Used Daewoo Mega 250-V for sale (68)

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: PM301222, turning length: 700 mm, turning diameter: 400 mm, spindle bore: 90 mm, spindle speed (max.): 3,500 rpm, spindle speed (min.): 35 rpm, travel distance X-axis: 282 mm, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 24 m/min, total height: 2,000 mm, total length: 5,000 mm, total width: 2,200 mm, quill travel distance: 100 mm, quill diameter: 100 mm, overall weight: 5,000 kg, spindle nose: A2-8, bar diameter (max.): 77 mm, controller manufacturer: FANUC, controller model: SERIES 18i-T, Equipment: chip conveyor, documentation/manual, DAEWOO PUMA 300 B CNC Lathe - Operating voltage: 400 V - Frequency: 50/60 Hz - Rated current: 10.499 A - Connection: 40.01 kVA - Swing diameter over bed: 570 mm - Swing diameter over carriage: 370 mm - Recommended machining diameter: 255 mm Redpfeyvru Sox Abwsr - Max. machining diameter: 400 mm - Max. working length: 648 mm - Bar capacity: 77 mm - Chuck diameter: 255 mm - Front spindle bearing diameter: 130 mm The machine is equipped with a tailstock, a 10-station turret, as well as a three-jaw chuck from SMW AUTOBLOK, diameter: 260 mm, and a chip conveyor. Attention: The item must be collected on a binding date, to be arranged, between 12.05. and 22.05.2026. FCA D-74821 Mosbach – loaded onto truck.

Condition: used, functionality: fully functional, Year of construction: 2005, operating hours: 3,080 h, load capacity: 4,500 kg, lifting height: 6,050 mm, free lift: 1,800 mm, fuel type: gas, mast type: triplex, construction height: 2,780 mm, fork length: 1,200 mm, empty load weight: 7,500 kg, total length: 3,200 mm, drive type: Treibgas, construction width: 1,700 mm, LPG forklift Load center: 500 ISO Class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Technical condition: normal Front tire type: Superelastic Front tire condition: 0 - 20% Rear tire type: Superelastic Rear tire condition: 0 - 20% Rjdpfxsvcf Rnj Abwor Description: Thorough cleaning, new inspection with oil and filter change, new set of 6 black tires, overhaul according to FEM incl. approval. Side shifter, 3rd valve, front work lights, full free lift, twin tires,

Condition: ready for operation (used), Year of construction: 2003, Control Unit Brand FANUC Rjdpfsx D Scisx Abwjr Movement X-Axis Movement 250 mm Y-Axis Movement ±50 mm Z-Axis Movement 580 mm This 5-axis DAEWOO PUMA 2000 SY turn-mill centre was manufactured in 2003. It features a max turning diameter of 330 mm, length of 510 mm, and rapid feeds up to 24,000 mm/min. Includes main and sub-spindle capabilities, both with C-axis, and a 12-station turret with live tooling. Consider the opportunity to buy this DAEWOO PUMA 2000 SY turn-mill centre. Contact us for more information about this machine. Application Types Turning

Condition: like new (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 1435, turning length: 648 mm, turning diameter: 420 mm, spindle bore: 76 mm, spindle speed (min.): 45 rpm, travel distance X-axis: 242 mm, travel distance Z-axis: 680 mm, rapid traverse X-axis: 20 m/min, rotational speed (max.): 4,500 rpm, feed rate Z-axis: 24 m/min, overall weight: 4,100 kg, center height: 240 mm, Equipment: rotational speed infinitely variable, Very nice PUMA 240MSB With sub-spindle and driven tools And chip conveyor. Very low operating hours. 8000 hours power on Sub-spindle max 6000 RPM Control 18ITS with Manual Guide Rjdpfx Abjywkwhswor Bar Feeder LNS

Condition: used, Year of construction: 2000, DAEWOO PUMA 300 LM Lathe CNC lathe with C axis Live tools: 4 units – 2 radial + 2 axial CNC FANUC 18-T CAPACITY Swing diameter over bed: 590 mm Swing diameter over cross-slide: 450 mm Max turning diameter: 355 mm Max turning length: 1233 mm Bar passage: 76 mm Max drilling diameter with driven tools: 20 mm Max tapping diameter with driven tools: M16 TRAVELS X axis: 250 mm Z axis: 1330 mm SPINDLE Speed: 35 - 3500 rpm Spindle nose: ASA A2-8 Motor: 18.5/22 kW POWERED TURRET 12 stations for live tooling Live tool rotation speed: 40-4000 rpm AUTOMATIC TAILSTOCK Quill diameter: 100 mm Tailstock: MT5 Quill travel: 100 mm Total power: 50 kW Machine dimensions: 3990x1660x H 1820 mm Weight: 6700 kg Redpsyx A Rvefx Abwjr INCLUDES Chip conveyor

Condition: excellent (used), Year of construction: 1998, Control Fanuc OT with electronic handwheel Swing diameter over bed 700 mm Travel path - X 362 mm Travel path - Z 1,055 mm Speed range 1 20–2,000 rpm Rjdpfxeyxp Hwo Abwjr Chuck diameter 400 mm Tool turret 10 positions Chip conveyor yes Rapid traverse X-axis 16,000 mm/min Rapid traverse Z-axis 20,000 mm/min Total power requirement 50 kW Machine weight approx. 9 t Space requirement approx. 5.1 x 2.4 x 2.3 m Control system CNC Control name FANUC

Condition: ready for operation (used), Year of construction: 2004, spindle speed (max.): 6,000 rpm, spindle motor power: 11,100 W, overall weight: 3,500 kg, controller manufacturer: FANUC, controller model: 0i-T, number of axes: 2, This DAEWOO Puma 160 was manufactured in 2004. A robust horizontal turning machine featuring a Fanuc 0i-T control system, it supports a turning diameter up to 160 mm and a length up to 250 mm. With a spindle speed of up to 6000 rpm and a main motor power of 11.1 kW, it's ideal for precise operations. Machine weight ranges from 3,000 to 3,500 kg. Contact us for more information about this machine. Additional equipment • Included in the offer: A set of tools. Machine Benefits Technical Machine Benefits • Turning diameter: up to 160 mm • Turning length: up to 250 mm Rsdeyar Eqopfx Abwjr Extra Information Machine still under power

Condition: used, Year of construction: 2004, Type: CNC Lathe Make: Daewoo Model: Lynx 210 Year of Manufacture: 2004 Redoyn Hkwopfx Abwer Condition: Used Quantity: 1

Condition: used, Year of construction: 2006, DOOSAN DAEWOO PUMA 240 Lathe YEAR OF FIRST INSTALLATION: 2007 CNC FANUC Series 21i – TB IMPECCABLE MACHINE LIKE NEW, CONNECTED ANY TEST POSSIBLE CHUCK DIAMETER: 220 mm MAX. SWING OVER BED: 550 mm MAX. SWING OVER CARRIAGE: 390 mm MAX. TURNING DIAMETER OVER BED: 350 mm MAX. TURNING LENGTH FROM CHUCK: 562 mm BAR CAPACITY: 65 mm Rjdpfx Ajyuqacobwsr SPINDLE SPEED: 45 – 4,500 RPM SPINDLE MOTOR POWER: 15 / 18.5 kW TRAVELS: X: 242 mm Z: 580 mm TOOL TURRET: 12 POSITIONS CHIP CONVEYOR TOOL PRESETTER COMPLETE WITH ALL DOCUMENTATION

Condition: used, Year of construction: 2001, travel distance X-axis: 2,000 mm, travel distance Y-axis: 820 mm, travel distance Z-axis: 850 mm, DAEWOO ACE V - 850 MACHINING CENTER CNC FANUC 18 - M TABLE SIZE: 2,000 mm x 800 mm TRAVEL: X: 2,000 mm Y: 820 mm Z: 850 mm Rodpfx Aoyup T Uobwjr DISTANCE SPINDLE NOSE - TABLE SURFACE: 200 - 1,030 mm SPINDLE SPEED: 6,000 RPM MAXIMUM PERMISSIBLE TABLE LOAD: 3,000 kg TOOL MAGAZINE CAPACITY: 40 positions TAPER: ISO 50 DIN 69871 CHIP CONVEYOR MACHINE COMPLETE WITH ALL DOCUMENTATION YEAR OF FIRST INSTALLATION: 2001 MACHINE IS IN EXCELLENT CONDITION

Condition: used, Loading utility 500 Liter weight 0,3 t dimensions 1750 x 730 x 1080 m Rodpfx Asyrhvcebwer Electric tipper - Operating time with a fully charged battery: 8-10 hours - Battery charging time: 6-7 hours - Hydraulic tipping

Condition: like new (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 850 mm, nominal power (apparent): 61 kVA, torque: 1,675 Nm, controller manufacturer: FANUC, controller model: 18iMB, workpiece weight (max.): 1,200 kg, table width: 630 mm, table length: 630 mm, spindle speed (max.): 6,000 rpm, distance table to spindle center: 875 mm, distance table center to spindle nose: 1,000 mm, spindle nose: ISO #50 7/24 Taper, number of spindles: 1, number of slots in tool magazine: 40, ACE-HM630 – Specifications Travel X-axis (table longitudinal travel): 1,000 mm Y-axis (head vertical travel): 800 mm Z-axis (column cross travel): 850 mm Distance from spindle center to pallet top: 75–875 mm Distance from spindle nose to table center: 150–1,000 mm Table Pallet type: 24-M16 × P2.0 Tap Indexing degree: 0.001° Table loading capacity: 1,200 kg Pallet size: 630 × 630 mm Spindle Max spindle speed: 6,000 rpm Spindle taper: ISO #50 7/24 Taper Max spindle torque: 1,675.8 N·m Redpfex Ad Nlox Abwor Feedrate Rapid traverse (X/Y/Z): 24 m/min Cutting feedrate: 1–12,000 mm/min Automatic Tool Changer Tool shank: MAS 403 BT50 (DIN, CAT) Tool storage capacity: 40 Max tool diameter: 135 mm Max tool diameter (without adjacent tools): 250 mm Max tool length: 400 mm Max tool weight: 25 kg Max tool moment: 34.3 N·m Tool selection method: Fixed address Tool changing time (tool-to-tool): 2.5 sec Tool changing time (chip-to-chip): 8.5 sec Automatic Pallet Changer Number of pallets: 2 Type: Rotary Pallet change time: 25 sec Pallet rotation in loading station: 90° index Power Source Electrical power supply (rated capacity): 60.7 kVA Compressed air supply: 0.54 MPa Tank Capacity Coolant tank: 550 L Lubrication tank: 4.3 L Machine Size Machine height: 3,041 mm Machine dimensions (L × W): 6,485 × 3,857 mm Machine weight: 18,000 kg

Condition: used, Year of construction: 2001, Vertical machining center Daewoo MYNX 500 Control type: Heidenhain 426 Table dimensions: 1200 mm x 500 mm Rodpfx Asypakmobwer Travel: X-axis: 1020 mm Y-axis: 510 mm Z-axis: 625 mm Tool magazine: 30 positions Spindle speed: 80-8000 rpm Through-tool coolant / high pressure Tool taper: ISO 40 mm Motor power: 12/16 kW Rapid traverse: 24 m/min Handwheel control Brand new automatic chip conveyor by LNS Year of installation: 2001 CE Weight: 7,500 kg Complete with all documentation

Condition: used, Technical details: rated capacity: 8,1 kVA Number of working hours: 0 h output: max. 400 V = 8,1 kVA type of fuel: Diesel voltage: 400 V / 23 V V output: max. 8,1 kVA weight of the machine ca.: 0,165 t dimensions L x W x H: ca. 0,85 x 0,53 x 0,77 (o.Karton) m Rodpfx Aeu Nvcxebwjr transport dimensions LxWxH: 0,9 x 0,55 x 0,80 m Floor standing machine with 4x wheels, 2x steerable and braked power: at max. voltage = 400V - 8,1kVA and 230V - 7,3 kVA at nominal voltage = 440V - 7,5 kVA and 230V - 6,7 kVA current 400V - 16A and 230V - 32A Voltage 400V / 230V Diesel engine: 498 cc displacement Tank capacity 15 liters Battery 12V voltage with power 36 Ah Equipment: 3x connection socket ( 1x 400V / 16A and 1x 230V / 32A both three-pole and 1x Schuko socket 230V / 16A) Accessories see photo Offers only to the professional user. *

Year of construction: 2002, condition: ready for operation (used), For sale is a compact CNC lathe DAEWOO PUMA 160: travels Y/X: approx. 400mm/200mm, rapid traverse: approx. 20-24m/min, turning diameter max.: 200mm, turning length max.: approx. 200mm, swing diameter over bed: approx. 350mm, chuck diameter: 160mm, speed range: 40-5000rpm, spindle nose: A2-5, spindle bore: approx. 50mm, bar capacity approx. 42-45mm, CNC control: FANUC 21-i, space requirement X/Y/Z: approx. 1850mm/1450mm/1650mm, machine weight: approx. 2500kg. Inspection possible by arrangement. Rodpfeylbt Ujx Abwor

Condition: excellent (used), Year of construction: 2006, X-Y-Z Axes travel:520x320x350mm Fanuc control system BT30 10000 rpm spindle Rodpfx Asnyh Sqsbwor APC Automatic Pallet Changer System Pallet size: 650x440 mm IN OUR STOCKS WE HAVE: *Horizontal Machining centers *CNC lathes 2 axis *CNC lathes 2 axis + C axis *CNC lathes 2 acis + C axis + Y axis *CNC tapping centers *CNC vertical machining centers %100 owned +50 CNC machine tools in stock! You are welcome to contact us for your further questions CNC World Machine LTD

Condition: used, Year of construction: 2000, operating hours: 16,672 h, functionality: fully functional, machine/vehicle number: 2S080254, turning diameter over cross slide: 250 mm, turning length: 400 mm, turning diameter: 250 mm, spindle bore: 50 mm, spindle speed (max.): 3,000 rpm, travel distance X-axis: 250 mm, Equipment: documentation/manual, Very fast lathe, used only for finishing. Highly precise machine. Rsdoyi Abhspfx Abwjr

Condition: good (used), Year of construction: 2014, functionality: fully functional, SYNCROMILL C21-63 OPERATING RANGES Table 1600 mm X 800 mm Travel (X/Y/Z): 700 / 1,000 / 800 mm FEED AXES Speed (X/Y/Z): 75 / 75 / 105 m/min Acceleration (X/Y/Z): 11 / 11 / 17 m/s² MACHINING SPINDLES No. of spindles: 2 Spindle spacing: 700 mm Power S1/100%: 26 kW Torque S1/100%: 60 Nm Power S6/40%: 35 kW Torque S6/40%: 80 Nm Max. speed: 17,500 Rpm TOOL INTERFACE HSK 63 TOOL MAGAZINE Chip-to-chip time (VDI 2852): 2.9 s Tool positions: 56 Tools atc Tool length: 530 mm Weight: 9 kg Diameter with fully occupied magazine: 85 mm Diameter with empty positions: 175 mm CONTROLLER / INSTALLATION Siemens 840D SL A-axis: ±180° B-axis: 360° Cooling Blum Touch Probe Rotary table 350 MM Xtra Spindle for heavy works Input power: 95 kVA Installation dimensions (L/W/H): 4.6 / 3.4 / 3.2 m Weight: 25,000 kg Additional Equipment Included: 1 x Rotary Table for advanced multi-axis machining 1 x Touch Probe for precise measurement and quality control 1 x Extra Spindle (ready-to-install for maximum uptime) Ready For Delivery. Rodsvxpuiepfx Abwor Increased productivity with two spindles operating simultaneously High flexibility for complex parts and multi-side machining Equipped with additional accessories to maximize machine versatility and reduce downtime

Condition: new, Year of construction: 2024, functionality: fully functional, input voltage: 24 V, operation weight: 160 kg, LARGE QUANTITY AVAILABLE! Power: Battery: 24V / 100Ah Avarage power consumption: 1000W Power suction turbine: 500W Power brush drive: 500 W Max running time: 5 hours Cleaning brushes: Brush speed: 175 rpm Brush diameter: 510mm Vacuuming: Vacuum power, air volume (max): 24 L/s Vacuuming power, negative pressure (max): 120 kPA (mbar) Dimensions and weights: Theoretical surface cleaning Performance: 2000 m²/h Suction width: 850 mm Cleaning width: 510 mm Max. working range incline: 2% Fresh/waste water tank volume: 50/50 L Max. water temperature 60°C Ambient temperature 5-40°C Net weight 160 kg Dimensions of battery compartment: 350 x 350 mm Values determined as per EN60335-2-72: Total oscillation value: < 2.5 m/s² Rjdpfx Absv Rvy Aowor Uncertainty K: 0.2 m/s² Sound pressure level Lpa: 66 dB(A) Uncertainty Kpa: 2 dB(A) Sound power level Lwa +: 81 dB(A)

Condition: new, Year of construction: 2022, Multiple available! Brand Daewoo Model: DDAE10500DSE-3G Year of manufacture: 2022, New Capacity (KvA) 8,1 kVa (230v) / 7,5 kVa (400v) Motor brand Daewoo Engine model 500 Capacity engine (Kw) 15 Hp Redpfx Ajiv Hf Njbwor Fuel Diesel Voltage 230-400 Frequency (Hz) 50 Dimensions LxWxH (mm) 880 x 560 x 720 Weight (Kg) ca 165 Number of pieces in stock 100+ Comments Max power: 8.1 kVA (400 V) 7.3 kVA (230 V) Rated power: 7.5 kVA (400 V) 6.7 kVA (230 V) Engine Power: 15hp Displacement: 498 cc Fuel tank capacity: 15 L Oil tank capacity: 1.65 L Run time 50% load: 12 hrs Power factor: 1.25 Socket: 1 x 16 A - 1 x 32 A Output 12V: ✓ Battery: 36 AH Noise level at 7M: 72 - 74 dBA Net weight: 165 kg Dimensions: 880 x 560 x 720

Year of construction: 2001, condition: used, machine/vehicle number: AV5E0888, Vertical machining center with 3 axes DAEWOO MYNX 500 HEIDENHAIN 410 Accessories: Chip conveyor belt Remote electronic handwheel Automatic high-pressure cooling system pressure through the spindle line Redogay Iuspfx Abwjr

Condition: excellent (used), Year of construction: 2004, DAEWOO Mynx 540 cnc vertical machining center Year: 2004 Specifications: Axis X travel 1020 mm Axis Y travel 510 mm Axis Z travel 625 mm Rotary table ( Tsudakoma RZ-200 ) Type of CNC FANUC 21i-MB Table length 1200 mm Table width 500 mm Max. part weight 800 kg Number of tool positions 24 Spindle taper BT 40 Max. spindle speed 8000 rpm Spindle motor power 15 kW Weight 7500 kg Machine has new spindle, fitted in October 2025. Accessories/options: - 4.axis Rotary table ( Tsudakoma RZ-200 ) - Through spindle coolant - Documentations - Remote control Redpfx Abjxt E Drowsr - Coolant tank - Spindle cooler Under power in our warehouse!

Condition: used, Year of construction: 1996, Technical details: pressure: 300 t chamfer lenght: 6000 mm control: Delem DA 24e distance between columns: 2x5100 mm throat: 645 mm dayligth: 520 mm plate thickness: 5 mm total power requirement: ca. 10,0 je machine kW weight of the machine ca.: ges. ca. 66 t dimensions of machine: L:12,0xB:2,3xH:3,65 m Redpsu Ib Drsfx Abwjr Hydr. Pressbrake 6000-300 - jib arm length= 720mm - incl. back gauge (without crowning system) adjustment travel horizontal/vertical: 680/200mm motoric Optionally, two of these press brakes can be offered - also applicable as a Tandem Pressbrake with 2x 6 meter with 300t, with table size: W:165xL.12000mm, - program sequence via both presse(synchronized) and single available Optional are tools available! Copy of documentation available i.D. *

Condition: new, connected load frequency 230 V battery 24V / 100Ah Brush diameter 510 mm turning speeds 175 U/min 0 Luft 24 L / s tank capacity 50 / 50 Liter weight 160 kg range L-W-H 1,1 x 0,52 x 1,0 mm Daewoo floor cleaning machine: Packed with battery and charger Theoretical surface cleaning: Redpfjidabkjx Abwjr Output: 2000 m²/h Suction width: 850 mm Cleaning width: 510 mm Max. working area incline: 2% Fresh/waste water tank volume: 50/ 50 L

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, turning diameter over cross slide: 350 mm, turning diameter: 550 mm, spindle bore: 66 mm, spindle motor power: 15 W, chuck outer diameter: 201 mm, bar diameter (max.): 66 mm, collet bore: 66 mm, controller manufacturer: Fanuc, controller model: Fanuc 21i-T, Equipment: documentation/manual, TURRET POSITIONS: 12 PARTS CATCHER TAILSTOCK Rodpfx Ajygidkobwjr CHIP CONVEYOR