Used Welding machines for sale (23)

Condition: good (used), Year of construction: 2012, Available week 40 2024 Hollinger The welding machine is equipped with: All welding times can be set profile-related. Welding accuracy 0.2 mm to outside dimension. Golpnw Heated clamping plates with interchangeable limiting knives on the welding mirrors. Automatically movable limiting dimensions (white 1.2 mm, colored 0.5 mm). Allowances with adjustable sealing knives. For shaping and cutting the inside corners. Smallest welding size small with thicker allowances 330 x 500 mm. Largest welding size 3800 x 3300mm. The heads retract to insert the profiles. Set to 5 mm burn-off (each side 2.5 mm). Rotox The cleaner is equipped with: Four-axis cleaner for fast cleaning. Automatic turning station with a gripper arm for gentle turning of large, heavy elements. Automatic turning up to 3,000 x 3,000 mm. Manual work without plasterer for small elements or U-frames. Tool carrier at the top: Sealing groove cutter. V-groove scraper blade. Pull-off knife 3 mm groove. Inside corner cutter normal protrusion. Inner corner cutter round protrusion. Inside corner cutter with groove. Horizontal seal groove for center seal. Tool carrier at the bottom: Pull-off blade V-groove. Puller blade 3 mm groove. Gasket groove cutter. Inside corner cutter normal protrusion. Inner corner cutter round protrusion. Puller blade half face offset. Outer contour disk for the outer corners.

Condition: good (used), Year of construction: 2008, Four-head welding machine URBAN AKS 1610, year of manufacture 2008, running direction from left to right, industrial PC, Windows control, large welding dimensions max. 3.5 x 2.3 m, seal hold-down device, good condition Bkatpnjhwec

Year of construction: 1987, Condition: used, table diameter 1200 mm table load 8 t swivelling range 135 Grad table length 1200 mm table width 1200 mm turning speeds 0,5 U/min total power requirement 2 kW Bljohttxwdi weight of the machine ca. 5 t dimensions of the machine ca. 3,0 x 2,0 x 0,8 m

Condition: like new (used), Year of construction: 2002, Functionality: fully functional, Machine/vehicle number: 7692, Type of input current: AC, CNC Welding Center 4 heads Hollinger MSE 0.2 MSE 0.2 + Rotox 572 deburring + cooling table, year of manufacture 2006, perfect working condition. Cpqrfudmzy The machine is available immediately - it is installed and working in Floresti, Cluj, Romania, 407280

Condition: excellent (used), Weld bead limitation 0.2 mm Right head angle adjustable 30° - 180 Cfwt7Y0Ope Welding length max. 2500 mm Set of support arms

Condition: good (used), Single Head Welding Machinery Cnxruvy0V3 Strongly welds white and colored PVC profiles at variable angles between 45° - 180° with 0.2 mm welding gap. Welds both colored and white profiles. With 0,2 mm welding seam restriction, melting and welding times are digitally adjusted. Long lasting heating plates distribute heat homogenously. It is easy and fast to clean of the heater plates. The special teflon system offers long lasting usage and easy change. Welding fixture changing system is practical. The profiles are clamped simultaneously by foot pedal switch.

Year of construction: 1992, Condition: used, table diameter - mm table load 2000 kg swivelling range 360 Grad vertical motion range 1380 mm Fzinb38 stroke speed 1900 mm/min total power requirement 4 kW weight of the machine ca. kg dimensions of the machine ca. 3540 x 2780 x 3310 mm

Condition: good (used), Year of construction: 2004, Four-head welding machine URBAN AKS 1605, year of manufacture 2004, running direction from right to left, industrial PC, Windows control, welding dimensions max. 2.5 x 2.3 m, high clamping dimension, good condition, available from end of February 2024 E7Y8Svk8 Cooling table optional

Year of construction: 2002, Condition: good (used), Functionality: fully functional, Single head PVCu window welding machines. Excellent condition, Easy to use fully ready for work. Power supply 230V. The welding angle of the product is changed from 30 ° -180 °. Dnudff

Year of construction: 1993, Condition: good (used), Urban double head welding machine AKS 1200 with weld bead limitation 2 mm useful length 2,50 m 2 angle welding heads welding of 2 corner joints at 90° angle Huwpmss in one operation

Condition: used, Length: mm height: mm power consumption: A welding current: 440 A V total power requirement: 24 kVA weight of the machine approx.: auf Anfrage kg dimensions of machine: 1,1 x 0,50 x 1,1 m Welding rectifier MIG / MAG with hose package 4 meters Ground cable and tongs wire feeder feed rate 0,5 - 24 m/min. Direct current Power range 50A / 16 V to 440 A / 36 V Cooling type F water cooled Protection class IP 22 Anschluß für Druckminderer Pw3Oxbqbdp

Year of construction: 2024, Condition: new, V-PERFECT TWO HEAD WELDING MACHINE Two heads welder for the simultaneous welding of 2 corners of a PVC frame in horizontal position without the necessity to clean welding seam (patent pending Seamless welding) Parallel welding system machine cycle programming for every profile (to decide individually at the order, DXF drawing) High welding precision, digital retroactivity control 2 mm cut error tolerance compensation corners, horizontal and vertical 0.7 profiles height self-adaptation Overcoming of the welding seam concept (no more present) Overcoming of the regulation PVC "burning" concept Smooth or profiled finishing (white or coloured profile) Operator pulpit: PC with monitor TFT, keyboard, mouse, USB port Ethernet interfacing with factory management Workshop space reduction for the absence of table turning pieces and cleaner Bs7Ifnn9T8 Profile height 58÷180 mm (superior values on demand) Profile width 40÷130 mm Sash and renewal frames automatic anti-overturn presser Sash automatic anti- rotation presser Magnetic locking higher countershim positioning system Universal rotating mold for profiles (white, coloured, foiled, acrylic etc.) Welding plates integrated automatic cleaning system Automatic temperature welding plates change according to the selected profile Digital control system with brushless motors connected with Ethercat net 11 axis interpolated positioning CNC control system Brushless armored spindles milling system, suction system chip integrated (exhauster optional) Barcode reader Height measuring profile system Enclosures for protection under the European Security (CE

Year of construction: 1991, Condition: used, table diameter - mm table load 3000 kg D7Vb33K swivelling range 360 Grad vertical motion range 1380 mm stroke speed 1900 mm/min 360 ° total power requirement 4 kW weight of the machine ca. 5400 kg dimensions of the machine ca. 3800 x 3700 x 4200 mm

Condition: excellent (used), Year of construction: 2016, TKB 36/25 cooling and transport table, 3,600 mm wide, year of construction 2016 D7Vapcw

Condition: used, for welding transoms using the butt welding process, clamping height of the machine height of the machine 30 - 90 mm, optical display of the reheating time, H2Pdnhenf incl. equipment set, consisting of: Profile stop and welding mirror (for welds up to the visible surface, limiting knives are required at the front front and rear), turret stop for clamping height, incl. support support arms, without profile-specific tools, Paint finish: RAL 7035/1033 light gray/dahlia yellow

Condition: new, Year of construction: 2024, Functionality: fully functional, Machine/vehicle number: SÇ 101 S PVC Tek Köşe Kaynak Makinası, - Conforms to CE standards. - Weldable angle : All angles between 25 - 180 degrees. - Welded profile maximum height 150 millimeters - Minimum height of welded profile 40 millimeters - Upper pistons are individually compressible - Left moving table system available Camlwedtha - Profile clamping is practically done with the pedal - PLC control system available - The heating unit has thermostatic control - The degree of the heating plate can be easily changed via the digital display - Heat temperature, welding time and pressure can be adjusted for different profile types - Time saving thanks to easy mold change system.

Condition: used, Length: mm height: mm power consumption: A capacity at 100% ED: 400 A capacity: 60% ED = 500 A welding current: Gleichstrom V weight of the machine approx.: 230 kg Bunn3Gb2Zc dimensions of machine: 1,05 x 0,70 x 1,2 m capacity: 21 kVA Welding rectifier MIG / MAG Cooling type F Protection class IP 23 Isolation class F incl. wire feed device, feed rate 0,5 - 20 m/min

Year of construction: 2024, Condition: new, SEAMLESS WELDING MACHINE Welding machine for sashes and frames made of PVC profiles and 1 or 2 transoms Welding in horizontal position without necessity to clean welding seam (Patented Seamless welding) Easy profile positioning Parallel welding system machine cycle programming for every profile to weld (to set individually at the order, DXF drawing) High welding precision, digital retroactivity control 2 mm tolerance horizontal and vertical cut errors compensation 0.7 mm profiles height self-adaptation Smooth or profiled finishing (white or coloured profile) Operator pulpit with PC with monitor TFT, keyboard, mouse, USB port Ethernet interfacing with factory management Workshop space reduction for the absence of the table turning pieces and of the cleaner Profile size: height 58÷180 mm; width 40÷130 mm; transom height 58÷100 mm; width 50÷130 mm Sash and renewal frames anti-overturn automatic presser Sash automatic anti-rotation presser Top countershim magnetic locking positioning system Universal rotating mold for profiles (white, coloured, foiled, acrylic, etc.) Integrated automatic welding plates cleaning system Automatic welding plates temperature change according to the selected profile Minimum welding size 400 x 800 mm with profile height 70 mm Brushless motors digital control system connected with Ethercat net Bs7Ilvwvyt CNC control 27 axis interpolated positioning system Milling system with brushless spindles armored, suction system chip integrated (exhauster optional) Output profiles conveyor Barcode reader Measuring height profile system External welded element size: min 400 x 800 mm. with profile width 70 mm.Overall dimensions: 6800x 5000 x 2500 mm Enclosures for protection under the European Security (CE)

Condition: used, for welding transoms using the butt welding process, clamping height of the machine height of the machine 30 - 90 mm, optical display of the reheating time, incl. equipment set, consisting of: Profile stop and welding mirror (for welds up to the visible surface, limiting knives are required at the front and rear), turret stop for clamping height, without support arms and profile Czwzjtmse3 and profile-specific tools, painting:

Condition: used, Length: mm height: mm power consumption: A Pbcff capacity at 100% ED: 400 A capacity: 60% ED = 500 A welding current: Gleichstrom V weight of the machine approx.: 230 kg dimensions of machine: m capacity: 21 kVA Welding rectifier MIG / MAG Cooling type F Protection class IP 23 insulation class F incl. wire feed device, feed rate 0,5 - 20 m/min Ground cable/pliers Hose package 4 meters new

Condition: used, Length: mm Cidmirkvzm height: mm welding current - continuous: 400 A protection class: IP21 total power requirement: 23,2 kVA kVA weight of the machine approx.: 128 kg dimensions of machine: 1,3 x 0,5 x 0,9 m - E-welding and TIG - DC welding current - Cooling mode AF -control switching 2/4 cycle spot welding, stepless The following components have been replaced by NEW ones: -hose package 4.0 meters -ground clamp and ground cable 4,0 meter -pressure reducer

Condition: used, Length: mm height: mm Betawluhjq welding current - continuous: 320 A protection class: IP21 total power requirement: 17 kVA kVA weight of the machine approx.: 132 kg dimensions of machine: 1,3 x 0,6 x 0,9 m TIG with 2-stroke; 4-stroke; spot welding and pulse welding Switching from 2-stroke to 4-stroke Cooling mode AF New components like: -hose package 4.0 meter, water cooled -mass tongs and mass cable 4.0 meters -pressure reducer

Condition: used, Length: mm height: mm welding current - continuous: 320 / 100 A protection class: IP21 total power requirement: 17 kVA kVA weight of the machine approx.: 132 kg dimensions of machine: 1,3 x 0,5 x 0,9 m - TIG welding with direct current - TIG welding with pulsed current Nl87R - E-hand welding Control switchover 2/4 cycle spot welding, stepless New components like: -hose package 4,0 meter, water cooled -ground tongs and ground cable 4,0 meter -pressure reducer -TIG welding torch ERGO 301