Hardness Tester

Emco testM4R-075

Condition: ready for operation (used), Year of construction: 1989, This MORI SEIKI SL 25 was manufactured in 1989. It is a horizontal turning machine equipped with a three-jaw chuck, dead-collet head, chip conveyor, and tailstock. Clamping wedges for tools are also included. Consider the opportunity to buy this MORI SEIKI SL 25 horizontal turning machine. Contact us for more information. Gtodpsx D R Rrofx Ah Sow • Tailstock Additional equipment • Three-jaw chuck and dead-collet head 185e • Chip conveyor • Clamping wedges for tools

Condition: used, Year of construction: 2005, Technical details: turning diameter: 275 mm turning length: 900 mm spindle passage: 65 mm power capacity at 100 % load: 25/20 kW spindle turning speed range: 1 - 5000 U/min spindle diameter in front bearing: 110 mm c-axis: 1 - 500 U/min. number of workpiece supports: 4 tool turret: 1 x-axis: 290 mm y-axis: 165 mm z-axis: 360 mm b-axis: 360 ° rapid speed: 18/30 m/min number of tools: 2x2 + 2x2 number of driven tools: 2x2 + 2x2 mm toolpiece turning speed range: 8000 / 2000 U/min power capacity: 25% ED 5,8 kW tool taper: TRAUB 60 tool turret: 2/3/4 x-axis: 170 mm z-axis: 600/950 mm y-axis: +/- 60 mm rapid speed: 18/15/30 m/min number of driven tools: 10 mm toolpiece turning speed range: 1 - 6000 U/min power capacity: 25% ED 5,8 kW tool taper: DIN 69880 40 x 63 total power requirement: 95 kW Gtjdpfx Ahswp D Nbj Sew weight of the machine ca.: 16 t dimensions of the machine ca.: 10,0 x 3,5 x 3,0 m with CNC TRAUB TX 8i, Barloader TRAUB Stamag DNH61 / 3000, Main and Sub spindle with C-axis 1 support with B-axis 3 turret supports dust exhauster, coolant attachment with coalescence-seperator and chip conveyor 2 pc. 3-jaw chuck SMW KNCS-N 170-43 2 pc. HAINBUCH Spanntop chuck 40 pc. various tool holder non-driven 6 pc various tool holder driven Spare parts package *

Condition: excellent (used), Year of construction: 2010, MORI SEIKI DuraVertical 5060 Year: 2010 Control MSX-504 III x-travel 600mm y-travel 530mm z-travel 510mm Main spindle: turning speeds max. 10.000min/-1 power capacity - main spindel 15 / 11kW tool taper BT 40 spindle bearing diameter 70mm distance spindle /table 150 - 660mm work table: table surface area 900 x 600mm max. table load 500kg T-slots 6x 18mm turret: number of toolpositions 30pos. tool taper BT 40 max. tool diameter 80mm max. tool-dia with free toolbox 125mm max. tool length 300mm max. tool weight 8,0kg feeds: rapid traverse ( X / Y / Z ) 36 / 36 / 20m/min feed speeds max. 6.000mm/min Tipp feed 0 - 5.000mm/min total power requirement 27kVA weight of the machine ca. 5,8t dimensions of the machine ca. 3,5 x 3,0 x 2,8m Accessories/options: 4.axis rotary table tool holders BT40 type, 30 pieces Gedpfjxq Hlxox Ah Sjtw precision vice swarf conveyor coolant tank documentations

Condition: good (used), turning length: 500 mm, turning diameter: 300 mm, spindle bore: 62 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 210 mm, travel distance Z-axis: 520 mm, Mori Seiki SL-15 CNC Turning Center Machine Type: CNC Turning Center (2-Axis) Serial Number: 1899 Control System: Mori Seiki MSC-516 Maximum Turning Diameter: approx. 300 mm Maximum Turning Length: approx. 500 mm Swing Over Bed: approx. 510 mm Axis Travels X-Axis Travel: approx. 210 mm Z-Axis Travel: approx. 520 mm Spindle Nose: A2-6 Spindle Bore: approx. 62 mm Maximum Spindle Speed: approx. 4,000 rpm Spindle Motor Power: approx. 11 / 15 kW Tool Turret: 12-Station Tool Size: 25 × 25 mm Equipment & Features Hydraulic Tailstock Tool Presetter 6.5" 3-Jaw Power Chuck Coolant System Gtedpfxox Hp Ikj Ah Sow Machine Weight: approx. 4,000 kg Machine Dimensions (L × W × H): approx. 2,700 × 1,600 × 1,700 mm

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 107.44.00.407, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 500 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, workpiece weight (max.): 500 kg, total height: 3,200 mm, total width: 3,200 mm, table width: 600 mm, table height: 2,400 mm, table length: 600 mm, rotational speed (min.): 50 rpm, rotational speed (max.): 20,000 rpm, overall weight: 10,000 kg, spindle speed (max.): 20,000 rpm, spindle motor power: 15,000 W, number of spindles: 1, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The MIKRON UCP 800 Duro, manufactured in 2018, is a high-performance 5-axis machining center equipped with a Heidenhain iTNC 530 control system. The machine offers travel paths of 800 x 650 x 500 mm (X/Y/Z) and features a C-axis with an endless 360° swivel range. The installed spindle/adapter types are NCD 150 PL and NCD 200 PL with HSK-E63 interface. The illustrated table system is currently not mounted. The machine comes equipped with a chip conveyor, a coolant system with filter, as well as complete documentation. The machine is available free loaded on truck (FCA) and has seen very little use overall. Gjdpjx D Ux Tjfx Ah Sjtw The operating hours clearly indicate: Control ON: 30,064 h Machine ON: 10,322 h Program Execution: 4,159 h Drives ON: 7,331 h Spindle ON: 4,231 h The machine is under power and can be demonstrated at any time.

Condition: used, Year of construction: 2012, Used 2011 YCM NDV102A Vertical Machining Centre. Supplied with 12,000 RPM Spindle, 30-station ATC, Swarf Conveyor, Coolant Equipment & Manual Set. SPECIFICATION: TRAVELS: - X Axis: 1,020 mm - Y Axis: 600 mm - Z Axis: 600 mm - Spindle Nose to Table (~ max): 700 mm - Spindle Nose to Table (~ min): 100 mm​ TABLE: - Length: 1,120 mm - Width: 650 mm - T-Slot Width: 18 mm - Number of Std T-Slots: 6 - Max Weight on Table (evenly distributed): 1,000 kg​Machinery Resources International SPINDLE: - Max Rating: 15 kW (20 hp) - Max Speed: 12,000 rpm - Drive System: Direct Speed Belt Drive - Taper: Big Plus BBT40 - Bearing Lubrication: Oil Injection - Spindle Chiller FEEDRATES: - Rapid and Jog (Max.): 24 m/min AXIS MOTORS: - Axis Motor Rating X/Y/Z: 2.29/2.29/3.3 kW​ Gedpfx Aowfdzcoh Setw TOOL CHANGER: - Type: Side mount - Capacity: 30T - Max Tool Diameter: 76 mm - Tool Length Max.: 300 mm - Tool Weight Max.: 6 kg - Tool Change Time: 2.5 sec​ GENERAL: - Air Required: 78.2 psi/min - Power Supply: 400 V / 3 Phase - Coolant Capacity: 360 L - Machine weight 7,000kg Control: Heidenhain TNC i530 Spec: Travel X1020 Y600 Z600 mm | 12000RPM | BBT40 Accessories: Through spindle coolant, hi torque spindle motor, 30 tool side mount ATC

Condition: excellent (used), Year of construction: 2010, Heidenhain iTNC 530 control Travel paths X/Y/Z: 1200 x 900 x 500 mm Spindle speed: 16,000 rpm Tool magazine for 30 tools + additional magazine for 57 tools, HSK-A 63 Internal coolant supply 40 bar Gsdeynw Eropfx Ah Sjtw Chip conveyor Heidenhain measuring probe Blum laser system

Condition: used, LECO LM - 100 AT Small load and micro hardness tester Gedpfxertn D Is Ah Setw Year of construction: 2010 Test force ranges from 0.001 - 2 kgf Manual or automatic turret with up to 4 objectives and 2 test diamonds simultaneously PC is included in the scope of delivery --> Software could not be tested as the graphics card is missing. You are welcome to come by for a viewing. We are happy to arrange a cost-effective shipping company for you. organize! You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: like new (used), Year of construction: 2012, operating hours: 24,864 h, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 375 mm, controller manufacturer: Heidenhain iTNC 530, workpiece diameter (max.): 380 mm, workpiece weight (max.): 2,500 kg, total height: 2,480 mm, total length: 1,970 mm, total width: 2,730 mm, overall weight: 6,900 kg, spindle speed (min.): 18,000 rpm, spindle motor power: 35,000 W, Year of construction: 2012 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 400 Y-axis travel mm: 400 Z-axis travel mm: 375 C-axis degrees: 360º (0,001) B-axis degrees: -5º / +110º Distance spindle nose - table surface mm: 125-500 Feed rates m/min: 80 Rapid traverse m/min: 80 Acceleration in the axes m/s2: 10 Milling/turning table nc: Table dimensions mm: 450x400 Maximum workpiece size (D x H) mm: Ø380 Max. workpiece weight kg: 250 Table rotation speed rpm: 1200 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 35/25 (40%ED/cont) Spindle torque Nm: 130/87 Cooling Cooling through the Spindle Center bar: 40 Tool system Tool holder: HSK-A 63 Tool magazine slots: 30 Equipment Chip conveyor Infrared probe Rinsing gun blowing air through spindle center selectable via M-function Signal lamp Laser tool measurement for measuring tool length and diameter 3D quickSET Heat compensator Direct measuring system XYZ Electrical cabinet active cooling unit Oil skimmer Ready for internal cooling (40/80 bar) RENISHAW Measuring probe Gtodpfjyi Am Djx Ah Sew Automatic door Machine running times Under power: 46650 Spindle Working: 24864 Rated power kVA: 46 Basic machine dimensions / weight Length mm: 1970 Width mm: 2730 Height mm: 2480 Weight kg: 6900

Condition: ready for operation (used), Year of construction: 2008, - USED - 5-AXIS BRIDGE-TYPE VERTICAL MACHINING CENTRE     Gsdpfewl R Ddox Ah Setw X-AXIS TRAVEL: 1750 mm Y-AXIS TRAVEL: 1400 mm Z-AXIS TRAVEL: 600 mm RAPID FEEDS X-Y-Z: 35 m/min SPINDLE: 18000 rpm; 18,5-25 kW; HSK A63 TABLE SIZE: 1000 x 1200 mm MAX ADMITTED LOAD: 5000 Kg TOOL MAGAZINE: A CATENA ; 30 POS HEAD: A/B AXIS AUTOMATIC CONTROL UNIT: HEIDENHAIN iTNC 530 WEIGHT: 18000 Kg OVERALL DIMENSIONS: 6000 x 4000 x 3850 mm ACCESSORIES: SWARF CONVEYOR ; PORTABLE HANDWHEEL ; LASER TOOL SETTER