Used Daewoo Mega 500-V for sale (57)

Condition: used, Vertical machining center Daewoo (Doosan) ACE VC500 The machine can be seen working in our warehouse in Gussago BS. Mimu Machine Tools Gussago BS Italy Vertical machining center - 2-pallet Daewoo ACE VC500 CNC Model Fanuc CNC version 18-M Spindle Taper toolholders iso 40 Power spindle 15 Kw RPM 10000 Number of tools 30 X-axis travel 760 mm Y-axis travel 510 mm Z-axis travel 570 mm Nljdpfxotzgaqj Aa Eeb Changer pallet yes Pallet dimensions 860x560 mm Maximum load allowed 300 Kg Swing type pallet yes High coolant pressure yes Cheap conveyor yes Brand Daewoo Model ACE VC500 Construction year 2000 DIMENSIONS AND WEIGHT Length 3600 mm Width 3700 mm Height 2935 mm Weight 9200 Kg The machining center is a machine tool equipped with numerical control capable of performing multiple mechanical operations with a single set-up on multiple surfaces of the same work piece. It is generally equipped with multiple axes of motion and a automatic tool exchange system and sometimes multiple pallets CNC type: FANUC 18-M Number of pallets: 2

Year of construction: 2000, condition: excellent (used), machine/vehicle number: AV5C0171, Vertical machining center with 3 axes with rotopallet DAEWOO ACE VC500 FANUC 18-M Accessories: Chip conveyor belt Nljdpfx Aajga Edxs Eeb High pressure cooling system 10 bar through the spindle line No. 2 rotary tables Comand TGV 200

Condition: used, Year of construction: 2001, Vertical machining center Daewoo MYNX 500 Control type: Heidenhain 426 Table dimensions: 1200 mm x 500 mm Travel: Nsdpfx Aoypakmea Eolb X-axis: 1020 mm Y-axis: 510 mm Z-axis: 625 mm Tool magazine: 30 positions Spindle speed: 80-8000 rpm Through-tool coolant / high pressure Tool taper: ISO 40 mm Motor power: 12/16 kW Rapid traverse: 24 m/min Handwheel control Brand new automatic chip conveyor by LNS Year of installation: 2001 CE Weight: 7,500 kg Complete with all documentation

Condition: used, Year of construction: 2001, Daewoo Puma V300 CNC Lathe Fanuc 18 – T Vertical lathe Daewoo PUMA V300 Year of installation: 2001 Kitagawa chuck, diameter 305 mm Max. swing diameter over bed: 550 mm Nedpfx Aaoyahy Ds Eslb Max. turning diameter: 410 mm Max. turning height: 420 mm Spindle speed: 2,500 rpm AC motor power (cont./30 min.): 18.5 kW Turret with 8 tools Drilling diameter: 50 mm Tool section: 25 mm Control: Fanuc Series 18-T Equipped with chip conveyor Complete with documentation

Condition: excellent (used), Year of construction: 2001, DAEWOO MYNX 500 CNC VERTICAL MACHINING CENTER Brand: Daewoo Model: MYNX 500 Type: 3-axis vertical machining center Numerical control: FANUC Series 21-M FEATURES: – CNC vertical machining center – 3 axes – Complete machine – Number of operating hours: 11,764 hours – Table: 1,000 x 500 mm A large number of tools are included with the machine. Nedpfoy S Altox Aa Ejlb

Year of construction: 2001, condition: used, machine/vehicle number: AV5E0888, Vertical machining center with 3 Nljdjgay Iuopfx Aa Ejb axes DAEWOO MYNX 500 HEIDENHAIN 410 Accessories: Chip conveyor belt Remote electronic handwheel Automatic high-pressure cooling system pressure through the spindle line

Condition: new, Power 7,5 KW Receiver 500 L feed pressure 14 bar Nedju Imfzspfx Aa Eelb liter capacity 995 l connected load frequency 400 V weight of the machine ca. 200 kg dimensions of the machine ca. 2,0 x 0,7 x ,125 m

Condition: good (used), Engine freshly overhauled (over 12tys zl). 100% operational I invite you to contact me Nedpfett T Nfsx Aa Eslb

Condition: used, Year of construction: 2001, CNC FANUC 18i M Nlodpfx Aekx E Tbsa Ejb X AXIS STROKE 2000 MM Y AXIS STROKE 850 MM Z AXIS STROKE 830 MM SPINDLE SPEED 6000 RPM SPINDLE TAPER ISO 50 DIN 69871 TABLE 2000 X 800 MM WORKPIECE LOAD 3000 KG RAPID FEED I X - Y - Z 12 MT/MIN COOLANT INTERNAL 5 BAR EXTERNAL HIGH PRESSURE 20 BAR ATC 40 PLACE 4 CNC AXIS ROTARY TABLE WITH TAILSTOCK CHIP CONVEYOR

Condition: used, Technical details: rated capacity: 8,1 kVA Number of working hours: 0 h output: max. 400 V = 8,1 kVA type of fuel: Diesel voltage: 400 V / 23 V V output: max. 8,1 kVA weight of the machine ca.: 0,165 t dimensions L x W x H: ca. 0,85 x 0,53 x 0,77 (o.Karton) m transport dimensions LxWxH: 0,9 x 0,55 x 0,80 m Floor standing machine with 4x wheels, 2x steerable and braked power: Njdpfx Aju Nvcxja Eslb at max. voltage = 400V - 8,1kVA and 230V - 7,3 kVA at nominal voltage = 440V - 7,5 kVA and 230V - 6,7 kVA current 400V - 16A and 230V - 32A Voltage 400V / 230V Diesel engine: 498 cc displacement Tank capacity 15 liters Battery 12V voltage with power 36 Ah Equipment: 3x connection socket ( 1x 400V / 16A and 1x 230V / 32A both three-pole and 1x Schuko socket 230V / 16A) Accessories see photo Offers only to the professional user. *

Condition: excellent (used), Year of construction: 2001, DAEWOO PUMA V550M-2S CNC LATHE Brand: Daewoo Model: Puma V550M-2S Type: Vertical CNC Lathe Numerical Control: FANUC Series 18-T FEATURES: – Large chuck Nlodpfxjy S Anne Aa Ejb – Power supply: 200/220V – 3-phase – 50/60Hz – Installed power: 103.8 kVA – Complete machine

Condition: used, Year of construction: 2003, machine/vehicle number: PV300200, total height: 2,718 mm, total length: 2,595 mm, total width: 1,824 mm, Lathe Daewoo Puma V300 CNC Fanuc 18 – T Vertical lathe Daewoo PUMA V300 Nledpfx Aaoy Na R Ue Esb Year of manufacture: 2003.03 Max. swing diameter over bed: 550 mm Max. turning diameter: 410 mm Max. turning length: 420 mm Spindle speed: 2,500 rpm Turret with 8 tool stations Control: Fanuc Series 18-T Weight: 5,500 kg With chip conveyor

Condition: ready for operation (used), Year of construction: 2003, operating hours: 232 h, travel distance X-axis: 390 mm, travel distance Z-axis: 780 mm, spindle motor power: 30,000 W, overall weight: 9,000 kg, number of axes: 2, Vertical turning machine manufactured in 2003. This DAEWOO PUMA V550 features an X-axis travel of approximately 390 mm and a Z-axis travel of approximately 780 mm. With a robust machine weight of 9000 kg, it is designed for durability and performance. If you are looking to get high-quality turning capabilities, consider the DAEWOO PUMA V550 machine we have for sale. Contact us for further details regarding this machine. Nlodpfx Ajyymnbea Eob • Electrical supply: AC 380/400 V, 3-phase, PE, 50/60 Hz • Rated power: 54.04 kVA • Current at full load: 78.01 A • Interrupting current: 9000 A • Electrical schematic version: PV15H688A03 Technical Specification Driven Tools No

Condition: used, New diesel generator set, power generator, emergency generator RTE Model: 50 kVA – identical to DAEWOO DAGFS 50 Brand new, unused, year of manufacture 2025 Rated output: 50 kVA Continuous output: max. 40 kVA Standby output: 55 kVA / 44 kW Rated current: 33 A Voltage: 400/230 V, 50 Hz 230 V, 50 Hz Fuel consumption: 99-liter tank for up to 8.5 hours of operation at 75% load Fuel consumption at 75% load: approx. 11 liters/hour Fuel consumption in standby mode: approx. 4 liters/hour Drive engine: 4-cylinder Ricardo ZH4105ZD inline diesel engine Engine power at 1500 rpm: 45 kW Engine power at 1800 rpm: 55 kW Displacement: 1500 cc Tank capacity: 99 liters - Simple and compact design with soundproof metal enclosure - Forklift pockets for easy and safe transportation - 3x CEE 16A sockets (3-pin, 230V) - 1x CEE 16A socket (5-pin, 400V) - Terminal connections for cable power supply for external consumers, e.g., site distribution boards Njdpfx Aajxlkq Uo Eolb - ATS module for mains backup operation, enables automatic emergency power switching in case of power failure Required space (L x W x H): 2150 x 950 x 1200 mm Weight: 900 kg New machine from stock

Condition: used, DAEWOO DOOSAN D40S TRIPLEX - DIESEL All-Terrain Forklift ∗Very good overall condition, always stored indoors∗ ∗Fitted with all fork positioners∗ ∗All-terrain capable∗ Nljdpfx Aeyutk Roa Eob ∗Minimal electronics∗ ● Enclosed cab (doors and rear made from transparent tarpaulin) ● Engine power: 58 kW / 79 HP ● Fuel: Diesel ● 2-speed automatic / torque converter transmission ● Unladen weight: 4,200 kg ● Rated capacity: 4,500 kg (at 500mm load center) ● Lifting height: 5,600 mm ● TRIPLEX mast with sideshift and fork positioner ● Fork length: 1,200 mm ● Dual front work lights ● Rear lighting ● Pre-installed for rotating beacon ● Pre-installed for towing hitch ● Front tires: 8.25 - R15 / tire tread in good condition! ● Rear tires: 250/75 R12 solid rubber tires / tread in very good condition! - UVV inspection and maintenance: NEW! Errors and prior sale excepted! = More Information = Contact Joannis Arpantzanis or Kai Bühler for further information.

Condition: used, Loading utility 500 Liter Nodpfx Aaoyrhvco Eelb weight 0,3 t dimensions 1750 x 730 x 1080 m Electric tipper - Operating time with a fully charged battery: 8-10 hours - Battery charging time: 6-7 hours - Hydraulic tipping

Condition: new, Year of construction: 2022, Multiple available! Brand Daewoo Nledpeiv Hf Nefx Aa Esb Model: DDAE10500DSE-3G Year of manufacture: 2022, New Capacity (KvA) 8,1 kVa (230v) / 7,5 kVa (400v) Motor brand Daewoo Engine model 500 Capacity engine (Kw) 15 Hp Fuel Diesel Voltage 230-400 Frequency (Hz) 50 Dimensions LxWxH (mm) 880 x 560 x 720 Weight (Kg) ca 165 Number of pieces in stock 100+ Comments Max power: 8.1 kVA (400 V) 7.3 kVA (230 V) Rated power: 7.5 kVA (400 V) 6.7 kVA (230 V) Engine Power: 15hp Displacement: 498 cc Fuel tank capacity: 15 L Oil tank capacity: 1.65 L Run time 50% load: 12 hrs Power factor: 1.25 Socket: 1 x 16 A - 1 x 32 A Output 12V: ✓ Battery: 36 AH Noise level at 7M: 72 - 74 dBA Net weight: 165 kg Dimensions: 880 x 560 x 720

Condition: used, Year of construction: 2002, DAEWO machining center Nedpfjupkilox Aa Eolb ACE-VC 320

Condition: good (used), Year of construction: 1998, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 650 mm, DAEWOO ACE-H500 For sale Daewoo ACE-H500 horizontal machining center, a heavy-duty and reliable HMC designed for high-precision and high-productivity machining. The ACE-H500 is well known for its rigid construction, powerful spindle, and long service life, making it an excellent choice for subcontracting and industrial production. Daewoo (now DN Solutions) machines are highly regarded worldwide for durability, accuracy, and ease of maintenance. Technical specifications: Pallet size: 500 × 500 mm Number of pallets: 6 Max. workpiece size. Ø800 × 1000 mm Max. workpiece weight. 800 kg Nljdox Htawepfx Aa Eob X-axis travel: 800 mm Y-axis travel: 650 mm Z-axis travel: 650 mm Spindle taper: BT50 Max. spindle speed: 6000 rpm Spindle motor power: 12 kW Tool magazine capacity: 120 tools Tool change type: Automatic CNC control: FANUC Rapid traverse (X/Y/Z): 24 m/min Machine dimensions (L × W × H): approx. 4.5 × 2.8 × 3.0 m Machine weight: approx. 12,000 kg General: Rigid box-type construction for stable heavy cutting High torque spindle suitable for steel and cast iron Excellent accuracy and repeatability Ideal for series production and flexible manufacturing Proven platform with strong spare parts availability Test run possible by appointment. Ask for the price delivered. Verify the details with the seller.

Condition: new, rated capacity 8,1 kVA voltage 400 / 230 V frequency 50 Hz Nedpou Imgfsfx Aa Eelb tank capacity 15 l engine output 11 / 15 KW / PS weight of the machine ca. 0,165 t dimensions of the machine ca. 0,88 x 0,56 x 0,76 m Diesel generator with: - equipped with electric start. - Equipped with automatic voltage regulator. - Air cooled - Mobile. - Direct injection - Low oil level alarm with auto-stop function.

Condition: used, Year of construction: 1996, Technical details: pressure: 300 t chamfer lenght: 6000 mm Nedpfxju Ib Dro Aa Eelb control: Delem DA 24e distance between columns: 2x5100 mm throat: 645 mm dayligth: 520 mm plate thickness: 5 mm total power requirement: ca. 10,0 je machine kW weight of the machine ca.: ges. ca. 66 t dimensions of machine: L:12,0xB:2,3xH:3,65 m Hydr. Pressbrake 6000-300 - jib arm length= 720mm - incl. back gauge (without crowning system) adjustment travel horizontal/vertical: 680/200mm motoric Optionally, two of these press brakes can be offered - also applicable as a Tandem Pressbrake with 2x 6 meter with 300t, with table size: W:165xL.12000mm, - program sequence via both presse(synchronized) and single available Optional are tools available! Copy of documentation available i.D. *

Condition: good (used), Year of construction: 2002, functionality: fully functional, FOR SALE: DAEWOO Lynx 210L CNC Lathe Compact and robust machine, ideal for the production of precision components. Technical Specifications Control System: FANUC Series 21i-T. Nedsy Sgnfjpfx Aa Eelb Turret: 12 tool stations. Clamping Device: Hydraulic 3-jaw chuck. Workpiece Support: Hydraulic tailstock included. Machining Dimensions (standard Lynx 210L): Max. turning diameter: ~280 mm. Max. turning length: ~500 mm. Manufacturer Data (Source: IMG_8345.jpeg) Model: Lynx 210L (Lynx 200 Series). Serial No.: L2002339. Total Weight: 4,240 kg.

Condition: used, functionality: fully functional, Year of construction: 2005, operating hours: 3,080 h, load capacity: 4,500 kg, lifting height: 6,050 mm, free lift: 1,800 mm, fuel type: gas, mast type: triplex, construction height: 2,780 mm, fork length: 1,200 mm, empty load weight: 7,500 kg, total length: 3,200 mm, drive type: Treibgas, construction width: 1,700 mm, LPG forklift Load center: 500 ISO Class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Technical condition: normal Front tire type: Superelastic Nodpfxovcf Rnj Aa Ejlb Front tire condition: 0 - 20% Rear tire type: Superelastic Rear tire condition: 0 - 20% Description: Thorough cleaning, new inspection with oil and filter change, new set of 6 black tires, overhaul according to FEM incl. approval. Side shifter, 3rd valve, front work lights, full free lift, twin tires,

Condition: ready for operation (used), Year of construction: 2000, operating hours: 2,900 h, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Perfectly functioning machine with sub-spindle, chip conveyor, tool presetting, and set of tool holders and manuals Nedpfx Aaexrggle Eolb

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, turning diameter over cross slide: 350 mm, turning diameter: 550 mm, spindle bore: 66 mm, spindle motor power: 15 W, chuck outer diameter: 201 mm, bar diameter (max.): 66 mm, collet bore: 66 mm, controller manufacturer: Fanuc, controller model: Fanuc 21i-T, Equipment: documentation/manual, TURRET POSITIONS: 12 PARTS CATCHER Nledpfjygidkox Aa Eeb TAILSTOCK CHIP CONVEYOR