Cnc turning and milling center

OKUMA Multus U3000 1SW-1500

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, MAZAK QUICK TURN NEXUS 100-II MSY Max. machining diameter: 280 mm Max. machining length: 400 mm Max. milling speed: 4,500 rpm Max. spindle speed: 6,000 rpm Max. bar diameter: 42 mm Cjdoy S A Rispfx Ab Ujrf Machine is equipped with: - CNC control: Mazatrol Matrix - KITAGAWA 3-jaw chuck B-206 for main spindle - KITAGAWA 3-jaw chuck B-205 for 2nd spindle - Tool Eye - C-axis - Y-axis - Interface for bar loader magazine - Automatic parts catcher - Reinforced coolant pump - 8 units of fixed tool holders - 2 units of powered tool holders

Condition: excellent (used), Year of construction: 2007, TECHNICAL DETAILS CNC Control: FANUC 18i-TB X1/X2 Axis mm: 555/185 Z1/Z2 Axis mm: 1,095/1,140 Y Axis mm: 160 (+/- 80) B Axis mm: 240 (+/- 120) Maximum Turning Diameter mm: 550 C Axis Increment: 0.001° Maximum Turning Length mm: 1,020 Cutting Feed Rate mm/min X,Z,Y: 500 Rapid Traverse Speed mm/min: X1, Z1: 24,000 Y: 16,000 B: 27,000 C: 200 (Z2: 24,000) (X2: 24,000) Swing Over Bed mm: Ø 750 Swing Over Cross Slide mm: Ø 600 Bar Capacity mm: Ø 65 (main) / Ø - (sub) Max. Rapid Traverse m/min X,Z,B-Y: - Spindle / Sub-Spindle: - Spindle Speed rpm: 5,000 Spindle Power kW: 22/15 Torque Nm: - Main Spindle Bore: - Main Spindle Nose: A2-6 Milling Head: - Spindle Speed rpm: 10,000 Spindle Power kW: 15/11 Torque Nm: - Taper Type: CAPTO C6 Number of Tools in Magazine: 40 Turret: - Turret Positions: - Number of Driven Tool Stations: - Driven Tool Speed rpm: - Driven Tool Power: - EQUIPMENT Chip Conveyor, Hinged Belt Type: Included Bar Feeder Interface Adjustment Control: Included MACHINE DIMENSIONS Codpjxxdmiefx Ab Uorf Length mm: 6,070 Width mm: 2,682 Height mm: 3,011 Weight kg: 15,500

Condition: used, Year of construction: 1999, functionality: fully functional, turning length: 497 mm, turning diameter: 300 mm, travel distance X-axis: 180 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 575 mm, Mazatrol PC Fusion CNC 640T CNC control 3-jaw chuck 12-fold revolver C-axis driven tools Csdpfxszmd Tls Ab Usrf Y-axis tool presetting device (tool eye) tail stock chip conveyor coolant device bar loading device for 3m bars 14 fixed tool holders 8 driven tool holders Technische Daten: / technical details max. Drehdurchmesser / max. turning diameter 300 mm max. Schwingdurchmesser / max rotary diameter 525 mm max. Drehlänge / max. turning length 497 mm Drehzahl / spindle speed 35-4000 UpM/ rpm Anzahl der Revolverplätze / numbers of tool places 12 X-Verfahrweg / x-travel 180 mm Z-Verfahrweg / z-travel 575 mm Y-Verfahrweg / y-travel +-50 mm Futterdurchlass / spindle hole diameter 62 mm Eilganggeschwindigkeit X, Z / rapid feed X, Z 30, 30 m/min. Gewicht der Maschine ca. / weight ca. 5500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 2,800 rpm, travel distance X-axis: 280 mm, travel distance Z-axis: 830 mm, spindle motor power: 30,000 W, total height: 1,915 mm, total width: 2,035 mm, overall weight: 5,650 kg, product length (max.): 3,821 mm, number of axes: 3, This 3-axis DOOSAN Puma GT 3100 M was manufactured in 2022. It features a maximum turning diameter of 376 mm and a turning length of 725 mm. The machine is equipped with a 12-station tool turret and a three-jaw power chuck diameter of 305 mm. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma GT 3100 M horizontal turning machine we have for sale. Contact us for further details. • Siemens S828D control touchscreen with ShopTurn 15-inch display • 3-axis CNC horizontal turning machine with driven tools and tailstock • C-axis main spindle: 360° resolution 0.001° • C-axis speed: 200 rpm • C-axis torque: approx. 1162 Nm • Swing diameter over bed: 720 mm • Swing diameter over cross slide: 590 mm • Max turning diameter: 376 mm • Max turning length: 725 mm • Main spindle bore: 115 mm • Bar capacity: 103 mm • Spindle nose: ASA A2-11 • Max torque: approx. 1112 Nm • Rapid traverse X-axis: 24 m/min • Rapid traverse Z-axis: 30 m/min • Feed force X-axis: 9465 N • Feed force Z-axis: 17379 N • Three-jaw power chuck diameter: 305 mm with soft jaws • 12-station tool turret with BMT65P tool holders • Max driven tool speed: 5000 rpm • Driven tool power: approx. 7.7 kW • Driven tool torque: approx. 75 Nm Cjdpfxey E I Hio Ab Uerf • Tailstock with quill diameter: 100 mm • Quill stroke: 100 mm • Hydraulic clamping system with hollow cylinder • Monoblock cast iron machine bed, Meehanite construction • 30° slant bed design • Hardened and ground guideways with low-friction coating • Automatic central lubrication • Coolant system: 7 bar pressure • Coolant tank capacity: approx. 235 liters • Hydraulic tank: approx. 20 liters • Full enclosure with working area lighting • Bar feeder interface • Oil skimmer • Electronic safety clutch for X and Z axes • Electrical connection: 400 V, 3-phase, 50 Hz • Total power: approx. 47 kVA • Unused (like new) Additional equipment • OPTIONAL: HALTER LoadAssistant Universal Big 70 (robot) • Gripper for Doosan Universal Big 70 • Turning station • Workpiece support • Base plate 23 mm / 175 mm Big 70 • Machine interface box Technical Specification Counter Spindle No Driven Tools Yes

Condition: good (used), Year of construction: 1999, EMCO PC MILL 125 CNC Machining Center Siemens Sinumerik Brand: EMCO Model: PC MILL 125 Serial No.: F1D V00 Year: 1999 Control: Siemens Sinumerik 810M Technical Features: Travels (X, Y, Z): 185, 125, 200 mm Vertical travel (Z-axis): 100 mm Crsdpev S Tx Eofx Ab Usf Distance between headstock and table surface: 95-195 mm Table: 420 x 125 mm Maximum load on table: 10 kg Spindle bearing: Diameter 40 mm Taper: SK30 Tool clamping: Automatic Motor speed: 5000 rpm Speed range: 150-5000 rpm Maximum cutter diameter: 25 mm Accuracy: 0.00125 mm Number of tool stations: 10 Maximum tool diameter: 55 mm Maximum tool weight: 700 g Dimensions: 1730 x 875 x 1892 mm Weight: 570 kg All machine and numerical control manuals are included.

Condition: good (used), CMZ brand CNC lathe, TX66 Y2 Quattro model, year 2012, with powered tooling on both turrets, Y-axis... Crsdpfxjzcu Hie Ab Uef

Condition: used, Year of construction: 1998, operating hours: 97,593 h, functionality: fully functional, turning diameter: 65 mm, spindle bore: 79 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 25 rpm, For Sale: Gildemeister MF Sprint 65 CNC Sliding Headstock Lathe with 3-Meter Bar Feeder, as shown in the pictures. The machine was removed from our workshop in fully functional condition. A video of the machine in operation prior to disassembly is available upon request. Approximately five years ago, the linear guides of the X1 and Z1 slides (on the main spindle side) were replaced, including bearings and belts. A new HMI interface was installed recently. Detailed specifications and technical data can be found in the attached PDF. TECHNICAL DATA Control: Sinumerik 840C Bar Feeder: SIMAG 65.1-3200G, Year of Manufacture: 1998 Bar Length: 3 meters Bar Diameter / Spindle Bore: 65 mm Main Drive Power Output: 28 / 21 kW Speed Range: 25 – 4,500 rpm Torque: 320 / 240 Nm Maximum Feed Rate for Thread Cutting: 10 m/min C-Axis Speed: 120 rpm C-Axis Torque (Holding Torque): 180 Nm Tool Carrier Number of Tool Stations: 8 Shank Diameter (DIN 69880): 30 mm Number of Driven Tool Stations: 4 Power Output: 7.6 / 4.6 kW Torque: 24 / 14.7 Nm Maximum Speed of Tool Carrier 1: 4,000 rpm Maximum Speed of Tool Carrier 2: 4,000 rpm Slide 1 Cross Travel / Longitudinal Travel: 155 / 280 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN Slide 2 Cross Travel / Longitudinal Travel: 82 / 120 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN MACHINE DATA Dimensions with Bar Feeder and Chip Conveyor (L × W × H): approx. 6 × 2 × 2 meters Weight: approx. 6.5 tons Operating Voltage: 50 Hz, 400 V Accessories: Cooling System Chip Conveyor Documentation The offer is subject to change and non-binding, changes and errors in the technical data or the equipment, as well as prior sale reserved Used machines are purchased as seen, without warranty claims. Delivery ex works excluding packaging and insurance, unless otherwise agreed. The price does not include statutory value added tax. As is usual with used machines, payment is made before loading. Codpfswym Nfox Ab Uerf

Condition: new, Year of construction: 2026, TITAN DOUBLE Trade Industrial Company AB is a Polish manufacturer of modern professional equipment trusted by professionals in over 55 countries worldwide. Industrial printer TITAN DOUBLE is designed for inkjet large format contactless full-color CMYK printing. OUR ADVANTAGES = YOUR BENEFITS: TITAN DOUBLE The new printing machine from TICAB PRINT has two print heads. Now, you can print in a single pass on large items. Your benefits: Credpfsvt Uvzox Ab Uef • Enhanced workflows. • Wider range or samples to print on. • More comfort during printing. We are official partners of the Hewlett Packard Company. You can get the TITAN DOUBLE printing machines at the manufacturer’s price. Online education and full technical support is provided. KEY FEATURES of TITAN DOUBLE: 1) Average printing speed is 50 units per minute. 2) The opportunity to print from 1 copy without increased cost per piece. 3) No preparations or cliches are needed. 4) Low cost per copy is from 0.01 euro/unit (you will see an accurate amount on the monitor during printing). 5) Printing on different materials: paper, carton (assembled and disassembled boxes), textile, wood, and plywood. 6) Branded software from TICAB PRINT (included in the printer's price). 7) Printer's components and accessories of our own design and production. TITAN DOUBLE is an innovative printing system. It allows you to feed huge items beneath the printer head. Printer heads can be adjusted up to 10 cm above the conveyor belt. High quality Hewlett Packard HP pigment ink provides resistance to the fading, scratches. and water after the image dries. Technical Characteristics of the Printer head: Print area width - up to 59.4cm (23.4 in) Print area length - from 2.54 cm (1 inch) to 91.44 cm (36 inch) Workpiece movement speed - up to 45.72 cm (18 in) per second Printing speed - up to 50 arc\ min A4, up to 16 arc\ min A3 Print resolution - 1200x1200dpi Colors - CMYK (Cyan, Magenta, Yellow, Black) Ink type - water-based pigment ink Information connection - Ethernet 10/100/1000 Base-T network port Operating system - Windows (recommended Windows10) Hewlett Packard HP driver TICAB software: The current status of the printer is being monitored. Number of prints is calculated - the total and the current task. The calculation of the value of ink consumption. Monitoring the current level of ink in the cartridges. Starting the printer nozzle maintenance and cleaning functions. Starting the procedures for replacing the cleaning mechanism. Calibrate the printer nozzles for linearity and color uniformity. Start the procedure for high-speed printing of a large number of copies.

Condition: like new (used), Year of construction: 2013, functionality: fully functional, turning length: 1,600 mm, turning diameter over cross slide: 700 mm, turning diameter: 920 mm, spindle motor power: 2,600 W, spindle speed (max.): 2,500 rpm, spindle bore: 115 mm, travel distance X-axis: 370 mm, travel distance Y-axis: 150 mm, travel distance Z-axis: 1,600 mm, bar passage: 91 mm, total height: 2,765 mm, total length: 5,252 mm, total width: 2,778 mm, CNC Lathe JOHNFORD ST-70 AH 6 CF + Y TECHNICAL SPECIFICATIONS Crsdpfx Asyz R D Njb Uof Brand: Johnford Model: ST-70 AH+CF+Y Year: 2013 CNC: Fanuc 21i-TD Swing over bed: 920 mm Swing over carriage: 700 mm X-axis travel: 370 mm Z-axis travel: 1600 mm Y-axis travel: +/-075 mm Driven tool + Y axis TBYA 250 turret (12 positions) - 3276 rpm / 37 kW Hydraulic 3-jaw chuck Ø 304 Programmable hydraulic tailstock with rotary quill Chip conveyor Bar capacity: 91 mm Spindle A2-8 / 2500 rpm / 22-26 kW PRICE AND FURTHER INFORMATION UPON REQUEST (CNC, SIEMENS, HASS, LAGUN, FAGOR, CINCINATI, HEIDENHAIN, MACHINING, PINACHO, MORISEIKI, MILLING MACHINE, LATHE, GRINDER, BORING MACHINE, PRESS, LASER, SHEAR, PRESS BRAKE)

Condition: good (used), Year of construction: 2016, Contact us for more information Cjdpfx Absy Enr Se Ujrf