 mm Number of axes: 4 Control: eluCAM graphical, Windows XP user interface Workstations: 2 independently operating stations Turret tool changer: 8 tools, servo motor driven Tool holder: BT 30 Disc mill diameter: 180 mm Tool length: 150 mm (from point of attachment) Lhedpfx Afowprmze Sjr Travel distances Travel X-axis: 7,200 mm (without end-face processing), 7,080 mm (with end-face processing) Travel Y-axis: 480 mm Travel Z-axis: 340 mm Rapid traverse X-axis: 60 m/min Rapid traverse Y-/Z-axis: 30 m/min Positioning accuracy: ±0.1 mm/m Spindle Milling spindle speed: 1 to 6,000 rpm Milling spindle power: 6.0 kW Supply Air connection: min. 7 bar Air consumption: 100 l/min Electric connection: 400 V, 3~, 50 Hz, 35 A EQUIPMENT two independent workstations with light barrier and camera system Non-swiveling inclined milling head for 2 tools, Er20A, up to 18,000 rpm Inclined milling head swiveling 4 × 90°, Er20, up to 22,000 rpm Inclined milling head non-swiveling for steel, Er20A, 1,554 rpm Fixed saw head i=1:1, for D=300 mm saw blade, suitable for 90° cross cuts Carbide saw blade Z=100, D=300 mm, cutting width 3.2 mm Tool holder i=1:3.86 for 18,000 min⁻¹, ER25 Cooling/lubricating unit for steel processing Disc milling holder BT30, D=16 mm Disc cutter D=92 × 6 mm, Z=14, D=16 mm, carbide teeth TECHNICAL DETAILS - Double Mitre Saw Max. cutting length: 6,000 mm Min. cutting length at 90°: 335 mm Min. cutting length at 45°: 335 mm Saw blade diameter: 420 mm Cutting angle (rotation): pneumatically adjustable 90° and 45° inside, intermediate angles and 22.5° acute manually adjustable with digital display Cutting angle (tilt): pneumatically adjustable 90° and 45° inside Saw direction: saw blades move from bottom to top Control Control type: E580/1 Length adjustment: automatic with positioning control Saw blade tilt: pneumatically automatic between 90° and 45° Positioning accuracy: ±0.1 mm/m Positioning: pneumatic locking Operating system: Windows Saw unit Speed: 2,800 rpm Power per motor: 4,000 W (5.5 HP) Saw blade cooling: available Air consumption per cycle without cooling: 40 l Air consumption per cycle with cooling: 64 l Supply Electric connection: 230/400 V, 3-phase, 50 Hz Air connection: 7 bar Dimensions and Weight Length: 7,550 mm Width: 1,600 mm Height: 1,450 mm Weight: 1,750 kg EQUIPMENT Automatically closing protective covers Electronic positioning of the heads with +/- 0.1 mm/m accuracy Digital angle display for manually adjustable special angles Pneumatically adjustable saw blade rotational and tilt angles Operation via Windows control with 8.4" display and handwheel Cooling system for saw blades included Saw unit with bottom feed for optimal cutting force