5-axis machining center

Reiden RX10

Condition: excellent (used), 5-Axis Machining Center with swivel milling head, pallet station, tool calibration, thermal compensation, work area extraction system, and much more. Year of manufacture: 2016 Spindle hours approx. 1,500 h (after spindle replacement at the beginning of 2025) Control System: - Heidenhain iTNC 530 HSCI - Heidenhain DCM Collision Monitoring - Heidenhain HR 410 electronic handwheel - Swiveling console with 19" monitor - Teleservice via LAN/WLAN Travel Range: - Travel X 1,000 mm, Y 1,100 mm, Z 810 mm - NC rotary table D 1,000 x 800 mm, swing diameter 1,350 mm Milling Head: - Automatic horizontal/vertical swivel milling head - Fully-fledged stepless NC axis from -1° to +90° - Blowing air through the spindle - External coolant supply via nozzle ring Drive power: 38 kW (100% duty cycle) Speed: 16,000 rpm Torque: 135 Nm at 40% duty cycle Spindle interface: HSK 63-A Media Supply: - Internal coolant feed: 50 bar - capacity 28 l/min - Paper belt filter with additional fine filter - Individual tool pressure regulation during program operation Tool Changer: - Rack magazine with 73 stations (expandable with additional racks) - Swiveling dialog operation panel - Drawer for loading and unloading tools from tool racks Tool Measurement: - 3D wireless touch probe m&h 20.00-Multi, software adapted for HSK 63-A - Including Kinematics-Opt, compatible with iTNC control, and calibration sphere on magnetic stand Pallet Changer: - Double palletizing unit, pallet diameter 1,000 x 800 mm, hole grid 100mm x 100mm, hardened drill bushes D 16mm - Rotary table unit including zero-point clamping system, loading station accessible by crane - Pallet changer unit protected with enclosure Special Equipment: - Micro-Epsilon sensor - For detection and dynamic compensation of thermal spindle growth Chip Conveyor: - Scraper belt conveyor along machine bed - Chip ejection height 1,100 mm Machine Enclosure: - Full-area protective enclosure with large angle door for crane loading and a quick-access door - Easy removal of swarf from the workspace Extraction System: - Oil and emulsion mist extraction, mechanical air filter, extraction capacity 1,800 m³/h Nwsdpfsxhg Disx Abrjn Rotating View Window: - Viewing window integrated into the cabin door for workspace observation Camera in Work Area: - Monitor and keyboard at the operator console—allows monitoring of rear-side machining operations Machine Data: - Space requirement (without service area): approx. LxWxH 4,791 mm x 4,100 mm x 4,791 mm (including extraction system) - Machine weight approx. 19,700 kg - Total weight with all equipment plus maximum workpiece load, full tool magazine, and all operating materials: approx. 27,730 kg - Connected load: 50 kVA, 400V, 50/60 Hz This machining center, featuring an exceptionally good and practical configuration, is in very good condition. It operates with the renowned "Swiss precision." There is no service or repair backlog—in fact, the opposite. With an almost new milling spindle, the REIDEN RX 10 5X is well positioned for long-term use. Technical modifications and errors excepted.

Condition: ready for operation (used), Year of construction: 2008, - USED - 5-AXIS BRIDGE-TYPE VERTICAL MACHINING CENTRE     X-AXIS TRAVEL: 1750 mm Y-AXIS TRAVEL: 1400 mm Z-AXIS TRAVEL: 600 mm RAPID FEEDS X-Y-Z: 35 m/min SPINDLE: 18000 rpm; 18,5-25 kW; HSK A63 TABLE SIZE: 1000 x 1200 mm MAX ADMITTED LOAD: 5000 Kg Nwodpfx Abewl R Ddsrsn TOOL MAGAZINE: A CATENA ; 30 POS HEAD: A/B AXIS AUTOMATIC CONTROL UNIT: HEIDENHAIN iTNC 530 WEIGHT: 18000 Kg OVERALL DIMENSIONS: 6000 x 4000 x 3850 mm ACCESSORIES: SWARF CONVEYOR ; PORTABLE HANDWHEEL ; LASER TOOL SETTER

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 675 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 620 HSCI, spindle speed (max.): 10,000 rpm, Equipment: documentation/manual, MIKRON VCE 1200 PRO VERTICAL MACHINING CENTER, YEAR OF MANUFACTURE 2015 EQUIPPED WITH HEIDENHAIN TNC 620 HSCI CONTROL ELECTRONIC HANDWHEEL TRAVELS: X 1200, Y 600, Z 675 MM TABLE SURFACE: 1220 x 620 MM 40-TOOL RANDOM TOOL CHANGER SPINDLE: 10,000 RPM, 18 KW DUAL CHIP CONVEYOR LINEAR SCALES Nwodpjy Tvw Ejfx Abrsn INTERNAL COOLANT SYSTEM: 30 BARS LASER TOOL MEASUREMENT PROBE PREPARATION FOR WORKPIECE MEASUREMENT PROBE (PROBE NOT INCLUDED)

Condition: used, Year of construction: 2011, operating hours: 10,550 h, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, torque: 84 Nm, controller manufacturer: Heidenhain, controller model: iTNC530, workpiece weight (max.): 1,200 kg, table width: 600 mm, table length: 1,400 mm, table load: 1,200 kg, spindle speed (max.): 20,000 rpm, operating hours of spindle: 10,550 h, coolant supply: 70 bar, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Selling a top-maintained Mikron HPM 1200 HD, manufactured in 2011, equipped with a Heidenhain iTNC530 control system. Travel ranges: X: 1200mm Njdpfezkbr Tex Abrown Y: 600mm Z: 500mm Equipment: Table dimensions: 1400 x 600mm Table load capacity: 1200kg Control system: Heidenhain iTNC530 Chip conveyor Spindle mount: HSK-A63 Spindle speed: 20000 RPM Tool changer: 60 positions Electric handwheel Tool measurement 3D probe IKZ 70 bar Weight: 15 tons Accessories: 20 tool holders HSK-A63 2 vices Complete documentation Machine feet The machine can be inspected and tested under power after prior appointment.

Condition: ready for operation (used), Year of construction: 2023, A Mitutoyo CNC bridge coordinate measuring machine is available. Travel X/Y/Z: 1200mm/2000mm/1000mm, measuring volume: 2.4m³, max. workpiece weight: 2500kg, max. workpiece height: 1000mm, probe system: Renishaw, probe positions: 20, measuring accuracy: 2.3+/-0.3/100µm, max. travel speed: 693mm/s. Machine dimensions X/Y/Z: approx. 3400mm/2200mm/3600mm, weight: approx. 6150kg, control: Mcosmos-3 V4.3. Documentation available. An on-site inspection is possible. Nwedpfx Ajzhnrbsbron

Year of construction: 1982, condition: used, Technical details: z-travel: 260 mm pressure capacity max.: 49 - 7355 (Prüflast) N checking height: 260 mm workpiece weight: max. 160 kg throat: 200 mm interface: RS 232 voltage: 230V / 50Hz V total power requirement: 200 VA machine weight approx.: 250 (ohne Unterschrank) kg dimension machine xH: 0,7x 0,6 x 1,8 (mit Unterschrank) m The hardness tester with depth measurement operating mode is on sale with a base cabinet from Emco for hardness testers. The device is suitable for testing the following methods(Specifications according to manufacturer): Metals according to Brinell, Vickers, Rockwell Plastics testing according to DIN 53 456 Other materials for testing only after consultation with the manufacturer. Test loads: electronically controlled via microprocessor, DMC and DC motor for M4R-075 = 49 to 7355 N Test table height adjustable via handwheel; Ø 90mm Test bench mounting according to DIN 51 225 = Ø 25mm Operation and programming via control panel accessories: a few test tables and plates (comparable with the pictures) Nsdou N Avxjpfx Abrjwn *

Condition: good (used), Year of construction: 2023, functionality: fully functional, Brother W-1000 XD1, Nodpszzlmcjfx Abrswn Year of manufacture 2023 / Commissioned 2024, CNC control system, X/Y travel 1000/500 mm, Z travel 480 mm + column extension of 150 mm, 4-axis NC swivel head Brother T 200 with counter bearing, Spindle speed up to 16,000 rpm, BBT 30 tool holder, High-speed tool changer, 21 positions, Internal coolant pressure 15 bar, Side loading by robot, Twin chip disposal system, Extraction system, 2 x rotary joint, 4 channels, Workpiece clamping pressure 80 - 210 bar, Tool breakage monitoring Renishaw, Robot interface, Part clamping control, Robot cell, Fanuc robot, 6 axes - payload 25 kg, Automatic part loading and unloading via a 212-station pallet system.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, 5-axis machining center Hedelius ACURA 65, including standby magazine Control system: TNC 640 Year of manufacture: 2017 Internal machine number: 80 Travel distances: X-axis: 700 mm Y-axis H / V: 650 / 465 mm Z-axis: 600 mm Rotary-swivel table: Ø 650 x 540 mm Swivel range: +30° to -115° Table load: 500 kg Mount: DIN 69871 AD 40 Tool magazine: 65 positions Spindle speed: 50 - 14,000 rpm Accessories Standby magazine with 180 spaces Incline bed coolant system SKM 900 Chip conveyor LTA extraction system 3D measuring probe Coolant gun KinematicOpt Nwjdpfx Aboz Ix Uwsren

Condition: ready for operation (used), Year of construction: 2017, operating hours: 5,184 h, travel distance X-axis: 1,000 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 620 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC530 HSCI, table load: 1,000 kg, overall weight: 5,500 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 17,000 W, number of slots in tool magazine: 30, number of axes: 4, This 4-axis Avia VMC 1000 was manufactured in 2017. It features a generous X-axis travel of 1000 mm, Y-axis travel of 540 mm, and Z-axis travel of 620 mm. The machine is equipped with a robust table size of 1200 x 540 mm and a maximum table load of 1000 kg. If you are looking to get high-quality machining capabilities, consider the Avia VMC 1000 vertical machining centre we have for sale. Contact us for further details. • Table size: 1200 x 540 mm • Spindle-to-table distance (min/max): 150 / 770 mm • Working feed: 0–35 m/min • Rapid traverse (X/Y/Z): 35 / 35 / 35 m/min • Spindle motor power (S1 100% / S6 25%): 10 / 17 kW • Condition: Machine in top condition with very low hours - the spindle has only 5184h! Nwedpfxezcyx Rs Abron Additional equipment • Spindle through-coolant, 20 bar • 4th axis preparation with 200 mm table, base, and 3-jaw chuck • Heidenhain TS 640 infrared workpiece probe • Heidenhain TT 160 tool probe • Oil mist collector (Mistresa, Japan) • Tool cooling with compressed air, 5 bar • Coolant oil separator Technical Specification Taper Size ISO 40

Condition: excellent (used), Deep hole drilling machine tools DEGEN - UTB MACH-ID 9188 Make: DEGEN Type: UTB Nwedox Tp Ahopfx Abron Year: 2005