CNC Lathe

NILES-SIMMONS N10/630

Condition: used, Year of construction: 2008, max. wheel diameter 300 mm max. module 8 min. module 0,7 Control SINUMERIK 840 D min/max. pitch cone angle - 90 / + 90 ° workpiece spindle - bore 127 mm grinding wheel diameter 50 - 230 mm spindle speeds (infinitely variable) 7.500 U/min total power requirement 146 kW work piece spindle speed 700 U/min weight of the machine ca. 21 t dimensions of the machine ca. 9,5 x 3,6 x 3,1 m Measuring probefor tooth gap(integrated on the grinding head) External grinding spindle cooling system ELBARON oil mist extraction (integrated in the machine) Hoffmann coolant filter system Was used for the serial production of spiral-toothed ring gears Ncjdpfx Aovxww Ssaxsl No clamping devices No grinding wheels / grinding wheel flanges No dressing wheels

Condition: excellent (used), Year of construction: 1999, operating hours: 6,000 h, functionality: fully functional, travel distance X-axis: 505 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 610 mm, feed rate X-axis: 20,000 m/min, feed rate Y-axis: 20,000 m/min, feed rate Z-axis: 20,000 m/min, controller manufacturer: Heidenhain, controller model: TNC 426, workpiece weight (max.): 300 kg, table width: 380 mm, table height: 1,004 mm, table length: 920 mm, overall weight: 250 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 18,000 rpm, spindle motor power: 10 W, Equipment: documentation/manual, rotational speed infinitely variable, The machine is equipped as follows: -Tool holder: SK 30 -Tool changer with 24 places (automatic tool change) -Coolant system -Spindle cooling Ncsdpev A Tyqjfx Aaxjl -Mist extraction -Chip drawer -RENiSHAW measuring probe

Condition: excellent (used), Year of construction: 2001, operating hours: 4,500 h, functionality: unexamined, machine/vehicle number: 090119, Manufacturing origin CE - Germany Voltage 400V Netweight 7500 kg Custom position 8458.91 20 Dimensions 2,9 x 2,3 x 2,3 m. 29731 hrs - work 4500h rs TECHNICAL DATA AXES Maximum travel X-axis 400 mm Maximum travel Y-axis 300 mm Maximum travel Z1-axis 475 mm Maximum travel Z2-axis 475 mm Relative positions B-axis 0,0001 – 360° Relative Position C1/C2-axis 0,0001 – 360° WORKPIECE Maximum cubic dimensions 80x80x80 mm Maximum weight 5 kg TURRET Number of stations 24 Number of controlled stations 18 Number of steady stations 6 Maximum tool attachment (round) Ø 20 mm Maximum tool attachment (square) 16x16 mm (20x20) Maximum trajectory of turret above tool’s point 500 mm Rotation speed of live tools 1-9000 min-1 SPINDLE Maximum rotation speed 6000 min-1 Maximum bars diameter Ø 42 mm Maximum forced chuck clamping 140 mm BARS MACHINING Maximum bar length for bar’s feed 1000 mm Ncodjht Hg Depfx Aaxel Maximum piece size for the bar taker Ø42 x Long.100 mm Maximum diameter of taker’s collets 42 mm Pulling and pressure force of clamping cylinder 20000N FEEDS X-axis advance force abt.895 daN Y-axis advance force abt.895 daN Z1-axis advance force abt.895 daN Z2-axis advance force abt.895 daN Fast moves axes X/Y/Z 20 m/min Motor’s torque of tool control 2,4 Nm Spindle S1 / Spindle S2 70Nm COOLING (values only as indication) Capacity of pump submerged inside chips conveyor 10 l/min for abt. 4,5 bar 80 l/min 3,2 bar 150 l/min 0,7 bar Capacity of overpressure pump inside conveyor 10 l/min 13,2 bar 50 l/min 9 bar 90 l/min 1 bar Lubricating coolant volume inside conveyor abt.134 L. Coolant volume inside cooling aggregate 45 L. NUMERIC CONTROL Siemens 840D MACHINING PRECISION Resolution axes X/Y/Z 0,1 µm Resolution axe B 0,0001° Resolution axe C 0,0001° Positioning precision 5 µm Repeatability 0,6 µm Maximum error on workpiece’s concentricity 0,5 µm ELECTRIC Spindle 1 / Spindle 2 (at 100%) 11 kW Spindle 1 / Spindle 2 (at 40 %) 15 kW Advance motors axes X/Y/Z1/Z2 1,3 kW Axis B 1,3 kW Tool control 2,3 kW Hydraulic pump 7,5 kW Hydraulic back movement 0,75 kW Cooling aggregate fan 1 / 2 0,18 kW Circulation pump of cooling aggregate 1,1 kW Compressor of cooling aggregate 2,2 kW Chips ejector 0,25 kW Emulsion pump 1 1,1 kW Emulsion pump 2 2,2 kW Operation tension 400 V Network frequency 50Hz (60option) Control tension 24V DC Absorbed power 35 kW Nominal current 63A Connecting réseau TM / TT / IT PNEUMATIC Maximum operation pressure 10 bar Normal operation pressure 6 bar Minimal operation pressure 5 bar Air output env. 150 L/min Valves tension 24V DC Oil-mist lubrication tank capacity 12 L Quality level 2 selon Pneurop6611 NOISE LEVEL Normal use 78—80 dB errors and omissions excepted-data given without obligation Inventory no.2321018, machine equipped with : Chip conveyor Preparation for bar feeder Tool holders : 6 fixed drills ER32 8 turning tool holders 5 live tool holders ER32 4 live tool holders ER25 6 live tool holders ER20

Condition: used, Year of construction: 2007, turning diameter 470 mm turning length 2500 mm control Siemens Sinumerik 840 D work height max. 1300 mm swing diameter over bed slide 750 mm swing over bed 780 mm diameter of quill 160 mm taper bore MK 5 tool numbers 48 weight of tools max. 15 kg tool length - max. 500 mm total power requirement 123 kVA weight of the machine ca. 27 t dimensions of the machine ca. 8,4 x 4,0 x 3,3 m C-axis: - Speed range - 30 rpm - Max. torque at rotary spindle (60% duty cycle) 930 Nm - Positioning accuracy 0.005 degrees Slide travel: - X-axis 720 mm - Z-axis 4072 mm Rapid traverse: - X-axis 18 m/min - Z-axis 30 m/min Feed rates: - X-axis mm/min - Z-axis - mm/min Workpiece spindle: - Spindle head according to DIN 55026: A 11 - Through bore: 123 mm - Diameter in front bearing: 200 mm - Oriented spindle stop: 0–359 degrees Workpiece spindle drive with 2-stage gearbox: - Drive power at 100/60% duty cycle: 37/45 kW - Total speed range: 10–2,500 rpm - Number of speed ranges: 2 - Speed range I: 10–775 rpm - Speed range II: 20–2,500 rpm - Max. torque at 60% duty cycle: 2,083 Nm (up to 186 rpm) Equipment/accessories: - Forkardt power chuck with one set of hard and soft jaws each - Hydraulic steady rest - Tailstock with center point - Chip conveyor - Coolant device - 5 HSK 100 A holders - Technical documentation Ncjdpjw Rf Tisfx Aaxsl

Condition: excellent (used), Year of construction: 2020, Swing over bed 880mm, Swing over saddle 817 mm, Maximum turning diameter 550mm, Ncodpfx Aaox I N Rbsxel maximum turning length 3070mm, bar capacity 116.5mm, Y axis +/- 75mm, Spindle speed 2000rpm, milling speed 4,000rpm, spindle power 37/30KW, 12 station turret, Fanuc IPlus control. 3 jaw chuck, tool setter, Hydraulic steady, swarf conveyor,

Condition: refurbished (used), Year of construction: 2003, operating hours: 47,000 h, functionality: fully functional, Manufacturer: Deckel Maho / DMG MORI Model: DMU 70 eVolution (extensively overhauled; new guideways, new motor spindle, new hoses, etc.) Year of manufacture: 2003 Serial number: 15035707964 Operating hours (as of 08/2025): Power-on hours: 100,115 h Cycle hours: 48,302 h Availability: from January 2026 Equipment and Accessories - CNC control: Heidenhain MillPlus V530 / 00m - Renishaw MP10 infrared probe Ncsdox H S D Uopfx Aaxsl - Motor spindle SK40, 18,000 rpm, operating mode 4 - Quick Set software for kinematic compensation - Blum laser system for tool measurement and tool breakage control - Tool magazine with 92 positions - Tebaron extraction/filter unit - ICS (internal coolant supply) through the spindle, 80 bar - Chip conveyor - Photos and videos available via MONTRASIO WhatsApp Business Maintenance, Servicing, and Upgrades (all carried out in 2025) - Annual maintenance by Maschinen- und Industrieservice ULRICH - Ongoing overhaul of individual components as part of normal wear - Y-card replaced - Y power module exchanged (new) - Mixer in the coolant system replaced with a brand-new mixer - 4-DO card A5-09A71 replaced - Complete overhaul of the motor spindle - GKT Z-axis completely overhauled - Guideways of all axes overhauled, including Y and Z-axis (brand-new guideways) - Coolant pump replaced by new pump - Connector on the high-pressure pump renewed (new) - Buffer battery replaced (new battery) - Lubrication hoses renewed (new hoses) - General maintenance performed by DMG MORI Direct Service in 2024 and 2025 (last service in 2025) - Monitor replaced (new) - Oil skimmer replaced Known Issues: Only age-related, visual or optical signs of use Application / History The machine will remain powered up and in production until calendar week 02/2026 Delivery calendar week 04/2026 Previously used at LIEBHERR Aerospace Toolmaking machine – meticulously maintained high-precision machine with documented maintenance history, complete logbook, structured spare parts management, and regular spindle inspections (every six months) Reason for sale: Acquisition of a brand-new GROB 550 5-axis machining center

Condition: reconditioned (used), Year of construction: 2008, operating hours: 13,600 h, functionality: fully functional, machine/vehicle number: 106, Machine partially overhauled by Willemin with new geometry and a new secondary spindle (6,000 rpm). New ball screws on X-Y-Z axes. Alignment and calibration. Nodpfsw T Tlrox Aaxecl Ready for production. 5 axes – Fanuc 31i A5 – HSK40E – max 30,000 rpm – Year 2008. Country of manufacture: Switzerland Voltage: 3x400V / 60Hz; 50 A; 35 kVA Dimensions: 270x200x260 cm Net machine weight: 2,500 kg TECHNICAL SPECIFICATIONS WILLEMIN MACODEL 508 MT Control: Fanuc 31i A5 X axis: 450 mm Y axis: 200 mm Z axis: 425 mm B axis: -45° to +100° U axis: 300 mm Tool magazine: 48 PickUp stations Main spindle A: max Ø42 mm, max 6,000 rpm Main spindle C: max Ø42 mm, max 3,000 rpm Milling motor spindle: HSK40E, max 30,000 rpm All technical details are given without obligation and subject to errors or omissions.

Condition: good (used), Year of construction: 2013, 4000mm between centres, swing 950mm, swing over cross slide 630mm, 254mm spindle bore, FANUC 32i-Model B, Nsdpfoxp Hhdox Aaxscl 30Hp, 630rpm spindle speed, automatic 8 station turret, swarf conveyor, tailstock, 4 jaw chuck & rear mounted 4 jaw chuck, interlocked guards, coolant, fixed steady.

Year of construction: 1995, condition: used, SPINNER SB-CNC year 1995, workpiece length max. 200 mm, workpiece output max. 3 parts/min, with control Siemens, type SINUMERIC, portal loading system, SPINNER PL-400 Ncsdpfx Aaogykaqexol

Condition: used, Year of construction: 1996, turning diameter over bed 710 mm turning dia. over face-slide 420 mm turning length 2000 mm control Manual Plus 3110 Heidenhain spindle bore 92 mm main spindle speeds: 16 - 1800 U/min cross movement 385 mm spindle head DIN 55027 - Size 11 spindle diameter in front bearing 140 mm power capacity at 100 % load 22,00 kW 2750 Nm Ncedpfx Aasxxmiyexel feed x/z-axis 1 - 5000 mm/min rapid traverse X-axis 6,00 m/min rapid traverse Z-axis 8,00 m/min tailstock quill taper MT 5 quill stroke 210 mm diameter of quill 110 mm total power requirement 40,00 kW weight of the machine ca. 5,60 t dimensions of the machine ca. 5,00 x 3,00 x H2,50 m