CNC Lathe

OKUMA LCC 15

Condition: used, Year of construction: 1996, Switch-on time: 68743 h Ksdpfjvfucfsx Af Sefa Spindle hours: 17338 h

Condition: reconditioned (used), Modernized machine with new LTG-StoreControl P control system Control system expansion available optionally External dimensions: Height 8,700 mm Width 3,500 mm Kfsdpfxod Spf Ro Af Ssa Depth 1,580 mm 51 supports with a payload of 350 kg each In the clear usable dimensions: H = 255 mm W = 3,050 mm D = 520 mm Chain pitch 305 mm 51 galvanized intermediate shelves Total payload up to 19,000 kg Storage table at 990 mm above floor level with stainless steel worktop, 315 mm deep Color: gray Drive motor power: 1 x 3.8 kW / 400 volts Subject to errors and technical changes, Surfaces cleaned, signs of wear and minor deformations possible Delivery & installation currently mainly in Germany, Austria and other neighboring countries

Condition: as good as new (ex-display), Year of construction: 2019, functionality: fully functional, turning diameter over cross slide: 415 mm, turning length: 850 mm, turning diameter: 390 mm, spindle bore: 105 mm, spindle speed (max.): 2,000 rpm, travel distance X-axis: 225 mm, travel distance Z-axis: 950 mm, rapid traverse X-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, total height: 1,980 mm, total length: 4,600 mm, total width: 1,900 mm, quill diameter: 100 mm, quill stroke: 120 mm, overall weight: 7,000 kg, bar passage: 90 mm, chuck outer diameter: 300 mm, controller manufacturer: Siemens, controller model: 828D + Shopturn, Equipment: documentation/manual, max. turning diameter 390 mm Z-axis travel: 950 mm max. spindle speed: 2000 rpm AC spindle motor SIEMENS (cont./15min) 25/33 kW bar capacity: 90 mm spindle nose: A2-11 Kjdpfjfk Et Ajx Af Sjfa Including accessories a. o: SAUTER 12-station turret VDI-40 Trifix holder for driven tools C-axis with spindle clamping and stabilization Wide and stable flat guides 45° inclined bed for optimum chip fall Hinged belt chip conveyor with chip bucket 3-jaw Kitagawa power chuck ø 300 mm Tool measurement can be swiveled in manually Hydraulic tailstock manually adjustable with programmable tailstock quill Coolant unit with powerful pump (4 bar) Rittal filter fan on the control cabinet

Condition: new, filling capacity 300 kg max. workpiece height 500 x 200 x 20 mm workpiece weight total 200 kg max. workpiece weight 15 kg / Stck. revolutions per minute 22 U/min filling amount 40-50 % Colour blau 5015 RAL 0 625 x 270 mm total power requirement 1,5 kW weight of the machine ca. 650 kg range L-W-H 1 x 1,7 x 1,29 mm New deburring machine for safe and to efficiently deburr workpieces. 6 - angular drum lined with wear-resistant vulcanized rubber 36 mm, roller shutter to protect against the rotating container, stable design, simple service. Control panel with timer, hour counter, main and emergency stop switch and signal lamp. The maximum filling quantity is 40% of the containervolume and corresponds to 300 kg consisting of 175 kg workpieces + 125 kg deburring medium = Hard manganese balls pic 6 or cast iron pentagons pic 7 (50 kg is included in the price). This are available from Sideros. Sideros ECO dust extraction available at extra Kfjdpfxsu Uu T Rs Af Soa cost. The manufacturer recommends taking 100 kg samples of the material to be deburred to be sent to the factory in Italy for test purposes before ordering. Machine dealer with own stock of 1600 m².

Condition: good (used), Year of construction: 2013, CNC Lathe with y-axis Kfjdpfsxpg Ecsx Af Sja Okuma - LT2000EX Length:4200mm Width:2200mm Height:2700mm Weight:10000kg

Condition: good (used), Year of construction: 2003, Good condition,live tools, measuring arm. Kfodpowybg Sjfx Af Sea Parts shown by hand not come. Technical details shown on pictures.

Year of construction: 2001, condition: good (used), CNC lathe Kedpfx Afjk Hz Iws Ssfa Manufacturer: OKUMA Type: LB-250T Model: OSP-U10L YEAR OF MANUFACTURE: 2001 2-axis CNC lathe with robotized loading Description: two-axis X-Z lathe for short workpieces and with a robotized workpiece magazine X-AXIS: 180 mm Z-AXIS: 325 mm Spindl: 4500 1/min Coolant system and chip conveyor

Condition: good (used), Year of construction: 2014, Technical data shown on photos. Parts shown by hand not come. Kodjufp Svjpfx Af Ssfa

Condition: used, Year of construction: 2019, functionality: fully functional, turning length: 550 mm, turning diameter: 410 mm, spindle bore: 74 mm, spindle speed (max.): 3,200 rpm, travel distance X-axis: 230 mm, travel distance Z-axis: 650 mm, spindle motor power: 11,000 W, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 30 m/min, total length: 2,095 mm, total width: 1,543 mm, quill travel distance: 120 mm, quill diameter: 100 mm, overall weight: 3,200 kg, chuck outer diameter: 210 mm, spindle nose: A2-8, Equipment: documentation/manual, rotational speed infinitely variable, Takisawa TCN-2600L6 – CNC Lathe with Driven Turret (without Internal Components) – Year of Manufacture 2019 A used, very well-maintained CNC lathe from the manufacturer Takisawa, model TCN-2600L6, year 2019, is being offered for sale. The machine is immediately available and can be inspected by appointment. ✅ Technical Data: Manufacturer: Takisawa Kedpfx Afjwxrmgs Sefa Model: TCN-2600L6 Year of Manufacture: 2019 Max. Turning Diameter: 410 mm Max. Turning Length: 550 mm Bar Capacity: 74 mm Spindle Nose: A2-8 Spindle Speed: up to 3,200 rpm Main Spindle Drive Power: 11/9 kW Tool Turret: 12-station, prepared for driven tools (without internal components) Tool Holder: Optionally with Capto C5 basic holders Chuck: Schunk ROTA NCO 210 (3-jaw hydraulic) Tool Measurement: Renishaw Tool Setter (plug-in) Tailstock: Hydraulic, MT5 Control: FANUC 0i-TF with Manual Guide-i Extraction unit is not included! Inspection possible by appointment Price ex location!

Year of construction: 1987, condition: ready for operation (used), Workpiece diameter: 10-350mm, max. grinding length: 660mm, clamping length: 1055mm, max. module: 25mm, swivel angle: +/-60°, grinding wheel dimensions: 300-500x100mm, with Faudi cooling lubricant belt filter and Elbaron oil mist separator. No longer fit for operation and can only be used as a basis for a complete overhaul. Ksdpforgah Hex Af Sofa